Using existing site surveillance cameras to automatically measure the installation speed in prefabricated timber construction

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Alireza Ahmadian Fard Fini ◽  
Mojtaba Maghrebi ◽  
Perry John Forsythe ◽  
Travis Steven Waller
Keyword(s):  
Time Window ◽  
Low Cost ◽  
Transformation Method ◽  
Digital Design ◽  
Spatial Transformation ◽  
Exact Matching ◽  
Productivity Measurement ◽  
Content Type ◽  
Surveillance Camera ◽  
Automated Method

PurposeMeasuring onsite productivity has been a substance of debate in the construction industry, mainly due to concerns about accuracy, repeatability and unbiasedness. Such characteristics are central to demonstrate construction speed that can be achieved through adopting new prefabricated systems. Existing productivity measurement methods, however, cannot cost-effectively provide solid and replicable evidence of prefabrication benefits. This research proposes a low-cost automated method for measuring onsite installation productivity of prefabricated systems.Design/methodology/approachFirstly, the captured ultra-wide footages are undistorted by extracting the curvature contours and performing a developed meta-heuristic algorithm to straighten these contours. Then a preprocessing algorithm is developed that could automatically detect and remove the noises caused by vibrations and movements. Because this study aims to accurately measure the productivity the noise free images are double checked in a specific time window to make sure that even a tiny error, which have not been detected in the previous steps, will not been amplified through the process. In the next step, the existing side view provided by the camera is converted to a top view by using a spatial transformation method. Finally, the processed images are compared with the site drawings in order to detect the construction process over time and report the measured productivity.FindingsThe developed algorithms perform nearly real-time productivity computations through exact matching of actual installation process and digital design layout. The accuracy and noninterpretive use of the proposed method is demonstrated in construction of a multistorey cross-laminated timber building.Originality/valueThis study uses footages of an already installed surveillance camera where the camera's features are unknown and then image processing algorithms are deployed to retrieve accurate installation quantities and cycle times. The algorithms are almost generalized and versatile to be adjusted to measure installation productivity of other prefabricated building systems.

Value communication: low-cost marketing initiatives for “Guru Ki Bani 58282”

2013 ◽  
Vol 3 (3) ◽  
pp. 1-9
Author(s):  
Neeraj Pandey ◽  
Gaganpreet Singh
Keyword(s):  
Interactive Voice Response ◽  
Low Cost ◽  
Value Added ◽  
Subject Area ◽  
Marketing Management ◽  
Digital Marketing ◽  
Content Type ◽  
Mba Students ◽  
Marketing Team ◽  
Value Communication

Subject area Pricing, digital marketing, marketing management and strategic marketing. Study level/applicability The case can be used for pricing or digital marketing courses as well as marketing management courses to MBA students and/or for management development programmes. Case overview Goldfinch Mobile Solutions, a Hong-Kong based value added services (VAS) and gaming platform provider, had an exclusive tie up with Bharti Airtel in India for providing value added voice applications on an interactive voice response system (IVRS) platform. The Goldfinch flagship service is “Guru Ki Bani” which may be subscribed to by dialing the short code 58282. This “58282” service has a repository of all Sikh religion daily prayers, religious songs, teachings, stories from Guru's life and similar information that is derived from the Sikh Holy book Guru Granth Sahib Ji. As per mutual agreement between Goldfinch Mobile Solutions and Bharti Airtel, the telecom operator had the responsibility to promote Goldfinch's Guru Ki Bani service amongst its subscriber base through its below the line (BTL) promotional channels such as short messaging service (SMS), outbound calls, cell information, notification SMS after call and above the line (ATL) activities such as posters, leaflets, print, promoters, regional TV, outdoors, etc. The revenue sharing arrangement between Airtel and Golfinch was in the ratio of 75 percent and 25 percent. However, with recent changes in the policies of Telephone Regulatory Authority of India (TRAI), promotional marketing used by telecom operators has been constrained. Declining customer share, decreasing profits (after Bharti Airtel halted promotions) and increasing organization cost per customer have made MD and CEO Mr Newton Bubber think of various options including low-cost marketing initiatives besides digital marketing to promote Guru Ki Bani services. Value communication to its huge potential customer base, i.e. 184.19 million Bharti Airtel subscribers was another challenge facing Mr Newton and his marketing team at Goldfinch. Expected learning outcomes The case enables students to learn the concepts and application of value creation, effective value communication, price waterfall analysis, importance of costing parameters in pricing decisions, low-cost marketing strategies and digital marketing. Supplementary materials Teaching notes are available for educators only. Please contact your library to gain login details or email [email protected] to request teaching notes.

