NO2 gas sensing properties of bilayer graphene by CVD method

Sensor Review ◽  
2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Hui Li ◽  
Zengwen Zhang ◽  
Ruiyang Fang ◽  
Zhihui Gao ◽  
Wei He
Keyword(s):  
Recovery Time ◽  
Gas Sensing ◽  
Uv Light ◽  
Bilayer Graphene ◽  
Monolayer Graphene ◽  
Content Type ◽  
Desorption Time ◽  
The Difference ◽  
Cu Foil ◽  
Difference Effect

Purpose The authors designed those experiments to test the sensitivity of graphene when it is exposed to NO2 gas, to find a way to decrease the recovery time of graphene and to find the difference effect between monolayer and bilayer graphene in the experiments. Design/methodology/approach The authors transferred graphene from film on Cu foil to NO2 sensor sample and measured the resistances of on monolayer and bilayer graphene when they were exposed to NO2 gas under different concentration; then, the authors obtained the results. Findings The results show that monolayer graphene exhibits a linear response when the NO2 concentration is below 20 ppm. But the monolayer graphene will not be so sensitive to NO2 gas when the concentration continues to reduce. The desorption time of monolayer graphene is longer when compared with bilayer graphene. It shows faster recovery time and higher response of bilayer graphene under low NO2 concentration. And the limit detectable NO2 concentration of bilayer graphene is 50 ppb. Desorption time of bilayer graphene is shortened to below 20 s under UV light. Originality/value The authors found a reliable way to decrease the recovery time of graphene when it is exposed NO2 gas and got the concrete data.

What makes the difference? Employee social media brand engagement

2019 ◽  
Vol 34 (7) ◽  
pp. 1459-1467 ◽  
Author(s):  
Sherese Y. Duncan ◽  
Raeesah Chohan ◽  
João José Ferreira
Keyword(s):  
Social Media ◽  
Brand Equity ◽  
Positive Emotions ◽  
Content Type ◽  
Word Use ◽  
Brand Engagement ◽  
Analytical Thinking ◽  
Industry Competition ◽  
The Difference ◽  
Business To Business

Purpose This paper aims to explore, using the employee lens of business-to-business firms, word use through brand engagement and social media interaction to understand the difference between employees who rate their employer brands highly on social media and those who don't. Design/methodology/approach We conducted a textual content analysis of posts published on the social media job evaluation site glassdoor.com. LIWC software package was used to analyze 30 of the top 200 business-to-business brands listed on Brandwatch using four variables, namely, analytical thinking, clout, authenticity and emotional tone. Findings The results show that employees who rate their employer’s brand low use significantly more words, are significantly less analytic and write with significantly more clout because they focus more on others than themselves. Employees who rate their employer’s brand highly, write with significantly more authenticity, exhibit a significantly higher tone and display far more positive emotions in their reviews. Practical implications Brand managers should treat social media data disseminated by individual stakeholders, like the variables used in this study (tone, word count, frequency), as a valuable tool for brand insight on their industry, competition and their own brand equity, now and especially over time. Originality/value This study provides acknowledgement that social media is a significant source of marketing intelligence that may improve brand equity by better understanding and managing brand engagement.

scholarly journals First-Principles Study of Au-Doped InN Monolayer as Adsorbent and Gas Sensing Material for SF6 Decomposed Species

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1708
Author(s):  
Ruochen Peng ◽  
Qu Zhou ◽  
Wen Zeng
Keyword(s):  
Power Systems ◽  
Molecular Orbital ◽  
First Principles ◽  
Recovery Time ◽  
Sulfur Hexafluoride ◽  
Gas Sensing ◽  
Normal Operation ◽  
Frontier Molecular Orbital ◽  
Adsorption System ◽  
Sensing Material

