scholarly journals Sustainable Development Model of Performance of Woodworking Enterprises in the Czech Republic

Forests ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 672
Author(s):  
Jakub Michal ◽  
David Březina ◽  
Dalibor Šafařík ◽  
Robert Babuka
Keyword(s):  
Sustainable Development ◽  
Czech Republic ◽  
Current Model ◽  
Raw Material ◽  
Added Value ◽  
Production Model ◽  
The European Union ◽  
The Czech Republic ◽  
Wood Processing ◽  
Use Of Resources

The current requirements put on the Member States of the European Union (“EU”) in the area of sustainability and climate-neutral economy through strategic visions such as “Agenda 2030” or “A Clean planet for all” demonstrate the increasing need for quick identification of the changes required in the use of renewable and nonrenewable natural resources. Forests are a particular specific area of such changes. They represent a part of the ecosystem that is important for society from the economic, social, and environmental perspectives. Current climate changes have had a negative effect on the state of forestry in the Czech Republic and have raised many questions of how to ensure its sustainability. Besides the changes in forestry, the situation has also affected the sector primarily depending on the production function of forests and whose coexistence is conditioned. Taking specific sectors as examples, the article presents some prospects that could result in more efficient use of resources and defines potential synergic effects. Analyses of primary and secondary information sources were used to create preferential models (the term “preferential” in the context of the article represents opportunities through which it is possible to achieve an improvement in competitiveness and market advantage over the current model of wood processing and timber trade in the Czech Republic. The model works with potential perspectives and respects the challenges in the field of sustainable development) of timber and wood raw material production and processing and preferential and of economic efficiency (the term “efficiency” in the article represents the technical efficiency of the use of resources to achieve maximum economic benefit and added value. The aim is to increase the economic potential of individual sectors of primary and secondary processing in relation to timber sources) of woodworking businesses. The production model indicates that the energy use of wood, the expansion of the production mix in construction, the use of biomass and digestate in agroforestry, and the logging waste recovery are the most prospective sectors. The model presenting preferential areas in the woodworking industry development with respect to sustainability identified the need to increase associated production and material efficiency in construction and energy sectors, as well as insufficient activity of the sectors associated with technological innovations, FSC and PEFC certification prospects, bioeconomy and circular economy, a considerable need for wage growth in the sector and increased use of the existing production capacities by both domestic and foreign sales.

scholarly journals Cascade Use of Wood in the Czech Republic

Forests ◽  
2020 ◽  
Vol 11 (6) ◽  
pp. 681
Author(s):  
Róbert Babuka ◽  
Andrea Sujová ◽  
Václav Kupčák
Keyword(s):  
Czech Republic ◽  
Input Data ◽  
Statistical Data ◽  
Added Value ◽  
Specific Situation ◽  
The Czech Republic ◽  
Wood Volume ◽  
Primary Processing ◽  
Wood Processing ◽  
Input Method

Research Highlights: One of the priorities of the European Commission is to build up an effective circular economy based on recycling and multiple use of materials. Wood biomass is a renewable raw material and can be used several times in a cascading sequence. Each country has a unique situation regarding the availability and utilization of wood sources. Background and Objectives: The objective of this study was to analyze wood flow in the Czech Republic using the cascading principle of biomass use. The specific situation in the Czech Republic lies in a lack of valid and reliable input data from official statistics. Therefore, the reverse input method was applied. Materials and Methods: Input data analyses of roundwood sources and foreign trade were based on official statistical data. The calculation of raw wood volume consumption in primary processing was performed based on the data after our own correction and recalculation. It was then possible to build up a basic model of multi-stage cascade wood use. The input volume of roundwood was divided among all types of primary processing production using conversion factors. Results: Cascading use of wood (CUW) showed the level of efficiency of the resource. Official statistical input data and the reversed input data regarding raw wood volume entering wood processing revealed differences at a level of 27%. The overall CUW in the Czech Republic indicates a high rate of wood use in primary processing with low added value and in generating energy. Conclusions: The reverse input method reveals the real situation of wood consumption irrespective of the level of official statistical data. It is suitable to apply in an environment of incomplete or incorrect input data. CUW in Czechia showed an opportunity for increasing the efficiency of wood utilization. The structure of wood use needs to be optimized towards creating greater added value.