A review of passive self-sensing tag

Sensor Review ◽  
2017 ◽  
Vol 37 (3) ◽  
pp. 338-345 ◽  
Author(s):  
Yawei Xu ◽  
Lihong Dong ◽  
Haidou Wang ◽  
Jiannong Jing ◽  
Yongxiang Lu
Keyword(s):  
Radio Frequency Identification ◽  
Large Scale ◽  
Low Cost ◽  
Integrated Sensor ◽  
Content Type ◽  
Passive Sensing ◽  
Static Information ◽  
Potential Applications ◽  
Frequency Identification ◽  
Identification Tags

Purpose Radio frequency identification tags for passive sensing have attracted wide attention in the area of Internet of Things (IoT). Among them, some tags can sense the property change of objects without an integrated sensor, which is a new trend of passive sensing based on tag. The purpose of this paper is to review recent research on passive self-sensing tags (PSSTs). Design/methodology/approach The PSSTs reported in the past decade are classified in terms of sensing mode, composition and the ways of power supply. This paper presents operation principles of PSSTs and analyzes the characteristics of them. Moreover, the paper focuses on summarizing the latest sensing parameters of PSSTs and their matching equipment. Finally, some potential applications and challenges faced by this emerging technique are discussed. Findings PSST is suitable for long-term and large-scale monitoring compared to conventional sensors because it gets rid of the limitation of battery and has relatively low cost. Also, the static information of objects stored in different PSSTs can be identified by a single reader without touch. Originality/value This paper provides a detailed and timely review of the rapidly growing research in PSST.

Social media: a blessing or a curse? Voice of owners in the beauty and wellness industry

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Kulvinder Kaur ◽  
Pawan Kumar
Keyword(s):  
Social Media ◽  
Low Cost ◽  
Growth Potential ◽  
Social Media Marketing ◽  
Small Scale ◽  
Content Type ◽  
Social Media Platforms ◽  
Pros And Cons ◽  
Marketing Tool ◽  
Use Of Internet

PurposeThe rise in the use of Internet technologies and social media has shifted the marketing practices from offline to online. This study aims to determine the pros and cons of social media marketing in the beauty and wellness industry.Design/methodology/approachIn-depth interviews were conducted with the owners and marketing executives of beauty and wellness centers to understand the use of popular social media platforms in this industry and their pros and cons.FindingsThe researchers identified eight merits and seven demerits of social media in the beauty and wellness industry. Every respondent is happy and satisfied with social media use, particularly Instagram and Facebook. Irrespective of the demerits, they have shown the intention to increase its usage in the future. The merits override demerits; thus, social media is a blessing for this industry from the owners' perspective.Research limitations/implicationsThe research is exploratory and is confined to just one industry. Research implication is that the visual nature of social media makes it a powerful tool for the promotion of the beauty and wellness industry.Practical implicationsThe study's findings will be beneficial for small-scale businesses as it will push them to take advantage of this low-cost marketing tool.Social implicationsSocial media marketing is helpful for communication and marketing purposes for society.Originality/valueThe beauty and wellness industry remained unfocused by researchers because it is highly unorganized, fragmented and not regulated, yet has huge growth potential. This research will provide a closer look at this industry as well as social media marketing.

Virtual medical learning: a comprehensive study on the role of new technologies

Kybernetes ◽  
2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mi Tang ◽  
Hongmei Zhou ◽  
Qingyan Yan ◽  
Ruoyu Li ◽  
Hui Lu
Keyword(s):  
Literature Review ◽  
New Technologies ◽  
Low Cost ◽  
Access Point ◽  
Learning Technologies ◽  
Learning Technology ◽  
Content Type ◽  
Services Delivery ◽  
Medical Learning ◽  
Intellectual Knowledge

