Adhesive properties of S.S to PU and PVC leathers

2014 ◽  
Vol 26 (2) ◽  
pp. 108-117 ◽  
Author(s):  
Shouxiang Jiang ◽  
Dagang Miao ◽  
Diandong Zhao
Keyword(s):  
Electron Microscopy ◽  
Weight Loss ◽  
Bonding Strength ◽  
Design Methodology ◽  
Adhesive Properties ◽  
Content Type ◽  
Force Microscopy ◽  
Atomic Force ◽  
Scanning Electron ◽  
Better Than

Purpose – The purpose of this paper is to investigate the interfacial nanostructures and the adhesions of the stainless steel (S.S) coating to the polyurethane (PU) and polyvinyl chloride (PVC) leathers. Design/methodology/approach – PU leather and PVC leather deposit S.S nano-films on the surface of PU and PVC leathers in this study. The interfacial nanostructures were investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The experimental results revealed that the surface roughness of the substrates had extremely important influence on the morphology of nano-films. The adhesions of the S.S coating to the PU and PVC leathers were investigated by the peel-off test. Findings – The results showed that the adhesive performance of the S.S nano-films coating on PVC leather was better than that on the substrate of PU leather. Moreover, a weight loss of per peeling force calculating formulation is proposed to determine the bonding strength between the S.S films and the substrates. Originality/value – In this paper, influence of different substrates on surface morphology of S.S coating was studied by SEM and AFM. Moreover, the weight loss of per peeling force calculating formulation was used to discuss the bonding strength between the S.S coating and the substrates. The research methods presented in this paper are of innovation significance to a certain extent.

The role of drug as corrosion inhibitor for mild steel surface characterization by SEM, AFM, and FTIR

2016 ◽  
Vol 63 (4) ◽  
pp. 308-315 ◽  
Author(s):  
Md. Zaved Hossain Khan ◽  
Md. Abdul Aziz ◽  
Md. Rafiul Hasan ◽  
Md. Rashid Al-Mamun
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Mild Steel ◽  
Steel Surface ◽  
Content Type ◽  
Mild Steel Surface ◽  
Force Microscopy ◽  
Corrosion Rates ◽  
Atomic Force ◽  
Scanning Electron

Purpose The purpose of this study is to understand the inhibitor behavior of specific drug against mild steel corrosion and their adsorption mechanism on the surface. Design/methodology/approach Corrosion rates are influenced by the formation of inhibitor aggregates at the mild steel surface. Detail surface characterizations of mild steel have been studied before and after adsorption of drugs in 1N HCl solution. Scanning electron microscopy, atomic force microscopy and Fourier transform infrared spectroscopy were used to examine the effect of drug adsorption on steel surface. Findings Scanning electron microscopy analysis suggested that the metal had been protected from aggressive corrosion because of the addition of the inhibitors. Atomic force microscopy visualization confirmed the formation of protective layer on steel surface, resulting in the decrease in surface roughness with corrosion rates. The nature of metal surface has been analyzed by Fourier transform infrared spectroscopy. Originality/value The findings of this study will help us to understand the interaction of specific drugs with mild steel surface and their potential inhibition mechanism.

scholarly journals Red Arecanut Seed Extract as a Sustainable Corrosion Inhibitor for Aluminum Submerged in Acidic Corrodent: An Experimental Approach Towards Zero Environmental Impact

2017 ◽  
Vol 62 (3) ◽  
pp. 351-358 ◽  
Author(s):  
Narasimha Raghavendra ◽  
Jathi Ishwara Bhat
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Weight Loss ◽  
Atomic Force Microscopy ◽  
Impedance Spectroscopy ◽  
Seed Extract ◽  
Solution Temperature ◽  
Force Microscopy ◽  
Atomic Force ◽  
Scanning Electron

The effect of the red arecanut seed (RAS) extract on the corrosion of aluminum in 0.5 M hydrochloric acid environment is reported by weight loss, electrochemical (Tafel plot and impedance spectroscopy), scanning electron microscopy and atomic force microscopy studies. The weight loss study indicated that, protection efficiency of the red arecanut seed extract is directly proportional to its concentration and inversely proportional to solution temperature and aluminum contact time in the test solution. Langmuir adsorption isotherm is best fitted model explaining the adsorption of red arecanut seed extract constituents on aluminum surface in 0.5 M HCl system. The results obtained from Tafel curves indicated the mixed inhibition role of red arecanut seed extract. The impedance spectroscopy technique indicated that, red arecanut seed extract reduces the speed of aluminum corrosion by charge transfer process. The scanning electron microscopy and atomic force microscopy images of aluminum specimens clearly give clues about the adsorption of plant constituents on the surface of the aluminum metal.

