Piston ring-cylinder liner tribology investigation in mixed lubrication regime: part I-correlation with bench experiment

2015 ◽  
Vol 67 (6) ◽  
pp. 520-530 ◽  
Author(s):  
Lin Ba ◽  
Zhenpeng He ◽  
Lingyan Guo ◽  
Young Chiang ◽  
Guichang Zhang ◽  
...  
Keyword(s):  
Friction Coefficient ◽  
Sudden Change ◽  
Mixed Lubrication ◽  
Friction Reduction ◽  
Asperity Contact ◽  
Film Rupture ◽  
Frictional Loss ◽  
Content Type ◽  
Oil Film ◽  
Ring Sample

Purpose – The purpose of this paper is to improve the environment and save energy, friction reduction, lower oil consumption and emissions demand that are the chief objectives of the automotive industry. The piston system is the largest frictional loss source, which accounts for about 40 per cent of the total frictional loss in engine. In this paper, the reciprocating tribometer, which is updated, was used to evaluate the friction and wear performances. Design/methodology/approach – An alternate method is introduced to investigate the effect of reciprocating speed, normal load, oil pump speed and ring sample and oil temperature on friction coefficient with the ring/liner of a typical inline diesel engine. The orthogonal experiment is designed to identify the factors that dominate wear behavior. To understand the correlations between friction coefficients and wear well, different friction coefficient results were compared and explained by oil film build-up and asperity contact theory, such as the friction coefficient over a long period and averaged the friction coefficient over one revolution. Findings – The friction coefficient changes little but fluctuates with a small amplitude in the stable stage. The sudden change of frequency, load and stroke will lead to the oil film rupture. The identification for the factors that dominates the wear loss is ranged as F (ring sample) > , E (oil sample) > , B (stroke) > , D (temperature) > , A (load) > , G (liner) > and C (frequency). Originality/value – This paper develops and verifies a methodology capable of mimicking the real engine behavior at boundary and mixed lubrication regimes which can minimize frictional losses, wear, reduce much work for the experiment and reduce the cost. The originality of the work is well qualified, as very few papers on a similar analysis have been published, such as: The friction coefficient values fluctuating in the whole stage may be caused by the vibration of the system; suddenly, boundary alternation may help the oil film to form the lubrication; and weight loss mainly comes from the contribution of the friction coefficient value fluctuation. The paper also found that the statistics can gain more information from less experiment time based on a design of experiment.

An EHD-mixed lubrication analysis of main bearings for diesel engine based on coupling between flexible whole engine block and crankshaft

2015 ◽  
Vol 67 (2) ◽  
pp. 150-158 ◽  
Author(s):  
Lidui Wei ◽  
Haijun Wei ◽  
Shulin Duan ◽  
Yu Zhang
Keyword(s):  
Diesel Engine ◽  
Flow Model ◽  
Mixed Lubrication ◽  
Engine Block ◽  
Contact Theory ◽  
Asperity Contact ◽  
Block Model ◽  
Content Type ◽  
Oil Film ◽  
Average Flow Model

Purpose – The purpose of this paper is to develop a good calculation model to accurately predict the lubrication characteristic of main bearings of diesel engine and improve the service life. Design/methodology/approach – Based on the coupling of the whole flexible engine block and the flexible crankshaft reduced by the Component Mode Synthesis (CMS) method, considering mass-conserving boundary conditions, the average flow model equation and Greenwood/Tripp asperity contact theory, an elastohydrodynamic (EHD)-mixed lubrication model of the main bearings for the diesel engine is developed and researched with the finite volume method and the finite element method. Findings – Obviously, the mixed lubrication of bearings is normal, while full hydrodynamic lubrication is transient. The results show that under the whole flexible block model, maximum oil film pressure, maximum asperity contact pressure and radial shell deformation decrease, while minimum oil film thickness increases. Oil flow over edge decreases, and so does friction loss. Therefore, coordination deformation ability of whole engine block is favorable to mean load. In the whole block model, friction contact happens on both upper shell and lower shell positions. In addition, average oil film fill ratio at the key position becomes smaller in the whole engine block model, and consequently increases the chances of cavitations erosion more. So, wearing resistance of both upper and lower shells and anti-cavitations erosion ability must be enhanced simultaneously. Originality/value – Based on the coupling of the whole flexible engine block and the flexible crankshaft reduced by the CMS method, considering mass-conserving boundary conditions, the average flow model equation and Greenwood/Tripp asperity contact theory, an EHD-mixed lubrication model of the main bearings for the diesel engine is built, which can predict the lubrication of journal bearings more accurately.

