Intelligent control MPPT technique for PV module at varying atmospheric conditions using MATLAB/SIMULINK

2014 ◽  
Author(s):  
L. Zaghba ◽  
N. Terki ◽  
A. Borni ◽  
A. Bouchakour
Keyword(s):  
Intelligent Control ◽  
Atmospheric Conditions ◽  
Matlab Simulink ◽  
Pv Module

scholarly journals An Improved Matlab-Simulink Model of PV Module considering Ambient Conditions

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
R. Ayaz ◽  
I. Nakir ◽  
M. Tanrioven
Keyword(s):  
Thin Film ◽  
Polycrystalline Silicon ◽  
Meteorological Data ◽  
Atmospheric Conditions ◽  
Ambient Conditions ◽  
Matlab Simulink ◽  
Simulink Model ◽  
Pv Module ◽  
Proposed Model ◽  
Power Outputs

A photovoltaic (PV) model is proposed on Matlab/Simulink environment considering the real atmospheric conditions and this PV model is tested with different PV panels technologies (monocrystalline silicon, polycrystalline silicon, and thin film). The meteorological data of Istanbul—the location of the study—such as irradiance, cell temperature, and wind speed are taken into account in the proposed model for each technology. Eventually, the power outputs of the PV module under real atmospheric conditions are measured for resistive loading and these powers are compared with the results of proposed PV model. As a result of the comparison, it is shown that the proposed model is more compatible for monocrystal silicon and thin-film modules; however, it does not show a good correlation with polycrystalline silicon PV module.

scholarly journals Modeling and simulation of solar PV module for comparison of two MPPT algorithms (P&O & INC) in MATLAB/Simulink

2020 ◽  
Vol 18 (2) ◽  
pp. 666
Author(s):  
Hayder Moayad Abd Alhussain ◽  
Naseer Yasin
Keyword(s):  
Maximum Output Power ◽  
Maximum Power ◽  
Maximum Output ◽  
Atmospheric Conditions ◽  
Solar Pv ◽  
Maximum Power Point ◽  
Matlab Simulink ◽  
Point Tracking ◽  
Pv Module ◽  
Power Point

<p>This paper introduces a procedure for the modelling of a Photo<em>ــ</em>Voltaic (PV) cell and the application of maximum power point tracking (MPPT) in step-by-step with MATLAB/Simulink. The model of one diode is used to explore the characteristics of I<em>ــ</em>V and P<em>ــ</em>V curves of 60W PV module. Due to the non-linear and time varying of PV characteristics, the generated power of the PV is continually varying with atmospheric conditions like temperature and irradiation, the MPPT technology is very important to chase maximum power point (MPP) on the P<em>ــ</em>V curve to obtain maximum output power from PV array. This study focuses on two common types algorithms of MPPT, namely perturb and observe (P&amp;O) and incremental conductance (INC). A DC--DC boost converter is implemented to regulate the voltage output from the PV array's and for the application of MPPT algorithm.</p>

scholarly journals MPPT of PV System Under Partial Shading Conditions Based on Bio-inspired Swarm Intelligence Technique

2021 ◽  
Vol 297 ◽  
pp. 01051
Author(s):  
Mohammed Agdam ◽  
Abdallah Asbayou ◽  
Mustapha Elyaqouti ◽  
Ahmed Ihlal ◽  
Khaled Assalaou
Keyword(s):  
Swarm Intelligence ◽  
Electrical Energy ◽  
Pv System ◽  
Partial Shading ◽  
Matlab Simulink ◽  
Photovoltaic Modules ◽  
Pv Module ◽  
Maximum Current ◽  
Maximum Voltage ◽  
Intelligence Technique

To respond to the increase in demand for electricity, the use of photovoltaics is growing considerably as it produces electrical energy without polluting the environment. In addition, to enhance the efficiency of photovoltaic modules, an MPPT algorithm is required to follow the maximum voltage and maximum current in the IV curve. This technique can be achieved by using a DC-DC converter. For this purpose, various MPPT techniques have been developed. The combination of MPPT and DC-DC converter is implemented using Matlab/Simulink and connected to a modelled PV module to validate the simulation.

Intelligent Control of Compact Multiphase Separation System (CMSS©)—Part I: Modeling and Simulation

2009 ◽  
Author(s):  
V. Sampath ◽  
R. Mohan ◽  
S. Wang ◽  
L. Gomez ◽  
O. Shoham ◽  
...  
Keyword(s):  
Control System ◽  
Modeling And Simulation ◽  
Intelligent Control ◽  
Dynamic Models ◽  
Free Water ◽  
Integrated System ◽  
Separation System ◽  
Matlab Simulink ◽  
Knock Out ◽  
Cylindrical Cyclone

Performance of compact separators depends on implementation of stable and robust control strategies that are suited for specific applications. In this investigation, an intelligent control system has been developed for Compact Multiphase Separation System (CMSS©) which consists of integrated configurations of three compact separators, namely, Gas-Liquid Cylindrical Cyclone (GLCC©), Liquid-Liquid Cylindrical Cyclone (LLCC©) and Liquid-Liquid Hydrocyclone (LLHC). This is a two-part paper, the first part (current paper) deals with the Modeling and Simulation of the CMSS© and the second part deals with Experimental Investigation. The specific objective of this CMSS© configuration is to knock out free water from the upstream fluids. In mature oil fields, water handling poses a huge problem. Thus water knock out at the earliest stage helps in significant cost savings. A novel fuzzy logic control system has been designed and tested for change in set-point of differential pressure ratio in LLHC. Dynamic models have been developed for each of the above mentioned control systems for design of stable PID parameters. A dynamic simulation platform (DSP) has been developed based on these models in Matlab/Simulink™ for predicting the transient performance of the integrated system. Steady state mechanistic models of individual devices are integrated to the Matlab/Simulink™ platform using look up tables to predict the overall response of the CMSS© for different scenarios.