As an insulating medium, sulfur hexafluoride (SF6) is extensively applied to electrical insulation equipment to ensure its normal operation. However, both partial discharge and overheating may cause SF6 to decompose, and then the insulation strength of electrical equipment will be reduced. The adsorption properties and sensing mechanisms of four SF6 decomposed components (HF, SO2, SOF2 and SO2F2) upon an Au-modified InN (Au-InN) monolayer were studied in this work based on first-principles theory. Meanwhile, the adsorption energy (Ead), charge transfer (QT), deformation charge density (DCD), density of states (DOS), frontier molecular orbital and recovery property were calculated. It can be observed that the structures of the SO2, SOF2 and SO2F2 molecules changed significantly after being adsorbed. Meanwhile, the Ead and QT of these three adsorption systems are relatively large, while that of the HF adsorption system is the opposite. These phenomena indicate that Au-InN monolayer has strong adsorption capacity for SO2, SOF2 and SO2F2, and the adsorption can be identified as chemisorption. In addition, through the analysis of frontier molecular orbital, it is found that the conductivity of Au-InN changed significantly after adsorbing SO2, SOF2 and SO2F2. Combined with the analysis of the recovery properties, since the recovery time of SO2 and SO2F2 removal from Au-InN monolayer is still very long at 418 K, Au-InN is more suitable as a scavenger for these two gases rather than as a gas sensor. Since the recovery time of the SOF2 adsorption system is short at 418 K, and the conductivity of the system before and after adsorption changes significantly, Au-InN is an ideal SOF2 gas-sensing material. These results show that Au-InN has broad application prospects as an SO2, SOF2 and SO2F2 scavenger and as a resistive SOF2 sensor, which is of extraordinary meaning to ensure the safe operation of power systems. Our calculations can offer a theoretical basis for further exploration of gas adsorbent and resistive sensors prepared by Au-InN.

scholarly journals Developmentally Regulated Oscillations in the Expression of UV Repair Genes in a Soilborne Plant Pathogen Dictate UV Repair Efficiency and Survival

mBio ◽  
2019 ◽  
Vol 10 (6) ◽  
Author(s):  
Shira Milo-Cochavi ◽  
Sheera Adar ◽  
Shay Covo
Keyword(s):  
Gene Expression ◽  
Fusarium Oxysporum ◽  
Plant Pathogen ◽  
Uv Light ◽  
Sun Exposure ◽  
The Sun ◽  
Repair Gene ◽  
Repair Capacity ◽  
Content Type ◽  
Repair Genes

ABSTRACT The ability to withstand UV damage shapes the ecology of microbes. While mechanisms of UV tolerance were extensively investigated in microorganisms regularly exposed to the sun, far less is known about UV repair of soilborne microorganisms. Fusarium oxysporum is a soilborne fungal plant pathogen that is resistant to UV light. We hypothesized that its UV repair capacity is induced to deal with irregular sun exposure. Unlike the SOS paradigm, our analysis revealed only sporadic increases and even decreases in UV repair gene expression following UVC irradiation or exposure to visible light. Strikingly, a major factor determining the expression of UV repair genes was the developmental status of the fungus. At the early stages of germination, the expression of photolyase increased while the expression of UV endonuclease decreased, and then the trend was reversed. These gene expression oscillations were dependent on cell cycle progression. Consequently, the contribution of photoreactivation to UV repair and survival was stronger at the beginning of germination than later when a filament was established. F. oxysporum germinates following cues from the host. Early on in germination, it is most vulnerable to UV; when the filament is established, the pathogen is protected from the sun because it is already within the host tissue. IMPORTANCE Fusarium oxysporum infects plants through the roots and therefore is not exposed to the sun regularly. However, the ability to survive sun exposure expands the distribution of the population. UV from the sun is toxic and mutagenic, and to survive sun exposure, fungi encode several DNA repair mechanisms. We found that Fusarium oxysporum has a gene expression program that activates photolyase at the first hours of germination when the pathogen is not established in the plant tissue. Later on, the expression of photolyase decreases, and the expression of a light-independent UV repair mechanism increases. We suggest a novel point of view to a very fundamental question of how soilborne microorganisms defend themselves against sudden UV exposure.

