Differences Between Effective and Physical Roughness Parameter- A Headwater Mountain River Experiment

2021 ◽  
Author(s):  
Sebastian Cedillo ◽  
Luis Timbe ◽  
Esteban Sanchez-Cordero ◽  
Esteban Samaniego ◽  
Katherine Narea ◽  
...  
Keyword(s):  
Roughness Parameter ◽  
Mountain River

Plastic deformation of collector plates at electric motor repair

2020 ◽  
pp. 79-82
Author(s):  
D.YU. Belan ◽  
G.B. Toder ◽  
K.V. Averkov ◽  
YU.V. Titov
Keyword(s):  
Plastic Deformation ◽  
Electric Motor ◽  
Roughness Parameter ◽  
Surface Plastic Deformation ◽  
Analytical Dependence ◽  
Surface Plastic ◽  
Machined Surface ◽  
Tool Surface ◽  
Diamond Burnishing ◽  
Traction Electric Motor

A tool was developed for smoothing the plates of an electric motor collector. An analytical dependence of the roughness parameter of the machined surface on the force applied to the tool is obtained. Keywords traction electric motor, collector, diamond burnishing tool, surface-plastic deformation, repair, roughness. [email protected]

AFM and SEM Characterization of Chemically Modified Electrodes Based on 5-[(azulen-1-yl) methylene]-2-thioxothiazolidin-4-one

2018 ◽  
Vol 68 (12) ◽  
pp. 2799-2803
Author(s):  
Maria Daniela Pop ◽  
Oana Brincoveanu ◽  
Mihaela Cristea ◽  
George Octavian Buica ◽  
Marius Enachescu ◽  
...  
Keyword(s):  
Glassy Carbon ◽  
Roughness Parameter ◽  
Modified Electrodes ◽  
Chemically Modified Electrodes ◽  
Adhesion Properties ◽  
Chemically Modified ◽  
Controlled Potential ◽  
Constant Potential ◽  
Metal Ions Detection

Preparation and microscopy characterization of polymer modified glassy carbon electrodes based on (5-[(azulen-1-yl) methylene]-2-thioxothiazolidin-4-one (L) were reported. Atomic Force Microscopy was used to investigate the morphological and mechanical properties of the deposited polyL films onto glassy carbon. The topography images of the analyzed samples exhibited the presence of some columnar shape features onto the layer surfaces. The surface roughness of the layers deposited at constant charge calculated from topography images, increased with the more positive applied potential for controlled potential electrolysis. At different charges, the roughness parameter showed the same behavior for the layers obtained applying a constant potential without having a noticeable influence on the adhesion properties on the substrate. Analysis using scanning electron microscopy shows a relatively uniform surface arrangement of the polymer and the presence of some clusters which are disturbing the planarity. PolyL chemically modified electrodes have been used for heavy metal ions detection with best results for lead.

scholarly journals Insights on the Impacts of Hydroclimatic Extremes and Anthropogenic Activities on Sediment Yield of a River Basin

Earth ◽  
2021 ◽  
Vol 2 (1) ◽  
pp. 32-50
Author(s):  
Rocky Talchabhadel ◽  
Jeeban Panthi ◽  
Sanjib Sharma ◽  
Ganesh R. Ghimire ◽  
Rupesh Baniya ◽  
...  
Keyword(s):  
Suspended Sediment ◽  
River Basin ◽  
Extreme Precipitation ◽  
Suspended Sediment Concentration ◽  
Anthropogenic Activities ◽  
Sediment Concentration ◽  
Sediment Flux ◽  
Mountain River ◽  
Ecological Processes ◽  
Precipitation Indices

Streamflow and sediment flux variations in a mountain river basin directly affect the downstream biodiversity and ecological processes. Precipitation is expected to be one of the main drivers of these variations in the Himalayas. However, such relations have not been explored for the mountain river basin, Nepal. This paper explores the variation in streamflow and sediment flux from 2006 to 2019 in central Nepal’s Kali Gandaki River basin and correlates them to precipitation indices computed from 77 stations across the basin. Nine precipitation indices and four other ratio-based indices are used for comparison. Percentage contributions of maximum 1-day, consecutive 3-day, 5-day and 7-day precipitation to the annual precipitation provide information on the severity of precipitation extremeness. We found that maximum suspended sediment concentration had a significant positive correlation with the maximum consecutive 3-day precipitation. In contrast, average suspended sediment concentration had significant positive correlations with all ratio-based precipitation indices. The existing sediment erosion trend, driven by the amount, intensity, and frequency of extreme precipitation, demands urgency in sediment source management on the Nepal Himalaya’s mountain slopes. The increment in extreme sediment transports partially resulted from anthropogenic interventions, especially landslides triggered by poorly-constructed roads, and the changing nature of extreme precipitation driven by climate variability.

