Quality characteristics and overall acceptability of steamed and boiled blue whiting fish (Micromesistius poutassou) cracker

2016 ◽  
Vol 46 (6) ◽  
pp. 857-870
Author(s):  
Olufunmilayo Sade Omoba ◽  
Hafsat Idowu Azeez

Purpose This paper focuses on the quality characteristics of steamed and boiled blue whiting fish (Micromesistius poutassou) cracker, with the aim of encouraging and promoting the use of this small pelagic inexpensive, readily available fish in food production and reducing post-harvest losses of the fish. Design/methodology/approach The blue whiting fish cracker was developed using boiling and steaming methods. Minced blue whiting fish meat was mixed with cassava starch in the ratio of 50:50, and other ingredients were incorporated. The dough obtained was divided into two and stuffed into two different muslin cloths. One of the stuffed dough was steamed (100°C for 15 min), whereas the other was boiled in water for 90 min. The boiled and steamed doughs were cooled at 4°C for 12 h, sliced at 2 mm thickness and oven dried at 50°C for 12 h to obtain non-expanded blue whiting fish crackers. The non-expanded blue whiting fish crackers were fried in vegetable oil to obtain expanded blue whiting fish crackers. The quality characteristics of the expanded crackers were determined using standard methods, and data obtained were subjected to analysis of variance; the mean scores were compared using Turkey’s (HSD) test. The sensory evaluation was done using 25 untrained panellists, and results were analysed statistically. Findings The study revealed the steamed fish cracker has significantly higher nutritional composition in terms of the proximate, mineral, fatty acid and amino acid compositions. Potassium was the most predominant mineral in the crackers, and copper was the least predominant mineral. The saturated fatty acid contents were 43.2 per cent (steamed) and 48.6 per cent (boiled), whereas the unsaturated fatty acid contents were 55.5 (steamed) and 48.5 per cent (boiled). The n6/n3 ratio obtained for steamed and boiled fish cracker was 4.0. The steamed fish cracker had a higher L* value, whereas the Brown index (100 − L*) of the steamed fish cracker was lower (33.4) than that of the boiled fish cracker. The linear expansion was higher for the boiled blue whiting fish crackers (41.8 per cent). The boiled blue whiting fish cracker had higher expanded starch structure than the steamed blue whiting fish cracker. The aroma and taste were highly correlated with overall acceptability. Originality/value The paper reports the quality characteristics and overall acceptability of steamed and boiled blue whiting fish crackers.

2019 ◽  
Vol 3 (Supplement_1) ◽  
Author(s):  
Rebecca Obafaye ◽  
Matthew Ohida ◽  
Aderonke Olagunju ◽  
Funmilayo Omoba

Abstract Objectives This study sought to prepare biscuit from composite flours of sweet potato and tiger nut flour blends as well as to evaluate nutritional composition and consumer acceptability of formulated biscuits. Methods Sweet potato was purchased at Federal University of Technology Research farm, Akure, Nigeria. Tiger nut (brown variety) and other principal ingredients (sugar, fat and salt) were purchased from Oba market in Akure, Nigeria. All chemicals used were of analytical grade. The sweet potato tuber was processed into flour according to the method described by (Noorakmar, et al., 2012) with slight modification. Tiger nut was processed into flour according to the method described by Awolu, et al (2017). Percentage of TNF in SPF was 10% (SWT10), 20% (SWT20), and 30% (SWT30) while SPF 100% (SWT0) served as control. The procedure for making the biscuits was produced according to the method of AACC, (2000) Moisture, protein, fat, crude fiber, and ash contents were determined according to the method described by A.O.A.C. (2005). Carbohydrate was calculated by difference. Mineral analysis were determined as described by A.O.A.C. (2005), The dietary fiber content of PM-OP biscuits was determined using the described method of the A.O.A.C. (2005). Fatty acid composition was analyzed using the gas liquid chromatography (GLC) as described by Stahle, E. (1967). Sensory evaluation of the formulated biscuit was carried out using 9-point hedonic scale as described by Kaur.et al., (2015) Results Protein content range from 1.74 to 7.53%, fat content range from 2.05 to 12.77%, crude fibre range from 0.63 to 3.81%, ash content range from 5.89–6.68%, moisture content range from 3.84 to 9.84%. Potassium was the most abundant mineral content present in the biscuit and its value ranges from 11.50 to 41.20 mg/100 g. DF increased significantly (P < 0.05) with an increase in Tiger nut. The total dietary fibre value range from 7.15 to 8.69%, the ratio of soluble to insoluble dietary fibre was 3:1. The predominant fatty acid in the biscuit is linoleic acid followed by oleic acid. The overall acceptability revealed that SWT20 was the most acceptable of the biscuits. Conclusions Consumption of fibre-rich biscuit from the blends of sweet potato and tigernut flour could serve as a nutritious snacks capable to reduced the menace of degenerated diseases in a riotous economy Funding Sources None. Supporting Tables, Images and/or Graphs


