Generalized Gaussian kernel for triangular meshes denoising

2016 ◽  
Author(s):  
Hassan El Houari ◽  
Ahmed Fouad El Ouafdi
Keyword(s):  
Gaussian Kernel ◽  
Triangular Meshes

Helicopter main reduction planetary gear fault diagnosis method based on SVDD

2020 ◽  
Vol 64 (1-4) ◽  
pp. 137-145
Author(s):  
Yubin Xia ◽  
Dakai Liang ◽  
Guo Zheng ◽  
Jingling Wang ◽  
Jie Zeng
Keyword(s):  
Fault Diagnosis ◽  
Planetary Gear ◽  
Gaussian Kernel ◽  
Support Vector ◽  
Support Vector Data Description ◽  
Vector Data ◽  
Energy Characteristics ◽  
Gear Fault ◽  
Channel Information ◽  
Diagnosis Method

Aiming at the irregularity of the fault characteristics of the helicopter main reducer planetary gear, a fault diagnosis method based on support vector data description (SVDD) is proposed. The working condition of the helicopter is complex and changeable, and the fault characteristics of the planetary gear also show irregularity with the change of working conditions. It is impossible to diagnose the fault by the regularity of a single fault feature; so a method of SVDD based on Gaussian kernel function is used. By connecting the energy characteristics and fault characteristics of the helicopter main reducer running state signal and performing vector quantization, the planetary gear of the helicopter main reducer is characterized, and simultaneously couple the multi-channel information, which can accurately characterize the operational state of the planetary gear’s state.

Application of WMD Gaussian kernel in spectral partitioning

2008 ◽  
Vol 28 (7) ◽  
pp. 1738-1741 ◽  
Author(s):  
Ying-liang CHEN
Keyword(s):  
Gaussian Kernel ◽  
Spectral Partitioning

Automatic segmentation of medical images using a novel Harris Hawk optimization method and an active contour model

2021 ◽  
pp. 1-19
Author(s):  
Maria Tamoor ◽  
Irfan Younas
Keyword(s):  
Image Segmentation ◽  
Active Contour ◽  
Medical Image ◽  
Active Contour Model ◽  
Heart Diseases ◽  
Medical Image Segmentation ◽  
Gaussian Kernel ◽  
Initial Contour ◽  
Automated Method ◽  
Contour Model

Medical image segmentation is a key step to assist diagnosis of several diseases, and accuracy of a segmentation method is important for further treatments of different diseases. Different medical imaging modalities have different challenges such as intensity inhomogeneity, noise, low contrast, and ill-defined boundaries, which make automated segmentation a difficult task. To handle these issues, we propose a new fully automated method for medical image segmentation, which utilizes the advantages of thresholding and an active contour model. In this study, a Harris Hawks optimizer is applied to determine the optimal thresholding value, which is used to obtain the initial contour for segmentation. The obtained contour is further refined by using a spatially varying Gaussian kernel in the active contour model. The proposed method is then validated using a standard skin dataset (ISBI 2016), which consists of variable-sized lesions and different challenging artifacts, and a standard cardiac magnetic resonance dataset (ACDC, MICCAI 2017) with a wide spectrum of normal hearts, congenital heart diseases, and cardiac dysfunction. Experimental results show that the proposed method can effectively segment the region of interest and produce superior segmentation results for skin (overall Dice Score 0.90) and cardiac dataset (overall Dice Score 0.93), as compared to other state-of-the-art algorithms.

scholarly journals Paperboard Coating Detection Based on Full-Stokes Imaging Polarimetry

Sensors ◽  
2020 ◽  
Vol 21 (1) ◽  
pp. 208
Author(s):  
Javier Brugés Martelo ◽  
Jan Lundgren ◽  
Mattias Andersson
Keyword(s):  
Food Packaging ◽  
Imaging Systems ◽  
Gaussian Kernel ◽  
Support Vector ◽  
Camera System ◽  
Distance Correlation ◽  
Imaging Polarimetry ◽  
Packaging Industry ◽  
Thickness Variations

