Fundamental Design Issues of Brush Seals for Industrial Applications

2002 ◽  
Vol 124 (2) ◽  
pp. 293-300 ◽  
Author(s):  
Saim Dinc ◽  
Mehmet Demiroglu ◽  
Norman Turnquist ◽  
Jason Mortzheim ◽  
Gayle Goetze ◽  
...  
Keyword(s):  
High Speed ◽  
Failure Modes ◽  
Industrial Applications ◽  
Operating Conditions ◽  
Design Parameters ◽  
Design Criteria ◽  
Seal Design ◽  
Brush Seal ◽  
Brush Seals ◽  
As Stress

Advanced seals have been applied to numerous turbine machines over the last decade to improve the performance and output. Industrial experiences have shown that significant benefits can be attained if the seals are designed and applied properly. On the other hand, penalties can be expected if brush seals are not designed correctly. In recent years, attempts have been made to apply brush seals to more challenging locations with high speed (>400 m/s), high temperature (>650 °C), and discontinuous contact surfaces, such as blade tips in a turbine. Various failure modes of a brush seal can be activated under these conditions. It becomes crucial to understand the physical behavior of a brush seal under the operating conditions, and to be capable of quantifying seal life and performance as functions of both operating parameters and seal design parameters. Design criteria are required for different failure modes such as stress, fatigue, creep, wear, oxidation etc. This paper illustrates some of the most important brush seal design criteria and the trade-off of different design approaches.

Fundamental Design Issues of Brush Seals for Industrial Applications

2001 ◽  
Author(s):  
Saim Dinc ◽  
Mehmet Demiroglu ◽  
Norman Turnquist ◽  
Jason Mortzheim ◽  
Gayle Goetze ◽  
...  
Keyword(s):  
High Speed ◽  
Failure Modes ◽  
Industrial Applications ◽  
Operating Conditions ◽  
Design Parameters ◽  
Design Criteria ◽  
Seal Design ◽  
Brush Seal ◽  
Brush Seals ◽  
As Stress

Advanced seals have been applied to numerous turbine machines over the last decade to improve the performance and output. Industrial experiences have shown that significant benefits can be attained if the seals are designed and applied properly. On the other hand, penalties can be expected if brush seals are not designed correctly. In recent years, attempts have been made to apply brush seals to more challenging locations with high speed (>400 m/s), high temperature (>650 °C), and discontinuous contact surfaces, such as blade tips in a turbine. Various failure modes of a brush seal can be activated under these conditions. It becomes crucial to understand the physical behavior of a brush seal under the operating conditions, and to be capable of quantifying seal life and performance as functions of both operating parameters and seal design parameters. Design criteria are required for different failure modes such as stress, fatigue, creep, wear, oxidation etc. This paper illustrates some of the most important brush seal design criteria and the trade-off of different design approaches.

CAE Based Brush Seal Characterization for Stiffness and Stress Levels

2015 ◽  
Author(s):  
E. Tolga Duran ◽  
Mahmut F. Aksit ◽  
Murat Ozmusul
Keyword(s):  
Operating Conditions ◽  
Design Parameters ◽  
Backing Plate ◽  
Seal Design ◽  
Brush Seal ◽  
Stress Levels ◽  
Brush Seals ◽  
Main Effects ◽  
State Pressure

Brush seals are complex structures having variety of design parameters, all of which affect the seal behavior under turbine operating conditions. The complicated nature of the seal pack and frictional interactions of rotor, backing plate and bristles result in nonlinear response of the brush seal to variances of design parameters. This study presents CAE based characterization of brush seals, which aims to investigate the main effects of several brush seal design parameters on brush seal stiffness and stress levels. Characterization work of this study includes free-state rotor rub (unpressurized seal), steady state (pressure load without rotor interference) and pressurized-rotor interference conditions.

Design Parameters of Brush Seals and Their Impact on Seal Performance

2012 ◽  
Author(s):  
H. Schwarz ◽  
J. Friedrichs ◽  
J. Flegler
Keyword(s):  
Steam Turbine ◽  
Gas Turbine ◽  
Large Scale ◽  
Design Parameters ◽  
Test Rig ◽  
Pressure Drops ◽  
Seal Design ◽  
Brush Seal ◽  
Extreme Load ◽  
Brush Seals