Etching Treatment Effect on Surface Morphology of Dental Structures

2017 ◽  
Vol 68 (11) ◽  
pp. 2700-2703 ◽  
Author(s):  
Kamel Earar ◽  
Vasile Iulian Antoniac ◽  
Sorana Baciu ◽  
Simion Bran ◽  
Florin Onisor ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Surface Morphology ◽  
Phosphoric Acid ◽  
Human Teeth ◽  
Strong Bond ◽  
Force Microscopy ◽  
Atomic Force ◽  
Human Dentine ◽  
Dental Surface ◽  
Scanning Electron

This study examined and compared surface of human dentine after acidic etching with hydrogen peroxide, phosphoric acid liquid and gel. Surface demineralization of dentin is necessary for a strong bond of adhesive at dental surface. Split human teeth were used. After application of mentioned substances at dentin level measures of the contact angle and surface morphology were employed. Surface morphology was analyzed with the help of scanning electron microscopy and atomic force microscopy. Liquid phosphoric acid yielded highest demineralization showing better hydrophobicity than the rest, thus having more contact surface. Surface roughness are less evident and formed surface micropores of 4 �m remained open after wash and air dry providing better adhesive canalicular penetration and subsequent bond.

scholarly journals Corrosion Behavior and Mechanical Properties of a Nanocomposite Superhydrophobic Coating

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 652
Author(s):  
Divine Sebastian ◽  
Chun-Wei Yao ◽  
Lutfun Nipa ◽  
Ian Lian ◽  
Gary Twu
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Atomic Force Microscopy ◽  
Nanocomposite Coating ◽  
Superhydrophobic Coating ◽  
Force Microscopy ◽  
Atomic Force ◽  
Microscopy Images ◽  
Scanning Electron

In this work, a mechanically durable anticorrosion superhydrophobic coating is developed using a nanocomposite coating solution composed of silica nanoparticles and epoxy resin. The nanocomposite coating developed was tested for its superhydrophobic behavior using goniometry; surface morphology using scanning electron microscopy and atomic force microscopy; elemental composition using energy dispersive X-ray spectroscopy; corrosion resistance using atomic force microscopy; and potentiodynamic polarization measurements. The nanocomposite coating possesses hierarchical micro/nanostructures, according to the scanning electron microscopy images, and the presence of such structures was further confirmed by the atomic force microscopy images. The developed nanocomposite coating was found to be highly superhydrophobic as well as corrosion resistant, according to the results from static contact angle measurement and potentiodynamic polarization measurement, respectively. The abrasion resistance and mechanical durability of the nanocomposite coating were studied by abrasion tests, and the mechanical properties such as reduced modulus and Berkovich hardness were evaluated with the aid of nanoindentation tests.

Lateral Size of Self-Patterned Nanostructures Controlled by Multi-Step Deposition

2005 ◽  
Vol 106 ◽  
pp. 117-122 ◽  
Author(s):  
Izabela Szafraniak ◽  
Dietrich Hesse ◽  
Marin Alexe
Keyword(s):  
Electron Microscopy ◽  
Ultrathin Films ◽  
Lateral Size ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Non Volatile Memory ◽  
Ferroelectric Capacitors ◽  
Scanning Electron

Self-patterning presents an appealing alternative to lithography for the production of arrays of nanoscale ferroelectric capacitors for use in high density non-volatile memory devices. Recently a self-patterning method, based on the use of the instability of ultrathin films during hightemperature treatments, was used to fabricate nanosized ferroelectrics. This paper reports the use of the method for the preparation of PZT nanoislands on different single crystalline substrates - SrTiO3, MgO and LaAlO3. Moreover, a multi-step deposition procedure in order to control lateral the dimension of the crystals was introduced. The nanostructures obtained were studied by atomic force microscopy, scanning electron microscopy and X-ray diffraction.

