Distributions of lead isotopes with grain size in aeolian deposits

Terra Nova ◽  
2010 ◽  
pp. no-no
Author(s):  
J.-L. Feng ◽  
Z.-G. Hu ◽  
J.-Y. Cui ◽  
L.-P. Zhu
1982 ◽  
Vol 30 ◽  
pp. 71-77
Author(s):  
Else Kolstrup ◽  
Jeppe Bender Jørgensen

During trenching for a gas pipeline in southern Jutland extensive aeolian deposits were observed. This note describes their appearance, texture, and grain-size distributions, and it is concluded that deposits of both Older and Younger Coversands are present. The lithostratigraphical sequence is identical to that in the coversand areas in The Netherlands, Belgium, and northern Germany.


2021 ◽  
pp. 1-9
Author(s):  
Fuyuan Gao ◽  
Junhuai Yang ◽  
Shuyuan Wang ◽  
Youjun Wang ◽  
Kaiming Li ◽  
...  

Abstract The mid-latitude Westerlies (MLW) are one of the most important atmospheric circulation systems in the Northern Hemisphere, exerting a huge influence on the climate of the region downwind, and thus on vegetation, water resources, and human wellbeing. However, the seasonal variation of the MLW during the Holocene is not yet been fully understood, especially when its contribution is the most important. Here, we used end-member (EM) modeling analysis of the grain-size distributions of a high-altitude aeolian sedimentary sequence (4452 m a.s.l.) from the Yarlung Zangbo River valley in the southern Tibetan Plateau to reveal variations in the winter MLW during the Holocene. Analysis of seasonal differences in modern atmospheric circulation suggests that the southern Tibetan Plateau was heavily influenced by the mid-latitude Westerlies at the 400, 500, and 600 hPa levels in winter, while it was seldom influenced at these levels in summer. Four grain-size end-members are identified, representing distinct aerodynamic environments, of which EM1 (modal grain size 8.1 μm) can be used as a proxy of the winter MLW. A reconstruction of the variation of the winter MLW during the Holocene based on EM1 revealed that a weaker winter MLW occurred during the Early to Middle Holocene, and a stronger winter MLW during the Middle to Late Holocene. Overall, we suggest that this change in the winter MLW was closely related to the insolation/temperature/pressure gradient between low and high latitudes in the Northern Hemisphere.


Baltica ◽  
2018 ◽  
Vol 31 (1) ◽  
pp. 24-34
Author(s):  
Simon Troelstra ◽  
Cees Laban ◽  
Maarten Prins ◽  
Kay Beets ◽  
Maarten van Diepen ◽  
...  

Detailed analysis of a core taken within the framework of the Marker Wadden project reveals the sedimentary history of the central part of the Netherlands following the Holocene sea level rise. Grain size and thermogravimetric analyses coupled with micropalaeontological and stable oxygen isotope data provide a solid framework for a detailed reconstruction of the landscape during this time interval. The Pleistocene landscape of fluviatile and aeolian deposits was succeeded by periods of marsh growth, brackish semi-enclosed lakes and tidal flats until a permanent connection with the North Sea was established. Palynological data suggest human activities in the immediate surroundings of the research area.


Author(s):  
Talha A Al-Dubai ◽  
Satria Antoni ◽  
Aaid G Al-Zubieri ◽  
Jawad Majeed

