On maximum achievable speeds for field solvers

2014 ◽  
Vol 24 (7) ◽  
pp. 1537-1544 ◽  
Author(s):  
Rainald Löhner ◽  
Joseph D. Baum
Keyword(s):  
Large Scale ◽  
Content Type ◽  
Flow Solver ◽  
Large Scale Problems ◽  
Expected Performance ◽  
Depth Analysis ◽  
Flow Speeds ◽  
Time Required ◽  
First Time ◽  
Practical Implications

Purpose – Prompted by the empirical evidence that achievable flow solver speeds for large problems are limited by what appears to be a time of the order of O(0.1) sec/timestep regardless of the number of cores used, the purpose of this paper is to identify why this phenomenon occurs. Design/methodology/approach – A series of timing studies, as well as in-depth analysis of memory and inter-processors transfer requirements were carried out for a typical field solver. The results were analyzed and compared to the expected performance. Findings – The analysis shows that at present flow speeds per core are already limited by the achievable transfer rate to RAM. For smaller domains/larger number of processors, the limiting speed of CFD solvers is given by the MPI communication network. Research limitations/implications – This implies that at present, there is a “limiting useful size” for domains, and that there is a lower limit for the time it takes to update a flowfield. Practical implications – For practical calculations this implies that the time required for running large-scale problems will not decrease markedly once these applications migrate to machines with hundreds of thousands of cores. Originality/value – This is the first time such a finding has been reported in this context.

Time to raise the bar on nonprofit strategic planning and implementation

2014 ◽  
Vol 42 (3) ◽  
pp. 31-39 ◽  
Author(s):  
Margaret F. Reid ◽  
Lynne Brown ◽  
Denise McNerney ◽  
Dominic J. Perri
Keyword(s):  
Strategic Planning ◽  
Strategic Management ◽  
Large Scale ◽  
Management Practices ◽  
Content Type ◽  
Large Scale Survey ◽  
Broad Cross Section ◽  
First Time ◽  
Plan Management ◽  
Practical Implications

Purpose – This large-scale survey, initiated in 2012 and concluded in 2013, marked the first time a broad cross-section of the nonprofit community was asked to describe the strategic planning and strategic management practices they employ and to rate them for their impact on overall organizational success. Design/methodology/approach – Respondents were asked to self-rate their organization for overall success and the likelihood for continued success in the foreseeable future. Results from this data were then used as a filter to analyze practices across all responses by level of success (N = 507). Findings – Fully 93 percent of the most successful organizations, regardless of size or budget, credited their strategic planning and strategic-management efforts as having “some” to “critical” impact on their organization’s overall success. Practical implications – The evidence in this survey is so compelling that we believe the successful practices it identifies should be adopted by nonprofits of all sizes, demanded by boards, and supported by funders. Originality/value – This research indicates that funders should consider not only supporting strategic plan development, but also supporting development of ongoing plan management/implementation practices and requiring plan assessment reports/updates as part of the grantee’s reporting

3D sand mould printing: a review and a new approach

2018 ◽  
Vol 24 (2) ◽  
pp. 285-300 ◽  
Author(s):  
Donghua Zhao ◽  
Weizhong Guo ◽  
Baibing Zhang ◽  
Feng Gao
Keyword(s):  
Large Scale ◽  
Manufacturing Industry ◽  
Dimensional Accuracy ◽  
Time Analysis ◽  
New Approach ◽  
Content Type ◽  
On Line ◽  
Sand Mould ◽  
First Time ◽  
Practical Implications

