scholarly journals Modified design and use of a high-pressure environmental stage for laboratory X-ray powder diffractometers

2008 ◽  
Vol 41 (2) ◽  
pp. 350-355 ◽  
Author(s):  
Pamela S. Whitfield ◽  
A. Victoria Nawaby ◽  
Brian Blak ◽  
James Ross

The popularity of supercritical CO2for materials processing makes thein situstudy of pressures up to 10 MPa in the laboratory particularly interesting. This paper describes a modified design for a 12.4 MPa (1800 psi) variable-temperature pressure vessel based on an existing cell reported by Koster van Groos, Guggenheim & Cornell [Rev. Sci. Instrum.(2003),74, 273–275]. The modifications satisfied the demands of the American Society of Mechanical Engineers design code 31.3, leading to legal design registration, construction and subsequent hydrostatic test. The thinner windows that the finite element analysis indicated as sufficient allow for rapid data collection, even using a laboratory-based Mo source. This type of application is demonstrated with a time-resolved data set showing the crystallization of a polylactic acid–clay nanocomposite under 6.8 MPa CO2.

2020 ◽  
Author(s):  
Luzia S. Germann ◽  
Sebastian T. Emmerling ◽  
Manuel Wilke ◽  
Robert E. Dinnebier ◽  
Mariarosa Moneghini ◽  
...  

Time-resolved mechanochemical cocrystallisation studies have so-far focused solely on neat and liquid-assisted grinding. Here, we report the monitoring of polymer-assisted grinding reactions using <i>in situ</i> X-ray powder diffraction, revealing that reaction rate is almost double compared to neat grinding and independent of the molecular weight and amount of used polymer additives.<br>


2019 ◽  
Author(s):  
Hao Wu ◽  
Jeffrey Ting ◽  
Siqi Meng ◽  
Matthew Tirrell

We have directly observed the <i>in situ</i> self-assembly kinetics of polyelectrolyte complex (PEC) micelles by synchrotron time-resolved small-angle X-ray scattering, equipped with a stopped-flow device that provides millisecond temporal resolution. This work has elucidated one general kinetic pathway for the process of PEC micelle formation, which provides useful physical insights for increasing our fundamental understanding of complexation and self-assembly dynamics driven by electrostatic interactions that occur on ultrafast timescales.


Carbon ◽  
2015 ◽  
Vol 87 ◽  
pp. 246-256 ◽  
Author(s):  
Périne Landois ◽  
Mathieu Pinault ◽  
Stéphan Rouzière ◽  
Dominique Porterat ◽  
Cristian Mocuta ◽  
...  

2017 ◽  
Vol 111 (8) ◽  
pp. 082907 ◽  
Author(s):  
Seiji Nakashima ◽  
Osami Sakata ◽  
Hiroshi Funakubo ◽  
Takao Shimizu ◽  
Daichi Ichinose ◽  
...  

2013 ◽  
Vol 374 ◽  
pp. 23-30 ◽  
Author(s):  
H. Nguyen-Thi ◽  
G. Reinhart ◽  
G. Salloum Abou Jaoude ◽  
R.H. Mathiesen ◽  
G. Zimmermann ◽  
...  

2008 ◽  
Vol 72 (1) ◽  
pp. 201-204 ◽  
Author(s):  
A. Sumoondur ◽  
S. Shaw ◽  
I. Ahmed ◽  
L. G. Benning

AbstractIn this study, direct evidence for the formation of magnetite via a green rust intermediate is reported. The Fe(II) induced transformation of ferrihydrite, was quantified in situ and under O2-free conditions using synchrotron-based time-resolved energy dispersive X-ray diffraction. At pH 9 and Fe(II)/Fe(III) ratios of 0.5 and 1, rapid growth (6 min) of sulphate green rust and its subsequent transformation to magnetite was observed. Electron microscopy confirmed these results, showing the initial rapid formation of hexagonal sulphate green rust particles, followed by the corrosion of the green rust as magnetite growth occurred, indicating that the reaction proceeds via a dissolution-reprecipitation mechanism. At pH 7 and Fe(II)/Fe(III) ratio of 0.5, sulphate green rust was the stable phase, with no transformation to magnetite.


1998 ◽  
Vol 21 (4-6) ◽  
pp. 253-262 ◽  
Author(s):  
Dermot O'Hare ◽  
John S.O. Evans ◽  
Robin J. Francis ◽  
P. Shiv Halasyamani ◽  
Poul Norby ◽  
...  

2014 ◽  
Vol 70 (a1) ◽  
pp. C1138-C1138
Author(s):  
Chiaki Tsuboi ◽  
Kazuki Aburaya ◽  
Shingo Higuchi ◽  
Fumiko Kimura ◽  
Masataka Maeyama ◽  
...  

We have developed magnetically oriented microcrystal array (MOMA) technique that enables single crystal X-ray diffraction analyses from microcrystalline powder. In this method, microcrystals suspended in a UV-curable monomer matrix are there-dimensionally aligned by special rotating magnetic field, followed by consolidation of the matrix by photopolymerization. From thus achieved MOMAs, we have been succeeded in crystal structure analysis for some substances [1, 2]. Though MOMA method is an effective technique, it has some problems as follows: in a MOMA, the alignment is deteriorated during the consolidation process. In addition, the sample microcrystals cannot be recovered from a MOMA. To overcome these problems, we performed an in-situ X-ray diffraction measurement using a three-dimensional magnetically oriented microcrystal suspension (3D MOMS) of L-alanine. An experimental setting of the in-situ X-ray measurement of MOMS is schematically shown in the figure. L-alanine microcrystal suspension was poured into a glass capillary and placed on the rotating unit equipped with a pair of neodymium magnets. Rotating X-ray chopper with 10°-slits was placed between the collimator and the suspension. By using this chopper, it was possible to expose the X-ray only when the rotating MOMS makes a specific direction with respect to the impinging X-ray. This has the same effect as the omega oscillation in conventional single crystal measurement. A total of 22 XRD images of 10° increments from 0° to 220° were obtained. The data set was processed by using conventional software to obtain three-dimensional molecular structure of L-alanine. The structure is in good agreement with that reported for the single crystal. R1 and wR2 were 6.53 and 17.4 %, respectively. RMSD value between the determined molecular structure and the reported one was 0.0045 Å. From this result, we conclude that this method can be effective and practical to be used widely for crystal structure analyses.


Sign in / Sign up

Export Citation Format

Share Document