PurposeHealthcare employs informatics to offer its services through information technology where the social network can aid virtual medical learning. Since the usage of the internet and other electronic tools for medical services delivery is at the initial stage, it is essential to examine the factors that condition patients and medical elements in a virtual environment can develop relationship models on the health services. So, the authors have systematically reviewed virtual medical learning and offered some suggestions for the upcoming works. The authors have also discovered gaps in the state-of-the-art papers and provided solutions for them.Design/methodology/approachNumerous novel advancements have changed the old exercise of therapeutic and analytic learning. Virtual spaces have quickly turned into a section of the learning technology vision. Given the importance of its achievements and endless low-cost expansion of the educational system, virtual education has been considered as one of the issues raised by the information communities. Medicine and health are some of the most important fields in virtual technologies. Hence, in this paper, we have used a systematic literature review to deeply examine virtual medical learning. After establishing exclusion and inclusion criteria, an independent systematic search in Google Scholar, ACM, Scopus, Eric, Science Direct, Springer link, Emerald, Global ProQuest and IEEE for relevant studies have been performed, and 21 papers have been analyzed. Detailed data have been mined out of the papers.FindingsThe authors have found that virtual medical learning improves and expands the knowledge core and meaningfully affects the exercise. Virtual learning (VL) has been used in many therapeutic zones, like therapeutic learning, surgery, diagnosing, combining and regularizing processes. It has presented a fundamental access point and a referral mechanism for all of a course's component communities. It can also simplify communicative education, allowing learners to get abilities before applying them in a real-world situation. Also, the communicative characteristics of different VL programs can somehow be like direct teaching.Research limitations/implicationsSome excellent work may be removed owing to applying the filters to select the primary papers. Surveying all the documents on the topic of virtual medical learning is impossible, too. Nevertheless, the authors have tried to present a perfect survey of virtual medical learning. The results will be helpful for scholars to propose better virtual medical learning techniques.Practical implicationsE-learning has become an indispensable additional learning tool in medical education. The introduction of new learning technologies, the exponential growth of Internet usage and the advent of the World Wide Web can change the face of higher education. The results will be helpful for scholars for the upcoming works. The application of a literature review of partial least squares theory was useful for offering comprehensive literary coverage and completing the knowledge development analysis. The authors have backed scholars and experts for better understanding the development of virtual medical learning systems via presenting comparative data and scrutinizing the present advances.Originality/valueThe paper enhances intellectual knowledge by improving the conception of virtual medical learning. It informs the development, use of virtual medical learning and the upcoming works. The lack of comprehensive papers in this field has increased the importance of this paper. The present paper can handle the pace of publications.

Modern nanobiotechnologies for efficient detection and remediation of mercury

Sensor Review ◽  
2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mulayam Singh Gaur ◽  
Rajni Yadav ◽  
Mamta Kushwah ◽  
Anna Nikolaevna Berlina
Keyword(s):  
Heavy Metals ◽  
Water Samples ◽  
Low Cost ◽  
High Sensitivity ◽  
Environmental Water ◽  
Mercury Ions ◽  
Content Type ◽  
Efficient Detection ◽  
Sensitivity And Selectivity ◽  
Selection Of

Purpose This information will be useful in the selection of materials and technology for the detection and removal of mercury ions at a low cost and with high sensitivity and selectivity. The purpose of this study is to provide the useful information for selection of materials and technology to detect and remove the mercury ions from water with high sensitivity and selectivity. The purpose of this study is to provide the useful information for selection of materials and technology to detect and remove the mercury ions from water with high sensitivity and selectivity. Design/methodology/approach Different nano- and bio-materials allowed for the development of a variety of biosensors – colorimetric, chemiluminescent, electrochemical, whole-cell and aptasensors – are described. The materials used for their development also make it possible to use them in removing heavy metals, which are toxic contaminants, from environmental water samples. Findings This review focuses on different technologies, tools and materials for mercury (heavy metals) detection and remediation to environmental samples. Originality/value This review gives up-to-date and systemic information on modern nanotechnology methods for heavy metal detection. Different recognition molecules and nanomaterials have been discussed for remediation to water samples. The present review may provide valuable information to researchers regarding novel mercury ions detection sensors and encourage them for further research/development.

Optimisation of geotechnical surveys using a BIM-based geostatistical analysis

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Elham Mahmoudi ◽  
Marcel Stepien ◽  
Markus König
Keyword(s):  
Experimental Design ◽  
Data Structures ◽  
Digital Design ◽  
Ground Model ◽  
Content Type ◽  
Design Environments ◽  
Spatial Estimation ◽  
Computational Performance ◽  
Geological Models ◽  
The Impact