Numerical and experimental study on the effect of surface texture with roughness orientation considered under a mixed lubrication state

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Junru Wang ◽  
Quandai Wang ◽  
Yueyan Li ◽  
Meiling Guo ◽  
Pengyang Li ◽  
...  
Keyword(s):  
Surface Texture ◽  
Surface Texturing ◽  
Mixed Lubrication ◽  
Laser Surface ◽  
Geometric Parameters ◽  
Laser Surface Texturing ◽  
Textured Surface ◽  
Asperity Contact ◽  
Content Type ◽  
Texture Parameters

Purpose The purpose of this paper is to investigate the effects of surface texture with roughness orientation considered on tribological properties under a mixed lubrication state numerically and experimentally. Design/methodology/approach Based on the average Reynolds equation and asperity contact model, the impacts of surface texture parameters and roughness orientation on lubrication properties have been calculated using finite difference method. Tin–bronze samples with various prescribed surface texture geometric parameters and roughness orientation were fabricated by laser surface texturing technique, and the tribology performance of the textured surface was studied experimentally. Findings The effects of surface geometric parameters and roughness orientation parameters have been discerned. The experimental observations are in good agreement with the numerical prediction, which suggests that the numerical scheme adopted in this work is suitable in capturing the surface texture and roughness effect under mixed lubrication state. Originality/value By meticulously controlling the surface roughness and surface texture geometric characteristics based on the laser surface texturing process, samples with prescribed surface texture parameters and roughness orientation consistent with that in theoretical studies were fabricated and the theoretical model and results were verified experimentally.

Size effect on thermal elastohydrodynamic lubrication of industrial chain bush-pin hinge pair

2019 ◽  
Vol 71 (9) ◽  
pp. 1080-1085 ◽  
Author(s):  
Mingyu Zhang ◽  
Jing Wang ◽  
Yi Liu ◽  
Longjie Dai ◽  
Zhaohua Shang
Keyword(s):  
Friction Coefficient ◽  
Film Thickness ◽  
Temperature Rise ◽  
Elastohydrodynamic Lubrication ◽  
Curvature Radius ◽  
Line Contact ◽  
Content Type ◽  
Oil Film ◽  
Industrial Chain ◽  
Infinite Line

Purpose The purpose of this paper is to use elastohydrodynamic lubrication (EHL) theory to study the variation of the equivalent curvature radius “R” on the change of oil film thickness, pressure, temperature rise and friction coefficient in the contact zone between bush-pin in industrial chain drive. Design/methodology/approach In this paper, the contact between bush and pin is simplified as infinitely long line contact. The lubrication state is studied by numerical simulation using steady-state line contact thermal EHL. The two constitutive equations, namely, Newton fluid and Ree–Eyring fluid are used in the calculations. Findings It is found that with the increase of equivalent curvature radius, the thickness of oil film decreases and the temperature rise increases. Under the same condition, the friction coefficient of Newton fluid is higher than that of Ree–Eyring fluid. When the load increases, the oil film thickness decreases, the temperature rise increases and the friction coefficient decreases; and the film thickness increases with the increase of the entraining speed under the condition “R < 1,000 mm”. Research limitations/implications The infinite line contact assumption is only an approximation. For example, the distances between the two inner plates are 5.72 mm, by considering the two parts assembled into the inner plates, the total length of the bush is less than 6 mm. The diameter of the pin and the bore diameter of the bush are 3.28 and 3.33 mm. However, the infinite line contact is also helpful in understanding the general variation of oil film characteristics and provides a reference for the future study of finite line contact of chain problems. Originality/value The change of the equivalent radius R on the variation of the oil film in the contact of the bush and the pin in industrial chain drive was investigated. The size effect influences the lubrication characteristic greatly in the bush-pin pair.

