The digestion property evaluation of oil embedded in soybean protein–phospholipid nanocomposite aggregate particle

Author(s):  
Xuyang Ji ◽  
Yaoming Cui ◽  
Xue Liu ◽  
Hao Zhu ◽  
Jianzhang Zheng ◽  
...  
Author(s):  
L.E. Murr ◽  
J.S. Dunning ◽  
S. Shankar

Aluminum additions to conventional 18Cr-8Ni austenitic stainless steel compositions impart excellent resistance to high sulfur environments. However, problems are typically encountered with aluminum additions above about 1% due to embrittlement caused by aluminum in solid solution and the precipitation of NiAl. Consequently, little use has been made of aluminum alloy additions to stainless steels for use in sulfur or H2S environments in the chemical industry, energy conversion or generation, and mineral processing, for example.A research program at the Albany Research Center has concentrated on the development of a wrought alloy composition with as low a chromium content as possible, with the idea of developing a low-chromium substitute for 310 stainless steel (25Cr-20Ni) which is often used in high-sulfur environments. On the basis of workability and microstructural studies involving optical metallography on 100g button ingots soaked at 700°C and air-cooled, a low-alloy composition Fe-12Cr-5Ni-4Al (in wt %) was selected for scale up and property evaluation.


1968 ◽  
Vol 27 (2) ◽  
pp. 484 ◽  
Author(s):  
A. J. Clifford ◽  
A. D. Tillman
Keyword(s):  

2018 ◽  
Vol 47 (3) ◽  
pp. 320-327
Author(s):  
Ja Min Kim ◽  
Min Seon Song ◽  
Kyung Soo Lee ◽  
Kyung Young Yoon

1969 ◽  
Vol 61 (4) ◽  
pp. 601-603 ◽  
Author(s):  
T. Hymowitz ◽  
F. I. Collins ◽  
S. J. Gibbons
Keyword(s):  

1969 ◽  
Vol 16 (1) ◽  
pp. 10-14 ◽  
Author(s):  
KAZUMOTO HASHIZUME ◽  
SHINICHIRO KITA ◽  
TOKUJI WATANABE
Keyword(s):  

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2535
Author(s):  
Ji-Bong Choi ◽  
Yu-Kyoung Kim ◽  
Seon-Mi Byeon ◽  
Jung-Eun Park ◽  
Tae-Sung Bae ◽  
...  

In this study, a hydrogel using single and double crosslinking was prepared using GelMA, a natural polymer, and the effect was evaluated when the double crosslinked hydrogel and tannic acid were treated. The resulting hydrogel was subjected to physicochemical property evaluation, biocompatibility evaluation, and animal testing. The free radicals generated through APS/TEMED have a scaffold form with a porous structure in the hydrogel, and have a more stable structure through photo crosslinking. The double crosslinked hydrogel had improved mechanical strength and better results in cell compatibility tests than the single crosslinked group. Moreover, in the hydrogel transplanted into the femur of a rat, the double crosslinked group showed an osteoinductive response due to the attachment of bone minerals after 4 and 8 weeks, but the single crosslinked group did not show an osteoinductive response due to rapid degradation. Treatment with a high concentration of tannic acid showed significantly improved mechanical strength through H-bonding. However, cell adhesion and proliferation were limited compared to the untreated group due to the limitation of water absorption capacity, and no osteoinduction reaction was observed. As a result, it was confirmed that the treatment of high-concentration tannic acid significantly improved mechanical strength, but it was not a suitable method for improving bone induction due to the limitation of water absorption.


Author(s):  
Junping Yu ◽  
Guolong Zhao ◽  
Wei Li ◽  
Ying Zhang ◽  
Peng Wang ◽  
...  

Abstract Key message Identification and functional analysis of the male sterile gene MS6 in Glycine max. Abstract Soybean (Glycine max (L.) Merr.) is an important crop providing vegetable oil and protein. The male sterility-based hybrid breeding is a promising method for improving soybean yield to meet the globally growing demand. In this research, we identified a soybean genic male sterile locus, MS6, by combining the bulked segregant analysis sequencing method and the map-based cloning technology. MS6, highly expressed in anther, encodes an R2R3 MYB transcription factor (GmTDF1-1) that is homologous to Tapetal Development and Function 1, a key factor for anther development in Arabidopsis and rice. In male sterile ms6 (Ames1), the mutant allele contains a missense mutation, leading to the 76th leucine substituted by histidine in the DNA binding domain of GmTDF1-1. The expression of soybean MS6 under the control of the AtTDF1 promoter could rescue the male sterility of attdf1 but ms6 could not. Additionally, ms6 overexpression in wild-type Arabidopsis did not affect anther development. These results evidence that GmTDF1-1 is a functional TDF1 homolog and L76H disrupts its function. Notably, GmTDF1-1 shows 92% sequence identity with another soybean protein termed as GmTDF1-2, whose active expression also restored the fertility of attdf1. However, GmTDF1-2 is constitutively expressed at a very low level in soybean, and therefore, not able to compensate for the MS6 deficiency. Analysis of the TDF1-involved anther development regulatory pathway showed that expressions of the genes downstream of TDF1 are significantly suppressed in ms6, unveiling that GmTDF1-1 is a core transcription factor regulating soybean anther development.


2021 ◽  
pp. 106903
Author(s):  
Chaitra U ◽  
A.V. Muhammed Ali ◽  
Mahesha M. G ◽  
Akshaykumar Kompa ◽  
Dhananjaya Kekuda ◽  
...  

LWT ◽  
2021 ◽  
Vol 145 ◽  
pp. 111320
Author(s):  
Yanhua Ding ◽  
Haile Ma ◽  
Ke Wang ◽  
S.M. Roknul Azam ◽  
Yaoyao Wang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document