Si+ Implantation and Activation in GaN Comparison of GaN on Sapphire and GaN on Silicon

2012 ◽  
Vol 711 ◽  
pp. 213-217 ◽  
Author(s):  
Anne Elisabeth Bazin ◽  
Frédéric Cayrel ◽  
Mohamed Lamhamdi ◽  
Arnaud Yvon ◽  
Jean Christophe Houdbert ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Ohmic Contacts ◽  
Silicon Oxide ◽  
Electrical Activation ◽  
Specific Contact Resistance ◽  
Force Microscopy ◽  
Atomic Force ◽  
Specific Contact ◽  
Good Behaviour ◽  
Scanning Electron

In this paper, we evaluated gallium nitride heteroepitaxially grown on sapphire (GaN/Sa) and grown on silicon (GaN/Si) faced to implantation doping. Si+ was implanted on low doped n-type epilayers in order to create a plateau around 1020at.cm-3. All the samples were capped with a silicon oxide and annealed between 1000°C and 1150°C. The surface quality was evaluated in terms of roughness, pit density and maximum pit diameter using Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM). Finally, the dopant electrical activation was studied with Ti-Al contacts using the circular Transfert Length Method (c-TLM). This study shows that low Specific Contact Resistance (SCR) values of 8x10-5Ω.cm2 and 6x10-6Ω.cm2 are respectively obtained on GaN/Sa sample annealed at 1150°C-2min and on GaN/Si sample annealed at 1150°C-30s, proving that good ohmic contacts are obtained on both materials. Nevertheless, a compromise has to be done between the low SCR values obtained and the GaN surface degradation, observed by AFM and SEM after the different annealing treatments and which could affect the good behaviour of the GaN devices.

ELECTROCHEMICAL INVESTIGATION OF 2-THIOHYDANTOIN DERIVATIVES AS CORROSION INHIBITORS FOR MILD STEEL IN ACIDIC MEDIUM

2021 ◽  
Author(s):  
Petar Stanić ◽  
◽  
Nataša Vukićević ◽  
Vesna Cvetković ◽  
Miroslav Pavlović ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mild Steel ◽  
Acidic Medium ◽  
Corrosion Inhibitors ◽  
Electrochemical Impedance ◽  
Electrochemical Investigation ◽  
Force Microscopy ◽  
Atomic Force ◽  
Hcl Solution ◽  
Scanning Electron

Four 2-thiohydantoin derivatives were synthesized and their corrosion inhibition properties on mild steel (MS) in 0.5M HCl solution was evaluated using usual gravimetric and electrochemical methods (weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS). Morphology of the metal surface was characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The study has shown that these compounds provide good protection for mild steel against corrosion in the acidic medium.

Comparative Study of Field Emission-Scanning Electron Microscopy and Atomic Force Microscopy to Assess Self-assembled Monolayer Coverage on Any Type of Substrate

1999 ◽  
Vol 5 (6) ◽  
pp. 413-419 ◽  
Author(s):  
Bernardo R.A. Neves ◽  
Michael E. Salmon ◽  
Phillip E. Russell ◽  
E. Barry Troughton
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Atomic Force Microscopy ◽  
Comparative Study ◽  
Field Emission ◽  
Self Assembled Monolayer ◽  
Force Microscopy ◽  
Atomic Force ◽  
Self Assembled ◽  
Scanning Electron

Abstract: In this work, we show how field emission–scanning electron microscopy (FE-SEM) can be a useful tool for the study of self-assembled monolayer systems. We have carried out a comparative study using FE-SEM and atomic force microscopy (AFM) to assess the morphology and coverage of self-assembled monolayers (SAM) on different substrates. The results show that FE-SEM images present the same qualitative information obtained by AFM images when the SAM is deposited on a smooth substrate (e.g., mica). Further experiments with rough substrates (e.g., Al grains on glass) show that FE-SEM is capable of unambiguously identifying SAMs on any type of substrate, whereas AFM has significant difficulties in identifying SAMs on rough surfaces.

Sign in / Sign up

Export Citation Format

Share Document