scholarly journals Potential of Forest Biomass Resources for Renewable Energy Production in the Czech Republic

Energies ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 47
Author(s):  
Dalibor Šafařík ◽  
Petra Hlaváčková ◽  
Jakub Michal
Keyword(s):  
Czech Republic ◽  
Energy Production ◽  
Forest Biomass ◽  
Significant Risk ◽  
Raw Material ◽  
Material Base ◽  
The European Union ◽  
Renewable Sources ◽  
The Czech Republic ◽  
Biomass Resources

In the European Green Deal and the Climate Act, the European Union has committed itself to achieving climate neutrality by 2050. This goal is to be achieved by joint efforts of all economic sectors, including forestry and its downstream sectors. One way to attain this goal is the effective and sustainable use of forest biomass for energy production. This article aims to quantify the potential of forest biomass resources for the production of electrical and thermal energy based on official departmental statistics, the current legal framework for forestry and the environment, and research results in the context of an extreme change in the raw material base due to the ongoing calamity caused by the spread of insect pests in the Czech Republic. This extreme can classify as a significant risk to the security of the energy supply from renewable sources in the event of oversizing new installed energy production from renewable sources. Based on data and calculations, an overall annual volume of dendromass available for energy production in the Czech Republic for the period extending to 2036 was quantified at the value of 13.473 million tons per year. Consequently, it is clear that the overall dendromass resources for energy production in the Czech Republic are not sufficient to achieve the EU’s ambitious objective.

scholarly journals Sectoral Analysis of Competitiveness of Wood Processing Industry in the Czech Republic

2015 ◽  
Vol 63 (1) ◽  
pp. 293-302 ◽  
Author(s):  
Andrea Sujová ◽  
Petra Hlaváčková
Keyword(s):  
Czech Republic ◽  
Natural Resources ◽  
Foreign Trade ◽  
Competitive Ability ◽  
Sustainable Growth ◽  
Raw Material ◽  
Processing Industry ◽  
The Czech Republic ◽  
Wood Processing ◽  
Renewable Natural Resources

Wood processing industry (WPI) is a sector based on renewable natural resources of wood raw material. It is therefore able of sustainable growth and be competitive on the international markets. The interest of the European Union is to build economy based on renewable natural resources, resulting in the need to pay increased attention to the development and support of the WPI. The aim of the paper is to evaluate the level and development of competitiveness of WPI in the Czech Republic in subsectoral structure for a period of ten years through the establishment of indicators based on foreign trade data of industry using mathematical and statistical methods. To reach the goal we set up a system of indicators measuring sectoral competitiveness. Achieved results in indicators have shown that, despite the WPI creates active foreign trade balance and contributes to surplus balance of country, it achieves low value of indicator revealed comparative advantage (RCA) with a negative, decreasing trend, thus industry gradually loses its competitive ability. Analysis was also found, that the reason for low competitive ability of WPI is low specialisation of country in the commodity group, which was confirmed by statistical method of correlation analysis.

Resources provision of woodworking industries in Ukraine: cross-national and inter-regional comparisons

2019 ◽  
pp. 145-154
Author(s):  
Svitlana Ishchuk ◽  
Lyubomyr Sozanskyy
Keyword(s):  
Raw Materials ◽  
Dynamic Assessment ◽  
Timber Harvesting ◽  
Necessary Condition ◽  
The European Union ◽  
Environmental Aspects ◽  
Fuel Wood ◽  
Significant Deterioration ◽  
The Czech Republic ◽  
Wood Processing