Disposition effect at the market level: evidence from Indian stock market

2019 ◽  
Vol 12 (2) ◽  
pp. 69-82
Author(s):  
Sravani Bharandev ◽  
Sapar Narayan Rao
Keyword(s):  
Trading Volume ◽  
Stock Exchange ◽  
Reference Points ◽  
Disposition Effect ◽  
Content Type ◽  
Ex Post ◽  
Abnormal Trading Volume ◽  
The Difference ◽  
Trading Volumes ◽  
Indian Stock Market

Purpose The purpose of this paper is to test the disposition effect at market level and propose an appropriate reference point for testing disposition at market level. Design/methodology/approach This is an empirical study conducted on 500 index stocks of NSE500 (National Stock Exchange). Winning and losing days for each stock are calculated using 52-week high and low prices as reference points. To test disposition effect, abnormal trading volumes of stocks are regressed on their percentage of winning (losing) days. Further using ANOVA, the difference between mean of percentage of winning (losing) days of high abnormal trading volume deciles and low abnormal trading volume deciles is tested. Findings Results show that a stock’s abnormal trading volume is positively influenced by the percentage of winning days whereas percentage of losing days show no such effect. Findings are consistent even after controlling for volatility and liquidity. ANOVA results show the presence of high percentage of winning days in higher deciles of abnormal trading volumes and no such pattern in case of losing days confirms the presence of disposition effect. Further an ex post analysis indicates that disposition prone investors accumulate losses. Originality/value This is the first study, which proposes the use of 52-week high and low prices as reference points to test the market-level disposition effect. Findings of this study enhance the limited literature available on disposition effect in emerging markets by providing evidence from Indian stock markets.

Workspace, dexterity and dimensional optimization of microhexapod

2015 ◽  
Vol 35 (4) ◽  
pp. 341-347 ◽  
Author(s):  
E. Rouhani ◽  
M. J. Nategh
Keyword(s):  
Degrees Of Freedom ◽  
Optimization Problem ◽  
Screw Theory ◽  
Design Parameters ◽  
Dimensional Synthesis ◽  
Content Type ◽  
Workspace Analysis ◽  
The Difference ◽  
Flexure Joints ◽  
6 Degrees Of Freedom

Purpose – The purpose of this paper is to study the workspace and dexterity of a microhexapod which is a 6-degrees of freedom (DOF) parallel compliant manipulator, and also to investigate its dimensional synthesis to maximize the workspace and the global dexterity index at the same time. Microassembly is so essential in the current industry for manufacturing complicated structures. Most of the micromanipulators suffer from their restricted workspace because of using flexure joints compared to the conventional ones. In addition, the controllability of micromanipulators inside the whole workspace is very vital. Thus, it is very important to select the design parameters in a way that not only maximize the workspace but also its global dexterity index. Design/methodology/approach – Microassembly is so essential in the current industry for manufacturing complicated structures. Most of the micromanipulators suffer from their restricted workspace because of using flexure joints compared to the conventional ones. In addition, the controllability of micromanipulators inside the whole workspace is very vital. Thus, it is very important to select the design parameters in a way that not only maximize the workspace but also its global dexterity index. Findings – It has been shown that the proposed procedure for the workspace calculation can considerably speed the required calculations. The optimization results show that a converged-diverged configuration of pods and an increase in the difference between the moving and the stationary platforms’ radii cause the global dexterity index to increase and the workspace to decrease. Originality/value – The proposed algorithm for the workspace analysis is very important, especially when it is an objective function of an optimization problem based on the search method. In addition, using screw theory can simply construct the homogeneous Jacobian matrix. The proposed methodology can be used for any other micromanipulator.

Parental leave length, social norms, and female labor market re-entry frictions

2018 ◽  
Vol 39 (4) ◽  
pp. 600-620 ◽  
Author(s):  
Vojtech Bartoš ◽  
Barbara Pertold-Gebicka
Keyword(s):  
Labor Market ◽  
Social Norms ◽  
Job Search ◽  
Social Norm ◽  
Parental Leave ◽  
Human Resource Managers ◽  
Content Type ◽  
Job Applicant ◽  
Employment Gaps ◽  
The Difference

Purpose The purpose of this paper is to identify the role of employers in creating employment gaps among women returning to the labor market after parental leaves of different durations. Design/methodology/approach The authors use a controlled correspondence field experiment that orthogonally manipulates parental leave length and the quality of fictitious female job candidates. The experiment is complemented with a survey among human resource managers. Findings High-quality candidates receive more interview invitations when applying after a short parental leave, while low-quality (LQ) candidates receive more interview invitations when applying after a typical three years long parental leave. Survey results suggest that the difference in invitations between short and typical leave treatments is driven by a social norm that mothers should stay home with children younger than three. Productivity gains from employing a LQ job applicant with a shorter career break might not be high enough to outweigh the adverse social norm effect. Social implications The presented results point toward the strong effect of prevailing social norms on job search prospects of women returning to the labor market after parental leave. Originality/value A correspondence experiment has not been used before to study the relationship between time spent on leave and the labor market prospects of mothers. It also extends research on social norms to the domain of hiring decisions.

