Silica precursor as synergist for cotton flame retardancy

2016 ◽  
Vol 28 (3) ◽  
pp. 378-386 ◽  
Author(s):  
Ana Marija Grancaric ◽  
Lea Botteri ◽  
Jenny Alongi ◽  
Anita Tarbuk
Keyword(s):  
Thermal Properties ◽  
Synergistic Effect ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Flame Retardants ◽  
Ammonium Polyphosphate ◽  
Limiting Oxygen Index ◽  
Excellent Thermal Stability ◽  
Content Type ◽  
Silica Precursor

Purpose – The cotton and its blends is the most commonly used textile material in the design and production of protective clothing. However, as the cellulose textiles are the most flammable materials it is necessary to improve its flame retardancy. The government regulations have been the driving force for developing durable flame retardants finishes for textile, to improve its performance and to reduce the negative impact on the environment. The paper aims to discuss these issues. Design/methodology/approach – This paper investigates the effect of silica precursor (tetraethoxysilane – TEOS) added in bath with conventional flame retardant urea/ammonium polyphosphate in full and half concentration for achieving environmental-friendly cotton flame retardancy. Silica precursors have excellent thermal stability and high heat resistance with very limited release of toxic gases during the thermal decomposition. Synergistic effect between urea/ammonium polyphosphate and TEOS has been calculated. Thermal properties of treated cotton fabrics were determined by limiting oxygen index (LOI), thermogravimetric analysis (TGA) and microscale combustion calorimeter (MCC). Findings – TEOS, significantly improves the flame retardancy of cotton when added in the bath with conventional flame retardants urea/ammonium polyphosphate by increasing the LOI values and other thermal properties as increasing char residue measured by TGA and higher heat release rate measured by MCC. Originality/value – This paper represent a good synergistic effect between urea/ammonium polyphosphate and TEOS. This phenomena is evident in better thermal properties when TEOS was added in the bath with conventional flame retardant especially for half concentration of urea/ammonium polyphosphate.

The Flammability of Polyacrylonitrile and Its Copolymers I. The Flammability Assessment Using Pressed Powdered Polymer Samples

1993 ◽  
Vol 11 (5) ◽  
pp. 442-456 ◽  
Author(s):  
Jun Zhang ◽  
Michael E. Hall ◽  
A. Richard Horrocks
Keyword(s):  
Flame Retardant ◽  
Flame Retardancy ◽  
Flame Retardants ◽  
Oxygen Index ◽  
Char Residue ◽  
Acrylic Polymer ◽  
Limiting Oxygen Index ◽  
Convenient Means ◽  
Burning Rates ◽  
Polymer Flammability

This paper is the first in a series of four which investigates the burning behaviour and the influence of flame retardant species on the flam mability of fibre-forming polymer and copolymers of acrylonitrile. A pressed powdered polymer sheet technique is described that enables a range of polymer compositions in the presence and absence of flame retardants to be assessed for limiting oxygen index, burning rate and char residue deter minations. The method offers a rapid, reproducible and convenient means of screening possible flame retardant systems, and LOI values compare favourably with those of films and fabrics comprising the same polymeric type. Burning rates, however, are sensitive to changes in physical sample character such as form (film vs. powder sheet) and density. Thus the technique forms an excellent basis for the generation of burning data which will enable comprehensive studies of acrylic polymer flammability and flame retardancy to be undertaken.

scholarly journals Layer-by-layer assembly flame-retardant and anti-dripping treatment of polyethylene terephthalate fabrics

2019 ◽  
Vol 14 ◽  
pp. 155892501987030
Author(s):  
Yinchun Fang ◽  
Xinhua Liu ◽  
Cuie Wang
Keyword(s):  
Flame Retardant ◽  
Polyethylene Terephthalate ◽  
Flame Retardancy ◽  
Alkali Treatment ◽  
Ammonium Polyphosphate ◽  
Layer By Layer ◽  
Limiting Oxygen Index ◽  
Layer By Layer Assembly ◽  
Branched Polyethylenimine ◽  
Layer Assembly

