Major upgrade of the synchrotron radiation calculation code SPECTRA

2021 ◽  
Vol 28 (4) ◽  
Author(s):  
Takashi Tanaka

Since the first release in 2001, the synchrotron radiation calculation code SPECTRA has been used by many users and continuously upgraded to answer the requests and feedbacks from the users. Although such an incremental upgrade made in nearly two decades has significantly enhanced the capability of SPECTRA, the source code has become much more complicated, and thus the maintenance and further improvement are rather troublesome. To solve this issue, and to take advantage of the recent progress in the programming language, a major upgrade has been made as presented in this paper, in which a number of new features and advanced functions are implemented as well.

2020 ◽  
Author(s):  
Cut Nabilah Damni

AbstrakSoftware komputer atau perangkat lunak komputer merupakan kumpulan instruksi (program atau prosedur) untuk dapat melaksanakan pekerjaan secara otomatis dengan cara mengolah atau memproses kumpulan intruksi (data) yang diberikan. (Yahfizham, 2019 : 19) Sebagian besar dari software komputer dibuat oleh (programmer) dengan menggunakan bahasa pemprograman. Orang yang membuat bahasa pemprograman menuliskan perintah dalam bahasa pemprograman seperti layaknya bahasa yang digunakan oleh orang pada umumnya dalam melakukan perbincangan. Perintah-perintah tersebut dinamakan (source code). Program komputer lainnya dinamakan (compiler) yang digunakan pada (source code) dan kemudian mengubah perintah tersebut kedalam bahasa yang dimengerti oleh komputer lalu hasilnya dinamakan program executable (EXE). Pada dasarnya, komputer selalu memiliki perangkat lunak komputer atau software yang terdiri dari sistem operasi, sistem aplikasi dan bahasa pemograman.AbstractComputer software or computer software is a collection of instructions (programs or procedures) to be able to carry out work automatically by processing or processing the collection of instructions (data) provided. (Yahfizham, 2019: 19) Most of the computer software is made by (programmers) using the programming language. People who make programming languages write commands in the programming language like the language used by people in general in conducting conversation. The commands are called (source code). Other computer programs called (compilers) are used in (source code) and then change the command into a language understood by the computer and the results are called executable programs (EXE). Basically, computers always have computer software or software consisting of operating systems, application systems and programming languages.


2019 ◽  
Vol 16 (5) ◽  
pp. 478-491 ◽  
Author(s):  
Faizan Abul Qais ◽  
Mohd Sajjad Ahmad Khan ◽  
Iqbal Ahmad ◽  
Abdullah Safar Althubiani

Aims: The aim of this review is to survey the recent progress made in developing the nanoparticles as antifungal agents especially the nano-based formulations being exploited for the management of Candida infections. Discussion: In the last few decades, there has been many-fold increase in fungal infections including candidiasis due to the increased number of immunocompromised patients worldwide. The efficacy of available antifungal drugs is limited due to its associated toxicity and drug resistance in clinical strains. The recent advancements in nanobiotechnology have opened a new hope for the development of novel formulations with enhanced therapeutic efficacy, improved drug delivery and low toxicity. Conclusion: Metal nanoparticles have shown to possess promising in vitro antifungal activities and could be effectively used for enhanced and targeted delivery of conventionally used drugs. The synergistic interaction between nanoparticles and various antifungal agents have also been reported with enhanced antifungal activity.


2021 ◽  
Vol 11 (7) ◽  
pp. 2971
Author(s):  
Siwei Tao ◽  
Congxiao He ◽  
Xiang Hao ◽  
Cuifang Kuang ◽  
Xu Liu

Numerous advances have been made in X-ray technology in recent years. X-ray imaging plays an important role in the nondestructive exploration of the internal structures of objects. However, the contrast of X-ray absorption images remains low, especially for materials with low atomic numbers, such as biological samples. X-ray phase-contrast images have an intrinsically higher contrast than absorption images. In this review, the principles, milestones, and recent progress of X-ray phase-contrast imaging methods are demonstrated. In addition, prospective applications are presented.


