Augmented Reality Brings the Real World into Natural History Dioramas with Data Visualizations and Bioacoustics at the Carnegie Museum of Natural History

Color appearance models have been extensively studied for characterizing and predicting the perceived color appearance of physical color stimuli under different viewing conditions. These stimuli are either surface colors reflecting illumination or self-luminous emitting radiations. With the rapid development of augmented reality (AR) and mixed reality (MR), it is critically important to understand how the color appearance of the objects that are produced by AR and MR are perceived, especially when these objects are overlaid on the real world. In this study, nine lighting conditions, with different correlated color temperature (CCT) levels and light levels, were created in a real-world environment. Under each lighting condition, human observers adjusted the color appearance of a virtual stimulus, which was overlaid on a real-world luminous environment, until it appeared the whitest. It was found that the CCT and light level of the real-world environment significantly affected the color appearance of the white stimulus, especially when the light level was high. Moreover, a lower degree of chromatic adaptation was found for viewing the virtual stimulus that was overlaid on the real world.

Download Full-text

Augmented Reality Berbasis Android Sebagai Media Pembelajaran Sistem Tata Surya

Jurnal CoSciTech (Computer Science and Information Technology) ◽

10.37859/coscitech.v2i1.2178 ◽

2021 ◽

Vol 2 (1) ◽

pp. 53-59

Author(s):

Yulia Fatma ◽

Armen Salim ◽

Regiolina Hayami

Keyword(s):

Augmented Reality ◽

Solar System ◽

Real Time ◽

Real World ◽

Virtual World ◽

The Real ◽

Virtual Objects ◽

Augmented Reality Technology ◽

The Revolution

Along with the development, the application can be used as a medium for learning. Augmented Reality is a technology that combines two-dimensional’s virtual objects and three-dimensional’s virtual objects into a real three-dimensional’s then projecting the virtual objects in real time and simultaneously. The introduction of Solar System’s material, students are invited to get to know the planets which are directly encourage students to imagine circumtances in the Solar System. Explenational of planets form and how the planets make the revolution and rotation in books are considered less material’s explanation because its only display objects in 2D. In addition, students can not practice directly in preparing the layout of the planets in the Solar System. By applying Augmented Reality Technology, information’s learning delivery can be clarified, because in these applications are combined the real world and the virtual world. Not only display the material, the application also display images of planets in 3D animation’s objects with audio.

Download Full-text

Real-Life Continuous Flash Suppression - Rendering The Real World Unconscious Using Augmented Reality Goggles

10.31234/osf.io/y3fcz ◽

2018 ◽

Author(s):

Uri Korisky ◽

Rony Hirschhorn ◽

Liad Mudrik

Keyword(s):

Augmented Reality ◽

Real World ◽

Three Dimensional ◽

Real Life ◽

Continuous Flash Suppression ◽

Future Studies ◽

The Real ◽

Dominant Eye ◽

Novel Variant ◽

Real Objects

Notice: a peer-reviewed version of this preprint has been published in Behavior Research Methods and is available freely at http://link.springer.com/article/10.3758/s13428-018-1162-0Continuous Flash Suppression (CFS) is a popular method for suppressing visual stimuli from awareness for relatively long periods. Thus far, it has only been used for suppressing two-dimensional images presented on-screen. We present a novel variant of CFS, termed ‘real-life CFS’, with which the actual immediate surroundings of an observer – including three-dimensional, real life objects – can be rendered unconscious. Real-life CFS uses augmented reality goggles to present subjects with CFS masks to their dominant eye, leaving their non-dominant eye exposed to the real world. In three experiments we demonstrate that real objects can indeed be suppressed from awareness using real-life CFS, and that duration suppression is comparable that obtained using the classic, on-screen CFS. We further provide an example for an experimental code, which can be modified for future studies using ‘real-life CFS’. This opens the gate for new questions in the study of consciousness and its functions.

