scholarly journals Thermal Analysis of Protein Stability and Ligand Binding in Complex Media

2021 ◽  
Author(s):  
Matthew W. Eskew ◽  
Albert S. Benight
Keyword(s):  
Human Kidney ◽  
Model Systems ◽  
Complex Media ◽  
Expression Systems ◽  
Scanning Calorimetry ◽  
Crude Lysate ◽  
Dsc Measurements ◽  
Biotin Binding ◽  
Specific Proteins

ABSTRACTScreening of ligands that can bind to biologic products of in vitro expression systems typically requires some purification of the expressed biologic target. Such purification is often laborious and time consuming and a limiting challenge. What is required, that could represent an enormous advantage, is the ability to screen expressed proteins in the crude lysate stage without purification. For that purpose, we explore here the utility of differential scanning calorimetry (DSC) measurements for detecting the presence of specific proteins and their interactions with ligands in the complex media where they were prepared, i.e. crude lysates. Model systems were designed to mimic analogous conditions comparable to those that might be encountered in actual in vitro expression systems. Results are reported for several examples where DSC measurements distinctly showed differences in the thermal denaturation behaviors of the crude lysate alone, proteins and proteins plus binding ligands added to the crude lysate. Results were obtained for Streptavidin/Biotin binding in E. coli lysate, and binding of Angiotensin Converting Enzyme 2 (ACE2) by captopril or lisinopril in the lysate supernatant derived from cultured Human Kidney cells (HEK293). ACE2 binding by the reactive binding domain (RBC) of SARS-CoV-2 was also examined. Binding of ACE2 by RBC and lisinopril were similar and consistent with the reported ACE2 inhibitory activity of lisinopril.

Celecoxib potentiates antibiotic uptake by altering membrane potential and permeability in Staphylococcus aureus

2019 ◽  
Vol 74 (12) ◽  
pp. 3462-3472 ◽  
Author(s):  
Gajapati Y N Varma ◽  
Githavani Kummari ◽  
Pradip Paik ◽  
Arunasree M Kalle
Keyword(s):  
Staphylococcus Aureus ◽  
Membrane Potential ◽  
Model Systems ◽  
In Vivo Model ◽  
Pcr Analysis ◽  
Resistant Bacteria ◽  
Scanning Calorimetry ◽  
Drug Resistant Bacteria

Abstract Background We have shown previously that celecoxib enhances the antibacterial effect of antibiotics and has sensitized drug-resistant bacteria to antibiotics at low concentrations using in vitro and in vivo model systems and also using clinically isolated ESKAPE pathogens. Objectives To identify the mechanism of action of celecoxib in potentiating the effect of antibiotics on bacteria. Methods Toxicogenomic expression analysis of Staphylococcus aureus in the presence or absence of ampicillin, celecoxib or both was carried out by microarray followed by validation of microarray results by flow cytometry and real-time PCR analysis, cocrystal development and analysis. Results The RNA expression map clearly indicated a change in the global transcriptome of S. aureus in the presence of cells treated with ampicillin alone, which was similar to that of celecoxib-treated cells in co-treated cells. Several essential, non-essential and virulence genes such as α-haemolysin (HLA), enterotoxins and β-lactamase were differentially regulated in co-treated cells. Further detailed analysis of the expression data indicated that the ion transporters and enzymes of the lipid biosynthesis pathway were down-regulated in co-treated cells leading to decreased membrane permeability and membrane potential. Cocrystal studies using Powder-X-Ray Diffraction (PXRD) and differential scanning calorimetry (DSC) indicated interactions between celecoxib and ampicillin, which might help in the entry of antibiotics. Conclusions Although further studies are warranted, here we report that celecoxib alters membrane potential and permeability, specifically by affecting the Na+/K+ ion transporter, and thereby increases the uptake of ampicillin by S. aureus.