Brush seals, which were originally designed for gas turbine applications, have been successfully applied to large-scale steam turbines within the past decade. From gas turbine applications, the fundamental behavior and designing levers are known. However, the application of brush seals to a steam turbine is still a challenge. This challenge is mainly due to the extreme load on the brush seal while operating under steam. Furthermore, it is difficult to test brush seals under realistic conditions, i.e. under live steam conditions with high pressure drops. Due to these insufficiencies, 2 test rigs were developed at the University of Technology Braunschweig, Germany. The first test rig is operated under pressurized air and allows testing specific brush seal characteristics concerning their general behavior. The knowledge gained from these tests can be validated in the second test rig, which is operated under steam at pressure drops of 45 bar and temperatures up to 450 °C. Using both the air test rig and the steam test rig helps keep the testing effort comparably small. Design variants can be pre-tested with air, and promising brush seal designs can consequently be tested in the steam seal test rig. The paper focuses on a clamped brush seal design which, amongst others, is used in steam turbine blade paths and shaft seals of current Siemens turbines. The consequences of the brush assembly on the brush appearance and brush performance are shown. The clamped brush seal design reveals several particularities compared to welded brushes. It could be shown that the clamped bristle pack tends to gape when clamping forces rise. Gapping results in an axially expanding bristle pack, where the bristle density per unit area and the leakage flow vary. Furthermore, the brush elements are usually assembled with an axial lay angle, i.e. the bristles are reclined against the backing plate. Hence, the axial lay angle is also part of the investigation.

Evaluation of Flow Behavior for Clearance Brush Seals

2008 ◽  
Vol 130 (1) ◽  
Author(s):  
Yahya Dogu ◽  
Mahmut F. Aksit ◽  
Mehmet Demiroglu ◽  
Osman Saim Dinc
Keyword(s):  
Flow Field ◽  
Flow Behavior ◽  
Industrial Applications ◽  
Operating Conditions ◽  
Brush Seal ◽  
Sealing Performance ◽  
Computational Fluid Dynamics Analysis ◽  
Flow Features ◽  
Brush Seals ◽  
Initial Clearance

The industrial applications of brush seals have been increasing due to their superior sealing performance. Advances in the understanding of seal behavior have been pushing the design limits to higher-pressure load, temperature, surface speed, and rotor excursion levels. The highest sealing performance can be achieved when the bristle pack maintains contact with the rotor surface. However, due to many design and operational constraints, most seals operate with some clearance. This operating clearance cannot be avoided due to rotor runouts, transient operating conditions, or excessive bristle wear. In some applications, a minimum initial clearance is required to ensure a certain amount of flow rate for component cooling or purge flow. Typically, brush seal failure occurs in the form of degraded sealing performance due to increasing seal clearance. The seal performance is mainly characterized by the flow field in close vicinity of the bristle pack, through the seal-rotor clearance, and within the bristle pack. This work investigates the flow field for a brush seal operating with some bristle-rotor clearance. A nonlinear form of the momentum transport equation for a porous medium of the bristle pack has been solved by employing the computational fluid dynamics analysis. The results are compared with prior experimental data. The flow field for the clearance seal is observed to have different characteristics compared to that for the contact seal. Outlined as well are the flow features influencing the bristle dynamics.

Analysis of Contact Mechanics for Rotor-Bristle Interference of Brush Seal

2003 ◽  
Vol 125 (2) ◽  
pp. 414-421 ◽  
Author(s):  
R. J. Stango ◽  
H. Zhao ◽  
C. Y. Shia
Keyword(s):  
Contact Force ◽  
Flexural Rigidity ◽  
Operating Conditions ◽  
Contact Forces ◽  
Design Parameters ◽  
Attractive Alternative ◽  
Seal Design ◽  
Brush Seal ◽  
Wide Range ◽  
Deformation Mechanics

Brush seals have proven to be an attractive alternative to labyrinth seals for turbomachinery applications. This innovation in seal technology utilizes both the high temperature capability of special-alloy wire and the flexural adaptability of fibers to accommodate a wide range of operating conditions that are encountered during service. The effectiveness of the seal is principally derived from the bristles ability to endure forces imparted by both the fluid and shaft, and yet maintain contact between the filament tips and the surface of the rotor. Consequently, contact forces generated along the interface of the fiber tip and rotor are an important consideration for both the design and performance of the rotor-seal assembly. This paper focuses on evaluating brush seal forces that arise along the surface of the rotor due to the dimensional disparity or interference between the rotor-fiber. Filament tip contact forces are computed on the basis of an in-plane, large deformation mechanics analysis of a cantilever beam, and validation of the model is assessed by using an electronic balance for measuring the shear and normal force exerted by a bristle tip onto a flat, hardened surface. Formulation of the mechanics problem is briefly reviewed, and includes the effect of Coulombic friction at the interface of the fiber tip and rotor. Filament contact force is used as a basis for computing bearing stress along the fiber-rotor interface. Results are reported for a range of brush seal design parameters in order to provide a better understanding of the role that seal geometry, friction, and bristle flexural rigidity play in generating rotor contact force.

