Flexible biosensor using inkjet printing of silver nanoparticles

Sensor Review ◽  
2014 ◽  
Vol 34 (4) ◽  
pp. 360-366 ◽  
Author(s):  
Zahra Abadi ◽  
Vahid Mottaghitalab ◽  
Mansour Bidoki ◽  
Ali Benvidi
Keyword(s):  
Silver Nanoparticles ◽  
Inkjet Printing ◽  
Design Methodology ◽  
Electrochemical Sensors ◽  
Flexible Substrate ◽  
Paper Substrate ◽  
Content Type ◽  
Textile Fabrics ◽  
Textile Fabric

Purpose – The purpose of this paper is to present a sophisticated methodology for inkjet printing of silver nanoparticles (AgNPs) in the range of 80-200 nm on different flexible substrate. AgNPs was chemically deposited by ejection of silver nitrate and ascorbic acid solutions onto different substrates such as paper and textile fabrics. The fabricated pattern was used to employ as electrode for electrochemical sensors. Design/methodology/approach – The morphology of deposited AgNPs was characterized by means of scanning electron microscopy. Moreover, conductivity and electrochemical behavior were identified, respectively, using four probe and cyclic voltammetry techniques. Acquired image shows a well-defined shape and size for the deposited AgNP. Findings – The conductivity of the paper substrate after printing process reached 5.54 × 105 S/m. This printed electrode shows a sharp electrochemical response for early determination of glucose. The proposed electrode provides a new alternative to develop electrochemical sensors using AgNPs chemically deposited on paper and textile fabric surfaces.

scholarly journals Inkjet printing of silk: factors influencing ink penetration and ink spreading

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Saira Faisal ◽  
Muhammad Ali ◽  
Sheraz Hussain Siddique ◽  
Long Lin
Keyword(s):  
Inkjet Printing ◽  
Design Methodology ◽  
Marked Effect ◽  
Fractional Factorial ◽  
Printing Process ◽  
Content Type ◽  
Textile Fabrics ◽  
The Right

Purpose Pretreatment of fabric with a number of chemicals and auxiliaries is a prerequisite for inkjet printing. Owing to the rapidly increasing use of inkjet printing for textile fabrics, the study of the effects of process variables on various characteristics of the resulting print has drawn considerable interest recently. The purpose of this paper is to study the effects of different variables associated with the inkjet printing process on the quality of the resulting print. Specifically, the effects of chemicals and auxiliaries used in the pretreatment of the fabric prior to printing and factors such as steaming time were studies. Design/methodology/approach In the present study, which forms a part of a larger study by the authors, the influence of the nature of thickener, the amounts of thickener, urea and alkali, pH of the pretreatment liquor and the duration of steaming on ink penetration into the printed fabrics and the ink spreading across the fabrics was studied. The nature of ink penetration and ink spreading are known to have pronounced effects on the quality and, in turn, the overall appearance of the resulting print. A set of experiments based on a blocked 25–1 fractional factorial design with four centre points were conducted to evaluate the role of the aforementioned five variables. Ink penetration was quantified on the basis of the principles of Kebulka-Munk theory while ink spreading was analysed by image analysis. Findings Detailed statistical analyses of the experimental data obtained show that different thickeners perform differently and can have a marked influence on ink penetration and ink spreading. In the case of polyacrylic acid-based thickener, changing the levels of the factors has a marked effect on ink penetration and in-turn on ink spreading. In the case of polyacrylamide (PAM)-based thickener, on the other hand, the effect of changing the levels of various factors on the ink penetration and ink spreading is considerably less pronounced. In addition, PAM treated samples exhibited better performance in terms of ink penetration and spreading. Originality/value This study provides useful information for textile printers and highlights the importance of selecting the right type of thickener to make the printing process and the quality of the resulting print more predictable and controllable.

Locating complex eigenvalues for analytical eddy-current models used to detect flaws

2019 ◽  
Vol 38 (6) ◽  
pp. 1800-1809
Author(s):  
Grzegorz Tytko ◽  
Łukasz Dawidowski
Keyword(s):  
Eddy Current ◽  
Design Methodology ◽  
Complex Function ◽  
Precise Determination ◽  
Argument Principle ◽  
Content Type ◽  
Conductive Material ◽  
Complex Roots ◽  
Complex Eigenvalues

Purpose Discrete eigenvalues occur in eddy current problems in which the solution domain was truncated on its edge. In case of conductive material with a hole, the eigenvalues are complex numbers. Their computation consists of finding complex roots of a complex function that satisfies the electromagnetic interface conditions. The purpose of this paper is to present a method of computing complex eigenvalues that are roots of such a function. Design/methodology/approach The proposed approach involves precise determination of regions in which the roots are found and applying sets of initial points, as well as the Cauchy argument principle to calculate them. Findings The elaborated algorithm was implemented in Matlab and the obtained results were verified using Newton’s method and the fsolve procedure. Both in the case of magnetic and nonmagnetic materials, such a solution was the only one that did not skip any of the eigenvalues, obtaining the results in the shortest time. Originality/value The paper presents a new effective method of locating complex eigenvalues for analytical solutions of eddy current problems containing a conductive material with a hole.