Purpose The purpose of this paper is to review available technologies, analyse their features, propose a new approach of 3D sand mould printing based on line forming, introduce the manufacturing principle and show advantages of this approach, especially for larger parts with large Z steps in the build, such as 2 mm stepwise. Design/methodology/approach This paper introduces 3D sand mould printing, compares and analyses technological process and existing fabrication approaches among available technologies first. Then, a new approach of 3D sand mould printing is proposed to improve build speed. In addition, the proposed system will be analysed or benchmarked against existing systems. Findings A new approach based on line forming of sand mould printing is put forward by reviewing and analysing available technologies, to improve build speed from the aspect of basic moulding movement instead of optimization of moulding methods and process parameters. The theoretical calculation and analysis shows that build speed can be improved greatly, and it is more suitable for the manufacture of large-scale casting’s sand mould when considering dimensional accuracy and printing error, as well as uniformity of each layer. Research limitations/implications The specific implement scheme of line forming and nozzle’s specific structure of this new approach need further study. Practical implications Much higher build speed of 3D sand mould printing with new approach brings evident implication for moulds companies and manufacturing industry, having a far-reaching influence on the development of national economy. Originality/value This paper reviews available technologies and presents a new approach of 3D sand mould printing for the first time. Analysis of the new approach shows that this new method of sand mould printing can boost build speed greatly. So, its application prospect is great.

The required specifications of a fourth-generation university to shape innovation district under anchor approach: a meta-synthesis analysis using text mining

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Amir Asgari ◽  
Ali Khorsandi Taskoh ◽  
Saeed Ghiasi Nodooshan
Keyword(s):  
Text Mining ◽  
Design Methodology ◽  
Large Scale ◽  
Academic Development ◽  
Fourth Generation ◽  
Mining Method ◽  
Content Type ◽  
Shaping Process ◽  
First Time ◽  
Practical Implications

Purpose This paper aims to introduce a conceptual model for the shaping of the innovation district under the anchor approach by extracting the specifications of the fourth-generation university. Design/methodology/approach This study selected 550 resources and reduced them to 190 to achieve the most appropriate resources. This study used a meta-synthesis analysis approach using a text-mining method due to the multidisciplinary and voluminous nature of contents. Findings The results first reveal the shaping process and the components of innovation districts, which are: innovational urban infrastructures, knowledge economy and competitiveness and academic development. Second, this study also shows the specifications of a fourth-generation university to shape innovation districts. Practical implications This study also informs the policymakers and researchers internationally about the implementation requirements of a fourth-generation university and the shaping mechanisms of an innovation district. Originality/value This paper is pioneer about two concepts, first, it shows the shaping process of an innovation district, providing a large-scale insight about the components and second, this illustrates for the first time the specifications of a fourth-generation University practically as an anchor institute to shape innovation district.

A “Learning from Action” workshop in Japan

2019 ◽  
Vol 40 (2) ◽  
pp. 77-83
Author(s):  
Robert Douglas Hinshelwood ◽  
Luca Mingarelli ◽  
Simona Masnata
Keyword(s):  
Far East ◽  
Opportunity To Learn ◽  
Content Type ◽  
Work Activities ◽  
Defensive Role ◽  
Feedback Data ◽  
Experiential Workshop ◽  
First Time ◽  
Practical Implications

Purpose Many people in severe mentally disturbed states do not use language or other symbolic media well or coherently. Therefore, the non-verbal medium needs to be understood by workers with such people. The “Learning from Action” experiential workshop was developed in order to provide an opportunity to learn about hidden messages in the relationships and roles occurring in activities. In August 2017, a workshop was run for the first time in Japan. The purpose of this paper is to report the experience and dynamics observed by the three consultants, who are here the authors of this paper. Design/methodology/approach After the workshop all the staff and members, including interpreters, were invited to give feedback. Findings Analysis of the feedback data showed certain important dynamics, concerning especially dependence, cultural defences and the defensive role of activity in a multicultural context. Research limitations/implications This is an initial experience to be followed up by later feedback and further workshops. Practical implications Workers awareness of non-verbal communication within the roles of work activities is a training possibility. It faces various resistances including the mental health assumptions of meaninglessness of any communication outside the verbal. Originality/value This is a method of training not widely used even in European countries, and is the first in a country in the far east.

