scholarly journals Sectoral Analysis of Competitiveness of Wood Processing Industry in the Czech Republic

2015 ◽  
Vol 63 (1) ◽  
pp. 293-302 ◽  
Author(s):  
Andrea Sujová ◽  
Petra Hlaváčková
Keyword(s):  
Czech Republic ◽  
Natural Resources ◽  
Foreign Trade ◽  
Competitive Ability ◽  
Sustainable Growth ◽  
Raw Material ◽  
Processing Industry ◽  
The Czech Republic ◽  
Wood Processing ◽  
Renewable Natural Resources

Wood processing industry (WPI) is a sector based on renewable natural resources of wood raw material. It is therefore able of sustainable growth and be competitive on the international markets. The interest of the European Union is to build economy based on renewable natural resources, resulting in the need to pay increased attention to the development and support of the WPI. The aim of the paper is to evaluate the level and development of competitiveness of WPI in the Czech Republic in subsectoral structure for a period of ten years through the establishment of indicators based on foreign trade data of industry using mathematical and statistical methods. To reach the goal we set up a system of indicators measuring sectoral competitiveness. Achieved results in indicators have shown that, despite the WPI creates active foreign trade balance and contributes to surplus balance of country, it achieves low value of indicator revealed comparative advantage (RCA) with a negative, decreasing trend, thus industry gradually loses its competitive ability. Analysis was also found, that the reason for low competitive ability of WPI is low specialisation of country in the commodity group, which was confirmed by statistical method of correlation analysis.

scholarly journals Sustainable Development Model of Performance of Woodworking Enterprises in the Czech Republic

Forests ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 672
Author(s):  
Jakub Michal ◽  
David Březina ◽  
Dalibor Šafařík ◽  
Robert Babuka
Keyword(s):  
Sustainable Development ◽  
Czech Republic ◽  
Current Model ◽  
Raw Material ◽  
Added Value ◽  
Production Model ◽  
The European Union ◽  
The Czech Republic ◽  
Wood Processing ◽  
Use Of Resources

The current requirements put on the Member States of the European Union (“EU”) in the area of sustainability and climate-neutral economy through strategic visions such as “Agenda 2030” or “A Clean planet for all” demonstrate the increasing need for quick identification of the changes required in the use of renewable and nonrenewable natural resources. Forests are a particular specific area of such changes. They represent a part of the ecosystem that is important for society from the economic, social, and environmental perspectives. Current climate changes have had a negative effect on the state of forestry in the Czech Republic and have raised many questions of how to ensure its sustainability. Besides the changes in forestry, the situation has also affected the sector primarily depending on the production function of forests and whose coexistence is conditioned. Taking specific sectors as examples, the article presents some prospects that could result in more efficient use of resources and defines potential synergic effects. Analyses of primary and secondary information sources were used to create preferential models (the term “preferential” in the context of the article represents opportunities through which it is possible to achieve an improvement in competitiveness and market advantage over the current model of wood processing and timber trade in the Czech Republic. The model works with potential perspectives and respects the challenges in the field of sustainable development) of timber and wood raw material production and processing and preferential and of economic efficiency (the term “efficiency” in the article represents the technical efficiency of the use of resources to achieve maximum economic benefit and added value. The aim is to increase the economic potential of individual sectors of primary and secondary processing in relation to timber sources) of woodworking businesses. The production model indicates that the energy use of wood, the expansion of the production mix in construction, the use of biomass and digestate in agroforestry, and the logging waste recovery are the most prospective sectors. The model presenting preferential areas in the woodworking industry development with respect to sustainability identified the need to increase associated production and material efficiency in construction and energy sectors, as well as insufficient activity of the sectors associated with technological innovations, FSC and PEFC certification prospects, bioeconomy and circular economy, a considerable need for wage growth in the sector and increased use of the existing production capacities by both domestic and foreign sales.

scholarly journals Entry Into the Common Market of the European Union in Terms of Czech Republic’s Foreign Trade with Dairy Products