PurposeA principle prerequisite for designing and constructing an underground structure is to estimate the subsurface's properties and obtain a realistic picture of stratigraphy. Obtaining direct measure of these values in any location of the built environment is not affordable. Therefore, any evaluation is afflicted with uncertainty, and we need to combine all available measurements, observations and previous knowledge to achieve an informed estimate and quantify the involved uncertainties. This study aims to enhance the geotechnical surveys based on a spatial estimation of subsoil to customised data structures and integrating the ground models into digital design environments.Design/methodology/approachThe present study's objective is to enhance the geotechnical surveys based on a spatial estimation of subsoil to customised data structures and integrating the ground models into digital design environments. A ground model consisting of voxels is developed via Revit-Dynamo to represent spatial uncertainties employing the kriging interpolation method. The local arrangement of new surveys are evaluated to be optimised.FindingsThe visualisation model's computational performance is modified by using an octree structure. The results show that it adapts the structure to be modelled more efficiently. The proposed concept can identify the geological models' risky locations for further geological investigations and reveal an optimised experimental design. The modifications criteria are defined in global and local considerations.Originality/valueIt provides a transparent and repeatable approach to construct a spatial ground model for subsequent experimental or numerical analysis. In the first attempt, the ground model was discretised by a grid of voxels. In general, the required computing time primarily depends on the size of the voxels. This issue is addressed by implementing octree voxels to reduce the computational efforts. This applies especially to the cases that a higher resolution is required. The investigations using a synthetic soil model showed that the developed methodology fulfilled the kriging method's requirements. The effects of variogram parameters, such as the range and the covariance function, were investigated based on some parameter studies. Moreover, a synthetic model is used to demonstrate the optimal experimental design concept. Through the implementation, alternative locations for new boreholes are generated, and their uncertainties are quantified. The impact of the new borehole on the uncertainty measures are quantified based on local and global approaches. For further research to identify the geological models' risky spots, the development of this approach with additional criteria regarding the search neighbourhood and consideration of barriers and trends in real cases (by employing different interpolation methodologies) should be considered.

Preparation and application of water-based nano-silver conductive ink in paper-based 3D printing

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Chenfei Zhao ◽  
Jun Wang ◽  
Lini Lu
Keyword(s):  
Flexible Electronics ◽  
Low Cost ◽  
Methyl Cellulose ◽  
Conductive Ink ◽  
Content Type ◽  
Nano Silver ◽  
Printed Circuit ◽  
Silver Ink ◽  
Sintering Time ◽  
Water Based

Purpose In flexible electronics applications, organic inks are mostly used for inkjet printing. Three-dimensional (3 D) printing technology has the advantages of low cost, high speed and good precision in modern electronic printing. The purpose of this study is to solve the high cost of traditional printing and the pollution emissions of organic ink. It is necessary to develop a water-based conductive ink that is easily degradable and can be 3 D printed. A nano-silver ink printed circuit pattern with high precision, high conductivity and good mechanical properties is a promising strategy. Design/methodology/approach The researched nano-silver conductive ink is mainly composed of silver nanoparticles and resin. The effect of adding methyl cellulose on the ink was also explored. A simple 3 D circuit pattern was printed on photographic paper. The line width, line length, line thickness and conductivity of the printed circuit were tested. The influence of sintering temperature and sintering time on pattern resistivity was studied. The relationship between circuit pattern bending performance and electrical conductivity is analyzed. Findings The experimental results show that the ink has the characteristics of low silver content and good environmental protection effect. The printing feasibility of 3 D printing circuit patterns on paper substrates was confirmed. The best printing temperature is 160°C–180°C, and the best sintering time is 30 min. The circuit pattern can be folded 120°, and the cycle is folded more than 60 times. The minimum resistivity of the circuit pattern is 6.07 µΩ·cm. Methyl cellulose can control the viscosity of the ink. The mechanical properties of the pattern have been improved. The printing method of 3 D printing can significantly reduce the sintering time and temperature of the conductive ink. These findings may provide innovation for the flexible electronics industry and pave the way for alternatives to cost-effective solutions. Originality/value In this study, direct ink writing technology was used to print circuit patterns on paper substrates. This process is simple and convenient and can control the thickness of the ink layer. The ink material is nonpolluting to the environment. Nano-silver ink has suitable viscosity and pH value. It can meet the requirements of pneumatic 3 D printers. The method has the characteristics of simple process, fast forming, low cost and high environmental friendliness.

Using structural equation modelling to assess the sustainable competitive advantages provided by the low-cost carrier model

2018 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Vedant Singh ◽  
S. Vaibhav ◽  
Somesh Kr. Sharma
Keyword(s):  
Structural Equation Modelling ◽  
Structural Equation ◽  
Structural Equation Models ◽  
Low Cost ◽  
Future Research ◽  
Competitive Advantages ◽  
Content Type ◽  
Equation Modelling ◽  
Five Factors ◽  
Sustainable Competitive Advantages

PurposeThe purpose of this study is to examine the relationships between the dimensions of sustainable competitive advantages in the Indian low cost airlines.Design/methodology/approachThis study used structural equation modelling methods to identify the factors that significantly affect the sustainable competitive advantages enjoyed by Indian low-cost carriers (LCCs). Specifically, this study is based on the data from 208 airline experts that populate multiple structural equation models.FindingsResults indicate that indigenous efficiency, the LCCs perceptions of threat, dexterity, strategic persuasion and the LCC adopting an enabling role positively affect LCCs’ competitive advantages. These five factors were all correlated with each other. The results also show that relative to an LCC’s dexterity, indigenous efficiency is a stronger predictor of an LCC’s competitive advantages.Originality/valueThis study provides low-cost airlines with valuable information for designing effective strategies for obtaining competitive advantages in the LCC sector. To conclude the paper, the authors offer practical recommendations for managers and suggest some avenues for future research in this area.