Computational Fluid Dynamics Investigation of Brush Seal Leakage Performance Depending on Geometric Dimensions and Operating Conditions

2015 ◽  
Vol 138 (3) ◽  
Author(s):  
Yahya Dogu ◽  
Ahmet S. Bahar ◽  
Mustafa C. Sertçakan ◽  
Altuğ Pişkin ◽  
Ercan Arıcan ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Pressure Ratio ◽  
Plate Thickness ◽  
Operating Conditions ◽  
Design Parameters ◽  
Backing Plate ◽  
Brush Seal ◽  
Front Plate ◽  
Brush Seals

Brush seals require custom design and tailoring due to their behavior driven by flow dynamic, which has many interacting design parameters, as well as their location in challenging regions of turbomachinery. Therefore, brush seal technology has not reached a conventional level across the board standard. However, brush seal geometry generally has a somewhat consistent form. Since this consistent form does exist, knowledge of the leakage performance of brush seals depending on specific geometric dimensions and operating conditions is critical and predictable information in the design phase. However, even though there are common facts for some geometric dimensions available to designers, open literature has inadequate quantified information about the effect of brush seal geometric dimensions on leakage. This paper presents a detailed computational fluid dynamics (CFD) investigation quantifying the leakage values for some geometric variables of common brush seal forms functioning in some operating conditions. Analyzed parameters are grouped as follows: axial dimensions, radial dimensions, and operating conditions. The axial dimensions and their ranges are front plate thickness (z1 = 0.040–0.150 in.), distance between front plate and bristle pack (z2 = 0.010–0.050 in.), bristle pack thickness (z3 = 0.020–0.100 in.), and backing plate thickness (z4 = 0.040–0.150 in.). The radial dimensions are backing plate fence height (r1 = 0.020–0.100 in.), front plate fence height (r2 = 0.060–0.400 in.), and bristle free height (r3 = 0.300–0.500 in.). The operating conditions are chosen as clearance (r0 = 0.000–0.020 in.), pressure ratio (Rp = 1.5–3.5), and rotor speed (n = 0–40 krpm). CFD analysis was carried out by employing compressible turbulent flow in 2D axisymmetric coordinate system. The bristle pack was treated as a porous medium for which flow resistance coefficients were calibrated by using literature based test data. Selected dimensional and operational parameters for a common brush seal form were investigated, and their effects on leakage performance were quantified. CFD results show that, in terms of leakage, the dominant geometric dimensions were found to be the bristle pack thickness and the backing plate fence height. It is also clear that physical clearance dominates leakage performance, when compared to the effects of other geometric dimensions. The effects of other parameters on brush seal leakage were also analyzed in a comparative manner.

An Investigation of Heat Generation Characteristics of Brush Seals

2007 ◽  
Author(s):  
Mehmet Demiroglu ◽  
John A. Tichy
Keyword(s):  
Contact Force ◽  
Heat Generation ◽  
Operating Conditions ◽  
Frictional Heat ◽  
Design Parameters ◽  
Frictional Heat Generation ◽  
Operation Conditions ◽  
Seal Design ◽  
Wide Range ◽  
Brush Seals

Brush seals are considered as a category of compliant seals, which tolerate a great high level of interference between the seal and the rotor or shaft. Their superior leakage characteristics have opened many application fields in the turbo-machinery world, ranging from industrial steam turbines to jet engines. However, brush seal designers have to find a trade-off between the lower parasitic leakage but higher heat generation properties of brush seals for given operation conditions. As brush seals can maintain contact with the rotor for a wide range of operating conditions, the contact force/pressure generated at the seal-rotor interface becomes an important design parameter for sustained seal performance and longevity of its service life. Furthermore, due to this contact force at the interface, frictional heat generation is inevitable and must be evaluated for various design and operating conditions. In this paper, frictional heat generation at the sealrotor interface is studied. To capture temperature rise at the interface, a thermal image of the seal and rotor is taken with an infrared camera under various operating conditions. The temperature map of the rotor is compared to results from thermal finite element analysis of the rotor to back calculate the heat flux to the rotor. A closed form equation for frictional heat generation is suggested as a function of seal design parameters, material properties, friction coefficient and empirical factors from testing.