2018 ◽  
Vol 66 (2) ◽  
pp. 605-616 ◽  
Author(s):  
Ivo Zdráhal ◽  
Věra Bečvářová
Keyword(s):  
European Union ◽  
Czech Republic ◽  
Foreign Trade ◽  
Dairy Products ◽  
Business Environment ◽  
Common Market ◽  
Milk Product ◽  
The European Union ◽  
The Czech Republic ◽  
The Eu

The aim of the paper is to evaluate the development of the Czech foreign trade in milk and milk products and specify the typical features and consequences within its territorial and commodity structure using a specific system of indicators intended to show a relevant image on the topic. The analysis covers the period between 1999 and 2015 and are interpreted in the context of changes of the business environment that have occurred in the last two decades, particularly in relation to the Czech Republic’s entry into the European Union. Throughout the studied period, the Czech Republic revealed a positive balance of trade in milk and dairy products, as well as favourable values of TC index (value of coverage of import by export). The dynamics of the territorial structure of export and import is embodied in the overall trade dynamics between the Czech Republic and countries of EU-28. The Czech Republic’s entry into the EU common market, however, led to a change in the trading milk product structure. As a negative is regarded the fact that the structure of Czech export to the EU countries has changed and that is mainly concentrated on basic raw milk or dairy products of the first phase of processing with relatively low added value.

scholarly journals Uso da argila no processo produtivo da cerâmica vermelha: Um estudo de caso no município de Paudalho, Pernambuco

2015 ◽  
Vol 10 (1) ◽  
Author(s):  
Y. M. Paz ◽  
R. M. Holanda ◽  
S. G. El-Deir
Keyword(s):  
Natural Resources ◽  
Production Process ◽  
High Availability ◽  
Raw Material ◽  
Renewable Natural Resources ◽  
Ceramic Blocks ◽  
Renewable Natural Resource ◽  
The City ◽  
Red Ceramics

As frações granulométricas do solo são consideradas recursos naturais não renováveis, devido a escala de tempo necessária para sua formação. A argila possui elevada disponibilidade na natureza, e por isso seu uso ainda é indiscriminado. É a matéria-prima principal para as indústrias de cerâmica vermelha pulverizadas em todo o território brasileiro. O objetivo do trabalho foi realizar uma discussão acerca do recurso natural não renovável argila e seu uso no processo produtivo da Indústria de cerâmica vermelha. Este foi desenvolvido através de pesquisa bibliográfica, e estudo de caso com realização de visitas técnicas a uma indústria de cerâmica vermelha localizada no município de Paudalho no estado de Pernambuco. No ano de 2013 a Indústria X adquiriu para estoque e consumo 70.161 toneladas, para uma produção de 35.806.268 blocos de cerâmica. De todo o quantitativo produzido houve uma perda de 7,5%, que reflete em 4.768 toneladas de argila e num prejuízo aproximado de R$ 845.835,52. Através do trabalho realizado percebe-se que há uma necessidade de planejamento da exploração e uso dos recursos naturais não renováveis, pois estes podem se tornar escassos e inviabilizar determinados processos produtivos. Isso pode acarretar em conflitos sociais e econômicos, pela valoração dos recursos e diminuição de disponibilidade para uso, ocasionando redução dos lucros por parte dos empresários e por consequência diminuição na oferta de empregos.Use of clay in the production process of the Red Ceramics: A case study in the city of Paudalho, Pernambuco Abstract: The fractions of soil are considered non-renewable natural resources, because the time scale required for its formation. Clay has high availability in nature, and therefore its use is still indiscriminate. It is the main raw material for the manufacture of red ceramic sprayed throughout the Brazilian territory. The objective was to conduct a discussion of non-renewable natural resource clay and its use in industry's production process of red ceramic. It was developed through literature review and case study of technical a red ceramic industry in the municipality of Paudalho in Pernambuco state visits. In 2013 the X Industry acquired for stock and consumption 70,161 tons, for a production of 35,806,268 ceramic blocks. The entire quantity produced there was a loss of 7.5%, which reflects in 4,768 tons of clay and an approximate loss of R $ 845,835.52. Through work is noticed that there is a need for planning of exploration and use of non-renewable natural resources, as they may become scarce and derail certain production processes. This can lead to social and economic conflicts, the valuation of resources and reduced availability for use, resulting in lower profits for entrepreneurs and consequently decrease in the supply of jobs.