Influence of sublimation process on air permeability and water absorption dynamics

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Brigita Kalendraite ◽  
Jolita Krisciunaite ◽  
Daiva Mikucioniene
Keyword(s):  
Water Absorption ◽  
Design Methodology ◽  
Air Permeability ◽  
Knitted Fabrics ◽  
Content Type ◽  
Sublimation Process ◽  
Textile Fabrics ◽  
High Temperature And Pressure ◽  
Before And After ◽  
Temperature And Pressure

PurposeThe purpose of this research was to find the influence of sublimation process on air permeability and water absorption dynamics of knitted and woven polyester-based fabrics.Design/methodology/approachThree different sublimation designs were prepared and applied (keeping the same sublimation parameters) for eight variants of knitted and four variants of woven polyester-based fabrics. Air permeability and water absorption dynamics during 180s period was measured and compared before and after the sublimation process.FindingsAccording to the obtained results, high temperature and pressure applied in sublimation process have influence on the porosity and air permeability of knitted fabrics; however, the influence on water absorption dynamics is minimal. Sublimation design dos not have any influence on the mentioned properties.Originality/valueThe obtained results of the sublimation process influence on air permeability and water absorption dynamics of knitted and woven polyester-based fabrics will help to understand how sublimation process can affect comfort properties of textile fabrics.

Causality in qualitative market and social research

2019 ◽  
Vol 22 (3) ◽  
pp. 405-413
Author(s):  
Clive Roland Boddy
Keyword(s):  
Qualitative Research ◽  
Design Methodology ◽  
Social Research ◽  
Pragmatic Approach ◽  
Social Phenomena ◽  
Content Type ◽  
The Past ◽  
The Moment ◽  
Practical Implications

Purpose Academic qualitative researchers have been criticized for rejecting the idea that their research can establish causality while market and social researchers, with their realist and pragmatic approach to research, take for granted that it can. This paper aims to explore the ability of qualitative research to determine cause and effect in terms of market and social phenomena. Design/methodology/approach The literature on causality in qualitative research is reviewed and discussed. The discussion is further informed by the author’s own experience of undertaking commercial and academic market and social qualitative research over the past 33 years. Findings In qualitative market and social research, the determination of causality is often needed but rarely discussed. This paper explores this occurrence and brings to the fore, via discussion and the use of example, the ways in which causality can be determined by qualitative research. Practical implications A determination of what events bring about predictable changes in social and market environments can be established via qualitative research particularly at a probabilistic level of causality. This implies that policymakers should give a greater emphasis to qualitative findings than then sometimes do at the moment. Originality/value Causality in market and social research is rarely discussed by practitioners but is nevertheless a premise of much of the qualitative research that is undertaken. This paper is therefore distinctive in that it examines whether this premise is justifiable.

Automated element grouping and self-stress identification of tensegrities

2015 ◽  
Vol 32 (6) ◽  
pp. 1643-1660 ◽  
Author(s):  
Kambiz Koohestani
Keyword(s):  
Design Methodology ◽  
Feasible Solution ◽  
State Of The Art ◽  
The Self ◽  
Content Type ◽  
Stress Mode ◽  
Novel Approach ◽  
Minimisation Problem ◽  
Feasible Solutions

Purpose – The determination of feasible self-stress modes and grouping of elements for tensegrities with predefined geometry and multiple self-stress modes is very important, though difficult, in the design of these structures. The purpose of this paper is to present a novel approach to the automated element grouping and self-stress identification of tensegrities. Design/methodology/approach – A set of feasible solutions conforming to the unilateral behaviour of elements is obtained through an optimisation process, which is solved using a genetic algorithm. Each chromosome in the population having a negative fitness is a distinctive feasible solution with its own grouping characteristic, which is automatically determined throughout the evolution process. Findings – The self-stress identification is formulated through an unconstrained minimisation problem. The objective function of this minimisation problem is defined in such a way that takes into account both the feasibility of a solution and grouping of elements. The method generates a set of feasible self-stress modes rather than a single one and automatically and simultaneously suggests a grouping of elements for every feasible self-stress mode. A self-stress mode with a minimal/subminimal grouping of elements is also obtained. Originality/value – The method can efficiently generate sets of feasible solutions rather than a single one. The authors also address one of the challenging issues related to this identification, i.e., automated grouping of elements. These features makes the method very efficient since most of the state-of-the-art methods address the self-stress identification of tensegrities based on predefined groupings of elements whilst providing only a single corresponding solution.

