A Self-Heated Thermistor Technique to Measure Effective Thermal Properties From the Tissue Surface

1987 ◽  
Vol 109 (4) ◽  
pp. 330-335 ◽  
Author(s):  
P. A. Patel ◽  
J. W. Valvano ◽  
J. A. Pearce ◽  
S. A. Prahl ◽  
C. R. Denham
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Properties ◽  
Tissue Blood Flow ◽  
Conductivity Measurements ◽  
Bioheat Equation ◽  
Tissue Conductivity ◽  
Diffusivity Measurements ◽  
Tissue Surface ◽  
Effective Thermal Properties

A microcomputer based instrument to measure effective thermal conductivity and diffusivity at the surface of a tissue has been developed. Self-heated spherical thermistors, partially embedded in an insulator, are used to simultaneously heat tissue and measure the resulting temperature rise. The temperature increase of the thermistor for a given applied power is a function of the combined thermal properties of the insulator, the thermistor, and the tissue. Once the probe is calibrated, the instrument accurately measures the thermal properties of tissue. Conductivity measurements are accurate to 2 percent and diffusivity measurements are accurate to 4 percent. A simplified bioheat equation is used which assumes the effective tissue thermal conductivity is a linear function of perfusion. Since tissue blood flow strongly affects heat transfer, the surface thermistor probe is quite sensitive to perfusion.

Heat Exchange Between a Tube and Water-Saturated Soil

1986 ◽  
Vol 108 (4) ◽  
pp. 298-302 ◽  
Author(s):  
C. A. van der Star ◽  
G. A. M. van Meurs ◽  
C. J. Hoogendoorn
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Properties ◽  
Saturated Soil ◽  
Mutual Distance ◽  
Tube Material ◽  
Surrounding Water ◽  
Analytical Approximations ◽  
Water Saturated ◽  
Regional Groundwater

The heat transfer between a cylinder and the surrounding water-saturated soil is studied numerically. Parameters which influence this heat transfer are thermal properties of the soil, dimension and thermal conductivity of the tube material, and a regional groundwater flow. The results are compared to analytical approximations. When two tubes are present, their mutual distance is also such a parameter.

Thermal Conductivity and Specific Heat Evaluation of Tissue Using Laser

2020 ◽  
Vol 1002 ◽  
pp. 303-310
Author(s):  
Sudad Issam Younis ◽  
Haqi I. Qatta ◽  
Mohammed Jalal Abdul Razzaq ◽  
Khalid S. Shibib
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Properties ◽  
Specific Heat ◽  
Iterative Procedure ◽  
Input Data ◽  
Maximum Error ◽  
Heat Transfer Analysis ◽  
Long Wavelength ◽  
Inverse Heat Transfer

In this work, an inverse heat transfer analysis was used to determine thermal conductivity and specific heat of tissue using special iteration. A laser with a long wavelength was utilized to impose heat to the tissue. The heat that induced in the sample causes an increase in the temperature of a tissue which is measured by a thermocouple. The readings were used together with that analytically obtained from the solution of the heat equation in an iterative procedure to obtain the thermal properties of tissue. By using this method, accurate thermal conductivity and specific heat of tissue could be obtained. It was found that the maximum error in output result and the error in input data were in the same order and that there was a linear relationship between output and input errors.

Effective heat conductivity of Honeycomb (porous) composite panel

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Cletus Matthew Magoda ◽  
Jasson Gryzagoridis ◽  
Kant Kanyarusoke
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Composite Material ◽  
Thermal Properties ◽  
Heat Conductivity ◽  
Composite Panel ◽  
Porous Composite ◽  
Content Type ◽  
One Dimensional ◽  
Coefficient Of Thermal Conductivity