scholarly journals Cascade Use of Wood in the Czech Republic

Forests ◽  
2020 ◽  
Vol 11 (6) ◽  
pp. 681
Author(s):  
Róbert Babuka ◽  
Andrea Sujová ◽  
Václav Kupčák
Keyword(s):  
Czech Republic ◽  
Input Data ◽  
Statistical Data ◽  
Added Value ◽  
Specific Situation ◽  
The Czech Republic ◽  
Wood Volume ◽  
Primary Processing ◽  
Wood Processing ◽  
Input Method

Research Highlights: One of the priorities of the European Commission is to build up an effective circular economy based on recycling and multiple use of materials. Wood biomass is a renewable raw material and can be used several times in a cascading sequence. Each country has a unique situation regarding the availability and utilization of wood sources. Background and Objectives: The objective of this study was to analyze wood flow in the Czech Republic using the cascading principle of biomass use. The specific situation in the Czech Republic lies in a lack of valid and reliable input data from official statistics. Therefore, the reverse input method was applied. Materials and Methods: Input data analyses of roundwood sources and foreign trade were based on official statistical data. The calculation of raw wood volume consumption in primary processing was performed based on the data after our own correction and recalculation. It was then possible to build up a basic model of multi-stage cascade wood use. The input volume of roundwood was divided among all types of primary processing production using conversion factors. Results: Cascading use of wood (CUW) showed the level of efficiency of the resource. Official statistical input data and the reversed input data regarding raw wood volume entering wood processing revealed differences at a level of 27%. The overall CUW in the Czech Republic indicates a high rate of wood use in primary processing with low added value and in generating energy. Conclusions: The reverse input method reveals the real situation of wood consumption irrespective of the level of official statistical data. It is suitable to apply in an environment of incomplete or incorrect input data. CUW in Czechia showed an opportunity for increasing the efficiency of wood utilization. The structure of wood use needs to be optimized towards creating greater added value.

scholarly journals Sustainable management of mountain forests in the Czech Republic

2012 ◽  
Vol 50 (No. 11) ◽  
pp. 526-532 ◽  
Author(s):  
S. Vacek ◽  
V. Balcar
Keyword(s):  
Czech Republic ◽  
Forest Management ◽  
Forest Ecosystems ◽  
Sustainable Forest Management ◽  
Self Regulation ◽  
Raw Material ◽  
Anthropogenic Factors ◽  
Mountain Forests ◽  
Natural Forests ◽  
The Czech Republic

Forest management in the Czech Republic (CR) was not shaped in the environment of natural forests but in the territory that was influenced by unregulated felling and animal grazing for a long time. Hence the fear for sustainable and balanced benefits from forests endangered by long-term uncontrolled exploitation was legitimate. Almost after three centuries of application of the sustainability principle, forests are considered not only as a source of renewable wood raw material but also as a tool of the environment formation. Mountain forests are an important landscape component of this country. They are an object of specific importance from the aspect of natural environment conservation, stabilization of natural processes and general landscape homeostasis. In addition, they fulfil a number of production and non-production functions. Cardinal elements of sustainable forest management in the CR conditions are as follows: management of the forest as an ecosystem, i.e. transition from exclusive care of forest tree species and their stands to care of the whole forest ecosystems; restructuring (conversion, reconstruction) of damaged and declining forests; optimum (species, genetic, spatial, age) structure of forest ecosystems differentiated according to site conditions and management targets; differentiated transition from general management to group or individual methods; utilization and support of spontaneous processes such as natural regeneration, competition and other principles of self-regulation. The above cardinal elements of sustainable forest management are applicable to forests of the CR in general, but their importance considerably increases in mountain forests where many species survive on the margin of subsistence. Moreover, mountain forests of CR have been heavily destroyed by anthropogenic factors, especially air-pollution ecological stresses, during the last three or four decades.