Layer-by-layer assembly is a simple and effective method which has been widely studied to improve the flame retardancy of textiles in recent years. In this article, flame-retardant and anti-dripping polyethylene terephthalate fabrics were successfully prepared by layer-by-layer assembly branched polyethylenimine and ammonium polyphosphate on their surface. The results of limiting oxygen index values and vertical burning test revealed that the flame retardancy and anti-dripping performance of polyethylene terephthalate fabrics were improved after the layer-by-layer assembly treatment; especially, the dripping phenomenon was eliminated when the number of branched polyethylenimine/ammonium polyphosphate bilayers was over 10. The influence of alkali treatment of polyethylene terephthalate fabrics before layer-by-layer assembly was also investigated. The results showed that alkali treatment of the polyethylene terephthalate fabrics would promote the combination of polyethylene terephthalate fabrics and the charged flame retardants indicating better flame retardancy. The results of thermogravimetric analysis revealed that layer-by-layer assembly treatment of polyethylene terephthalate fabrics would promote char formation both under the nitrogen atmosphere and under the air atmosphere which may act through condensed phase action. The scanning electron microscopy images of the char residues revealed that the layer-by-layer assembly treatment of polyethylene terephthalate fabrics would promote the formation of a compact and intact char residue, which was beneficial for the improvement of flame retardancy and anti-dripping performance. This research would provide the experimental basis for the effective flame retardancy and anti-dripping performance of polyethylene terephthalate fabric.

Study on the Synthesis and Characterization of a Novel Phosphorus-Nitrogen Containing Intumescent Flame Retardant

2011 ◽  
Vol 399-401 ◽  
pp. 1376-1380
Author(s):  
Li Hua You ◽  
Yin Yin Hui ◽  
Xiang Ning Shi ◽  
Zhi Han Peng
Keyword(s):  
Molecular Structure ◽  
Thermal Properties ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Oxygen Index ◽  
Phosphinic Acid ◽  
Intumescent Flame Retardant ◽  
Synthesis And Characterization ◽  
Limiting Oxygen Index

In this study, a novel phosphorus-nitrogen containing intumescent flame retardant (P-N IFR) poly(melamine 2-carboxyethyl(phenyl) phosphate)(PMCEP) was prepared via the reaction of 2-carboxyethyl (phenyl) phosphinic acid (CEPPA) and melamine (MEL) in two-steps. Meanwhile, the molecular structure of the chemical compound was determined by FTIR,1H-NMR and elemental analysis; and the thermal properties was investigated by means of TGA. Combustion studies revealed high limiting oxygen index (LOI) indicative of better flame-retardancy properties for PBT resin.

Nacre-mimetic CH/MMT fabrication coating on PET fabric for improving anti-dripping performance

2020 ◽  
Vol 32 (6) ◽  
pp. 803-812
Author(s):  
Yinchun Fang ◽  
Xinhua Liu ◽  
Wenqing Fei
Keyword(s):  
Flame Retardant ◽  
Flame Retardancy ◽  
Thermo Gravimetric Analysis ◽  
Original Research ◽  
Gravimetric Analysis ◽  
Experimental Basis ◽  
Limiting Oxygen Index ◽  
Content Type ◽  
Pet Fabric ◽  
Assembly Method

PurposePET fiber is widely used in many fields, such as clothing and decorative materials. However, the high flammability and dripping problem restrict its applications. It is vital for PET fiber to overcome these two main drawbacks for practical applications.Design/methodology/approachIn this paper nacre-mimetic flame retardant coating of chitosan (CH) and Montmorillonite (MMT) was fabricated on PET fabrics through the layer-by-layer assembly method. The flame retardancy and anti-dripping performance of the treated PET fabric were investigated.FindingsThe results of limiting oxygen index (LOI) value and vertical burning test revealed the anti-dripping performance of PET fabrics which was greatly improved, while the flame retardancy has not been improved. The dripping phenomena was eliminated when the CH/MMT bilayers were over 5 BL. Thermo gravimetric analysis (TGA) results revealed that nacre-mimetic coated CH/MMT bilayers on PET fabrics would promote the char formation both under nitrogen atmosphere and under air atmosphere indicating the obviously condensed phase flame retardant action. scanning electron microscopy (SEM) images of the char residues revealed that coated PET fabrics would promote the formation of char.Research limitations/implicationsHowever, the char was an unstable char which would further combust to change the thermal degradation and combustion process of PET fabric. Though PET fabric coated by this CH/MMT nacre-mimetic system had no flame retardancy, the anti-dripping performance was greatly improved. This research would provide experimental basis for improving the anti-dripping performance for thermoplastic materials.Originality/valueThis research is the original research for the flame retardant treatment by fabrication nacre-mimetic CH/MMT coating on PET fabric, which has not been reported previously. This research would provide experimental basis for improving the anti-dripping performance for thermoplastic polymer fabrics.