Axial Inclination of the Bristle Pack, a New Design Parameter of Brush Seals for Improved Operational Behavior in Steam Turbines

2014 ◽  
Author(s):  
H. Schwarz ◽  
J. Friedrichs ◽  
J. Flegler
Keyword(s):  
Design Parameter ◽  
Rotational Velocity ◽  
Operating Conditions ◽  
Design Parameters ◽  
Leakage Flow ◽  
Rotating Shaft ◽  
Blow Down ◽  
Seal Design ◽  
Back Plate ◽  
Brush Seals

Within this paper, the axial inclination of the bristle pack as a new design parameter for brush seals for use in a steam turbine and other rotating equipment is discussed. It is widely known that the behavior of brush seals can be influenced by important main design parameters of the bristle pack such as, but not limited to, the bristle thickness, the lay angle or the bristle length. Furthermore, the variation of the front and back plate results in different seal characteristics [1]. Each one of these parameters also has an influence on bristle damping, the blow down capability and thus the leakage flow. In addition, under changing and transient operating conditions, the radial adaptivity, which is essential for accommodating shaft deflection, is also a very important property. For a comprehensive seal design, the wear characteristic and deterioration effects have to be considered beside the above mentioned properties. At the Technical University of Braunschweig, brush seals are experimentally investigated with above focus on different test rigs. These rigs allow a detailed sealing performance investigation including live bristle pack observations and blow down measurement using cold air as well as brush seal investigations using live steam conditions up to 50bars and 450°C and a rotating shaft with representative rotational velocity. The paper shows and discusses experimental results of different axial inclinations of the bristle pack, while testing with constant front and back plate designs. The influences on the blow down, the axial behavior of the bristle pack, the leakage flow and the bristle pack stiffness are shown. The new effect of a rotating blow down type of bristle oscillation is also shown and discussed and finally a classification of the seal behavior depending of the different axial inclination is given.

Effect of Flow-Induced Radial Load on Brush Seal/Rotor Contact Mechanics

2004 ◽  
Vol 126 (1) ◽  
pp. 208-215 ◽  
Author(s):  
Haifang Zhao ◽  
Robert J. Stango
Keyword(s):  
Flexural Rigidity ◽  
Reaction Force ◽  
Contact Forces ◽  
Design Parameters ◽  
Radial Load ◽  
Bending Stress ◽  
Seal Design ◽  
Brush Seal ◽  
Rotor Surface ◽  
Brush Seals

Brush seals comprised of special-alloy wire bristles are currently being used in lieu of traditional labyrinth seals for turbomachinery applications. This advancement in seal technology utilizes close-packed bristles that readily undergo lateral deformation arising from aerodynamic loads as well as loads imparted by the rotor surface. Thus, during operation, filament tips remain in contact with the rotor surface, which, in turn, inhibits leakage between successive stages of the turbine, and increases engine efficiency. However, contact forces generated at the interface of the rotor and fiber tips can lead to eventual bristle fatigue and wear of the seal/rotor system. Therefore, it is important that reliable modeling techniques be developed that can help identify complex relationships among brush seal design parameters, in-service loads, and contact forces that arise during the operation of turbomachinery. This paper is concerned with modeling and evaluating bristle deformation, bending stress, and bristle/rotor contact forces that are generated at the interface of the fiber and rotor surface due to radial fluid flow, and augments previous work reported by the author’s, which assessed filament tip forces that arise solely due to interference between the bristle/rotor. The current problem derives its importance from aerodynamic forces that are termed “blow-down,” that is, the inward radial flow of gas in close proximity to the face of the seal. Thus, bristle deformation, bristle tip reaction force, and bristle bending stress is computed on the basis of an in-plane, large-displacement mechanics analysis of a cantilever beam that is subjected to a uniform radial load. Solutions to the problem are obtained for which the filament tip is constrained to lie on the rotor surface, and includes the effect of Coulombic friction at the interface of the fiber tip and rotor. Contact forces are obtained for a range of brush seal design parameters including fiber lay angle, flexural rigidity, and length. In addition, the governing equation is cast in non-dimensional form, which extends the range of applicability of solutions to brush seals having a more general geometry and material composition.

Design Features and Performance Details of Brush Seals for Turbine Applications

2006 ◽  
Author(s):  
Matthias Neef ◽  
Erik Sulda ◽  
Norbert Su¨rken ◽  
Jan Walkenhorst
Keyword(s):  
Phenomenological Approach ◽  
Performance Degradation ◽  
Operating Conditions ◽  
Special Focus ◽  
Steam Turbines ◽  
Seal Design ◽  
Brush Seal ◽  
Brush Seals ◽  
And Performance

Adaptive and contacting seals such as brush seals have been successfully applied to turbomachinery for several years. In large steam turbine applications, however, various challenges still persist. Special focus is directed at the long-term performance and longevity of brushes on conventional spring-backed seal segments in steam turbines. This issue is particularly related to wear during startup conditions. This paper discusses the results of wear tests, derived from simulated transient turbine behavior, where the resultant seal leakage under steady state conditions is monitored. It is shown that the brush seal is significantly capable of adapting to varying operating conditions, but exhibits a degree of performance degradation during the initial startups. Together with previously reported mid-term wear data and an experience based long-term phenomenological approach a general model for brush seal performance degradation is developed. This model can be used for performance prediction and exerts influence on brush seal design.

Sign in / Sign up

Export Citation Format

Share Document