Changing foreign trade patterns in post-reform czech industry (1989-1995) - empirical evidence

1997 ◽  
Vol 6 (4) ◽  
Author(s):  
Frank Stolze
Keyword(s):  
Czech Republic ◽  
Foreign Trade ◽  
Trade Flows ◽  
Trade Patterns ◽  
The Czech Republic ◽  
Factor Endowments ◽  
Energy Inputs ◽  
Correlation Tests ◽  
Positive Effect ◽  
The Eu

Summarizing our analysis we must acknowledge that it is still difficult to get a precise picture of the role which different factors play in determining international competitiveness of industrial branches. The most limits of the analysis are as follows: comprehensive data on input intensities of industrial branches were only available for West European countries; the assumptions necessary for a precise forecast of competitiveness positions through RCA-indicators are not been fulfilled; trade patterns are still distorted by production structures and capacities inherited from the planned economy. Although it may be premature to seriously address the question to what extent factor endowments determine trade flows between the Czech Republic and the EU, we have found a number of interesting tendencies. For the year 1989 correlation tests and an analysis of the most 10, 20 and 30 factor-intensive industries revealed a certain positive effect of capital, labour and energy inputs.

scholarly journals Časně eneolitické depozitum v Bílých Karpatech na moravsko-slovenském pomezí

2021 ◽  
pp. 69-77
Author(s):  
Jaroslav Peška
Keyword(s):  
Czech Republic ◽  
Slovak Republic ◽  
Pure Copper ◽  
Carpathian Basin ◽  
Raw Material ◽  
Unique Form ◽  
Metal Detector ◽  
Copper Strip ◽  
The Czech Republic ◽  
White Carpathians

In 2017, a relatively small copper artefact hoard was found using a metal detector just a few metres from the border between the Czech Republic and the Slovak Republic. This was on a distinctive slope on the Moravian side of the White Carpathians, at a relatively high altitude (746 m) in the cadastral area of the municipality of Lopeník. The hoard was lent for documenting by the finder and then returned to them. It contained three flat Jordanów type axes, a Şiria type hammer axe (only the second find in Moravia) and, most probably, raw material in a unique form of two discs of flat copper strip coiled into the shape of a pyramidal spiral. Some of the items were made of pure copper (with the presumed source in the southern part of the Carpathian Basin), some of a material similar to Nógrádmarcal antimony copper, forwhich a Slovak origin is considered. Based on the presence of several Jordanów type axes, we date the hoard to the Early Eneolithic and link it to the bearers of the Jordanów culture. Due to its location, the hoard is further distinctive evidence of transport corridors passing from the Carpathian Basin via the White Carpathians, where most parallels to the artefacts under study have been found. The presence of the two “strip material” discs is completely atypical.

scholarly journals Milk Quality, Somatic Cell Count, and Economics of Dairy Goats Farm in the Czech Republic

2021 ◽  
Author(s):  
Jana Rychtarova ◽  
Zuzana Krupova ◽  
Michaela Brzakova ◽  
Marketa Borkova ◽  
Ondrej Elich ◽  
...  
Keyword(s):  
Czech Republic ◽  
Mammary Gland ◽  
Small Ruminants ◽  
Raw Material ◽  
Dairy Goat ◽  
Human Consumption ◽  
The Czech Republic ◽  
Direct Sales ◽  
Goat’S Milk ◽  
Goat's Milk

Mammary gland anatomy in small ruminants is very similar to that of cows; however, milk synthesis throughout lactation exhibits many functional particularities in small ruminants compared with that of cows. Goat’s milk is beneficial for human nutrition owing to the fatty acid composition, fat globule size, and conjugated linoleic acid content. As a raw material for dairy products, goat’s milk must be safe for human consumption. The number of mesophilic microorganisms, somatic cells, and selected mastitis pathogens should be limited. A prerequisite for the production of milk of high hygienic quality is the health of the mammary gland. Goat’s milk processing into cheese and other products is in the Czech Republic mostly performed on farms, partly for direct sales to consumers and partly for supplying selected stores. Revenues from dairy commodities represent the most important source of income for dairy goat farms. Mammary gland health has an important effect on the economics of dairy goat farms. Profitability can fall by up to 1/3 owing to indirect effects of udder health problems.

Sign in / Sign up

Export Citation Format

Share Document