Download Full-text

Virtually Enhancing the Real World with Augmented Reality Holograms: Use and Gratification Perspective: An Abstract

Back to the Future: Using Marketing Basics to Provide Customer Value - Developments in Marketing Science: Proceedings of the Academy of Marketing Science ◽

10.1007/978-3-319-66023-3_204 ◽

2017 ◽

pp. 623-623

Author(s):

Philipp A. Rauschnabel ◽

Nina Krey

Keyword(s):

Augmented Reality ◽

Real World ◽

The Real

Download Full-text

Development of Augmented Reality (AR) Based Trompong

JELIKU (Jurnal Elektronik Ilmu Komputer Udayana) ◽

10.24843/jlk.2021.v09.i03.p04 ◽

2021 ◽

Vol 9 (3) ◽

pp. 339

Author(s):

Gede Bagus Danandjaya ◽

I Gede Arta Wibawa

Keyword(s):

Augmented Reality ◽

Real World ◽

Traditional Music ◽

The Real ◽

3 Dimensional ◽

Unity 3D ◽

Balinese Gamelan ◽

Augmented Reality Application ◽

3D Software

In gamelan, one of the most important instruments is trompong. Trompong is an idiphones instrument that has 10 rows of round shaped metal called pencon. Every pencon has its own sound. As a traditional music instrument, of course gamelan especialy trompong must be preserved continuously. But unfortunately, playing Balinese gamelan with real instrument is hard to do because the difficulty to finding gamelan in the real world. By using technolgy such as Augmented Reality, playing trompong possible to do even without having the real instrument. Augmented Reality will be develop using Unity 3D software along with Vuforia SDK, and also this application using Android smartphone as a base of Augmented Reality application. This Augmented Reality application called TrompongAR and will be marker based Augmented Reality, by using a target marker will help Augmented Reality to place where the 3-dimensional trompong will placed. The 3-dimensional trompong will have 10 pencon that can played by tapping the pencon, the touched pencon will produce sound like the real instrument.

Download Full-text

Augmented Reality and Experiences

Smart Marketing With the Internet of Things - Advances in Marketing, Customer Relationship Management, and E-Services ◽

10.4018/978-1-5225-5763-0.ch004 ◽

2019 ◽

pp. 66-93 ◽

Cited By ~ 1

Author(s):

Prabha Selvaraj ◽

Sumathi Doraikannan ◽

Anantha Raman Rathinam ◽

Balachandrudu K. E.

Keyword(s):

Augmented Reality ◽

Real World ◽

New Technology ◽

Handheld Devices ◽

The Real ◽

The World ◽

Extensive Range ◽

Different Types ◽

Medicine Education

Today technology evolves in two different directions. The first one is to create a new technology for our requirement and solve the problem, and the second one is to do it with the existing technology. This chapter will discuss in detail augmented reality and its use in the real world and also its application domains like medicine, education, health, gaming, tourism, film and entertainment, architecture, and development. Many think that AR is only for smartphones, but there are different ways to enhance the insight of the world. Augmented realities can be presented on an extensive range of displays, monitors, screens, handheld devices, or glasses. This chapter will provide the information about the key components of AR devices. This chapter gives a view on different types of AR and also projects how the technology can be adapted for multiple purposes based on the required type of view.

Download Full-text

Technology-Supported Tourist Guiding in Aviation Tourism

Cases on Tour Guide Practices for Alternative Tourism - Advances in Hospitality, Tourism, and the Services Industry ◽

10.4018/978-1-7998-3725-1.ch014 ◽

2020 ◽

pp. 257-267

Author(s):

Azizul Hassan

Keyword(s):

Augmented Reality ◽

Diffusion Of Innovation ◽

Real World ◽

Perceptual Information ◽

The Internet ◽

Diffusion Of Innovation Theory ◽

The Real ◽

National Flag ◽

Interactive Experience ◽

World Environment

Augmented reality (AR) offers an interactive experience of the real-world environment when an object of the real-world is augmented by computer-generated perceptual information and relevant artefacts. This is a conceptual chapter based on the review of available literature. Also, resources on the internet have also been accessed and reviewed. On the context of the Diffusion of Innovation theory, this research aims to outline AR guiding for in an airport used for tourist aviation. Biman Bangladesh Airlines, the national flag carrier of the country, is the example where this study also explains the possible challenges and benefits that AR guiding facilities can possibly have. This research outlines two specific areas of management and marketing issues are analysis on the way to implement such guiding. Findings show that from the understanding of the Diffusion of Innovation, AR guiding in these days is adopted by an ‘Early Majority' who are followers and engages in reading those reviews given by the previous adopters of new services or products.

