Inorganic electrolytes present in the process water used during froth flotation may have both beneficial and detrimental effects. These effects are said to be ion specific, as some ions may result in enhanced froth stability, increased mineral recoveries and decreased concentrate grades, while others may bring the opposite effects. Onsite process water quality variations have intensified the need to understand the relationship between inorganic electrolytes and flotation reagents on flotation performance. The use of mixtures of thiol collectors in sulfide flotation is a common practice across the globe; however, very few investigations have considered these in process waters of varying compositions. This study considers the effect of common cations, Na+ and Ca2+, in process water on the behavior of mixtures of thiol collectors. Single-salt solutions of NaCl and CaCl2 at an ionic strength of 0.0213 mol·dm−3 were used to investigate the behavior of mixtures of two thiol collectors. These were carefully selected to understand how mixtures of thiol collectors behave in the presence of a monovalent cation versus a polyvalent cation. Bench-scale froth flotation tests were conducted using a Cu-Ni-PGM ore from the Merensky Reef. The results have shown that the divalent cation, Ca2+, resulted in higher %Cu and %Ni recoveries at all collector mixtures compared to the monovalent cation, Na+. The concentrate grades were, however, slightly compromised, as slightly more gangue reported to the concentrate in the presence of Ca2+. This behavior is attributed to the effect of polyvalent cations on bubble coalescence and froth stability.
Ion effects in future circular and linear accelerators