“Tata i-Shakti” to “Tata Sampann”: rebranding or repositioning?

2017 ◽  
Vol 7 (4) ◽  
pp. 1-16
Author(s):  
Geetika Varshneya ◽  
Gopal Das
Keyword(s):  
Brand Equity ◽  
Low Cost ◽  
Subject Area ◽  
Consumer Products ◽  
Brand Name ◽  
Content Type ◽  
Customer Base ◽  
Rural Market ◽  
Umbrella Branding ◽  
Executive Level

Subject area Marketing. Study level/applicability This case may be used by instructors to teach undergraduate, post graduate and executive level programmes in management. It may be used in basic marketing, branding or marketing strategy courses. The case may serve as a platform for the instructor to discuss the concepts and issues related to positioning and repositioning. Case overview Tata Chemicals, a subsidiary of the Tata group, launched the “i-Shakti” brand six years ago for its low-cost “solar-evaporated” salt for rural customers. In 2010, the company extended the brand equity of i-Shakti to a premium segment and launched a new brand “Tata i-Shakti” with a range of unpolished pulses. Changing the brand name and customer base from “i-Shakti for rural market” to “Tata i-Shakti for premium market” created a dilemma among customers in the market. To overcome this problem, in October 2015, the company’s portfolio of pulses, gram flour and food grade soda under “Tata i-Shakti” label has migrated into a new brand “Tata Sampann”. The company also launched a range of spices under the brand name of “Tata Sampann”. This new brand “Tata Sampann” was launched to serve the premium segment with an aim to “enrich everyday meals with extra nutrition and extra joy”. Also, this brand recreation was made by the company with anticipation to make avenues for future launches in the staples and food segment under Tata’s consumer products business. It has been almost a year since Tata Sampann was launched in the market. Given the tough competition and expected growth of the spices market in India, it remained to be seen whether “Tata i-Shakti” was rightly rebranded or repositioned with “Tata Sampann”. Expected learning outcomes To make participants understand the basic concepts of branding such as umbrella branding, brand repositioning and rebranding. To make participants learn about various brand elements and how they contribute in communicating the value proposition of the brand. To make participants appreciate various marketing and brand related strategies. Supplementary materials Teaching Notes are available for educators only. Please contact your library to gain login details or email [email protected] to request teaching notes. Subject code CSS: 8: Marketing.

scholarly journals Measurements of workplace productivity in the office context

2018 ◽  
Vol 20 (4) ◽  
pp. 281-301 ◽  
Author(s):  
Brandon Bortoluzzi ◽  
Daniel Carey ◽  
J.J. McArthur ◽  
Carol Menassa
Keyword(s):  
Knowledge Worker ◽  
Expert Interviews ◽  
Structured Interviews ◽  
Productivity Measurement ◽  
Worker Productivity ◽  
Content Type ◽  
The Past ◽  
Workplace Productivity ◽  
Detailed Evaluation ◽  
Comprehensive Survey

Purpose The purpose of this paper is to present a comprehensive survey of workplace productivity key performance indicators (KPIs) used in the office context. Academic literature from the past 10 years has been systematically reviewed and contextualized through a series of expert interviews. Design/methodology/approach The authors present a systematic review of the literature to identify KPIs and methods of workplace productivity measurement, complemented by insights semi-structured interviews to inform a framework for a benchmarking tool. In total, 513 papers published since 2007 were considered, of which 98 full-length papers were reviewed, and 20 were found to provide significant insight and are summarized herein. Findings Currently, no consensus exists on a single KPI suitable for measuring workplace productivity in an office environment, although qualitative questionnaires are more widely adopted than quantitative tools. The diversity of KPIs used in published studies indicates that a multidimensional approach would be the most appropriate for knowledge-worker productivity measurement. Expert interviews further highlighted a shift from infrequent, detailed evaluation to frequent, simplified reporting across human resource functions and this context is important for future tool development. Originality/value This paper provides a summary of significant work on workplace productivity measurement and KPI development over the past 10 years. This follows up on the comprehensive review by B. Haynes (2007a), providing an updated perspective on research in this field with additional insights from expert interviews.

Sign in / Sign up

Export Citation Format

Share Document