Linear and non-linear analysis on two-dimensional steel frame under different temperatures

2019 ◽  
Vol 10 (1) ◽  
pp. 48-55
Author(s):  
Parthasarathi N. ◽  
Satyanarayanan K.S. ◽  
Prakash M. ◽  
Thamilarasu V.
Keyword(s):  
High Temperatures ◽  
Progressive Collapse ◽  
Transient State ◽  
Steel Frame ◽  
Frame Structure ◽  
Two Dimensional ◽  
Content Type ◽  
Frame Building ◽  
Different Temperatures ◽  
Steel Frame Structure

Purpose Progressive collapse because of high temperatures arising from an explosion, vehicle impact or fire is an important issue for structural failure in high-rise buildings. Design/methodology/approach The present study, using ABAQUS software for the analysis, investigated the progressive collapse of a two-dimensional, three-bay, four-storey steel frame structure from high-temperature stresses. Findings After structure reaches the temperature results like displacement, stress axial load and shear force are discussed. Research limitations/implications Different temperatures were applied to the columns at different heights of a structure framed with various materials. Progressive collapse load combinations were also applied as per general service administration guidelines. Originality/value This study covered both steady-state and transient-state conditions of a multistorey-frame building subjected to a rise in temperature in the corner columns and intermediate columns. The columns in the framed structure were subjected to high temperatures at different heights, and the resulting displacements, stresses and axial loads were obtained, analysed and discussed.

Linear analysis of a three-dimensional multistorey steel-frame structure under varying temperatures

2019 ◽  
Vol 10 (1) ◽  
pp. 110-122 ◽  
Author(s):  
Parthasarathi N. ◽  
Satyanarayanan K.S. ◽  
Thamilarau V. ◽  
Prakash M.
Keyword(s):  
Progressive Collapse ◽  
Three Dimensional ◽  
Linear Analysis ◽  
Steel Frame ◽  
Frame Structure ◽  
Effect Of Temperature ◽  
Content Type ◽  
Moment Resisting ◽  
Collapse Behavior ◽  
Steel Frame Structure

PurposeThe purpose of this study is progressive collapse behavior in buildings. It occurs due to removal/damage of a column by fire, blast or vehicle impact.Design/methodology/approachThe present study investigates the comparative behavior of 3D four-storey moment resisting steel frame using ABAQUS to predict the sensitivity of the structure in progressive collapse because of fire loads. Columns at different levels were given different temperature with reduced material properties and yield strength. Progressive collapse load combination was adopted as per General Service Administration guidelines. Corner, middle, intermediate, multiple corner and multiple intermediate columns were subjected to fire load separately.FindingsThe results for displacement, stress, shear force and axial force were captured and discussed.Originality/valueThe study covers linear analysis of steel frame because of different temperature. In linear analysis. columns were subjected to different temperature and their results were studied. Effect of temperature in the structure were captured because of different fire conditions.

A New Measure to Reduce the Potential for Progressive Collapse of Steel Frame Structure

2012 ◽  
Vol 256-259 ◽  
pp. 905-910
Author(s):  
Chuan Qing Liu ◽  
Zuo Yun Mei ◽  
Xue Guang Gao
Keyword(s):  
Progressive Collapse ◽  
Vertical Displacement ◽  
Steel Frame ◽  
Frame Structure ◽  
Plastic Hinges ◽  
Column Removal ◽  
Steel Frame Structures ◽  
The Moment ◽  
Bracing System ◽  
Steel Frame Structure

In order to improve the capacity of resistance to progressive collapse for steel frame structures, a new measure, which uses bracing systems to help damaged frame to bridge across the local damage caused by abnormal loads, is presented in this study. The dynamic progressive collapse analysis is carried out to investigate the effect of resistance to progressive collapse in two different cases of column removal. Analytical results show that bracing systems on the top of steel frame structure have obvious effects on collapse prevention. Comparison with the unbraced steel frame structure, fixing bracing system could decrease the vertical displacement of the node corresponding to the top of the removed columns, and reduce the moment peak value at the end section of beams. And after column removal, plastic hinges come into being in the unbraced steel frame, on the other hand, there are no plastic hinges formed in the steel frame with bracing system.

Effects of Braces on Progressive Collapse Resistance of Steel Frame

2014 ◽  
Vol 578-579 ◽  
pp. 369-373
Author(s):  
Li Chang Dong ◽  
Lai Wang
Keyword(s):  
Axial Force ◽  
Progressive Collapse ◽  
Nonlinear Dynamic Analysis ◽  
Vertical Displacement ◽  
Steel Frame ◽  
Frame Structure ◽  
Collapse Resistance ◽  
Failure Point ◽  
Steel Frame Structure ◽  
Progressive Collapse Analysis

In order to carry on the progressive collapse analysis more properly, nonlinear-dynamic analysis method is used to analyze five-storey of steel frame structure. Four structure schemes have been established, namely frames, frames with horizontal braces, frames with vertical braces and frames with horizontal cross braces. According to analyzing with different position of failure column on the first floor, the curves of displacement-time of column failure point and axial force of failure column’s neighboring are obtained. The results indicate that horizontal braces can reduce the vertical displacement above damaged column and the axial force of the columns on the first floor evidently. The vertical displacement of horizontal cross braces is less than which of horizontal braces.

