Evaluation of sodium boiling models using KNS-37 LOF experiments

2021 ◽  
Author(s):  
Sara Perez-Martin ◽  
Marine Anderhuber ◽  
Laurent Laborde ◽  
N. Girault ◽  
Calogera Lombardo ◽  
...  
Keyword(s):  
Experimental Data ◽  
Two Phase Flow ◽  
Interface Tracking ◽  
Phase Flow ◽  
Reactor Performance ◽  
Two Phase ◽  
Flow Models ◽  
Code Performance ◽  
Dry Out ◽  
Physical Phenomena

Abstract The computational codes used in the evaluation of the ESFR-SMART reactor performance and specifically their sodium boiling models are assessed using two KNS-37 LOF experiments, i.e. L22 and L29 tests, where boiling onset and two-phase flow regime up to dry-out occurred. The well-equipped KNS-37 experimental facility provided very valuable information for understanding the physical phenomena occurring in a 37-pin subassembly under LOF conditions, as well as experimental data to be used for computational tools validation. NATOF-2D, SAS-SFR, TRACE, ASTEC-Na, CATHARE-2 & CATHARE-3 and NEPTUNE_CFD codes have been used in this exercise in order to compare the various boiling models and conclude on the advantages and limitations of them based on the comparison against the experimental data. Beyond boiling onset, the various sodium two-phase flow approaches determine the ability of the code to correctly represent the rewetting and voiding phases as well as cladding dry-out onset. A simulation performed by a CFD approach (NEPTUNE_CFD code) considering liquid-vapor interfaces by an interface-tracking method is also shown and compared with the others approaches. Conclusions on each code performance are presented where the improvements needed to solve the issues encountered are included. This paper provides a first step in the process to investigate the required evaluation of the sodium two-phase flow models able to assess the safety of new SFR core designs (e.g. low void cores) under accidental conditions such as ULOF transients.

scholarly journals Validation of NEPTUNE-CFD Two-Phase Flow Models Using Experimental Data

2014 ◽  
Vol 2014 ◽  
pp. 1-19 ◽  
Author(s):  
Jorge Pérez Mañes ◽  
Victor Hugo Sánchez Espinoza ◽  
Sergio Chiva Vicent ◽  
Michael Böttcher ◽  
Robert Stieglitz
Keyword(s):  
Experimental Data ◽  
Void Fraction ◽  
Two Phase Flow ◽  
Model Parameters ◽  
Phase Flow ◽  
Cfd Model ◽  
Two Phase ◽  
Flow Models ◽  
Phase Models ◽  
Good Agreement

This paper deals with the validation of the two-phase flow models of the CFD code NEPTUNEC-CFD using experimental data provided by the OECD BWR BFBT and PSBT Benchmark. Since the two-phase models of CFD codes are extensively being improved, the validation is a key step for the acceptability of such codes. The validation work is performed in the frame of the European NURISP Project and it was focused on the steady state and transient void fraction tests. The influence of different NEPTUNE-CFD model parameters on the void fraction prediction is investigated and discussed in detail. Due to the coupling of heat conduction solver SYRTHES with NEPTUNE-CFD, the description of the coupled fluid dynamics and heat transfer between the fuel rod and the fluid is improved significantly. The averaged void fraction predicted by NEPTUNE-CFD for selected PSBT and BFBT tests is in good agreement with the experimental data. Finally, areas for future improvements of the NEPTUNE-CFD code were identified, too.

Performance of Two-Phase Flow Models on the Prediction of Oscillatory Flow Conditions

2016 ◽  
Author(s):  
Catalina Posada ◽  
Paulo Waltrich
Keyword(s):  
Experimental Data ◽  
Steady State ◽  
Pressure Gradient ◽  
Two Phase Flow ◽  
Percentage Error ◽  
Phase Flow ◽  
Liquid Holdup ◽  
Two Phase ◽  
Flow Models ◽  
Absolute Percentage Error

The present investigation presents a comparative study between two-phase flow models and experimental data. Experimental data was obtained using a 42 m long, 0.05 m ID tube system. The experimental data include conditions for pressures ranging from 1.2 to 2.8 bara, superficial liquid velocities 0.02–0.3 m/s, and superficial gas velocity ranges 0.17–26 m/s. The experimental data was used to evaluate the performance of steady-state empirical and mechanistic models while estimating liquid holdup and pressure gradient under steady-state and oscillatory conditions. The purpose of this analysis is first to evaluate the accuracy of the models predicting the liquid holdup and pressure gradient under steady-state conditions. Then, after evaluating the models under state-steady conditions, the same models are used to predict the same parameters for oscillatory and periodic conditions for similar gas and liquid velocities. The transient multiphase flow simulator OLGA, which has been widely used in the oil and gas industry, was implemented to model one oscillatory case to evaluate the prediction improvement while using a transient instead of a steady-state model to predict oscillatory flows. For the model with best performance for steady-state pressure gradient prediction, the absolute percentage error is 12% for Uls = 0.02 m/s and 5% for Uls = 0.3. For oscillatory conditions, the absolute percentage error is 30% for Uls = 0.02 m/s and 4% for Uls = 0.3. OLGA results underpredict the experimental pressure gradient under oscillatory conditions with errors up to 30%. Therefore, it was possible to conclude that the models can predict the average of the oscillatory data almost as well as for steady-state conditions.