scholarly journals Flame Retardant Polypropylenes: A Review

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1701 ◽  
Author(s):  
Farzad Seidi ◽  
Elnaz Movahedifar ◽  
Ghasem Naderi ◽  
Vahideh Akbari ◽  
Franck Ducos ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Flame Retardancy ◽  
Flame Retardants ◽  
Cone Calorimetry ◽  
Research Papers ◽  
Limiting Oxygen Index ◽  
Wide Range ◽  
Pp Composites ◽  
Calorimetry Data

Polypropylene (PP) is a commodity plastic known for high rigidity and crystallinity, which is suitable for a wide range of applications. However, high flammability of PP has always been noticed by users as a constraint; therefore, a variety of additives has been examined to make PP flame-retardant. In this work, research papers on the flame retardancy of PP have been comprehensively reviewed, classified in terms of flame retardancy, and evaluated based on the universal dimensionless criterion of Flame Retardancy Index (FRI). The classification of additives of well-known families, i.e., phosphorus-based, nitrogen-based, mineral, carbon-based, bio-based, and hybrid flame retardants composed of two or more additives, was reflected in FRI mirror calculated from cone calorimetry data, whatever heat flux and sample thickness in a given series of samples. PP composites were categorized in terms of flame retardancy performance as Poor, Good, or Excellent cases. It also attempted to correlate other criteria like UL-94 and limiting oxygen index (LOI) with FRI values, giving a broad view of flame retardancy performance of PP composites. The collected data and the conclusions presented in this survey should help researchers working in the field to select the best additives among possibilities for making the PP sufficiently flame-retardant for advanced applications.

scholarly journals Synergistic Effects of Two-Dimensional MXene and Ammonium Polyphosphate on Enhancing the Fire Safety of Polyvinyl Alcohol Composite Aerogels

Polymers ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 1964 ◽  
Author(s):  
Xinxin Sheng ◽  
Sihao Li ◽  
Yanfeng Zhao ◽  
Dongsheng Zhai ◽  
Li Zhang ◽  
...  
Keyword(s):  
Transition Metal ◽  
Polyvinyl Alcohol ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Fire Hazard ◽  
Ammonium Polyphosphate ◽  
Transition Metal Carbide ◽  
Metal Carbide ◽  
Limiting Oxygen Index ◽  
Composite Aerogels

Fire and smoke suppressions of polyvinyl alcohol (PVA) aerogels are urgently required due to the serious fire hazard they present. MXene, a 2D transition-metal carbide with many excellent properties, is considered a promising synergist for providing excellent flame retardant performance. PVA/ammonium polyphosphate (APP)/transition metal carbide (MXene) composite aerogels were prepared via the freeze-drying method to enhance the flame retardancy. Thermogravimetric analysis, limiting oxygen index, vertical burning, and cone calorimeter tests were executed to investigate the thermal stability and flame retardancy of PVA/APP/MXene (PAM) composite aerogels. The results demonstrated that MXene boosted the flame retardancy of PVA-APP, and that PAM-2 (with 2.0 wt% MXene loading) passed the V-0 rating, and reached a maximum LOI value of 42%; Moreover, MXene endowed the PVA-APP system with excellent fire and smoke suppression performance, as the the peak heat release rate and peak smoke production rate were significantly reduced by 55% and 74% at 1.0 wt% MXene loading. The flame retardant mechanism was systematically studied, MXene facilitated the generation of compact intumescent residues via ita catalyst effects, thus further restraining the release of heat and smoke. This work provides a simple route to improve the flame retardancy of PVA aerogels via the synergistic effect of MXene and APP.

Sign in / Sign up

Export Citation Format

Share Document