Download Full-text

A Survey of Marker-Less Tracking and Registration Techniques for Health & Environmental Applications to Augmented Reality and Ubiquitous Geospatial Information Systems

Sensors ◽

10.3390/s20102997 ◽

2020 ◽

Vol 20 (10) ◽

pp. 2997 ◽

Cited By ~ 1

Author(s):

Abolghasem Sadeghi-Niaraki ◽

Soo-Mi Choi

Keyword(s):

Information Systems ◽

Augmented Reality ◽

Real World ◽

Spatial Data ◽

Environmental Applications ◽

Geospatial Information ◽

Environmental Application ◽

The Real ◽

Advantages And Disadvantages ◽

Geospatial Information Systems

Most existing augmented reality (AR) applications are suitable for cases in which only a small number of real world entities are involved, such as superimposing a character on a single surface. In this case, we only need to calculate pose of the camera relative to that surface. However, when an AR health or environmental application involves a one-to-one relationship between an entity in the real-world and the corresponding object in the computer model (geo-referenced object), we need to estimate the pose of the camera in reference to a common coordinate system for better geo-referenced object registration in the real-world. New innovations in developing cheap sensors, computer vision techniques, machine learning, and computing power have helped to develop applications with more precise matching between a real world and a virtual content. AR Tracking techniques can be divided into two subcategories: marker-based and marker-less approaches. This paper provides a comprehensive overview of marker-less registration and tracking techniques and reviews their most important categories in the context of ubiquitous Geospatial Information Systems (GIS) and AR focusing to health and environmental applications. Basic ideas, advantages, and disadvantages, as well as challenges, are discussed for each subcategory of tracking and registration techniques. We need precise enough virtual models of the environment for both calibrations of tracking and visualization. Ubiquitous GISs can play an important role in developing AR in terms of providing seamless and precise spatial data for outdoor (e.g., environmental applications) and indoor (e.g., health applications) environments.

Download Full-text

Virtual Object Replacement Based on Real Environments: Potential Application in Augmented Reality Systems

Applied Sciences ◽

10.3390/app9091797 ◽

2019 ◽

Vol 9 (9) ◽

pp. 1797

Author(s):

Chen ◽

Lin

Keyword(s):

Augmented Reality ◽

Virtual Environments ◽

Real World ◽

Point Clouds ◽

Virtual Object ◽

Movement Trajectory ◽

The Real ◽

Virtual Objects ◽

Real Environment ◽

Localization And Mapping

Augmented reality (AR) is an emerging technology that allows users to interact with simulated environments, including those emulating scenes in the real world. Most current AR technologies involve the placement of virtual objects within these scenes. However, difficulties in modeling real-world objects greatly limit the scope of the simulation, and thus the depth of the user experience. In this study, we developed a process by which to realize virtual environments that are based entirely on scenes in the real world. In modeling the real world, the proposed scheme divides scenes into discrete objects, which are then replaced with virtual objects. This enables users to interact in and with virtual environments without limitations. An RGB-D camera is used in conjunction with simultaneous localization and mapping (SLAM) to obtain the movement trajectory of the user and derive information related to the real environment. In modeling the environment, graph-based segmentation is used to segment point clouds and perform object segmentation to enable the subsequent replacement of objects with equivalent virtual entities. Superquadrics are used to derive shape parameters and location information from the segmentation results in order to ensure that the scale of the virtual objects matches the original objects in the real world. Only after the objects have been replaced with their virtual counterparts in the real environment converted into a virtual scene. Experiments involving the emulation of real-world locations demonstrated the feasibility of the proposed rendering scheme. A rock-climbing application scenario is finally presented to illustrate the potential use of the proposed system in AR applications.

Download Full-text