scholarly journals Port-Hamiltonian formulation of two-phase flow models

2021 ◽  
Vol 149 ◽  
pp. 104881
Author(s):  
H. Bansal ◽  
P. Schulze ◽  
M.H. Abbasi ◽  
H. Zwart ◽  
L. Iapichino ◽  
...  
Keyword(s):  
Two Phase Flow ◽  
Hamiltonian Formulation ◽  
Phase Flow ◽  
Two Phase ◽  
Flow Models

Upward Vertical Two-Phase Flow Through an Annulus—Part II: Modeling Bubble, Slug, and Annular Flow

1992 ◽  
Vol 114 (1) ◽  
pp. 14-30 ◽  
Author(s):  
E. F. Caetano ◽  
O. Shoham ◽  
J. P. Brill
Keyword(s):  
Flow Pattern ◽  
Annular Flow ◽  
Two Phase Flow ◽  
Flow Behavior ◽  
Bubble Flow ◽  
Phase Flow ◽  
Two Phase ◽  
Flow Through ◽  
Physical Phenomena ◽  
Good Agreement

Mechanistic models have been developed for each of the existing two-phase flow patterns in an annulus, namely bubble flow, dispersed bubble flow, slug flow, and annular flow. These models are based on two-phase flow physical phenomena and incorporate annulus characteristics such as casing and tubing diameters and degree of eccentricity. The models also apply the new predictive means for friction factor and Taylor bubble rise velocity presented in Part I. Given a set of flow conditions, the existing flow pattern in the system can be predicted. The developed models are applied next for predicting the flow behavior, including the average volumetric liquid holdup and the average total pressure gradient for the existing flow pattern. In general, good agreement was observed between the experimental data and model predictions.

scholarly journals Experimental data for the slug two-phase flow characteristics in horizontal pipeline

Data in Brief ◽  
2018 ◽  
Vol 16 ◽  
pp. 527-530 ◽  
Author(s):  
Abdalellah O. Mohmmed ◽  
Mohammad S. Nasif ◽  
Hussain H. Al-Kayiem
Keyword(s):  
Experimental Data ◽  
Two Phase Flow ◽  
Flow Characteristics ◽  
Phase Flow ◽  
Two Phase

scholarly journals Investigation of representing hysteresis in macroscopic models of two-phase flow in porous media using intermediate scale experimental data

2017 ◽  
Vol 53 (1) ◽  
pp. 199-221 ◽  
Author(s):  
Abdullah Cihan ◽  
Jens Birkholzer ◽  
Luca Trevisan ◽  
Ana Gonzalez-Nicolas ◽  
Tissa Illangasekare
Keyword(s):  
Experimental Data ◽  
Porous Media ◽  
Two Phase Flow ◽  
Flow In Porous Media ◽  
Phase Flow ◽  
Two Phase ◽  
Intermediate Scale ◽  
Macroscopic Models

Effect of Common Impurities on the Phase Behavior of Carbon-Dioxide-Rich Systems: Minimizing the Risk of Hydrate Formation and Two-Phase Flow

SPE Journal ◽  
2011 ◽  
Vol 16 (04) ◽  
pp. 921-930 ◽  
Author(s):  
Antonin Chapoy ◽  
Rod Burgass ◽  
Bahman Tohidi ◽  
J. Michael Austell ◽  
Charles Eickhoff
Keyword(s):  
Experimental Data ◽  
Carbon Dioxide ◽  
Phase Behavior ◽  
Water Content ◽  
Thermodynamic Model ◽  
Two Phase Flow ◽  
Hydrate Formation ◽  
Experimental Methodology ◽  
Phase Flow ◽  
Two Phase

Summary Carbon dioxide (CO2) produced by carbon-capture processes is generally not pure and can contain impurities such as N2, H2, CO, H2 S, and water. The presence of these impurities could lead to challenging flow-assurance issues. The presence of water may result in ice or gas-hydrate formation and cause blockage. Reducing the water content is commonly required to reduce the potential for corrosion, but, for an offshore pipeline system, it is also used as a means of preventing gas-hydrate problems; however, there is little information on the dehydration requirements. Furthermore, the gaseous CO2-rich stream is generally compressed to be transported as liquid or dense-phase in order to avoid two-phase flow and increase in the density of the system. The presence of impurities will also change the system's bubblepoint pressure, hence affecting the compression requirement. The aim of this study is to evaluate the risk of hydrate formation in a CO2-rich stream and to study the phase behavior of CO2 in the presence of common impurities. An experimental methodology was developed for measuring water content in a CO2-rich phase in equilibrium with hydrates. The water content in equilibrium with hydrates at simulated pipeline conditions (e.g., 4°C and up to 190 bar) as well as after simulated choke conditions (e.g., at -2°C and approximately 50 bar) was measured for pure CO2 and a mixture of 2 mol% H2 and 98 mol% CO2. Bubblepoint measurements were also taken for this binary mixture for temperatures ranging from -20 to 25°C. A thermodynamic approach was employed to model the phase equilibria. The experimental data available in the literature on gas solubility in water in binary systems were used in tuning the binary interaction parameters (BIPs). The thermodynamic model was used to predict the phase behavior and the hydrate-dissociation conditions of various CO2-rich streams in the presence of free water and various levels of dehydration (250 and 500 ppm). The results are in good agreement with the available experimental data. The developed experimental methodology and thermodynamic model could provide the necessary data in determining the required dehydration level for CO2-rich systems, as well as minimum pipeline pressure required to avoid two-phase flow, hydrates, and water condensation.

Sign in / Sign up

Export Citation Format

Share Document