2015 ◽  
Vol 45 (5) ◽  
pp. 774-782 ◽  
Author(s):  
Swati Gupta ◽  
B. D. Sharma ◽  
S. K. Mendiratta

Purpose – This study aims to evaluate the effect of oat meal on the quality characteristics of restructured spent hen meat blocks. Spent hen meat is considered as poor because of comparatively higher toughness and less juiciness. Design/methodology/approach – Oat meal (1:1 hydration, w/w) was incorporated at the levels of 4, 6 and 8 per cent by replacing the lean meat in prestandardized restructured spent hen meat blocks formulation and assessed for physico-chemical and sensory quality. Findings – The product yield and pH of restructured spent hen meat blocks (RSHMB) were significantly higher at 8 per cent oat meal as compared to control. Shear force values of RSHMB with various levels of oat meal incorporation were significantly lower than control. There were no significant differences in the general appearance, texture, binding, juiciness and overall acceptability scores of RSHMB with different levels of oat meal and control. However, there was a marginal increase in binding and juiciness of RSHMB with increase in the level of oat meal. The optimum incorporation level of oat meal in RSHMB was adjudged as 8 per cent, which also resulted in reduction of production cost by Rs. 14.4/kg as compared to control. Research limitations/implications – The trials can be further carried to evaluate the storage stability of developed RSHMB. Originality/value – The paper has demonstrated potential of oat meal as an extender in the development of RSHMB, which also reduced the cost of production.


2016 ◽  
Vol 46 (4) ◽  
pp. 571-582 ◽  
Author(s):  
Gurnoor Kaur Lubana ◽  
Baljot Kaur Randhawa ◽  
Vijay Kumar Reddy Surasani ◽  
Ajeet Singh