Associated change in plantar temperature and sweating after transthoracic endoscopic T2–3 sympathectomy for palmar hyperhidrosis

2001 ◽  
Vol 95 (1) ◽  
pp. 58-63 ◽  
Author(s):  
Han-Jung Chen ◽  
Cheng-Loong Liang ◽  
Kang Lu
Keyword(s):  
Skin Temperature ◽  
Temperature Change ◽  
The Body ◽  
Palmar Hyperhidrosis ◽  
Compensatory Sweating ◽  
Content Type ◽  
Postoperative Changes ◽  
The Face ◽  
The Difference ◽  
Fine Print

Object. Transthoracic endoscopic T2–3 sympathectomy is currently the treatment of choice for palmar hyperhidrosis. Compensatory sweating of the face, trunk, thigh, and sole of the foot was found in more than 50% of patients who underwent this procedure. The authors conducted this study to investigate the associated intraoperative changes in plantar skin temperature and postoperative plantar sweating. Methods. One hundred patients with palmar hyperhidrosis underwent bilateral transthoracic endoscopic T2–3 sympathectomy. There were 60 female and 40 male patients who ranged in age from 13 to 40 years (mean age 21.6 years). Characteristics studied included changes in palmar and plantar skin temperature measured intraoperatively, as well as pre- and postoperative changes in plantar sweating and sympathetic skin responses (SSRs). In 59 patients (59%) elevation of plantar temperature was demonstrated at the end of the surgical procedure. In this group, plantar sweating was found to be exacerbated in three patients (5%); plantar sweating was improved in 52 patients (88.1%); and no change was demonstrated in four patients (6.8%). In the other group of patients in whom no temperature change occurred, increased plantar sweating was demonstrated in three patients (7.3%); plantar sweating was improved in 20 patients (48.8%); and no change was shown in 18 patients (43.9%). The difference between temperature and sweating change was significant (p = 0.001). Compared with the presympathectomy rate, the rate of absent SSR also significantly increased after sympathectomy: from 20 to 76% after electrical stimulation and 36 to 64% after deep inspiration stimulation, respectively (p < 0.05). Conclusions. In contrast to compensatory sweating in other parts of the body after T2–3 sympathetomy, improvement in plantar sweating was shown in 72% and worsened symptoms in 6% of patients. The intraoperative plantar skin temperature change and perioperative SSR demonstrated a correlation between these changes.

scholarly journals Assessing the impact of libraries – the role of ISO 16439

2018 ◽  
Vol 119 (1/2) ◽  
pp. 87-93 ◽  
Author(s):  
Claire Creaser
Keyword(s):  
Design Methodology ◽  
International Standards ◽  
Content Type ◽  
International Standard ◽  
The World ◽  
The Difference ◽  
Library Impact ◽  
The Impact

Purpose Library impact and how to evaluate it has been debated for a number of years. While the activity – the busy-ness – of the library is now routinely measured and described, the difference the library makes is less tangible and harder to measure. Libraries in all sectors and worldwide are grappling with this issue, and the purpose of this paper is to summarise international standards available to support them. Design/methodology/approach The first international standard concerning library impact, ISO 16439 Information and documentation – methods and procedures for assessing the impact of libraries, was published in 2014 after several years in development. Findings The standard describes a range of methods for assessing library impact which have been used across the world in a variety of libraries in all sectors. Originality/value This paper summarises the key methods described in the standard, and gives references for further reading.

