scholarly journals Enhanced signal-to-noise ratios in frog hearing can be achieved through amplitude death

2013 ◽  
Vol 10 (87) ◽  
pp. 20130525 ◽  
Author(s):  
Kang-Hun Ahn
Keyword(s):  
High Sensitivity ◽  
Intrinsic Noise ◽  
Low Noise ◽  
Great Sensitivity ◽  
High Signal ◽  
Mechanical Stimuli ◽  
Signal To Noise ◽  
Amplitude Death ◽  
Hair Bundles

In the ear, hair cells transform mechanical stimuli into neuronal signals with great sensitivity, relying on certain active processes. Individual hair cell bundles of non-mammals such as frogs and turtles are known to show spontaneous oscillation. However, hair bundles in vivo must be quiet in the absence of stimuli, otherwise the signal is drowned in intrinsic noise. Thus, a certain mechanism is required in order to suppress intrinsic noise. Here, through a model study of elastically coupled hair bundles of bullfrog sacculi, we show that a low stimulus threshold and a high signal-to-noise ratio (SNR) can be achieved through the amplitude death phenomenon (the cessation of spontaneous oscillations by coupling). This phenomenon occurs only when the coupled hair bundles have inhomogeneous distribution, which is likely to be the case in biological systems. We show that the SNR has non-monotonic dependence on the mass of the overlying membrane, and find out that the SNR has maximum value in the region of amplitude death. The low threshold of stimulus through amplitude death may account for the experimentally observed high sensitivity of frog sacculi in detecting vibration. The hair bundles' amplitude death mechanism provides a smart engineering design for low-noise amplification.

Computationally Assisted Design of High Signal-to-Noise Photoinduced Electron Transfer-Based Voltage-Sensitive Dyes

2020 ◽  
Author(s):  
Rishikesh Kulkarni ◽  
Anneliese Gest ◽  
Chun Kei Lam ◽  
Benjamin Raliski ◽  
Feroz James ◽  
...  
Keyword(s):  
Electron Transfer ◽  
Dft Calculations ◽  
Photoinduced Electron Transfer ◽  
Density Functional ◽  
Embryonic Stem ◽  
High Sensitivity ◽  
Md Simulations ◽  
High Signal ◽  
Signal To Noise ◽  
Green Fluorescent

<p>High signal-to-noise optical voltage indicators will enable simultaneous interrogation of membrane potential in large ensembles of neurons. However, design principles for voltage sensors with high sensitivity and brightness remain elusive, limiting the applicability of voltage imaging. In this paper, we use molecular dynamics (MD) simulations and density functional theory (DFT) calculations to guide the design of a bright and sensitive green-fluorescent voltage-sensitive fluorophore, or VoltageFluor (VF dye), that uses photoinduced electron transfer (PeT) as a voltage-sensing mechanism. MD simulations predict an 11% increase in sensitivity due to membrane orientation, while DFT calculations predict an increase in fluorescence quantum yield, but a decrease in sensitivity due to a decrease in rate of PeT. We confirm these predictions by synthesizing a new VF dye and demonstrating that it displays the expected improvements by doubling the brightness and retaining similar sensitivity to prior VF dyes. Combining theoretical predictions and experimental validation has resulted in the synthesis of the highest signal-to-noise green VF dye to date. We use this new voltage indicator to monitor the electrophysiological maturation of human embryonic stem cell-derived medium spiny neurons. </p>

scholarly journals Methods for Voltage-Sensitive Dye Imaging of Rat Cortical Activity With High Signal-to-Noise Ratio

2007 ◽  
Vol 98 (1) ◽  
pp. 502-512 ◽  
Author(s):  
Michael T. Lippert ◽  
Kentaroh Takagaki ◽  
Weifeng Xu ◽  
Xiaoying Huang ◽  
Jian-Young Wu
Keyword(s):  
Dynamic Range ◽  
Signal To Noise Ratio ◽  
Field Potential ◽  
High Sensitivity ◽  
High Dynamic Range ◽  
High Signal ◽  
Blue Dye ◽  
Voltage Sensitive Dye ◽  
Imaging Device

We describe methods to achieve high sensitivity in voltage-sensitive dye (VSD) imaging from rat barrel and visual cortices in vivo with the use of a blue dye RH1691 and a high dynamic range imaging device (photodiode array). With an improved staining protocol and an off-line procedure to remove pulsation artifact, the sensitivity of VSD recording is comparable with that of local field potential recording from the same location. With this sensitivity, one can record from ∼500 individual detectors, each covering an area of cortical tissue 160 μm in diameter (total imaging field ∼4 mm in diameter) and a temporal resolution of 1,600 frames/s, without multiple-trial averaging. We can record 80–100 trials of intermittent 10-s trials from each imaging field before the VSD signal reduces to one half of its initial amplitude because of bleaching and wash-out. Taken together, the methods described in this report provide a useful tool for visualizing evoked and spontaneous waves from rodent cortex.