Human 3-dimensional liver organoids: in vitro model systems to study liver diseases

2020 ◽  
Author(s):  
H Gaitantzi ◽  
C Cai ◽  
S Asawa ◽  
K Böttcher ◽  
M Ebert ◽  
...  
Keyword(s):  
Liver Diseases ◽  
In Vitro Model ◽  
Model Systems ◽  
3 Dimensional ◽  
Vitro Model ◽  
Liver Organoids

Differentiated Scanning Calorimetry of Model Systems with Cocoa Butter

Food Industry ◽  
2020 ◽  
Vol 5 (2) ◽  
pp. 29-36
Author(s):  
Alexander Vereshchagin ◽  
Irina Reznichenko ◽  
Nikolay Bychin
Keyword(s):  
Cocoa Butter ◽  
Palm Olein ◽  
Palm Stearin ◽  
Model Systems ◽  
Scanning Calorimetry ◽  
Glucose Syrup ◽  
Polymorphic Modifications ◽  
Confectionery Products ◽  
System Temperature ◽  
Dsc Method

The article concerns the research specificity of model systems such as cocoa butter – palm olein, cocoa butter – sucrose and cocoa butter – glucose syrup by the differential scanning calorimetry (DSC) method. The researchers run experiments in the temperature range from –100 to –50°C at a heating rate of 10 °C/min. In the cacao butter – palm olein system an eutectic occurs with a palm olein content of 30.0 % indicating the limited solubility of palm olein in cocoa butter. In the cocoa butter – sucrose system, cocoa butter crystallizes as in the α-form (10,0– 30,0; 60.0–90.0 % MK), and as a mixture of α-and β-forms of MK (40.0; 50,0; 70,0 and 80.0 %). Sucrose stabilizes low-temperature polymorphic modifications of cocoa butter. In the cocoa butter – glucose syrup system, temperature of samples melting is 21-22 °C. This composition is promising for use as a filling of confectionery products and glazes production. In this regard, a man can use glucose syrup only in the candy cases production. The role of surfactants used for the formation and stabilization of cocoa butter polymorphs and increasing the thermal stability of the shock-lad without the introduction of palm stearin requires separate consideration.

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

The Development of Pemetrexed Diacid-Loaded Gelatin-Cloisite 30B (MMT) Nanocomposite for Improved Oral Efficacy Against Cancer: Characterization, In-Vitro and Ex-Vivo Assessment

2020 ◽  
Vol 17 (3) ◽  
pp. 246-256
Author(s):  
Kriti Soni ◽  
Ali Mujtaba ◽  
Md. Habban Akhter ◽  
Kanchan Kohli
Keyword(s):  
Drug Release ◽  
Oral Delivery ◽  
Ex Vivo ◽  
Confocal Laser ◽  
Release Mechanism ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
Cloisite 30B ◽  
Ft Ir

Aim: The intention of this investigation was to develop Pemetrexed Diacid (PTX)-loaded gelatine-cloisite 30B (MMT) nanocomposite for the potential oral delivery of PTX and the in vitro, and ex vivo assessment. Background: Gelatin/Cloisite 30 B (MMT) nanocomposites were prepared by blending gelatin with MMT in aqueous solution. Methods: PTX was incorporated into the nanocomposite preparation. The nanocomposites were investigated by Fourier Transmission Infra Red Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC), Scanning Electron Microscope (SEM) X-Ray Diffraction (XRD) and Confocal Laser Microscopy (CLSM). FT-IR of nanocomposite showed the disappearance of all major peaks which corroborated the formation of nanocomposites. The nanocomposites were found to have a particle size of 121.9 ± 1.85 nm and zeta potential -12.1 ± 0.63 mV. DSC thermogram of drug loaded nanocomposites indicated peak at 117.165 oC and 205.816 oC, which clearly revealed that the drug has been incorporated into the nanocomposite because of cross-linking of cloisite 30 B and gelatin in the presence of glutaraldehyde. Results: SEM images of gelatin show a network like structure which disappears in the nanocomposite. The kinetics of the drug release was studied in order to ascertain the type of release mechanism. The drug release from nanocomposites was in a controlled manner, followed by first-order kinetics and the drug release mechanism was found to be of Fickian type. Conclusion: Ex vivo gut permeation studies revealed 4 times enhancement in the permeation of drug present in the nanocomposite as compared to plain drug solution and were further affirmed by CLSM. Thus, gelatin/(MMT) nanocomposite could be promising for the oral delivery of PTX in cancer therapy and future prospects for the industrial pharmacy.

