AIR-DRYING CHARACTERISTICS, EFFECTIVE MOISTURE DIFFUSIVITY AND ACTIVATION ENERGY OF GRAPE LEAVES

2011 ◽  
Vol 36 (2) ◽  
pp. 161-168 ◽  
Author(s):  
İBRAHİM DOYMAZ
2015 ◽  
Vol 11 (6) ◽  
pp. 851-860 ◽  
Author(s):  
Man Zhou ◽  
Zhouyi Xiong ◽  
Jie Cai ◽  
Hanguo Xiong

Abstract Convective air drying characteristics and qualities of non-fried instant noodles at five temperatures from 80 to 120°C and velocities of 1.0, 2.0 and 3.0 m/s were investigated. Different mathematical models were fitted to study the drying behaviors and the Logarithmic model was the most adequate in describing the drying tests. Results showed that the drying process occurred in a falling rate periods and the effective moisture diffusivity increased with temperature and velocity, ranging from 4.41×10−8 to 1.75×10−7 m2/s with an activation energy of 16.73 kJ/mol. The rehydration attributes changed with both velocity and temperature. Increasing temperature and velocity decreased hardness, increased cohesiveness and resilience generally while had no impact on springiness. Drying temperature greatly influenced the color of noodles, whereas velocity displayed no significant effect. Microstructural analysis indicated that noodle presented hollow and porous structure with numerous and small voids, which might partly explain their distinct behaviors.


2008 ◽  
Vol 19 (2) ◽  
pp. 127 ◽  
Author(s):  
S.B. BAKAL ◽  
K.H. GEDAM ◽  
G.P. SHARMA

In developed countries, more than 50% potatoes are consumed as processed products. As drying is the vital phenomenon in processing, it is necessary to investigate the drying characteristics and its kinetics. In this experimental study, drying kinetics of Potato in two different shape of cuboidal & cylindrical with three aspect ratio was investigated as a function of drying conditions. Experiments were conducted using air temperatures of 50, 60 and 70 ºC, at velocity of 7 ms-1. The experimental moisture data were fitted to Page and simple models available in the literature, and a good agreement was observed. The Page model gave better fit than simple model. In the ranges covered, the values of the effective moisture diffusivity, Deff were obtained between 2.278 × 10-9 to 3.314 × 10-8 m2s-1 from the Fick's diffusion model. Using Deff, the value of activation energy (Ea) was determined assuming the Arrhenius-type temperature relationship.


2016 ◽  
Vol 12 (5) ◽  
pp. 481-489 ◽  
Author(s):  
Daniel I. Onwude ◽  
Norhashila Hashim ◽  
Rimfiel B. Janius ◽  
Nazmi Nawi ◽  
Khalina Abdan

Abstract This study seeks to investigate the effects of temperature (50, 60, 70 and 80 °C) and material thickness (3, 5 and 7 mm), on the drying characteristics of pumpkin (Cucurbita moschata). Experimental data were used to estimate the effective moisture diffusivities and activation energy of pumpkin by using solutions of Fick’s second law of diffusion or its simplified form. The calculated value of moisture diffusivity with and without shrinkage effect varied from a minimum of 1.942 × 10–8 m2/s to a maximum of 9.196 × 10–8 m2/s, while that of activation energy varied from 5.02158 to 32.14542 kJ/mol with temperature ranging from 50 to 80 °C and slice thickness of 3 to 7 mm at constant air velocity of 1.16 m/s, respectively. The results indicated that with increasing temperature, and reduction of slice thickness, the drying time was reduced by more than 30 %. The effective moisture diffusivity increased with an increase in drying temperature with or without shrinkage effect. An increase in the activation energy was observed due to an increase in the slice thickness of the pumpkin samples.


Author(s):  
Samuel Enahoro Agarry

The objective of this study was to investigate the drying characteristics and kinetics of red pepper and bitter leaf under the influence of different drying temperatures. The drying experiments were carried out at dry bulb temperature of 35, 45, 55 and 75oC, respectively in an oven dryer. The results showed that as drying temperature increased, drying rate also increased and the drying time decreased. It was observed that un-sliced red pepper and sliced bitter leaf would dry within 2.5-12 h and 1.67-7 h, respectively at temperature ranging from 75 to 35oC. The drying of red pepper and bitter leaf was both in the constant and falling rate period. Four semi-empirical mathematical drying models (Newton, Page, Henderson and Pabis, and Logarithmic models) were fitted to the experimental drying curves. The models were compared using the coefficient of determination (R^2) and the root mean square error (RMSE). The Page model has shown a better fit to the experimental drying data of red pepper and bitter leaf, respectively as relatively compared to other tested models. Moisture transport during drying was described by the application of Fick’s diffusion model and the effective moisture diffusivity was estimated. The value ranges from 15.69 to 84.79 × 10-9 m2/s and 0.294 to 1.263 × 10-9 m2/s for red pepper and bitter leaf, respectively. The Arrhenius-type relationship describes the temperature dependence of effective moisture diffusivity and was determined to be 37.11 kJ/mol and 32.86 kJ/mol for red pepper and bitter leaf, respectively. A correlation between the drying time and the heat transfer area was also developed.


Sign in / Sign up

Export Citation Format

Share Document