A Carbon-Based DNA Framework Nano–Bio Interface for Biosensing with High Sensitivity and a High Signal-to-Noise Ratio

ACS Sensors ◽  
2020 ◽  
Vol 5 (12) ◽  
pp. 3979-3987
Author(s):  
Jing Su ◽  
Wenhan Liu ◽  
Shixing Chen ◽  
Wangping Deng ◽  
Yanzhi Dou ◽  
...  
Keyword(s):  
Signal To Noise Ratio ◽  
High Sensitivity ◽  
High Signal ◽  
Signal To Noise ◽  
Noise Ratio ◽  
Carbon Based

scholarly journals Dual-Polarized Fiber Laser Sensor for Photoacoustic Microscopy

Sensors ◽  
2019 ◽  
Vol 19 (21) ◽  
pp. 4632 ◽  
Author(s):  
Lin ◽  
Liang ◽  
Jin ◽  
Wang
Keyword(s):  
Fiber Laser ◽  
Optical Resolution ◽  
High Sensitivity ◽  
Low Noise ◽  
Laser Sensor ◽  
Photoacoustic Microscopy ◽  
Label Free ◽  
Laser Sensors ◽  
Dual Polarized

Optical resolution photoacoustic microscopy (OR-PAM) provides high-resolution, label-free and non-invasive functional imaging for broad biomedical applications. Dual-polarized fiber laser sensors have high sensitivity, low noise, a miniature size, and excellent stability; thus, they have been used in acoustic detection in OR-PAM. Here, we review recent progress in fiber-laser-based ultrasound sensors for photoacoustic microscopy, especially the dual-polarized fiber laser sensor with high sensitivity. The principle, characterization and sensitivity optimization of this type of sensor are presented. In vivo experiments demonstrate its excellent performance in the detection of photoacoustic (PA) signals in OR-PAM. This review summarizes representative applications of fiber laser sensors in OR-PAM and discusses their further improvements.

scholarly journals Sequential average segmented microscopy for high signal-to-noise ratio motion-artifact-free in vivo heart imaging

2013 ◽  
Vol 4 (10) ◽  
pp. 2095 ◽  
Author(s):  
Claudio Vinegoni ◽  
Sungon Lee ◽  
Paolo Fumene Feruglio ◽  
Pasquina Marzola ◽  
Matthias Nahrendorf ◽  
...  
Keyword(s):  
Signal To Noise Ratio ◽  
Motion Artifact ◽  
High Signal ◽  
Signal To Noise ◽  
Heart Imaging ◽  
Noise Ratio

Photodetection Technology Based on Laser Coding Emission

2011 ◽  
Vol 189-193 ◽  
pp. 3745-3749 ◽  
Author(s):  
Jing Guo ◽  
He Zhang ◽  
Xiang Jin Zhang ◽  
Xiao Feng Wang
Keyword(s):  
High Sensitivity ◽  
Avalanche Photodiode ◽  
High Gain ◽  
Low Noise ◽  
High Signal ◽  
Weak Signal ◽  
Echo Signal ◽  
Long Distance ◽  
The Poor ◽  
Theory And Experiment

For the extremely weak echo signal and the poor anti-interference ability of the long-distance laser fuze, the high signal noise ratio (SNR) receiving system based on laser coding mode was designed. In order to improve the weak signal receiving ability, the avalanche photodiode (APD) with high sensitivity, low noise and high gain was adopted. And the optimum multiplication factor of APD when the system obtains the highest SNR was analyzed and calculated. Then, the amplifying circuit optimum matching with APD and the decoding circuit were designed, and validated by the experiments. The theory and experiment results indicate that the design is efficiency and capable to the long distance laser fuze, the system can exactly decode the weak laser coding signals received and export the ignition signal.

scholarly journals Self-Reset Image Sensor With a Signal-to-Noise Ratio Over 70 dB and Its Application to Brain Surface Imaging