Modeling and simulation of saturated double rotor induction machine

2018 ◽  
Vol 37 (3) ◽  
pp. 1139-1165
Author(s):  
Koosha Choobdari Omran ◽  
Ali Mosallanejad
Keyword(s):  
Temperature Effects ◽  
Power Efficiency ◽  
Reactive Power ◽  
Induction Machine ◽  
Transient Behavior ◽  
State Equations ◽  
Content Type ◽  
Proposed Model ◽  
The Difference ◽  
Park Transformation

Purpose Double rotor induction machine (DRIM) is a particular type of induction machine (IM) that has been introduced to improve the parameters of the conventional IM. The purpose of this study is to propose a dynamic model of the DRIM under saturated and unsaturated conditions by using the equations obtained in this paper. Also, skin and temperature effects are considered in this model. Design/methodology/approach First, the DRIM structure and its performance will be briefly reviewed. Then, to realize the DRIM model, the mathematical equations of the electrical and mechanical part of the DRIM will be presented by state equations in the q-d axis by using the Park transformation. In this paper, the magnetizing fluxes saturation is included in the DRIM model by considering the difference between the amplitudes of the unsaturated and saturated magnetizing fluxes. The skin and temperature effects are also considered in this model by correcting the rotor and stator resistances values during operation. Findings To evaluate the effects of the saturation and skin effects on DRIM performance and validate the model, the machine is simulated with/without consideration of saturation and skin effects by the proposed model. Then, the results, including torque, speed, stator and rotor currents, active and reactive power, efficiency, power factor and torque-speed characteristic, are compared. In addition, the performance of the DRIM has been investigated at different speed conditions and load variations. The proposed model is developed in Matlab/Simulink for the sake of validation. Originality/value This paper presents an understandable model of DRIM with and without saturation, which can be used to analyze the steady-state and transient behavior of the motor in different situations.

Chinese restaurant employees’ perceptions of their nationals abroad: a comparative study

2016 ◽  
Vol 10 (2) ◽  
pp. 205-222 ◽  
Author(s):  
Omar Moufakkir ◽  
Yvette Reisinger
Keyword(s):  
Cultural Diversity ◽  
Cultural Distance ◽  
Third Space ◽  
Service Encounter ◽  
Content Type ◽  
Chinese Restaurant ◽  
Cultural Proximity ◽  
Restaurant Employees ◽  
The Difference ◽  
Service Gap

Purpose This study aims to further an understanding of hospitality employees’ perceptions of their customers in the context of service encounter by utilizing the concepts of contact hypothesis and cultural distance in a multi-ethnic environment. The study compares perceptions of Chinese immigrants working in restaurants of their British patrons (from a remote culture) and Chinese patrons (from a proximate culture). The service encounter takes place in the London Chinatown. The dynamics of Chinatown as a “third space” adds complexity to service encounter and employee perceptions. Design/methodology/approach A self-administered questionnaire was distributed to 118 Chinese restaurant employees in the Soho area of the London Chinatown. Perception questions were based on interviews undertaken in an earlier phase of the research. A paired t-test was run to identify significant differences in the Chinese restaurant employees’ perceptions of the Chinese and British patrons. Discriminant analysis was performed to determine which perception variables discriminated the most between the two patron groups. Findings Despite cultural proximity, the perceptions held by Chinese restaurant employees of their nationals were negative compared to the perceptions of British patrons. Out of 16, in 15 areas of measurement, there were significant differences in the Chinese restaurant employees’ perceptions’ of their Chinese and British guests. Six variables that discriminated the most between the two groups of guests were no tips, not polite, loud, no compliment, messy and demanding. Research limitations/implications Research in ethnic and minority quarters, such as Chinatown in London, may suffer from “recall bias”, or in this case from making the difference between customer groups. Also, the Chinese are not a homogeneous group. For example, despite cultural similarity with mainstream culture, cultural and behavioral characteristics may exist between residents from the South, North and Hong Kong. Practical implications The cultural diversity of the industry’s employees necessitates managing cultural diversity effectively, especially in the sectors that rely heavily on guest–employee interaction. Perceptions affect attitudes and behavior. Training programs about perception and its roots may bridge the service gap in high-contact service encounters. Originality/value This study provides a ground for future empirical research into understanding the immigrant employees’ perceptions of their guests, nationals versus non-nationals and the ways for improving these perceptions. Taking the example of Chinatown as a dynamic “third space” is another approach to understanding the effects of “ethnoscape” on encounters in a more globalized village.

Sign in / Sign up

Export Citation Format

Share Document