Mannose Conjugated Starch Nanoparticles for Preferential Targeting of Liver Cancer

2020 ◽  
Vol 17 ◽  
Author(s):  
Akhlesh Kumar Jain ◽  
Hitesh Sahu ◽  
Keerti Mishra ◽  
Suresh Thareja
Keyword(s):  
Side Effects ◽  
Liver Cancer ◽  
Entrapment Efficiency ◽  
Xrd Analysis ◽  
In Vitro Cytotoxicity ◽  
Physical Interaction ◽  
Scanning Calorimetry ◽  
Starch Nanoparticles

Aim: To design D-Mannose conjugated 5-Fluorouracil (5-FU) loaded Jackfruit seed starch nanoparticles (JFSSNPs) for site specific delivery. Background: Liver cancer is the third leading cause of death in world and fifth most often diagnosed cancer is the major global threat to public health. Treatment of liver cancer with conventional method bears several side effects, thus to undertake these side effects as a formulation challenge, it is necessary to develop novel target specific drug delivery system for the effective and better localization of drug into the proximity of target with restricting the movement of drug in normal tissues. Objective: To optimize and characterize the developed D-Mannose conjugated 5-Fluorouracil (5-FU) loaded Jackfruit seed starch nanoparticles (JFSSNPs) for effective treatment of liver cancer. Materials and methods: 5-FU loaded JFSSNPs were prepared and optimized formulation had higher encapsulation efficiency were conjugated with D-Mannose. These formulations were characterized for size, morphology, zeta potential, X-Ray Diffraction, and Differential Scanning Calorimetry. Potential of NPs were studied using in vitro cytotoxicity assay, in vivo kinetic studies and bio-distribution studies. Result and discussion: 5-Fluorouracil loaded NPs had particle size between 336 to 802nm with drug entrapment efficiency was between 64.2 to 82.3%. In XRD analysis, 5-FU peak was diminished in the diffractogram, which could be attributed to the successful incorporation of drug in amorphous form. DSC study suggests there was no physical interaction between 5- FU and Polymer. NPs showed sustained in vitro 5-FU release up to 2 hours. In vivo, mannose conjugated NPs prolonged the plasma level of 5-FU and assist selective accumulation of 5-FU in the liver (vs other organs spleen, kidney, lungs and heart) compared to unconjugated one and plain drug. Conclusion: In vivo, bio-distribution and plasma profile studies resulted in significantly higher concentration of 5- Fluorouracil liver suggesting that these carriers are efficient, viable, and targeted carrier of 5-FU treatment of liver cancer.

Injectable in-situ Forming Depot Of Doxycycline Hyclate/α-Cyclodextrin Complex using PLGA for Periodontitis Treatment: Preparation, Charac-terization, and In-Vitro Evaluation

2020 ◽  
Vol 17 ◽  
Author(s):  
Elham Khodaverdi ◽  
Farhad Eisvand ◽  
Mohammad Sina Nezami ◽  
Seyedeh Nesa Rezaeian Shiadeh ◽  
Hossein Kamali ◽  
...  
Keyword(s):  
Complex Form ◽  
Docking Studies ◽  
Morphological Properties ◽  
Burst Release ◽  
Cyclodextrin Complex ◽  
Doxycycline Hyclate ◽  
Scanning Calorimetry ◽  
In Situ Forming

Background:: Doxycycline (DOX) is used in treating a bacterial infection, especially for periodontitis treatment. Objective: To reduce irritation of DOX for subgingival administration and increase the chemical stability and against enzy-matic, the complex of α-cyclodextrin with DOX was prepared and loaded into injectable in situ forming implant based on PLGA. Methods:: FTIR, molecular docking studies, X-ray diffraction, and differential scanning calorimetry was performed to char-acterize the DOX/α-cyclodextrin complex. Finally, the in-vitro drug release and modeling, morphological properties, and cellular cytotoxic effects were also evaluated. Results:: The stability of DOX was improved with complex than pure DOX. The main advantage of the complex is the al-most complete release (96.31 ± 2.56 %) of the drug within 14 days of the implant, whereas in the formulation containing the pure DOX and the physical mixture the DOX with α-cyclodextrin release is reached to 70.18 ± 3.61 % and 77.03 ± 3.56 %, respectively. This trend is due to elevate of DOX stability in the DOX/ α-cyclodextrin complex form within PLGA implant that confirmed by the results of stability. Conclusion:: Our results were indicative that the formulation containing DOX/α-cyclodextrin complex was biocompatible and sustained-release with minimum initial burst release.

