A Screw Theory-Based Semi-Analytical Approach for Elastodynamics of the Tricept Robot

2019 ◽  
Vol 11 (3) ◽  
Author(s):  
Chenglin Dong ◽  
Haitao Liu ◽  
Tian Huang ◽  
Derek G. Chetwynd
Keyword(s):  
Lower Order ◽  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Analytical Approach ◽  
Screw Theory ◽  
Mode Shapes ◽  
Fe Model ◽  
Six Degrees Of Freedom ◽  
Static Condensation ◽  
Elastodynamic Modeling

Taking the well-known Tricept robot as an example, this paper presents a semi-analytical approach for elastodynamic modeling of five or six degrees of freedom (DOF) hybrid robots composed of a 3-DOF parallel mechanism plus a 2- or 3-DOF wrist. Drawing heavily on screw theory combined with structural dynamics, the kinetic and elastic potential energies of the parallel mechanism and of the wrist are formulated using the dual properties of twist/wrench systems and a static condensation technique. This results in a 9-DOF dynamic model that enables the lower-order dynamic behavior over the entire workspace to be estimated in a very efficient and accurate manner. The lower-order natural frequencies and mode shapes estimated by the proposed approach are shown to have very good agreement with those obtained by a full-order finite element (FE) model. It thus provides a very time-effective tool for optimal design within a virtual prototyping framework for hybrid robot-based machine tools.

Motion/Force Transmission Analysis of Parallel Mechanisms With Planar Closed-Loop Subchains

2016 ◽  
Vol 138 (6) ◽  
Author(s):  
Kristan Marlow ◽  
Mats Isaksson ◽  
Jian S. Dai ◽  
Saeid Nahavandi
Keyword(s):  
Performance Measures ◽  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Closed Loop ◽  
Screw Theory ◽  
Parallel Mechanisms ◽  
Force Transmission ◽  
Six Degrees Of Freedom ◽  
Lower Mobility ◽  
Transmission Ability

Singularities are one of the most important issues affecting the performance of parallel mechanisms. A parallel mechanism with less than six degrees of freedom (6DOF) is classed as having lower mobility. In addition to input–output singularities, such mechanisms potentially suffer from singularities among their constraints. Furthermore, the utilization of closed-loop subchains (CLSCs) may introduce additional singularities, which can strongly affect the motion/force transmission ability of the entire mechanism. In this paper, we propose a technique for the analysis of singularities occurring within planar CLSCs, along with a finite, dimensionless, frame invariant index, based on screw theory, for examining the closeness to these singularities. The integration of the proposed index with existing performance measures is discussed in detail and exemplified on a prototype industrial parallel mechanism.

Singularity Analysis of Large Workspace 3RRRS Parallel Mechanism Using Line Geometry and Linear Complex Approximation

2010 ◽  
Vol 3 (1) ◽  
Author(s):  
Alon Wolf ◽  
Daniel Glozman
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Singularity Analysis ◽  
Community Research ◽  
Parallel Mechanisms ◽  
Line Geometry ◽  
Equilibrium Equations ◽  
Six Degrees Of Freedom ◽  
Singular Configurations

During the last 15 years, parallel mechanisms (robots) have become more and more popular among the robotics and mechanism community. Research done in this field revealed the significant advantage of these mechanisms for several specific tasks, such as those that require high rigidity, low inertia of the mechanism, and/or high accuracy. Consequently, parallel mechanisms have been widely investigated in the last few years. There are tens of proposed structures for parallel mechanisms, with some capable of six degrees of freedom and some less (normally three degrees of freedom). One of the major drawbacks of parallel mechanisms is their relatively limited workspace and their behavior near or at singular configurations. In this paper, we analyze the kinematics of a new architecture for a six degrees of freedom parallel mechanism composed of three identical kinematic limbs: revolute-revolute-revolute-spherical. We solve the inverse and show the forward kinematics of the mechanism and then use the screw theory to develop the Jacobian matrix of the manipulator. We demonstrate how to use screw and line geometry tools for the singularity analysis of the mechanism. Both Jacobian matrices developed by using screw theory and static equilibrium equations are similar. Forward and inverse kinematic solutions are given and solved, and the singularity map of the mechanism was generated. We then demonstrate and analyze three representative singular configurations of the mechanism. Finally, we generate the singularity-free workspace of the mechanism.

scholarly journals Modal testing and modelling the dynamic characteristics of a plate with bolted joints

2021 ◽  
Vol 15 (4) ◽  
pp. 8555-8564
Author(s):  
A.R. Bahari ◽  
M. A. Yunus ◽  
M.N. Abdul Rani ◽  
A.A. Prakasam
Keyword(s):  
Thin Plate ◽  
Dynamic Characteristics ◽  
Degrees Of Freedom ◽  
Normal Modes ◽  
Bolted Joints ◽  
Modal Testing ◽  
Mode Shapes ◽  
Fe Model ◽  
Six Degrees Of Freedom ◽  
Alternative Approach

Modelling the dynamic characteristics of the bolted joints in a complex assembled structure with a high accuracy is very challenging due to the assumptions and uncertainties in the input data of the FE model. In this paper, the identification of the dynamic characteristics of the bolted joints structure using the CBUSH element connector is proposed. Modal testing and normal modes analysis are conducted on a thin plate assembled structure with bolted joints. In the simulation work, the CBUSH element connector is employed and the stiffness coefficient for six degrees of freedom is computed based on four flexibility formulae. The predicted natural frequencies and their corresponding mode shapes are compared against the results of the experimental work. A good agreement of the FE model is achieved by using the coefficient of stiffness as represented in the Swift flexibility formula. The study justifies that the dynamic characteristics of the bolt joints could be accurately modelled by using the CBUSH element connector. The obtained findings provided an alternative approach to modelling the dynamic characteristics of a thin plate assembled structure with bolted joints.