A numerical method to investigate the mixed lubrication performances of journal-thrust coupled bearings

2019 ◽  
Vol 71 (9) ◽  
pp. 1099-1107
Author(s):  
Guo Xiang Guo Xiang ◽  
Yanfeng Han ◽  
Renxiang Chen ◽  
Jiaxu Wang Jiaxu Wang ◽  
Ni Xiaokang
Keyword(s):  
Thrust Bearing ◽  
Load Capacity ◽  
Elastohydrodynamic Lubrication ◽  
Hydrodynamic Pressure ◽  
Mixed Lubrication ◽  
Hydrodynamic Effect ◽  
Asperity Contact ◽  
Content Type ◽  
Lubrication Regime ◽  
Coupled Effect

Purpose This paper aims to present a numerical model to investigate the mixed lubrication performances of journal-thrust coupled bearings (or coupled bearings). Design/methodology/approach The coupled hydrodynamic effect (or coupled effect) between the journal and the thrust bearing is considered by ensuring the continuity of the hydrodynamic pressure and the flow field at the common boundary. The mixed lubrication performances of the coupled bearing are comparatively studied for the cases of considering and not considering coupled effect. Findings The simulated results show that the hydrodynamic pressure distributions for both the journal and thrust bearing are modified due to the coupled effect. The decreased load capacity of the journal bearing and the increased load capacity of the thrust bearing can be observed when the coupled effect is considered. And the coupled effect can facilitate in reducing the asperity contact load for both the journal and thrust bearing. Additionally, the interaction between the mixed lubrication behaviors, especially for the friction coefficient, of the journal and the thrust bearing is significant in the elastohydrodynamic lubrication regime, while it becomes weak in the mixed lubrication regime. Originality/value The developed model can reveal the mutual effects of the mixed lubrication behavior between the journal and the thrust bearing.

Numerical Prediction of Surface Wear and Roughness Parameters During Running-In for Line Contacts Under Mixed Lubrication

2018 ◽  
Vol 140 (6) ◽  
Author(s):  
Yazhao Zhang ◽  
Alexander Kovalev ◽  
Noriyuki Hayashi ◽  
Kensuke Nishiura ◽  
Yonggang Meng
Keyword(s):  
Friction Coefficient ◽  
Contact Region ◽  
Mixed Lubrication ◽  
Asperity Contact ◽  
Wear Particles ◽  
Wear Model ◽  
Wear Process ◽  
Line Contacts ◽  
Lubrication Condition ◽  
Initial Line

A stochastic model for predicting the evolutions of wear profile and surface height probability density function (PDF) of initial line contacts during running-in under mixed lubrication condition is presented. A numerical approach was developed on the basis of stochastic solution of mixed lubrication, which combined the Patir and Cheng's average flow model for calculation of the hydrodynamic pressure and the Kogut and Etsion's (KE) rough surface contact model for calculation of the asperity contact pressure. The total friction force was assumed to be the sum of the boundary friction at the contact asperities and the integration of viscous shear stress in the hydrodynamic region. The wear depth on the contact region was estimated according to the modified Archard's wear model using the asperity contact pressure. Sugimura's wear model was modified and used to link the wear particle size distribution and the variation of surface height PDF during wear. In the wear process, the variations of profile and surface height PDF of initial line contacts were calculated step by step in time, and the pressure distribution, friction coefficient, and wear rate were updated consequently. The effect of size distribution of wear particles on the wear process was numerically investigated, and the simulation results showed that the lubrication condition in which small wear particles are generated from the asperity contact region is beneficial to reduce friction coefficient and wear rate, and leads to a better steady mixed lubrication condition.