FATCA violation underlies latest US tax and securities fraud charges

2015 ◽  
Vol 16 (1) ◽  
pp. 74-76
Author(s):  
Miriam Fisher ◽  
Brian McManus
Keyword(s):  
Law Enforcement ◽  
Service Providers ◽  
Task Force ◽  
Tax Compliance ◽  
Financial Fraud ◽  
Securities Fraud ◽  
Content Type ◽  
The Impact ◽  
First Time ◽  
Practical Implications

Purpose – To explain the details and implications of a September 9, 2014 federal indictment, US v. Robert Bandfield, the first time a Foreign Account Tax Compliance Act (FATCA) violation has been charged as an “overt act” in furtherance of a tax conspiracy and securities fraud. Design/methodology/approach – Provides background, including the enactment of FATCA and the details of the indictment; describes an undercover investigation conducted by President Obama’s Financial Fraud Enforcement Task Force; and discusses the warnings this indictment sends to the global financial community. Findings – The indictment confirms the coordinated and aggressive tactics US law enforcement is now employing to investigate and prosecute offshore financial fraud. Practical implications – Banks and financial service providers need to be aware of the impact of enhanced US regulatory obligations and implement appropriate compliance measures. These institutions must also remain sensitive to risks presented by unscrupulous customers. Finally, they must be ready to manage appropriately information-gathering and investigatory inquiries originating with US authorities. Originality/value – Practical guidance from experienced tax controversy lawyers.

How “The Three Rules” guide strategy and investment decisions at Deloitte Consulting LLP

2015 ◽  
Vol 43 (3) ◽  
pp. 7-14 ◽  
Author(s):  
Jim Moffatt
Keyword(s):  
Design Methodology ◽  
Large Scale ◽  
Investment Decisions ◽  
Decision Makers ◽  
Research Project ◽  
Content Type ◽  
First Case ◽  
Practical Implications ◽  
Thought Leadership

Purpose – This case example looks at how Deloitte Consulting applies the Three Rules synthesized by Michael Raynor and Mumtaz Ahmed based on their large-scale research project that identified patterns in the way exceptional companies think. Design/methodology/approach – The Three Rules concept is a key piece of Deloitte Consulting’s thought leadership program. So how are the three rules helping the organization perform? Now that research has shown how exceptional companies think, CEO Jim Moffatt could address the question, “Does Deloitte think like an exceptional company?” Findings – Deloitte has had success with an approach that promotes a bias towards non-price value over price and revenue over costs. Practical implications – It’s critical that all decision makers in an organization understand how decisions that are consistent with the three rules have contributed to past success as well as how they can apply the rules to difficult challenges they face today. Originality/value – This is the first case study written from a CEO’s perspective that looks at how the Three Rules approach of Michael Raynor and Mumtaz Ahmed can foster a firm’s growth and exceptional performance.

“Never the first time on a patient”: the stakes of high-fidelity simulation for safety training

2018 ◽  
Vol 32 (5) ◽  
pp. 23-25 ◽  
Author(s):  
Lucie Cuvelier
Keyword(s):  
Case Studies ◽  
Design Methodology ◽  
Reading Time ◽  
Safety Training ◽  
High Fidelity ◽  
High Fidelity Simulation ◽  
Content Type ◽  
Pertinent Information ◽  
First Time ◽  
Practical Implications

Purpose This paper aims to review the latest management developments across the globe and pinpoint practical implications from cutting-edge research and case studies. Design/methodology/approach This briefing is prepared by an independent writer who adds their own impartial comments and places the articles in context. Findings An operative approach is described that is designed to structure the debriefing along three axes. Practical implications The paper provides strategic insights and practical thinking that have influenced some of the world’s leading organizations. Originality/value The briefing saves busy executives and researchers hours of reading time by selecting only the very best, most pertinent information and presenting it in a condensed and easy-to-digest format.

scholarly journals Time required to move cash through slot machines

2018 ◽  
Vol 21 (3) ◽  
pp. 376-384 ◽  
Author(s):  
Karen Kelly ◽  
Carl James Schwarz ◽  
Ricardo Gomez ◽  
Kim Marsh
Keyword(s):  
British Columbia ◽  
Slot Machines ◽  
Content Type ◽  
The Public ◽  
Average Value ◽  
The Mean ◽  
Time Required ◽  
Rest Breaks ◽  
Mean Time ◽  
Practical Implications