The Potential Migrated Mechanism of Water-Soluble Components in Pellets Prepared by Wet Extrusion/Spheronization: Effect of Drying Rate

2020 ◽  
Vol 17 ◽  
Author(s):  
Bingwei Wang ◽  
Jianping Liu ◽  
Zhenghua Li ◽  
Yulong Xia ◽  
Shuangshuang Zhang ◽  
...  
Keyword(s):  
Relative Humidity ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Drying Rate ◽  
Scanning Calorimetry ◽  
Drying Temperature ◽  
Wet Extrusion ◽  
Extrusion Spheronization ◽  
Soluble Components

Background: At present, there were numerous researches on the migration of components in tablets and granules, the investigation in the pharmaceutical literatrue concerning the effect of drying rate on the migration of water-soluble components of pellets was limited. Temperature and relative humidity (RH) were crucial parameters during the drying process which was an essential step in the preparation of pellets via wet extrusion/spheronization. To quantify these variables, the water loss percentage of pellets per minute was defined as drying rate. Objective: The study aimed to investigate the influence of drying rate on the migration of water-soluble components in wet pellets and the potential migrated mechanism. Methods: The pellets containing tartrazine as a water-soluble model drug and microcrystalline cellulose as a matrix former were prepared by extrusion/spheronization and dried at four different drying temperature and relative humidity. Afterward, the extent of migrated tartrazine was assessed regarding appearance, in-vitro dissolution test, Differential Scanning Calorimetry, X-Ray Powder Diffraction, Attenuated total reflectance Fourier transform infrared spectroscopy and Confocal Raman Mapping. Results: Results demonstrated that red spots of tartrazine appeared on the surface of pellets and more than 40% tartrazine were burst released within 5 minutes when pellets dried at 60℃/RH 10%. While pellets dried at 40℃/RH 80%, none of these aforementioned phenomena was observed. Conclusion: In conclusion, the faster drying rate was, the more tartrazine migrated to the exterior of pellets. Adjusting drying temperature and relative humidity appropriately could inhibit the migration of water-soluble components within wet extrusion/spheronization pellets.

scholarly journals Effect of dissolution rate and subsequent ion release on cytocompatibility properties of borophosphate glasses

2019 ◽  
Vol 5 (1) ◽  
pp. 85-97
Author(s):  
Nusrat Sharmin ◽  
Mohammad S. Hasan ◽  
Md. Towhidul Islam ◽  
Chengheng Pang ◽  
Fu Gu ◽  
...  
Keyword(s):  
Dissolution Rate ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Ion Release ◽  
Scanning Calorimetry ◽  
Cell Culture Study ◽  
Borophosphate Glasses ◽  
Mg63 Cells

AbstractPresent work explores the relationship between the composition, dissolution rate, ion release and cytocompatibility of a series of borophosphate glasses. While, the base glass was selected to be 40mol%P2O5-16mol%CaO-24mol%MgO-20mol%Na2O, three B2O3 modified glass compositions were formulated by replacing Na2O with 1, 5 and 10 mol% B2O3. Ion release study was conducted using inductively coupled plasma atomic emission spectroscopy (ICP-AES). The thermal scans of the glasses as determined by differential scanning calorimetry (DSC) revealed an increment in the thermal properties with increasing B2O3 content in the glasses. On the other hand, the dissolution rate of the glasses decreased with increasing B2O3 content. To identify the effect of boron ion release on the cytocompatibility properties of the glasses, MG63 cells were cultured on the surface of the glass discs. The in vitro cell culture study suggested that glasses with 5 mol% B2O3 (P40B5) showed better cell proliferation and metabolic activity as compares to the glasses with 10 mol% (P40B10) or with no B2O3 (P40B0). The confocal laser scanning microscopy (CLSM) images of live/dead stained MG63 cells attached to the surface of the glasses also revealed that the number of dead cells attached to P40B5 glasses were significantly lower than both P40B0 and P40B10 glasses.

Sign in / Sign up

Export Citation Format

Share Document