The manufacturing of high-quality extruded low-density polyethylene (PE) paperboard intended for the food packaging industry relies on manual, intrusive, and destructive off-line inspection by the process operators to assess the overall quality and functionality of the product. Defects such as cracks, pinholes, and local thickness variations in the coating can occur at any location in the reel, affecting the sealable property of the product. To detect these defects locally, imaging systems must discriminate between the substrate and the coating. We propose an active full-Stokes imaging polarimetry for the classification of the PE-coated paperboard and its substrate (before applying the PE coating) from industrially manufactured samples. The optical system is based on vertically polarized illumination and a novel full-Stokes imaging polarimetry camera system. From the various parameters obtained by polarimetry measurements, we propose implementing feature selection based on the distance correlation statistical method and, subsequently, the implementation of a support vector machine algorithm that uses a nonlinear Gaussian kernel function. Our implementation achieves 99.74% classification accuracy. An imaging polarimetry system with high spatial resolution and pixel-wise metrological characteristics to provide polarization information, capable of material classification, can be used for in-process control of manufacturing coated paperboard.

scholarly journals Classification of directionally specific vagus nerve activity using an upper airway obstruction model in anesthetized rodents

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
P. Sabetian ◽  
Y. Sadat-Nejad ◽  
Paul B. Yoo
Keyword(s):  
Airway Obstruction ◽  
Upper Airway ◽  
Low Noise ◽  
Upper Airway Obstruction ◽  
Gaussian Kernel ◽  
Recording Electrode ◽  
Cuff Electrode ◽  
Nerve Cuff ◽  
Svm Model ◽  
Nerve Cuff Electrode

AbstractElectrical signals from the peripheral nervous system have the potential to provide the necessary motor, sensory or autonomic information for implementing closed-loop control of neuroprosthetic or neuromodulatory systems. However, developing methods to recover information encoded in these signals is a significant challenge. Our goal was to test the feasibility of measuring physiologically generated nerve action potentials that can be classified as sensory or motor signals. A tetrapolar recording nerve cuff electrode was used to measure vagal nerve (VN) activity in a rodent model of upper airway obstruction. The effect of upper airway occlusions on VN activity related to respiration (RnP) was calculated and compared for 4 different cases: (1) intact VN, (2) VN transection only proximal to recording electrode, (3) VN transection only distal to the recording electrode, and (4) transection of VN proximal and distal to electrode. We employed a Support Vector Machine (SVM) model with Gaussian Kernel to learn a model capable of classifying efferent and afferent waveforms obtained from the tetrapolar electrode. In vivo results showed that the RnP values decreased significantly during obstruction by 91.7% ± 3.1%, and 78.2% ± 3.4% for cases of intact VN or proximal transection, respectively. In contrast, there were no significant changes for cases of VN transection at the distal end or both ends of the electrode. The SVM model yielded an 85.8% accuracy in distinguishing motor and sensory signals. The feasibility of measuring low-noise directionally-sensitive neural activity using a tetrapolar nerve cuff electrode along with the use of an SVM classifier was shown. Future experimental work in chronic implant studies is needed to support clinical translatability.

scholarly journals Multivariate SCADA Data Analysis Methods for Real-World Wind Turbine Power Curve Monitoring

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1105 ◽  
Author(s):  
Davide Astolfi ◽  
Francesco Castellani ◽  
Andrea Lombardi ◽  
Ludovico Terzi
Keyword(s):  
Standard Deviation ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Curve Analysis ◽  
Gaussian Kernel ◽  
Support Vector ◽  
Features Selection ◽  
Power Curve ◽  
Working Parameters ◽  
Extracted Power

Due to the stochastic nature of the source, wind turbines operate under non-stationary conditions and the extracted power depends non-trivially on ambient conditions and working parameters. It is therefore difficult to establish a normal behavior model for monitoring the performance of a wind turbine and the most employed approach is to be driven by data. The power curve of a wind turbine is the relation between the wind intensity and the extracted power and is widely employed for monitoring wind turbine performance. On the grounds of the above considerations, a recent trend regarding wind turbine power curve analysis consists of the incorporation of the main working parameters (as, for example, the rotor speed or the blade pitch) as input variables of a multivariate regression whose target is the power. In this study, a method for multivariate wind turbine power curve analysis is proposed: it is based on sequential features selection, which employs Support Vector Regression with Gaussian Kernel. One of the most innovative aspects of this study is that the set of possible covariates includes also minimum, maximum and standard deviation of the most important environmental and operational variables. Three test cases of practical interest are contemplated: a Senvion MM92, a Vestas V90 and a Vestas V117 wind turbines owned by the ENGIE Italia company. It is shown that the selection of the covariates depends remarkably on the wind turbine model and this aspect should therefore be taken in consideration in order to customize the data-driven monitoring of the power curve. The obtained error metrics are competitive and in general lower with respect to the state of the art in the literature. Furthermore, minimum, maximum and standard deviation of the main environmental and operation variables are abundantly selected by the feature selection algorithm: this result indicates that the richness of the measurement channels contained in wind turbine Supervisory Control And Data Acquisition (SCADA) data sets should be exploited for monitoring the performance as reliably as possible.