2021 ◽  
Vol 15 ◽  
Author(s):  
Thanet Pakpuwadon ◽  
Kiyotaka Sasagawa ◽  
Mark Christian Guinto ◽  
Yasumi Ohta ◽  
Makito Haruta ◽  
...  
Keyword(s):  
Neural Activity ◽  
Signal To Noise Ratio ◽  
Image Sensor ◽  
Oxide Semiconductor ◽  
High Signal ◽  
Unstable State ◽  
Signal To Noise ◽  
Compact Size ◽  
Noise Ratio

In this study, we propose a complementary-metal-oxide-semiconductor (CMOS) image sensor with a self-resetting system demonstrating a high signal-to-noise ratio (SNR) to detect small intrinsic signals such as a hemodynamic reaction or neural activity in a mouse brain. The photodiode structure was modified from N-well/P-sub to P+/N-well/P-sub to increase the photodiode capacitance to reduce the number of self-resets required to decrease the unstable stage. Moreover, our new relay board was used for the first time. As a result, an effective SNR of over 70 dB was achieved within the same pixel size and fill factor. The unstable state was drastically reduced. Thus, we will be able to detect neural activity. With its compact size, this device has significant potential to become an intrinsic signal detector in freely moving animals. We also demonstrated in vivo imaging with image processing by removing additional noise from the self-reset operation.

scholarly journals Near-infrared turn-on fluorescent probe for discriminative detection of Cys and application in in vivo imaging

RSC Advances ◽  
2019 ◽  
Vol 9 (71) ◽  
pp. 41431-41437 ◽  
Author(s):  
Shaolong Qi ◽  
Lubao Zhu ◽  
Xinyu Wang ◽  
Jianshi Du ◽  
Qingbiao Yang ◽  
...  
Keyword(s):  
Fluorescent Probes ◽  
Biological Samples ◽  
In Vivo Imaging ◽  
Near Infrared ◽  
Signal To Noise Ratio ◽  
High Signal ◽  
Biological Detection ◽  
Signal To Noise ◽  
Turn On

Near-infrared (NIR) fluorescent probes are widely employed in biological detection because of their lower damage to biological samples, low background interference, and high signal-to-noise ratio.

Development and Characterization of an Electrocochleography-Guided Robotics-Assisted Cochlear Implant Array Insertion System

2021 ◽  
pp. 019459982110492
Author(s):  
Allan M. Henslee ◽  
Christopher R. Kaufmann ◽  
Matt D. Andrick ◽  
Parker T. Reineke ◽  
Viral D. Tejani ◽  
...  
Keyword(s):  
Cochlear Implant ◽  
Real Time ◽  
Signal To Noise Ratio ◽  
Electrode Array ◽  
High Signal ◽  
Animal Testing ◽  
Signal To Noise ◽  
Noise Ratio ◽  
Hearing Outcomes

Objective Electrocochleography (ECochG) is increasingly being used during cochlear implant (CI) surgery to detect and mitigate insertion-related intracochlear trauma, where a drop in ECochG signal has been shown to correlate with a decline in hearing outcomes. In this study, an ECochG-guided robotics-assisted CI insertion system was developed and characterized that provides controlled and consistent electrode array insertions while monitoring and adapting to real-time ECochG signals. Study Design Experimental research. Setting A research laboratory and animal testing facility. Methods A proof-of-concept benchtop study evaluated the ability of the system to detect simulated ECochG signal changes and robotically adapt the insertion. Additionally, the ECochG-guided insertion system was evaluated in a pilot in vivo sheep study to characterize the signal-to-noise ratio and amplitude of ECochG recordings during robotics-assisted insertions. The system comprises an electrode array insertion drive unit, an extracochlear recording electrode module, and a control console that interfaces with both components and the surgeon. Results The system exhibited a microvolt signal resolution and a response time <100 milliseconds after signal change detection, indicating that the system can detect changes and respond faster than a human. Additionally, animal results demonstrated that the system was capable of recording ECochG signals with a high signal-to-noise ratio and sufficient amplitude. Conclusion An ECochG-guided robotics-assisted CI insertion system can detect real-time drops in ECochG signals during electrode array insertions and immediately alter the insertion motion. The system may provide a surgeon the means to monitor and reduce CI insertion–related trauma beyond manual insertion techniques for improved CI hearing outcomes.

Sign in / Sign up

Export Citation Format

Share Document