Sufficient supply of woodworking with raw materials while preserving the ecology and rational use of wood is a necessary condition for the functioning of the woodworking industry as one of the key segments of the national economy. The issue is of particular importance given the deepening of world integration processes and the introduction of a moratorium on timber exports from Ukraine. It actualizes the study of the state and dynamics of the formation of raw materials potential of domestic woodworks. The purpose of the article is a structural and dynamic assessment of the economic and environmental aspects of formation of the resource potential of Ukrainian woodworks in comparison with the countries of the European Union, as well as in the regional section by types of wood. In the structure of merchantable wood harvested in Ukraine, fuel wood share increased by 4.3 pp. during 2011-2016, whereas in 2017 it increased by 3.8 pp. compared to 2016 and amounted to 61.4%. Unlike in Ukraine, in the vast majority of EU countries business timber is the basis of the structure of harvested merchantable timber. Thus, in the neighboring countries with similar forest landscape – Poland and the Czech Republic – the share of fuel wood in 2017 was 11.6% and 12.3%, in Slovakia – only 6.3%, and in the EU as a whole – 23. 2%. Hence, the significant deterioration of the structure of the harvested merchantable timber in Ukraine can be interpreted as a threat to environmental, and therefore to national security. On the other hand, the results of the assessments revealed an increase in the volume of commercial timber harvesting in Ukraine (in 18 regions) in 2018, as well as in the level of forest reproduction in the leading regions from the harvesting of merchantable timber (Zhytomyr, Kyiv and Rivne regions) and a decrease in the death rate. The restoration of the logical patterns between the dynamics of the loss of stands and the harvesting of commercial and fuel wood are signs of the beginning of positive tendencies in ensuring the preservation and rationalization of raw potential of domestic woodworks and, at the same time, improving the conditions for deepening the level of wood processing. Further authors’ research in this area will be devoted to the search for effective forms of wood industry development in Ukraine, in particular in the Western region.

Czech Republic, Hungary, and Slovakia

2018 ◽  
Author(s):  
Michal Onderco
Keyword(s):  
Czech Republic ◽  
Actual Process ◽  
Iron Curtain ◽  
The European Union ◽  
The Czech Republic ◽  
Civil Military Relations ◽  
Military Forces ◽  
Joint Procurement ◽  
Military Relations ◽  
The Cold War

This chapter focuses on defence transformations in the Czech Republic, Slovakia, and Hungary since the end of the cold war. The three lesser powers of Central Europe all eventually joined NATO and the European Union, following the fall of the Iron Curtain. The process they underwent completely transformed their security strategies and military doctrines, but the plans to transform their military forces have developed slowly, and the actual process has been interrupted and incomplete. This chapter addresses the development of civil–military relations, the main milestones in the development of the respective states’ national security policies, and the main changes in the structure of military forces in each of these countries. Finally, the chapter looks at the nascent trends towards military cooperation between the three countries, including military sharing and joint procurement.

scholarly journals Operational USLE-Based Modelling of Soil Erosion in Czech Republic, Austria, and Bavaria—Differences in Model Adaptation, Parametrization, and Data Availability

2020 ◽  
Vol 10 (10) ◽  
pp. 3647
Author(s):  
Peter Fiener ◽  
Tomáš Dostál ◽  
Josef Krása ◽  
Elmar Schmaltz ◽  
Peter Strauss ◽  
...  
Keyword(s):  
Czech Republic ◽  
Soil Erosion ◽  
Water Conservation ◽  
Data Availability ◽  
The European Union ◽  
Specific Knowledge ◽  
The Czech Republic ◽  
Environmental Threats ◽  
Implementation Techniques ◽  
Consistent Method

In the European Union, soil erosion is identified as one of the main environmental threats, addressed with a variety of rules and regulations for soil and water conservation. The by far most often officially used tool to determine soil erosion is the Universal Soil Loss Equation (USLE) and its regional adaptions. The aim of this study is to use three different regional USLE-based approaches in three different test catchments in the Czech Republic, Germany, and Austria to determine differences in model results and compare these with the revised USLE-base European soil erosion map. The different regional model adaptations and implementation techniques result in substantial differences in test catchment specific mean erosion (up to 75% difference). Much more pronounced differences were modelled for individual fields. The comparison of the region-specific USLE approaches with the revised USLE-base European erosion map underlines the problems and limitations of harmonization procedures. The EU map limits the range of modelled erosion and overall shows a substantially lower mean erosion compared to all region-specific approaches. In general, the results indicate that even if many EU countries use USLE technology as basis for soil conservation planning, a truly consistent method does not exist, and more efforts are needed to homogenize the different methods without losing the USLE-specific knowledge developed in the different regions over the last decades.

Sign in / Sign up

Export Citation Format

Share Document