Development of a Piston Secondary Motion Model for Skirt Friction Analysis

2012 ◽  
Author(s):  
Ozgur Gunelsu ◽  
Ozgen Akalin
Keyword(s):  
Operating Conditions ◽  
Design Parameters ◽  
Asperity Contact ◽  
Motion Model ◽  
Film Rupture ◽  
Time Step ◽  
Elastic Deformations ◽  
Oil Film ◽  
Piston Skirt ◽  
Secondary Motion

A comprehensive piston skirt lubrication and secondary motion model that can be used for piston friction simulations was developed based on Greenwood and Tripp’s surface asperity contact model and Patir and Cheng’s modified Reynolds equation with surface flow factors. Oil flow between the skirt-liner clearances was modeled and hydrodynamic and asperity contact pressures around the skirt were calculated. Reynolds boundary conditions were applied to determine the film rupture boundaries and wetted areas. Surface roughness and roughness orientation were included in the model. Due to its important effect on pressure development in the oil film, change in the skirt profile due to elastic deformations was taken into account. Change of the skirt profile due to piston thermal expansion is also calculated using the steady-state temperature distribution of the piston corresponding to the investigated engine running conditions. A piston stiffness matrix obtained by finite element analysis was used to determine the elastic deformations of the piston skirt under the calculated oil film pressures. A two-degree-of-freedom system is formed with the forces and moments calculated by the lubrication model. These forces and moments require a coupled solution with piston position. This is achieved by applying an iterative numerical procedure based on Broyden’s scheme which seeks force and moment balance at each iteration phase making use of time step variation. The effects of various engine operating conditions and piston design parameters on piston secondary motion were investigated. Piston skirt friction force due to hydrodynamic shear forces and metal-to-metal contact is calculated.

Effect of surface micro-groove texture on lubrication performance of tripod universal coupling

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Fuqin Yang ◽  
Q.H. Xiao ◽  
Chunhui Geng
Keyword(s):  
Friction Coefficient ◽  
Bearing Capacity ◽  
Geometric Parameters ◽  
Grease Lubrication ◽  
Navier Stokes Equation ◽  
Content Type ◽  
Oil Film ◽  
Lubrication Performance ◽  
Universal Coupling ◽  
Groove Texture

Purpose This study aims to study the effect of micro-groove texture geometric parameters on the lubrication characteristics of the tripod universal coupling. Design/methodology/approach The Navier–Stokes equation was used to analyse the influence of micro-groove geometric parameters on the coupling’s lubrication performance. Further, Kriging approximate model and neighborhood cultivation genetic algorithm (NCGA) were used to optimise the micro-groove geometric parameters and improve the coupling’s lubrication performance. Findings The results show that as the micro-groove depth and width increase, respectively, the oil film-bearing capacity first increases and then decreases; on the contrary, the friction coefficient first decreases and then increases. With the increase of the micro-groove inclination angle, the bearing capacity of the oil film first increases and then remains unchanged. At the same time, the friction coefficient first decreases and then increases slightly. The lubricating performance of the optimised coupling is significantly improved: the optimised oil film-bearing capacity increases by 12.5%, the friction coefficient reduces by 14% and the maximum oil film pressure increases by 4.3%. Originality/value At present, the grease lubrication performance of the micro-groove textured tripod universal coupling has not been studied. The micro-groove parameters are optimised, and the coupling’s lubrication performance is improved greatly by the Kriging model and NCGA algorithm. It is of great significance to extend the coupling’s fatigue life.

The size effect of hexagonal texture on tribological properties under mixed lubrication

2018 ◽  
Vol 70 (9) ◽  
pp. 1798-1805 ◽  
Author(s):  
Long Zheng ◽  
Yihang Gao ◽  
Yinghui Zhong ◽  
Guolong Lu ◽  
Zhenning Liu ◽  
...  
Keyword(s):  
Friction Coefficient ◽  
Size Effect ◽  
Tribological Properties ◽  
Equivalent Stress ◽  
Mixed Lubrication ◽  
Groove Width ◽  
Area Density ◽  
Content Type ◽  
Simulated Distribution ◽  
Similar Area