Profit-sharing investment accounts in islamic banks or mutualization, accounting perspective

2016 ◽  
Vol 14 (1) ◽  
pp. 30-48 ◽  
Author(s):  
Wasim K. AlShattarat ◽  
Muhannad A. Atmeh
Keyword(s):  
Financial Reporting ◽  
Mutual Fund ◽  
Design Methodology ◽  
Profit Sharing ◽  
Islamic Banks ◽  
Content Type ◽  
Implementation Challenges ◽  
Total Profit ◽  
Practical Implications

Purpose Islamic banks use Mudarabah contract to replace the interest-bearing deposits with profit-sharing investment accounts. The purpose of this paper is to explore the challenges and problems associated with the employment of Mudarabah contract by Islamic banks. Design/methodology/approach The study critically analyzes the Mudarabah contract used by Islamic banks. It reviews the evolution of the contract from its traditional type to more complicated types such as compound, unrestricted, commingled and continuous Mudarabah. The paper investigates the problems that have emerged from implementing such types in current business settings. Findings The paper proves that implementing the Mudarabah contract by banks imposes several problems among which are the following: difficulty in the determination of total profit resulting from Mudarabah and in allocating this profit to the multiple parties involved in Mudarabah; usage of reserves to cater against future losses may undermine the concept of Mudarabah profit-loss sharing and lead to earnings management; corporate governance is also a major problem in Mudarabah contract, as the depositors are exposed to risks but have no governance rights; and Mudarabah may also lessen the fair presentation of financial reporting. Research limitations/implications The paper examines the evolving Mudarabah contract and its implementation challenges, based on available literature (no empirical analysis was conducted). Practical implications The implications are significant for the future development of Islamic contracts and Islamic accounting treatments. Originality/value Many studies explored the Mudarabah contract from a Shariah or law perspective. However, this paper investigates the Mudarabah contract with a focus on the implication on accounting and financial reporting because of the lack of studies in this area. Furthermore, it demonstrates the persistent flaws in the Mudarabah contract, and it proposes a new model for mobilizing funds, i.e. mutual fund.

Evaluation of residual clearance after pre-joining and pre-joining scheme optimization in aircraft panel assembly

2016 ◽  
Vol 36 (4) ◽  
pp. 376-387 ◽  
Author(s):  
Di Yang ◽  
Weiwei Qu ◽  
Yinglin Ke
Keyword(s):  
Pareto Optimality ◽  
Design Methodology ◽  
Elastic Behavior ◽  
Assembly Model ◽  
Content Type ◽  
Scheme Optimization ◽  
Constrained Variation ◽  
Practical Implications ◽  
Excessive Number

Purpose For the automatic drilling and riveting in panel assembly, gaps between the skin and strangers are inevitable and undesirable. At present, the determination of pre-joining schemes relies on workers’ experience, introducing excessive number and inappropriate locations of pre-joining. This paper aims to present a new method for the evaluation of residual clearances after pre-joining and the pre-joining scheme optimization, providing operation guidance for the workers in panel assembly workshop. Design/methodology/approach In this paper, an equivalent gap assembly model for pre-joining is proposed on the basis of the mechanism of variation. This model retains the essential elastic behavior of the key features during the pre-joining operation and calculates the residual clearances in the view of the potential energy. Subsequently, this method is embedded into a Pareto optimality-based genetic algorithm, and the optimal pre-joining schemes are achieved with the consideration of the total residual clearances and the permissive tolerances. Findings The equivalent gap assembly model has the capability to predict an acceptable degree of accuracy of the residual clearances and achieve the optimized pre-joining schemes with less number of pre-joining at the same level of residual clearances. Practical implications The optimized pre-joining schemes are given in the form of Pareto optimality set, and workers can select suitable results according to their inclination to the quality and efficiency. Originality/value The paper is the first to propose the equivalent gap assembly model for the pre-joining operation, which provides for the simplification of the calculation of residual clearances based on the constrained variation principles.