Purpose This study aims to develop fiber-enriched cutlets from minced meat of rohu and study the effects of fiber inclusion on composition, cooking properties and acceptability of cutlets. Design/methodology/approach Cutlet mix prepared using rohu mince was divided into four lots, out of which three lots were enriched with fibers from ragi (RFC), jowar (JFC) and oat (OFC) at 10 per cent over and above its quantity. Prepared cutlets were analyzed for nutritional composition, texture, cooking properties and sensorial quality. Findings Moisture, protein, fat, fiber and ash contents (per cent) of the fiber-enriched cutlets ranged between 40.4-42.0, 24.5-25.5, 13.2-14.7, 1.8-2.0 and 2.4-2.5 per cent, respectively. The addition of fibers increased the cooking yield of cutlets from 84.6 to 87.5 per cent. RFC lot cutlets had the lowest whiteness values and the highest hardness and shear force values. Cutlets from all the lots had an overall acceptability scores more than 7.0, indicating the sensorial acceptability. Although the differences were insignificant, cutlets from the RFC lot were less acceptable, which might be because of the dark color and tough texture. Hence, jowar and oat flour at 10 per cent can be used to enrich rohu cutlets without affecting their sensorial acceptability. Research limitations/implications Sources of fiber will be the major limitation in the work, as the fiber inclusion may negatively affect the quality and acceptability of cutlets. Time of cooking will also influence the final product characteristics, which need to be standardized. Practical implications Fish is a rich source of protein but lacks fiber, which is essential for body metabolism. Grains are rich source of fibers but lack some essential nutrients required by the body. In India, many people are dependent on fish for protein due to its high nutritious value. So enriching fish meat with fiber sources will address the health-related problems associated with low-fiber diets. The methodology developed in this work can be used to fulfill the demand for balanced and nutritious diet. Because of increasing health awareness, fish products with added fiber will also increase its market potential. Social implications The methodology developed can be used by small-scale entrepreneurs to earn more income by developing functional fish products with low-cost ingredients. The developed products will not only address the issues related to the consumption of low-fiber diets but also create a market for fish products because of their health-benefiting effects. Originality/value The work is completely original in nature. The results reported are unique and the outcome of the research has social applicability.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Aaqib Nisar ◽  
Nusrat Jan ◽  
Amir Gull ◽  
Farooq Ahmad Masoodi ◽  
Tawheed Amin ◽  
...  

PurposeThe demand for functional foods has been increasing tremendously throughout the globe and keeping in view the health beneficial properties of apricot fruit. The purpose of this study is to develop wheat flour based cookies enriched with apricot pulp powder in order to improve nutraceutical properties of cookies and dilution of gluten at the same time.Design/methodology/approachCookies were prepared from wheat flour blended with apricot pulp powder at 0, 10, 15, 20 and 25% level and evaluated for proximate, functional, rheological, nutraceutical and sensory properties.FindingsFibre content of apricot powder-incorporated cookies (3.23%) was significantly (p < 0.05) higher at 25% level than control (1.64%). The water absorption and oil absorption capacities decreased significantly (p < 0.05) upon increasing level of apricot pulp powder. The ß-carotene content, antioxidant activity and total phenolic content increased significantly (p < 0.05) upon incorporation of apricot pulp powder. The thickness of cookies increased, however, diameter and spread ratio decreased with increase in the levels of apricot pulp powder. Lightness (L*) value decreased, while redness (a*) and yellowness (b*) increased when incorporated with apricot pulp powder. Cookies having 25% apricot pulp powder showed maximum hardness and overall acceptability.Originality/valueTo the best of our knowledge, the scientific literature on incorporation of apricot pulp powder in bakery products is scanty. As such the present research has a tremendous scope for the food industries to produce functional bakery products with antioxidant properties and diluted the gluten content at the same time.


2020 ◽  
Vol 50 (6) ◽  
pp. 1267-1277 ◽  
Author(s):  
P.D. Shere ◽  
Prashant Sahni ◽  
A.N. Devkatte ◽  
V.N. Pawar

Purpose Noodles are good vehicles for the enrichment and can be enriched with vegetable purees. However, this enrichment can alter quality attributes of noodles with resultant effect on its sensorial attributes. The purpose of this paper is to study the effect of addition of different hydrocolloids on the microstructural and quality characteristics of instant noodles enriched with spinach puree. Design/methodology/approach Preliminary trials were carried out for the standardization level of addition of spinach puree in noodle formulation. Carboxymethyl cellulose (CMC) and guar gum were added in the noodle formulation at 0.25, 0.5 and 0.75 per cent level of incorporation. The effect of addition of hydrocolloids was evaluated on the cooking quality, sensory attributes, texture characteristics and microstructure of the noodles. Findings The most acceptable ratio for the formulation of the noodles was found to be 40 g spinach puree per 100 g refined wheat flour. Addition of hydrocolloids resulted in the increase in the cooking time, cooking weight, water absorption and swelling index. Significant decrease in the cooking loss was observed with the increase in the level of CMC (from 7.4 to 6.1 per cent) and guar gum (from 7.4 to 7 per cent). Addition of CMC and guar gum up to 0.5 per cent and 0.25 per cent, respectively, improved the texture, overall acceptability and mouthfeel attributing to complimentary interaction between starch, fibre and hydrocolloids observed at microstructural level; however, further increase in the level of incorporation resulted in stickiness and sliminess in the noodle strands. Practical implications It is found that 0.5 per cent CMC and 0.25 per cent guar gum can be used for the enhancement of quality characteristics of the spinach puree enriched noodles. Originality/value Intervention of incorporation of hydrocolloids in spinach puree–enriched instant noodles delivers healthy and nutritious product without compromising on its sensorial and quality attributes.