Analytical Investigation of Progressive Collapse Resistance Mechanism in Steel Moment Frame with Fiber Model

2012 ◽  
Vol 166-169 ◽  
pp. 1848-1853 ◽  
Author(s):  
Chuan Qing Liu ◽  
Zuo Yun Mei
Keyword(s):  
Progressive Collapse ◽  
Resistance Mechanism ◽  
Element Model ◽  
Steel Frame ◽  
Frame Structure ◽  
Load Path ◽  
Bending Resistance ◽  
Column Removal ◽  
Steel Frame Structure ◽  
Middle Column

In order to investigate the resistance mechanism of steel frame structure in progressive collapse, an advanced finite element model(FEM) is presented based on fiber beam-column element. Using this FEM, non-linear static pushdown analysis of a ten-story structure was carried out by the alternate load path method, in the two cases that two different columns are removed respectively. Analytical results show that residual structure has the different resistance mechanism for the different column removal case. In the initial stage, bending resistance mechanism can provide dominate resistance capacity in the structural progressive collapse, after both middle and side columns are removed. However, when the bending resistance is out of work, the catenary action is induced in the case of the middle column removal only, which is not developed after the side column is removed. It can be seen that steel frame structure has higher collapse risk in the case of the side column removal than in the case of the middle column removal.

scholarly journals Analysis of the robustness of a steel frame structure with composite floors subject to multiple fire scenarios

2021 ◽  
pp. 136943322199249
Author(s):  
Riza Suwondo ◽  
Lee Cunningham ◽  
Martin Gillie ◽  
Colin Bailey
Keyword(s):  
Progressive Collapse ◽  
Three Dimensional ◽  
Steel Structure ◽  
Frame Structure ◽  
Worst Case ◽  
Collapse Resistance ◽  
Fire Scenarios ◽  
Element Approach ◽  
The One ◽  
Steel Frame Structure

This study presents robustness analyses of a three-dimensional multi-storey composite steel structure under the action of multiple fire scenarios. The main objective of the work is to improve current understanding of the collapse resistance of this type of building under different fire situations. A finite element approach was adopted with the model being firstly validated against previous studies available in the literature. The modelling approach was then used to investigate the collapse resistance of the structure for the various fire scenarios examined. Different sizes of fire compartment are considered in this study, starting from one bay, three bays and lastly the whole ground floor as the fire compartment. The investigation allows a fundamental understanding of load redistribution paths and member interactions when local failure occurs. It is concluded that the robustness of the focussed building in a fire is considerably affected by the size of fire compartments as well as fire location. The subject building can resist progressive collapse when the fire occurs only in the one-bay compartment. On the other hand, total collapse occurs when fire is located in the edge three-bay case. This shows that more than one fire scenario needs to be taken into consideration to ensure that a structure of this type can survive from collapse in the worst-case situation.

Experimental Research and Finite Element Analysis on Behavior of Steel Frame with Semi-Rigid Connections

2010 ◽  
Vol 168-170 ◽  
pp. 553-558
Author(s):  
Feng Xia Li ◽  
Bu Xin
Keyword(s):  
Architectural Design ◽  
Plastic Hinge ◽  
Steel Frames ◽  
Seismic Energy ◽  
Internal Force ◽  
Steel Frame ◽  
Frame Structure ◽  
Element Analysis ◽  
Rigid Deformation ◽  
Steel Frame Structure

Most steel beam-column connections actually show semi-rigid deformation behavior that can contribute substantially to overall displacements of the structure and to the distribution of member forces. Steel frame structure with semi-rigid connections are becoming more and more popular due to their many advantages such as the better satisfaction with the flexible architectural design, low inclusive cost and environmental protect as well. So it is very necessary that studying the behavior of those steel frame under cyclic reversal loading. On the basics of connections experiments the experiment research on the lateral resistance system of steel frame structure has been completed. Two one-second scale, one-bay, two-story steel frames with semi-rigid connections under cyclic reversal loading. The seismic behavior of the steel frames with semi-rigid connections, including the failure pattern, occurrence order of plastic hinge, hysteretic property and energy dissipation, etc, was investigated in this paper. Some conclusions were obtained that by employing top-mounted and two web angles connections, the higher distortion occurred in the frames, and the internal force distributing of beams and columns was changed, and the ductility and the absorbs seismic energy capability of steel frames can be improved effectively.

Sign in / Sign up

Export Citation Format

Share Document