Purpose The purpose of this paper is to validate an assumption of what to use as an effective (steady state) heat transfer coefficient of thermal conductivity for the honeycomb core sandwiched by Fiberglass face sheets composite. A one-dimensional model based on Fourier law is developed. The results are validated experimentally. Design/methodology/approach The results were obtained from the one-dimensional mathematical model of an overall or effective heat conductivity of the Honeycomb composite panel. These results were validated experimentally by applying heat flux on the specimen under controlled environment. The surface temperatures at different voltages were recorded and analysed. The skin of the sandwich composite material used in the investigation was Fiberglass sheet with a thickness of 0.5 mm at the bottom and 1.0 mm at the top surface. Both skins have a stacking sequence of zero degrees. Due to the presence of air cells in the core (Honeycomb), the model considers the conduction, convection and radiation heat transfer, across the thickness of the panel, combined as an effective conduction mode, whose value may be predicted by using the coefficient of thermal conductivity of the air based on the average temperature difference between the two skins. The experimental results for the heat transfer through the thickness of the panel provide validation of this assumption/prediction. Both infrared thermography and conventional temperature measurement techniques (thermocouples) were used to collect the data. Findings The heat transfer experiment and mathematical modeling were conducted. The data obtained were analyzed, and it was found that the effective thermal conductivity was temperature-dependent as expected. The effective thermal conductivity of the honeycomb panel was close to that of air, and its value could be predicted if the panel surface temperatures were known. It was also found that as temperature raised the variation between experimental and predicted effective air conduction raised up. This is because there was an increase in molecular diffusion and vibration. Therefore, the convection heat transfer increased at high temperatures and the air became an insulator. Originality/value Honeycomb composite panels have excellent physical and thermal properties that influence their performance. This study provides an appropriate method in determining thermal conductivity, which is one of the critical thermal properties of porous composite material. This paper also gives useful and practical data to industries that use or manufacture honeycomb composite panels.

Thermal Aspects of Grinding: The Effect of the Wheel Bond on Heat Transfer to an Abrasive Grain

1991 ◽  
Vol 113 (4) ◽  
pp. 395-401 ◽  
Author(s):  
M. W. Harris ◽  
A. S. Lavine
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Properties ◽  
Heat Conduction ◽  
Beneficial Effect ◽  
Surface Temperature ◽  
Thermal Damage ◽  
High Thermal Conductivity ◽  
Abrasive Grain ◽  
Grain Surface

Heat generated during grinding can cause thermal damage to the workpiece and wheel. It is therefore important to understand the thermal aspects of grinding. This paper addresses heat conduction into the wheel, by considering a single abrasive grain in contact with the workpiece. In particular, the effect of the bond material on conduction into the grain is investigated. The results for the grain surface temperature are given in terms of parameters describing the geometry and thermal properties of the grain and bond. The beneficial effect of a high thermal conductivity for both the grain and the bond is clearly demonstrated.

scholarly journals Effect of the Circular Perforations on the Heat Transfer Enhancement by the Forced Convection from the Rectangular Fins

2018 ◽  
Vol 11 (3) ◽  
pp. 62-70 ◽  
Author(s):  
Wadhah Hussein Abdulrazzaq Al-Taha
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Properties ◽  
Heat Transfer Enhancement ◽  
Forced Convection ◽  
Heat Dissipation ◽  
Transfer Enhancement ◽  
Geometrical Dimensions

This study aims to investigate the effect of the circular perforation of the rectangular fin on the enhancement of the heat transfer by forced convection. The solid rectangular fin considered as a reference for comparison purpose with the perforated fin. The parameters taken into consideration are thermal properties and geometrical dimensions of the fin and its perforations. The area and heat transfer gain of the perforations fins were considered being the main parameters in this study. The results of this study showed that the heat dissipation was improved when used the perforation fins compared with the equivalent solid fin. The enhancement quantity of the heat dissipation from the fin depends on the thermal conductivity, the perforation dimension, thickness, longitudinal and lateral spacing. Finally, the perforating of the fins enhances the rate of heat dissipation as well as decreases the weight of the fin

Thermal Properties of Graphite Foam: Experiments and Modeling

Volume 1 ◽  
2004 ◽  
Author(s):  
N. Yu ◽  
C. C. Tee ◽  
H. Li
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Properties ◽  
Mesophase Pitch ◽  
Cooling Fluid ◽  
Open Cell ◽  
Manufacturing Technique ◽  
Fluid Properties ◽  
Transfer Properties ◽  
Graphite Foam

Mesophase pitch-derived open-cell graphite foams with excellent heat transfer properties have been developed by using a relatively simple manufacturing technique [1]. The specific thermal conductivity of the graphite foam is more than seven times greater than that of copper and six times greater than that of aluminum. The present work focuses on the interactions between the effective heat transfer properties and foam microstructure, temperature, and cooling fluid properties.