Wear behavior of polyamide 11 reinforced with titanate nanotubes

2021 ◽  
pp. 089270572110133
Author(s):  
Ayrton Alef Castanheira Pereira ◽  
José Roberto Moraes d’Almeida
Keyword(s):  
Wear Behavior ◽  
Roughness Parameter ◽  
Sodium Content ◽  
Titanate Nanotubes ◽  
Wear Performance ◽  
Polyamide 11 ◽  
High Sodium ◽  
Parameter Variations ◽  
Key Factor ◽  
Open Question

Besides polyamide 11 (PA 11) outstanding properties, wear performance is considered a key factor for its continued widespread use. TiTanate NanoTubes (TTNT) have a huge potential as reinforcement in polymer matrix nanocomposites, and although nanotubes reinforcement capacity is well understood, its effect on tribological characteristics is still an open question. Thus, the present work has as objective to study the wear behavior of PA 11 and its nanocomposites, highlighting TTNT loading, functionalization and sodium content effects. Seeking the possibility to tailor properties, surface topography is investigated. Based on parameter classification, correlation and functional sense, an ideal roughness parameter set is defined. By taking measurements in X- and Y-axis, parameter variations and sensibility are also analyzed. From the results, maximum wear resistance can be reached in functionalized samples with low TTNT loading and high sodium content. Some roughness parameters demonstrate a moderate to strong correlation with wear performance. Parameter variations are mainly attributed to the non-stationarity of the surface.

scholarly journals Influence of Relative Displacement on Surface Roughness in Longitudinal Turning of X37CrMoV5-1 Steel

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1317
Author(s):  
Michal Skrzyniarz ◽  
Lukasz Nowakowski ◽  
Edward Miko ◽  
Krzysztof Borkowski
Keyword(s):  
Surface Roughness ◽  
Standard Deviation ◽  
Surface Texture ◽  
Roughness Parameter ◽  
Relative Displacement ◽  
Edge Radius ◽  
Shaping Process ◽  
Feed Value ◽  
Longitudinal Turning ◽  
Final Effect

The shaping process of surface texture is complicated and depends on many factors and phenomena accompanying them. This article presents the author’s test stand for the measurement of relative displacements in a tool–workpiece system during longitudinal turning. The aim of this study was to determine the influence of edge radius on the relative displacement between the tool and workpiece. The cutting process was carried out with inserts with different edge radii for X37CrMoV5-1 steel. As a result of the research, vibration charts of the tool–workpiece system were obtained. In the range of feed 0.03–0.18 mm/rev, the values of the standard deviation of relative displacements in the x-axis were obtained in the range of 0.36–0.78 μm for the insert with an edge radius of rn = 48.8 μm. As a result of the work, it was determined that for the feed value of 0.12 mm/rev for all inserts, the relative displacements are the smallest. As the final effect, the formula for forecasting the Ra roughness parameter was presented.

scholarly journals Skewness and Kurtosis: Important Parameters in the Characterization of Dental Implant Surface Roughness—A Computer Simulation

2011 ◽  
Vol 2011 ◽  
pp. 1-6 ◽  
Author(s):  
Karl Niklas Hansson ◽  
Stig Hansson
Keyword(s):  
Surface Roughness ◽  
Shear Strength ◽  
Roughness Parameter ◽  
Interface Shear Strength ◽  
Interface Shear ◽  
Implant Surface ◽  
Bone Response ◽  
Dental Implant Surface ◽  
Skewness And Kurtosis

The surface roughness affects the bone response to dental implants. A primary aim of the roughness is to increase the bone-implant interface shear strength. Surface roughness is generally characterized by means of surface roughness parameters. It was demonstrated that the normally used parameters cannot discriminate between surfaces expected to give a high interface shear strength from surfaces expected to give a low interface shear strength. It was further demonstrated that the skewness parameter can do this discrimination. A problem with this parameter is that it is sensitive to isolated peaks and valleys. Another roughness parameter which on theoretical grounds can be supposed to give valuable information on the quality of a rough surface is kurtosis. This parameter is also sensitive to isolated peaks and valleys. An implant surface was assumed to have a fairly well-defined and homogenous “semiperiodic” surface roughness upon which isolated peaks were superimposed. In a computerized simulation, it was demonstrated that by using small sampling lengths during measurement, it should be possible to get accurate values of the skewness and kurtosis parameters.

Experimental Observation of Fractal-Regular Surfaces and a Transformation Scheme for Extracting Fractal Parameters

2005 ◽  
Author(s):  
Shao Wang ◽  
Wai Kin Chan
Keyword(s):  
Silicon Wafer ◽  
Roughness Parameter ◽  
Hard Disk ◽  
Spectral Density Function ◽  
Power Spectral ◽  
Fractal Parameters ◽  
Asperity Contacts ◽  
Fractal Roughness ◽  
Magnetic Hard Disk ◽  
Wafer Surfaces

To account for the effects of asperity contacts at various length scales, it is appropriate to characterize an engineering surface as a fractal-regular surface. In spite of significant theoretical advancement, there is a desperate need for experimental verification of the theory of fractal-regular surfaces and a consistent scheme of obtaining the fractal parameters. In the present study, the existence of a fractal region and a regular-shape region in the power spectral density function for fractal-regular surfaces was confirmed experimentally, for the first time, with data obtained from magnetic hard disk and silicon wafer surfaces. A novel scheme involving a variable transformation was developed to extract fractal parameters. This scheme was validated by accurate recovery of fractal parameters from simulated surfaces. The fractal dimension, the fractal roughness parameter and the fractal domain length were found for magnetic hard disk and silicon wafer surfaces.

Reach-scale channel geometry of a mountain river

2004 ◽  
Vol 29 (8) ◽  
pp. 969-981 ◽  
Author(s):  
Ellen Wohl ◽  
Jessica N. Kuzma ◽  
Nancy E. Brown
Keyword(s):  
Mountain River ◽  
Channel Geometry
Sign in / Sign up

Export Citation Format

Share Document