Nanomaterials ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 28
Author(s):  
Anastasios I. Tsiotsias ◽  
Nikolaos D. Charisiou ◽  
Ioannis V. Yentekakis ◽  
Maria A. Goula

CO2 methanation has recently emerged as a process that targets the reduction in anthropogenic CO2 emissions, via the conversion of CO2 captured from point and mobile sources, as well as H2 produced from renewables into CH4. Ni, among the early transition metals, as well as Ru and Rh, among the noble metals, have been known to be among the most active methanation catalysts, with Ni being favoured due to its low cost and high natural abundance. However, insufficient low-temperature activity, low dispersion and reducibility, as well as nanoparticle sintering are some of the main drawbacks when using Ni-based catalysts. Such problems can be partly overcome via the introduction of a second transition metal (e.g., Fe, Co) or a noble metal (e.g., Ru, Rh, Pt, Pd and Re) in Ni-based catalysts. Through Ni-M alloy formation, or the intricate synergy between two adjacent metallic phases, new high-performing and low-cost methanation catalysts can be obtained. This review summarizes and critically discusses recent progress made in the field of bimetallic Ni-M (M = Fe, Co, Cu, Ru, Rh, Pt, Pd, Re)-based catalyst development for the CO2 methanation reaction.


Nanomaterials ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 2039 ◽  
Author(s):  
Adriano Panepinto ◽  
Rony Snyders

In this paper, we overview the recent progress we made in the magnetron sputtering-based developments of nano-sculpted thin films intended for energy-related applications such as energy conversion. This paper summarizes our recent experimental work often supported by simulation and theoretical results. Specifically, the development of a new generation of nano-sculpted photo-anodes based on TiO2 for application in dye-sensitized solar cells is discussed.


2018 ◽  
Vol 20 (21) ◽  
pp. 4764-4789 ◽  
Author(s):  
Adrian Zajac ◽  
Rafal Kukawka ◽  
Anna Pawlowska-Zygarowicz ◽  
Olga Stolarska ◽  
Marcin Smiglak

The review presents the recent progress made in the field of ionic liquids bearing bioactive components, with a particular emphasis on their use as chemical tools in agriculture and the preservation of agricultural products.


2021 ◽  
Vol 15 (4) ◽  
pp. 541-545
Author(s):  
Ugur Comlekcioglu ◽  
Nazan Comlekcioglu

Many solutions such as percentage, molar and buffer solutions are used in all experiments conducted in life science laboratories. Although the preparation of the solutions is not difficult, miscalculations that can be made during intensive laboratory work negatively affect the experimental results. In order for the experiments to work correctly, the solutions must be prepared completely correctly. In this project, a software, ATLaS (Assistant Toolkit for Laboratory Solutions), has been developed to eliminate solution errors arising from calculations. Python programming language was used in the development of ATLaS. Tkinter and Pandas libraries were used in the program. ATLaS contains five main modules (1) Percent Solutions, (2) Molar Solutions, (3) Acid-Base Solutions, (4) Buffer Solutions and (5) Unit Converter. Main modules have sub-functions within themselves. With PyInstaller, the software was converted into a stand-alone executable file. The source code of ATLaS is available at https://github.com/cugur1978/ATLaS.


KOMTEKINFO ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 84-91
Author(s):  
Hari Marfalino ◽  
Larissa Rani ◽  
Mardison ◽  
Ichsan Pribadi

The development of technology and information is felt very rapidly and this affects aspects of work that make work easier, one of which is the development of mobile technology, information media can now be made in the form of mobile applications, using mobile technology in the form of tourist applications, which provide information - information about tourism in the district of Solok Selatan, the search for tourism information in the district of Solok Selatan will be more practical to use and users can use this application wherever they are, this application can be used as a medium of knowledge about tourism in Solok Selatan district. This Solok Selatan tourist application is expected to be able to provide more knowledge about Solok Selatan tourism to the wider community, especially the people of Solok Selatan District.


Sign in / Sign up

Export Citation Format

Share Document