Evaluation of corrosion inhibitors in acid medium

2015 ◽  
Vol 62 (4) ◽  
pp. 241-245
Author(s):  
Fernando Benedicto Mainier ◽  
Raphaela de Melo Baêsso e Silva
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibitor ◽  
Acid Medium ◽  
Design Methodology ◽  
Corrosion Inhibitors ◽  
Experimental Conditions ◽  
Content Type ◽  
Steel Pipes ◽  
Kinetics Of

Purpose – The purpose of this paper is to evaluate the corrosion inhibitor performance in acid medium through the determination of Fe2+ ions present based on reaction kinetics of steel with the acid. The use of corrosion inhibitors has been an excellent technique for protecting carbon steel pipes acidizing operations in oil wells. The inhibitor forms a chemical barrier on the metal surface that prevents or reduces attack by the acidic media. Design/methodology/approach – The experimental study provides a methodology to evaluate the performance of corrosion inhibitors in an acid medium, preferentially of concentrated hydrochloric acid. The process consists essentially of total immersion coupons of carbon steel, with continuous stirring, controlled temperature and quantitative determinations of iron ions from the dissolution of steel. The additions of commercial corrosion inhibitor base of ethoxylated amines of high molecular weight in an acid medium showed excellent performance at a temperature ranging from 25 to 45°C. Findings – This paper presents the mechanisms of protection, performance graphs and calculations of the activation energies of the addition of corrosion inhibitors in an acidic medium. Originality/value – The originality of this essay is to evaluate and correlate the performance of corrosion inhibitors with the activation energy in experimental conditions.

The phonological process of Rongga language from the phonemic into phonetic realization

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
I Nyoman Suparsa
Keyword(s):  
Data Analysis ◽  
Design Methodology ◽  
Additional Data ◽  
Primary Data ◽  
Phonological Process ◽  
Content Type ◽  
Monosyllabic Words ◽  
Written Materials ◽  
Phonetic Realization

PurposeThe current study aims firstly to explain the origin of the morphemic segments of Rongga language, either at the phonological or the phonetic level and the terms of the morphemic structure of Rongga, whether related to positive or if-then conditions. The second objective is to describe the phonological process of Rongga from the changing process of phonemic into phonetic realization.Design/methodology/approachAs far as the methodology is concerned, three methods are applied including (1) method of collecting data, (2) data analysis methods and (3) method of presenting the result of data analysis. The literary method is defined as a way of obtaining written materials that can support the primary data as additional data.FindingsThe findings of compression placement on Rongga reveal that firstly, the monosyllabic words, whether or not preceded by a consonant, whether or not preceded by a consonant stressed on a single syllable and whether or not preceded by a consonant or before the second syllable, both of which either precedes the consonant or do not follow a word boundary. Second, three and four monosyllabic words will be stressed on the last syllable if they precede the consonant or not.Originality/valueThe results are expected to be considered as one of the primary contributions to the determination of the orthographic system of Rongga, in particular, the consonant and unique vowel in Rongga.

Buckling capacity of cold-formed steel structure column member with perforation section in affordable house framing system

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Fatimah De'nan ◽  
Nor Salwani Hashim ◽  
Zafira Nur Ezzati Mustafa
Keyword(s):  
Design Methodology ◽  
Steel Structure ◽  
Construction Sector ◽  
Content Type ◽  
Circular Shape ◽  
Edge Distance ◽  
Cold Formed Steel ◽  
Wall Construction ◽  
Affordable House

Purpose The purpose of this study is to know the buckling capacity for cold-formed C-column with perforation. Cold-formed C-column have been used in interior wall construction. The concept of web perforation in the column has been introduced to the construction sector to overcome the issue of material cost. Design/methodology/approach Initially, the determination of the suitable spacing for the space column for the affordable house is investigated. Analysis house frame has been done in STAAD Pro. (Staad Pro, 2003) software using cold-formed C-column without perforation. Perforation with circular shape has been used in this study with the size of 0.4, 0.6 and 0.8 D (D = 180 mm). Perforation spacing is 150, 250 and 350 mm are adopted. Findings For the specimen with 0.4 D perforation and the edge distance is 539 mm have the highest buckling capacity (26.59 kN). Reduction of buckling capacity is 5.31% from cold-formed C-column without perforation and reduction of the volume is −2.16%. For the same case with 0.8 D perforation, the buckling capacity reduces with 22.52% and volume is −6.85%. Originality/value The conclusion of this analysis, C-column without perforation have higher buckling capacity compare to C-column with perforations.

Sign in / Sign up

Export Citation Format

Share Document