Purpose The purpose of this study is to elucidate the size effect (groove width, unit length and area density) of the hexagonal texture on tribological properties under lubrication. Design/methodology/approach The tribological properties of nine hexagonal textures with different hexagon lengths and groove widths have been investigated under mixed lubrication to elucidate the size effect. Findings Overall, the friction coefficient decreases as the groove width increases within the examined range, whereas the hexagon length shows an optimal value around 3 mm. In particular, one hexagonal texture (3 × 3 mm) exhibits lower friction coefficients and less wear losses than the others. Interestingly, two hexagonal textures of similar area density (1 × 1 mm and 3 × 3 mm) yield the worst and best tribological performances, respectively, which can be explained by the simulated distribution of equivalent stress. Originality/value The tribological properties of nine hexagonal textures are examined under lubrication. The 3 × 3 texture exhibits lower friction coefficient and wear loss than the others. Two textures of similar area density yield the worst and best tribological performances. The results agree with the simulated distribution of equivalent stress.

Contact Damping and Stiffness Calculation Model for Rough Surface Considering Lubrication in Involute Spur Gear

2021 ◽  
Author(s):  
Gong Cheng ◽  
Ke Xiao ◽  
Jiaxu Wang
Keyword(s):  
Film Thickness ◽  
Contact Stiffness ◽  
Elastohydrodynamic Lubrication ◽  
Spur Gear ◽  
Calculation Model ◽  
Mixed Lubrication ◽  
Asperity Contact ◽  
Crucial Point ◽  
Normal Deformation ◽  
Oil Film

The contact properties of an interface are crucial to the performance of equipment, and it is necessary to study the contact damping and contact stiffness, especially in the case of mixed lubrication. A calculation model for contact damping and contact stiffness considering lubrication was proposed on the basis of the KE contact model and mixed elastohydrodynamic lubrication theory. Both the damping and the stiffness were composed of the oil film portion and the asperity contact portion. Since the damping and the stiffness of oil film mainly depended on the film thickness and the pressure, which can be obtained with the mixed lubrication model, another crucial point was to figure out the contribution of asperity contact. Ignoring the effect of the tangential deformation, the stiffness and the load determined with the normal deformation of the asperity were obtained. Then, the contact damping and the contact stiffness considering lubrication could be derived. Finally, the model was applied to the study of contact damping and stiffness of the involute spur gear.

Analysis of influencing factors on oil film shear torque of hydro-viscous drive

2018 ◽  
Vol 70 (7) ◽  
pp. 1169-1175 ◽  
Author(s):  
Hongwei Cui ◽  
Zisheng Lian ◽  
Long Li ◽  
Qiliang Wang
Keyword(s):  
Influencing Factors ◽  
Experimental Research ◽  
Flow Rate ◽  
Rotation Speed ◽  
Calculation Model ◽  
Film Rupture ◽  
Equivalent Radius ◽  
Content Type ◽  
Oil Film ◽  
Save Energy

Purpose The hydro-viscous drive (HVD) has been widely used in fan transmission in vehicles, fans, and scraper conveyors for step-less speed regulating and soft starting. It is an efficient method to save energy and reduce consumption. This study aims to analyze the influencing factors of oil film shear torque accurately. Design/methodology/approach The shear torque calculation model of double arc oil groove friction pairs was established. The influence of groove structure parameters on shear torque was analyzed. The interaction between viscosity temperature and shear torque was considered. Meanwhile, the equivalent radius was calculated when the rupture of oil film appeared. Finally, the test rig of torque characteristics was set up. The variance of shear torque with the input rotation speed under different oil film thickness, different oil temperature, and different flow rate was seen. Findings The results show that the shear torque increases with the growth of rotation speed. However, the increase of torque is quite gradual because of the effect of the change of viscosity, which is caused by the rise of temperature. The shear torque increases with the decrease of thickness, the increase of inlet flow rate, and the decrease of inlet oil temperature. Meanwhile, when the feeding flow rate is less than the theoretical, the oil film gets ruptured and the shear torque decreases sharply. Originality/value The influence on shear torque during full film shear stage in HVD can be achieved much more accurately through both experimental research and theoretical modeling in which groove parameters, influence of temperature, and oil film rupture are considered. Therefore, the shear torque of HVD can be predicted by theoretical model and experimental research in full film shear stage.

Sign in / Sign up

Export Citation Format

Share Document