Unified Rotational and Translational Stiffness Characterization of Compliant Shell Mechanisms

2018 ◽  
Author(s):  
Joost R. Leemans ◽  
Charles J. Kim ◽  
Werner W. P. J. van de Sande ◽  
Just L. Herder
Keyword(s):  
Degrees Of Freedom ◽  
Compliant Mechanisms ◽  
Screw Theory ◽  
Characterization Methods ◽  
Six Degrees Of Freedom ◽  
Thin Walled Structures ◽  
Spatial Mechanisms ◽  
Eigen Decomposition ◽  
Comprehensive Characterization

Compliant shell mechanisms utilize spatially curved thin-walled structures to transfer or transmit force, motion or energy through elastic deformation. To design with spatial mechanisms designers need comprehensive characterization methods, while existing methods fall short of meaningful comparisons between rotational and translational degrees of freedom. This paper presents two approaches, both of which are based on the principle of virtual loads and potential energy, utilizing properties of screw theory, Plücker coordinates and an eigen-decomposition, leading to two unification lengths that can be used to compare and visualize all six degrees of freedom directions and magnitudes of compliant mechanisms in a non-arbitrary physically meaningful manner.

A 2(3-RRPS) parallel manipulator inspired by Gough–Stewart platform

Robotica ◽  
2012 ◽  
Vol 31 (3) ◽  
pp. 381-388 ◽  
Author(s):  
Jaime Gallardo-Alvarado ◽  
Mario A. García-Murillo ◽  
Eduardo Castillo-Castaneda
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Parallel Manipulators ◽  
Forward Kinematics ◽  
Triangular Prism ◽  
Input Output ◽  
Six Degrees Of Freedom ◽  
Moving Platform

SUMMARYThis study addresses the kinematics of a six-degrees-of-freedom parallel manipulator whose moving platform is a regular triangular prism. The moving and fixed platforms are connected to each other by means of two identical parallel manipulators. Simple forward kinematics and reduced singular regions are the main benefits offered by the proposed parallel manipulator. The Input–Output equations of velocity and acceleration are systematically obtained by resorting to reciprocal-screw theory. A case study, which is verified with the aid of commercially available software, is included with the purpose to exemplify the application of the method of kinematic analysis.

Output-Only Modal Analysis of an Internal Unreachable Module Embedded in a Space Electronic Equipment

2012 ◽  
Author(s):  
Lassaad Ben Fekih ◽  
Georges Kouroussis ◽  
David Wattiaux ◽  
Olivier Verlinden ◽  
Christophe De Fruytier
Keyword(s):  
Finite Element ◽  
Modal Analysis ◽  
Degrees Of Freedom ◽  
Transverse Direction ◽  
Mode Shapes ◽  
Fe Model ◽  
Fe Method ◽  
Numeric Model ◽  
Stiffness Matrices ◽  
Output Only

An approach is proposed to identify the modal properties of a subsystem made up of an arbitrary chosen inner module of embedded space equipment. An experimental modal analysis was carried out along the equipment transverse direction with references taken onto its outer housing. In parallel, a numerical model using the finite element (FE) method was developed to correlate with the measured results. A static Guyan reduction has led to a set of master degrees of freedom in which the experimental mode shapes were expanded. An updating technique consisting in minimizing the dynamic residual induced by the FE model and the measurements has been investigated. A last verification has consisted in solving the numeric model composed of the new mass and stiffness matrices obtained by means of a minimization of the error in the constitutive equation method.

General inverse solution of six-degrees-of-freedom serial robots based on the product of exponentials model

2018 ◽  
Vol 38 (3) ◽  
pp. 361-367 ◽  
Author(s):  
Haixia Wang ◽  
Xiao Lu ◽  
Wei Cui ◽  
Zhiguo Zhang ◽  
Yuxia Li ◽  
...  
Keyword(s):  
Design Methodology ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Complex Problem ◽  
Content Type ◽  
Geometrical Properties ◽  
Closed Form Solutions ◽  
Six Degrees Of Freedom ◽  
Serial Robots ◽  
Six Dof

Purpose Developing general closed-form solutions for six-degrees-of-freedom (DOF) serial robots is a significant challenge. This paper thus aims to present a general solution for six-DOF robots based on the product of exponentials model, which adapts to a class of robots satisfying the Pieper criterion with two parallel or intersecting axes among its first three axes. Design/methodology/approach The proposed solution can be represented as uniform expressions by using geometrical properties and a modified Paden–Kahan sub-problem, which mainly adopts the screw theory. Findings A simulation and experiments validated the correctness and effectiveness of the proposed method (general resolution for six-DOF robots based on the product of exponentials model). Originality/value The Rodrigues rotation formula is additionally used to turn the complex problem into a solvable trigonometric function and uniformly express six solutions using two formulas.

Sign in / Sign up

Export Citation Format

Share Document