This work discusses the composition and characteristic of the surficial sediments in the southern corniche of Jeddah, Saudi Red Sea coast, in an attempt to infer the surficial distribution pattern of minerals and provenance of sediments. Twenty-six superficial sediments samples were collected from backreef and forereef areas and were analyzed for grain size, CaCO3 content, and mineralogy. The textural of grain size range from gravel to mud fraction. The mud-dominated substrates (<63 µm) occur generally in the back-reef area near the shoreline (sheltered area) and in the lagoon. Gravel rich-sediments are mostly found in forereef regions. The highest content of aragonite and Mg-calcite occur in the forereef area, probably because to suitability the forereef region for chemical and biochemical precipitation of these minerals. High Mg-calcite and Dolomite are low in both the regions. The pyrite occurs in lagoon; this indicates the reductive conditions in this part. However, on the contrary the percentage of carbonate minerals were low in the backreef-flat area, which could be attributed to the supply of non-carbonate terrigenous materials. The terrigenous material contains quartz, k-feldspar, plagioclase and amphibole minerals and are dominant in backreef-flat area with averages of 12.7%, 7.13%, 2.93% and 0.65%, respectively. Their abundance could be attributed to the supply of terrigenous materials by Aeolian deposits and intermittent Wadis.


2018 ◽  
Vol 177 ◽  
pp. 43-52 ◽  
Author(s):  
J. Vandenberghe ◽  
Y. Sun ◽  
X. Wang ◽  
H.A. Abels ◽  
X. Liu

Author(s):  
K. P. Staudhammer ◽  
L. E. Murr

The effect of shock loading on a variety of steels has been reviewed recently by Leslie. It is generally observed that significant changes in microstructure and microhardness are produced by explosive shock deformation. While the effect of shock loading on austenitic, ferritic, martensitic, and pearlitic structures has been investigated, there have been no systematic studies of the shock-loading of microduplex structures.In the current investigation, the shock-loading response of millrolled and heat-treated Uniloy 326 (thickness 60 mil) having a residual grain size of 1 to 2μ before shock loading was studied. Uniloy 326 is a two phase (microduplex) alloy consisting of 30% austenite (γ) in a ferrite (α) matrix; with the composition.3% Ti, 1% Mn, .6% Si,.05% C, 6% Ni, 26% Cr, balance Fe.


Author(s):  
R. Sinclair ◽  
B.E. Jacobson

INTRODUCTIONThe prospect of performing chemical analysis of thin specimens at any desired level of resolution is particularly appealing to the materials scientist. Commercial TEM-based systems are now available which virtually provide this capability. The purpose of this contribution is to illustrate its application to problems which would have been intractable until recently, pointing out some current limitations.X-RAY ANALYSISIn an attempt to fabricate superconducting materials with high critical currents and temperature, thin Nb3Sn films have been prepared by electron beam vapor deposition [1]. Fine-grain size material is desirable which may be achieved by codeposition with small amounts of Al2O3 . Figure 1 shows the STEM microstructure, with large (∽ 200 Å dia) voids present at the grain boundaries. Higher quality TEM micrographs (e.g. fig. 2) reveal the presence of small voids within the grains which are absent in pure Nb3Sn prepared under identical conditions. The X-ray spectrum from large (∽ lμ dia) or small (∽100 Ǻ dia) areas within the grains indicates only small amounts of A1 (fig.3).


Author(s):  
Takao Suzuki ◽  
Hossein Nuri

For future high density magneto-optical recording materials, a Bi-substituted garnet film ((BiDy)3(FeGa)5O12) is an attractive candidate since it has strong magneto-optic effect at short wavelengths less than 600 nm. The signal in read back performance at 500 nm using a garnet film can be an order of magnitude higher than a current rare earth-transition metal amorphous film. However, the granularity and surface roughness of such crystalline garnet films are the key to control for minimizing media noise.We have demonstrated a new technique to fabricate a garnet film which has much smaller grain size and smoother surfaces than those annealed in a conventional oven. This method employs a high ramp-up rate annealing (Γ = 50 ~ 100 C/s) in nitrogen atmosphere. Fig.1 shows a typical microstruture of a Bi-susbtituted garnet film deposited by r.f. sputtering and then subsequently crystallized by a rapid thermal annealing technique at Γ = 50 C/s at 650 °C for 2 min. The structure is a single phase of garnet, and a grain size is about 300A.


Sign in / Sign up

Export Citation Format

Share Document