2021 ◽  
Vol 33 (1) ◽  
Author(s):  
Katharina Kawall

Abstract‘Genome editing’ is intended to accelerate modern plant breeding enabling a much faster and more efficient development of crops with improved traits such as increased yield, altered nutritional composition, as well as resistance to factors of biotic and abiotic stress. These traits are often generated by site-directed nuclease-1 (SDN-1) applications that induce small, targeted changes in the plant genomes. These intended alterations can be combined in a way to generate plants with genomes that are altered on a larger scale than it is possible with conventional breeding techniques. The power and the potential of genome editing comes from its highly effective mode of action being able to generate different allelic combinations of genes, creating, at its most efficient, homozygous gene knockouts. Additionally, multiple copies of functional genes can be targeted all at once. This is especially relevant in polyploid plants such as Camelina sativa which contain complex genomes with multiple chromosome sets. Intended alterations induced by genome editing have potential to unintentionally alter the composition of a plant and/or interfere with its metabolism, e.g., with the biosynthesis of secondary metabolites such as phytohormones or other biomolecules. This could affect diverse defense mechanisms and inter-/intra-specific communication of plants having a direct impact on associated ecosystems. This review focuses on the intended alterations in crops mediated by SDN-1 applications, the generation of novel genotypes and the ecological effects emerging from these intended alterations. Genome editing applications in C. sativa are used to exemplify these issues in a crop with a complex genome. C. sativa is mainly altered in its fatty acid biosynthesis and used as an oilseed crop to produce biofuels.


2015 ◽  
Vol 81 (18) ◽  
pp. 6129-6144 ◽  
Author(s):  
Abdulsamie Hanano ◽  
Ibrahem Almousally ◽  
Mouhnad Shaban ◽  
Elizabeth Blee

ABSTRACTCaleosins are a small family of calcium-binding proteins endowed with peroxygenase activity in plants. Caleosin-like genes are present in fungi; however, their functions have not been reported yet. In this work, we identify a plant caleosin-like protein inAspergillus flavusthat is highly expressed during the early stages of spore germination. A recombinant purified 32-kDa caleosin-like protein supported peroxygenase activities, including co-oxidation reactions and reduction of polyunsaturated fatty acid hydroperoxides. Deletion of the caleosin gene prevented fungal development. Alternatively, silencing of the gene led to the increased accumulation of endogenous polyunsaturated fatty acid hydroperoxides and antioxidant activities but to a reduction of fungal growth and conidium formation. Two key genes of the aflatoxin biosynthesis pathway,aflRandaflD, were downregulated in the strains in whichA. flavusPXG(AfPXG) was silenced, leading to reduced aflatoxin B1 productionin vitro. Application of caleosin/peroxygenase-derived oxylipins restored the wild-type phenotype in the strains in whichAfPXGwas silenced.PXG-deficientA. flavusstrains were severely compromised in their capacity to infect maize seeds and to produce aflatoxin. Our results uncover a new branch of the fungal oxylipin pathway and may lead to the development of novel targets for controlling fungal disease.