A Combined Experimental-Numerical Method to Evaluate Powder Thermal Properties in Laser Powder Bed Fusion

2018 ◽  
Author(s):  
Bo Cheng ◽  
Brandon Lane ◽  
Justin Whiting ◽  
Kevin Chou
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Properties ◽  
Thermal Diffusivity ◽  
Laser Flash ◽  
Powder Layer ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Powder Particles

Powder bed metal additive manufacturing (AM) utilizes a high-energy heat source scanning at the surface of a powder layer in a pre-defined area to be melted and solidified to fabricate parts layer by layer. It is known that powder bed metal AM is primarily a thermal process and further, heat conduction is the dominant heat transfer mode in the process. Hence, understanding the powder bed thermal conductivity is crucial to process temperature predictions, because powder thermal conductivity could be substantially different from its solid counterpart. On the other hand, measuring the powder thermal conductivity is a challenging task. The objective of this study is to investigate the powder thermal conductivity using a method that combines a thermal diffusivity measurement technique and a numerical heat transfer model. In the experimental aspect, disk-shaped samples, with powder inside, made by a laser powder bed fusion (LPBF) system, are measured using a laser flash system to obtain the thermal diffusivity and the normalized temperature history during testing. In parallel, a finite element model is developed to simulate the transient heat transfer of the laser flash process. The numerical model was first validated using reference material testing. Then, the model is extended to incorporate powder enclosed in an LPBF sample with thermal properties to be determined using an inverse method to approximate the simulation results to the thermal data from the experiments. In order to include the powder particles’ contribution in the measurement, an improved model geometry, which improves the contact condition between powder particles and the sample solid shell, has been tested. A multi-point optimization inverse heat transfer method is used to calculate the powder thermal conductivity. From this study, the thermal conductivity of a nickel alloy 625 powder in powder bed conditions is estimated to be 1.01 W/m·K at 500 °C.

The Thermal Conductivity and Viscosity of Non-Polar Hybrid CuO Nanofluid (CuO+ DEA + Cyclohexane) (CuO + DEA + 1-4 Dioxane)

2019 ◽  
Vol 17 (12) ◽  
pp. 965-967
Author(s):  
B. Rohini ◽  
A. Kingson Solomon Jeevaraj
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Copper Oxide ◽  
Viscosity Measurement ◽  
Nano Particles ◽  
Conductivity Measurements ◽  
Transfer Enhancement ◽  
Binary Fluid ◽  
New Class ◽  
Nano Fluid

Nano fluid is the new class of engineering fluid for the heat transfer applications. Copper Oxide (CuO) nano particles were dispersed in the binary fluid (Cyclohexane + DEA) and (1-4 dioxane + DEA) then prepared non-polar hybrid CuO nano fluid. Thermal conductivity (K ) and viscosity (η) of non-polar hybrid CuO nanofluid measured for very low concentration from 0.01 M to 0.06 M and various temperatures ranging from 298 K to 318 K. The transient hotwire method is used for the thermal conductivity measurements and viscometer is used for the viscosity measurement. As the concentration increases K decreases but it increases with the increase of temperature. η increases with the increase of concentration as well as with temperature. From the results the spectacular heat transfer enhancement occurred in the hybrid CuO nanofluid compared to the binary mixtures. The percentage increment of thermal conductivity of non-polar hybrid CuO nano fluid is of 15% to 20% and the viscosity increment is of from 18% to 25%.

Effective thermal properties of grinding wheels and grains

1998 ◽  
Vol 212 (8) ◽  
pp. 661-669 ◽  
Author(s):  
M N Morgan ◽  
W B Rowe ◽  
S C E Black ◽  
D R Allanson
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Boron Nitride ◽  
Thermal Performance ◽  
Cubic Boron Nitride ◽  
Energy Partitioning ◽  
Grinding Wheel ◽  
Grinding Wheels ◽  
Abrasive Grains ◽  
Effective Thermal Properties

The thermal properties of the grinding wheel are required for energy partitioning in grinding. This paper describes an investigation of the effective thermal properties of alumina and cubic boron nitride (CBN) grinding wheels. Results are presented for a novel sensor that was designed to measure the bulk thermal properties of grinding wheel samples. The effective bulk thermal properties of the grinding wheel and the effective thermal properties of the abrasive grains were also investigated. It was found that the bulk thermal property is dominated by the properties of the bond and does not account for the improved thermal performance of CBN compared with alumina. Values of the effective thermal conductivities for alumina and CBN abrasive grains are therefore proposed. It is concluded that the effective thermal conductivity of the grains is best obtained inversely from grinding experiments.

Sign in / Sign up

Export Citation Format

Share Document