Modelling and Simulation of Solar Photovoltaic Cell for Different Insolation Values Based on MATLAB/Simulink Environment

2014 ◽  
Vol 550 ◽  
pp. 137-143 ◽  
Author(s):  
S. Narendiran ◽  
Sarat Kumar Sahoo
Keyword(s):  
Photovoltaic Cell ◽  
Photovoltaic Module ◽  
Solar Photovoltaic ◽  
Electrical Characteristics ◽  
Array Type ◽  
Matlab Simulink ◽  
Photovoltaic Modules ◽  
Pv Module ◽  
Current Input ◽  
In Series

The paper discuss about the modelling and electrical characteristics of photovoltaic cell and its array type of construction in matlab-simulink environment at different insolation levels. The photovoltaic module is modelled using the diode electrical characteristic equation. The photovoltaic cell is analysed by voltage input and current input modules, The voltage and current input photovoltaic modules are simulated with different insolation values by varying the construction of PV modules. The results conclude that the current input PV module is well suited for applications were it shares same current when connected in series and voltage input PV module, where it shares same voltage when connected in parallel.

scholarly journals Comparative study with practical validation of photovoltaic monocrystalline module for single and double diode models

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Salam J. Yaqoob ◽  
Ameer L. Saleh ◽  
Saad Motahhir ◽  
Ephraim B. Agyekum ◽  
Anand Nayyar ◽  
...  
Keyword(s):  
Weather Conditions ◽  
Electrical Energy ◽  
Variable Load ◽  
Simple Method ◽  
Simple Modification ◽  
Matlab Simulink ◽  
Pv Panel ◽  
Pv Module ◽  
Internal Parameters ◽  
Good Agreement

AbstractA photovoltaic (PV) module is an equipment that converts solar energy to electrical energy. A mathematical model should be presented to show the behavior of this device. The well-known single-diode and double-diode models are utilized to demonstrate the electrical behavior of the PV module. “Matlab/Simulink” is used to model and simulate the PV models because it is considered a major software for modeling, analyzing, and solving dynamic system real problems. In this work, a new modeling method based on the “Multiplexer and Functions blocks” in the "Matlab/Simulink Library" is presented. The mathematical analysis of single and double diodes is conducted on the basis of their equivalent circuits with simple modification. The corresponding equations are built in Matlab by using the proposed method. The unknown internal parameters of the PV panel circuit are extracted by using the PV array tool in Simulink, which is a simple method to obtain the PV parameters at certain weather conditions. Double-diode model results are compared with the single-diode model under various irradiances and temperatures to verify the performance and accuracy of the proposed method. The proposed method shows good agreement in terms of the I–V and P–V characteristics. A monocrystalline NST-120 W PV module is used to validate the proposed method. This module is connected to a variable load and tested for one summer day. The experimental voltage, current, and power are obtained under various irradiances and temperatures, and the I–V and P–V characteristics are obtained.

scholarly journals Robot Extenics Control Developed by Versatile, Intelligent and Portable Robot Vipro Platform Applied on Firefighting Robots

2020 ◽  
Vol 16 (08) ◽  
pp. 99
Author(s):  
L Vladareanu ◽  
V. Vlădareanu ◽  
N. Pop ◽  
M. Migdalovici ◽  
M. Boșcoianu ◽  
...  
Keyword(s):  
Intelligent Control ◽  
Robot Control ◽  
Control Method ◽  
Dc Motor ◽  
Programming Environment ◽  
Matlab Simulink ◽  
Platform Architecture ◽  
Control Interface ◽  
Improved Performance ◽  
Universe Of Discourse

<p>The firefighting robot control using intelligent Extenics control interfaces ICEx developed by versatile, intelligent and portable robot VIPRO platform is presented. Subsequently, VIPRO platform architecture, the innovative versatile, intelligent, portable platform, is applied on firefighting robots VIP- FiR&amp;FiTRo, Extenics intelligent control and Universe of Discourse in an Extenics Transformation are detailed.  The Extenics Control Method with Fuzzy Smoothing is developed and tested using a simple DC motor configuration in the Matlab / Simulink programming environment. A sequence for the Intelligent Control Interface Code integrated into the VIPRO is presented. The results prove the possibilities for tweaking and optimizing by intelligent Extenics control developed on VIPRO platform in order to obtain improved performance are virtually limitless.</p>

Sign in / Sign up

Export Citation Format

Share Document