scholarly journals Research on a Rice Counting Algorithm Based on an Improved MCNN and a Density Map

Entropy ◽  
2021 ◽  
Vol 23 (6) ◽  
pp. 721
Author(s):  
Ao Feng ◽  
Hongxiang Li ◽  
Zixi Liu ◽  
Yuanjiang Luo ◽  
Haibo Pu ◽  
...  
Keyword(s):  
Grain Weight ◽  
Gaussian Kernel ◽  
Density Level ◽  
Thousand Grain Weight ◽  
Original Algorithm ◽  
Different Types ◽  
Different Shapes ◽  
Density Map ◽  
Important Basis ◽  
Adhesion Condition

The thousand grain weight is an index of size, fullness and quality in crop seed detection and is an important basis for field yield prediction. To detect the thousand grain weight of rice requires the accurate counting of rice. We collected a total of 5670 images of three different types of rice seeds with different qualities to construct a model. Considering the different shapes of different types of rice, this study used an adaptive Gaussian kernel to convolve with the rice coordinate function to obtain a more accurate density map, which was used as an important basis for determining the results of subsequent experiments. A Multi-Column Convolutional Neural Network was used to extract the features of different sizes of rice, and the features were fused by the fusion network to learn the mapping relationship from the original map features to the density map features. An advanced prior step was added to the original algorithm to estimate the density level of the image, which weakened the effect of the rice adhesion condition on the counting results. Extensive comparison experiments show that the proposed method is more accurate than the original MCNN algorithm.

Application of a kernel method with stably evaluated Gaussian kernel to problems on irregular domains

2021 ◽  
Author(s):  
Artur Krowiak ◽  
Renata Filipowska
Keyword(s):  
Kernel Method ◽  
Gaussian Kernel ◽  
Irregular Domains

scholarly journals Fuzzy Clustering Methods with Rényi Relative Entropy and Cluster Size

Mathematics ◽  
2021 ◽  
Vol 9 (12) ◽  
pp. 1423
Author(s):  
Javier Bonilla ◽  
Daniel Vélez ◽  
Javier Montero ◽  
J. Tinguaro Rodríguez
Keyword(s):  
Relative Entropy ◽  
Fuzzy Clustering ◽  
Cluster Size ◽  
Computational Study ◽  
Gaussian Kernel ◽  
Clustering Methods ◽  
Rényi Divergence ◽  
Divergence Measures ◽  
Fuzzy Clustering Methods ◽  
Rényi Relative Entropy

In the last two decades, information entropy measures have been relevantly applied in fuzzy clustering problems in order to regularize solutions by avoiding the formation of partitions with excessively overlapping clusters. Following this idea, relative entropy or divergence measures have been similarly applied, particularly to enable that kind of entropy-based regularization to also take into account, as well as interact with, cluster size variables. Particularly, since Rényi divergence generalizes several other divergence measures, its application in fuzzy clustering seems promising for devising more general and potentially more effective methods. However, previous works making use of either Rényi entropy or divergence in fuzzy clustering, respectively, have not considered cluster sizes (thus applying regularization in terms of entropy, not divergence) or employed divergence without a regularization purpose. Then, the main contribution of this work is the introduction of a new regularization term based on Rényi relative entropy between membership degrees and observation ratios per cluster to penalize overlapping solutions in fuzzy clustering analysis. Specifically, such Rényi divergence-based term is added to the variance-based Fuzzy C-means objective function when allowing cluster sizes. This then leads to the development of two new fuzzy clustering methods exhibiting Rényi divergence-based regularization, the second one extending the first by considering a Gaussian kernel metric instead of the Euclidean distance. Iterative expressions for these methods are derived through the explicit application of Lagrange multipliers. An interesting feature of these expressions is that the proposed methods seem to take advantage of a greater amount of information in the updating steps for membership degrees and observations ratios per cluster. Finally, an extensive computational study is presented showing the feasibility and comparatively good performance of the proposed methods.

Sign in / Sign up

Export Citation Format

Share Document