Purpose The purpose of this paper is to present an empirical study on the time needed to load and disburse cash using bill validators on slot machines and stand-alone cash dispensers in casinos in British Columbia under a Ticket In Ticket Out (TITO) system. Design/methodology/approach Testing took place over two days, using 18 machines. The results were extrapolated to estimate the approximate time required to process $1,000,000 with different average bill amounts in the cash mix and three different bill validator machines in common use. The average value per bill using the cash mix used by the public in the casino was $33.11 [standard error (SE) $2.11]. Findings The mean time/accepted note ranged from 4.12 to 9.65 s, depending on bill validator type. This implies that the time needed to load $1,000,000 onto credit slips using bill validators on slot machines ranges from 35 to 81 h, excluding rest breaks and other breaks. The time needed to redeem $1,000,000 is estimated to be 3 h. Practical/implications The implications of these finding for illicit actors to successfully launder large amounts of cash are discussed. Given the time needed to physically handle the cash, and other control systems currently in use in casinos in British Columbia, processing large amounts of cash using bill validators on slot machines would require a highly organized team that would find it difficult to elude detection. Originality/value The trial results provide a baseline estimate to be used going forward when investigating or proposing money laundering methodologies that include slot machines.

Cooperatives: an alternative to water privatization in Greece

2014 ◽  
Vol 10 (2) ◽  
pp. 135-154 ◽  
Author(s):  
Ifigeneia Douvitsa ◽  
Demosthenis Kassavetis
Keyword(s):  
Design Methodology ◽  
Water Distribution ◽  
Water Privatization ◽  
Negative Effects ◽  
Content Type ◽  
Negative Results ◽  
Viable Solution ◽  
Water Provision ◽  
First Time ◽  
Practical Implications

Purpose – The aim of this article is to investigate the organization of water cooperatives in Greece for the first time, as promoted by a spontaneous social mobilization called Initiative 136. The above attempt appears as an alternative proposition as opposed to the state-driven full privatization of EYATH S.A. Design/methodology/approach – This article presents previous work on water cooperatives and the negative effects of water privatization worldwide, relating it to water privatization in Greek reality through the prism of the current recession. Findings – While full privatization under the pressure of the economic crisis is very likely to yield significantly negative results, a transformation into a water cooperative might provide a viable solution. Research limitations/implications – Water cooperatives provide a solution for water distribution that is friendly for the consumer, the society and the environment. Practical implications – Application of a cooperative method of water provision in Greece could be a springboard for the use of the model in other areas. Originality/value – The article evaluates the privatization and cooperativization attempt of EYATH S.A. based on previous related research and considering Greece ' s current conditions.

Large-cap vs small-cap portfolio performance: new empirical evidence from ETFs

2019 ◽  
Vol 18 (1) ◽  
pp. 71-94
Author(s):  
Gerasimos Rompotis
Keyword(s):  
Design Methodology ◽  
Portfolio Performance ◽  
Exchange Traded Funds ◽  
Investment Strategies ◽  
Time Data ◽  
Content Type ◽  
Risk Characteristics ◽  
The Usa ◽  
First Time ◽  
Practical Implications

PurposeA well-documented pattern in the literature concerns the outperformance of small-cap stocks relative to their larger-cap counterparts. This paper aims to address the “small-cap versus large-cap” issue using for the first time data from the exchange traded funds (ETFs) industry.Design/methodology/approachSeveral raw return and risk-adjusted return metrics are estimated over the period 2012-2016.FindingsResults are partially supportive of the “size effect”. In particular, small-cap ETFs outperform large-cap ETFs in overall raw return terms even though they fail the risk test. However, outperformance is not consistent on an annual basis. When risk-adjusted returns are taken into consideration, small-cap ETFs are inferior to their large-cap counterparts.Research limitations/implicationsThis research only covers the ETF market in the USA. However, given the tremendous growth of ETF markets worldwide, a similar examination of the “small vs large capitalization” issue could be conducted with data from other developed ETF markets in Europe and Asia. In such a case, useful comparisons could be made, so that we could conclude whether the findings of the current study are unique and US-specific or whether they could be generalized across the several international ETF markets.Practical implicationsA possible generalization of the findings would entail that profitable investment strategies could be based on the different performance and risk characteristics of small- and large-cap ETFs.Originality/valueThis is the first study to examine the performance of ETFs investing in large-cap stock indicesvis-à-visthe performance of ETFs tracking indices comprised of small-cap stocks.

Sign in / Sign up

Export Citation Format

Share Document