2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
James Owusu-Kwarteng ◽  
Francis K. K. Kori ◽  
Fortune Akabanda

The objective of this work was to determine the effects of blanching and two drying methods, open-sun drying and natural convection solar drying, on the quality characteristics of red pepper. A 2 × 3 factorial design with experimental factors as 2 drying methods (open-sun drying and use of solar dryer) and 3 levels of pepper blanching (unblanched, blanched in plain water, and blanched in 2% NaCl) was conducted. Dried pepper samples were analysed for chemical composition, microbial load, and consumer sensory acceptability. Blanching of pepper in 2% NaCl solution followed by drying in a natural convection solar dryer reduced drying time by 15 hours. Similarly, a combination of blanching and drying in the solar dryer improved microbial quality of dried pepper. However, blanching and drying processes resulted in reduction in nutrients such as vitamin C and minerals content of pepper. Blanching followed by drying in natural convection solar dryer had the highest consumer acceptability scores for colour and overall acceptability, while texture and aroma were not significantly (p>0.05) affected by the different treatments. Therefore, natural convection solar dryer can be used to dry pepper with acceptable microbial and sensory qualities, as an alternative to open-sun drying.


2017 ◽  
Vol 119 (4) ◽  
pp. 909-920 ◽  
Author(s):  
Jaspreet Kaur ◽  
Amarjeet Kaur ◽  
Jaspreet Singh

Purpose The purpose of this paper is to assess the bioactive ingredients of whole flours of oat, maize and soyabean, utilise them for developing functional cookies and evaluate their physical and nutritional quality parameters. Design/methodology/approach Cookies were prepared from blends of whole flours of wheat, oats, maize and full fat soyabean. Whole wheat and oat flours were blend in different proportions (100:0, 80:20, 60:40, 40:60 and 20:80 and 0:100, wheat:oat, w/w) and supplemented with quality protein maize (QPM) and full fat soyabean flours, at 10 per cent (w/w) each, of the total blend. Cookies were studied for their physical attributes, proximate and nutritional compositions. A significant (p=0.05) increase in spread ratio, crude protein, crude fat and crude fibre contents of the cookies was observed with increase in the proportion of oat flour in the blend. Findings Cookies prepared from blend containing QPM and soyabean flours had higher antioxidant activity than control whole wheat cookies. An increase in extractable β-glucan content and in-vitro protein digestibility was also observed with the increase in the proportion of oat flour. The highest overall acceptability was observed for cookies prepared from blends having a wheat–oat proportion of 60:40. These cookies also had a 17.5 per cent higher genistein content as compared to their raw flour blend. Higher genistein levels were observed in the composite cookies. Originality/value The cookies prepared from composite whole flours rich in isoflavones and β-glucan reflect their potential as a new functional food for the prevention and management of diseases such as cancers, diabetes and cardiovascular disorders.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yutaka Tashiro

Purpose This study aimed to analyze the lipid content and fatty acid composition in the liver and muscle of a porcupinefish species inhabiting waters around the Ryukyu Islands to investigate their potential as a source of long-chain n-3 polyunsaturated fatty acids (LC-PUFAs). Design/methodology/approach Porcupinefish were collected along the Okinawa Island coast. The composition of fatty acids and cholesterol in both liver and muscle were analyzed using a gas chromatograph mass spectrometer. Findings The liver of Okinawan long-spine porcupinefish was rich in lipids whose content correlated to the proportion of liver/body weight. Fatty acid compositions in their liver and muscles were similar to each other. LC-PUFAs occupied 44% of total fatty acids, with docosahexaenoic acid (DHA) being the dominant (42%), whereas eicosapentaenoic acid occupied 2.4%. The liver contained 1,690 mg of cholesterol and 14.8 g of DHA per 100 g, whose proportion decreased in summer compared to other seasons (p = 0.036). Originality/value The liver of Okinawan long-spine porcupinefish, which has not yet been commercially used although its non-toxicity is claimed, can be an excellent source of LC-PUFAs, especially DHA, accentuating its potential in food supplements’ production.


Sign in / Sign up

Export Citation Format

Share Document