scholarly journals A Numerical Model of the Onset of Stall Flutter in Cascades

1995 ◽  
Author(s):  
William S. Clark ◽  
Kenneth C. Hall
Keyword(s):  
Unsteady Flow ◽  
Stokes Equations ◽  
Fluid Dynamic ◽  
Computational Fluid Dynamic Model ◽  
Navier Stokes ◽  
Aeroelastic Stability ◽  
Blade Vibration ◽  
Navier Stokes Equations ◽  
The Mean ◽  
Stall Flutter

In this paper, we present a computational fluid dynamic model of the unsteady flow associated with the onset of stall flutter in turbomachinery cascades. The unsteady flow is modeled using the laminar Navier-Stokes equations. We assume that the unsteadiness in the flow is a small harmonic disturbance about the mean or steady flow. Therefore, the unsteady flow is governed by a small-disturbance form of the Navier-Stokes equations. These linear variable coefficient equations are discretized on a deforming computational grid and solved efficiently using a multiple-grid Lax-Wendroff scheme. A number of numerical examples are presented which demonstrate the destabilizing influence of viscosity on the aeroelastic stability of airfoils in cascade, especially for torsional modes of blade vibration.

The inlet flow structure of a conceptual open-nose supersonic drone

2021 ◽  
pp. 095441002098304
Author(s):  
Eiman B Saheby ◽  
Xing Shen ◽  
Anthony P Hays ◽  
Zhang Jun
Keyword(s):  
Flow Structure ◽  
Stokes Equations ◽  
Fluid Dynamic ◽  
Three Dimensional ◽  
Computational Fluid Dynamic Simulation ◽  
Navier Stokes ◽  
Ansys Fluent ◽  
Navier Stokes Equations ◽  
Aerodynamic Efficiency ◽  
Performance Effects

This study describes the aerodynamic efficiency of a forebody–inlet configuration and computational investigation of a drone system, capable of sustainable supersonic cruising at Mach 1.60. Because the whole drone configuration is formed around the induction system and the design is highly interrelated to the flow structure of forebody and inlet efficiency, analysis of this section and understanding its flow pattern is necessary before any progress in design phases. The compression surface is designed analytically using oblique shock patterns, which results in a low drag forebody. To study the concept, two inlet–forebody geometries are considered for Computational Fluid Dynamic simulation using ANSYS Fluent code. The supersonic and subsonic performance, effects of angle of attack, sideslip, and duct geometries on the propulsive efficiency of the concept are studied by solving the three-dimensional Navier–Stokes equations in structured cell domains. Comparing the results with the available data from other sources indicates that the aerodynamic efficiency of the concept is acceptable at supersonic and transonic regimes.

A 3D Unsteady Flow Analysis in a Doubly Constricted Tube

2000 ◽  
Author(s):  
B. V. Rathish Kumar ◽  
T. Yamaguchi ◽  
H. Liu ◽  
R. Himeno
Keyword(s):  
Pressure Drop ◽  
Unsteady Flow ◽  
Stokes Equations ◽  
Vortex Formation ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
In Series ◽  
3D Unsteady Flow

Abstract Unsteady flow dynamics in a doubly constricted vessel is analyzed by using a time accurate Finite Volume solution of three dimensional incompressible Navier-Stokes equations. Computational experiments are carried out for various values of Reynolds number in order to assess the criticality of multiple mild constrictions in series and also to bring out the subtle 3D features like vortex formation. Studies reveal that pressure drop across a series of mild constrictions can get physiologically critical. Further this pressure drop is found to be sensitive to the spacing between the constrictions and also to the oscillatory nature of the inflow profile.

Experimental and Numerical Study of Vortex Induced Vibrations on a Spool Model

2018 ◽  
Author(s):  
David Gross ◽  
Yann Roux ◽  
Benjamin Rousse ◽  
François Pétrié ◽  
Ludovic Assier ◽  
...  
Keyword(s):  
Stokes Equations ◽  
Numerical Study ◽  
Fluid Dynamic ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Flow Perturbation ◽  
Industry Standards ◽  
Vortex Induced Vibrations ◽  
Recommended Practices ◽  
Decay Tests

The problem of Vortex-Induced Vibrations (VIV) on spool and jumper geometries is known to present several drawbacks when approached with conventional engineering tools used in the study of VIV on risers. Current recommended practices can lead to over-conservatism that the industry needs to quantify and minimize within notably cost reduction objectives. Within this purpose, the paper will present a brief critical review of the Industry standards and more particularly focus on both experimental and Computational Fluid Dynamic (CFD) approaches. Both qualitative and quantitative comparisons between basin tests and CFD results for a 2D ‘M-shape’ spool model will be detailed. The results presented here are part of a larger experimental and numerical campaign which considered a number of current velocities, heading and geometry configurations. The vibratory response of the model will be investigated for one of the current velocities and compared with the results obtained through recommended practices (e.g. Shear7 and DNV guidelines). The strategy used by the software K-FSI to solve the fluid-structure interaction (FSI) problem is a partitioned coupling solver between fluid solver (FINE™/Marine) and structural solvers (ARA). FINE™/Marine solves the Reynolds-Averaged Navier-Stokes Equations in a conservative way via the finite volume method and can work on structured or unstructured meshes with arbitrary polyhedrons, while ARA is a nonlinear finite element solver with a large displacement formulation. The experiments were conducted in the BGO FIRST facility located in La Seyne sur Mer, France. Particular attention was paid towards the model design, fabrication, instrumentation and characterization, to ensure an excellent agreement between the structural numerical model and the actual physical model. This included the use of a material with low structural damping, the performance of stiffness and decay tests in air and in still water, plus the rationalization of the instrumentation to be able to capture the response with the minimum flow perturbation or interaction due to instrumentation.

scholarly journals Unsteady flow around a two-dimensional section of a vertical axis turbine for tidal stream energy conversion

2009 ◽  
Vol 1 (2) ◽  
Author(s):  
Hyun Ju Jung ◽  
Ju Hyun Lee ◽  
Shin Hyung Rliee ◽  
Museok Song ◽  
Beom-Soo Hyun
Keyword(s):  
Unsteady Flow ◽  
Energy Conversion ◽  
Stokes Equations ◽  
Vertical Axis ◽  
Navier Stokes ◽  
Two Dimensional ◽  
Navier Stokes Equations ◽  
Tidal Stream ◽  
Tidal Stream Energy ◽  
Vertical Axis Turbine

ABSTRACTThe two-dimensional unsteady flow around a vertical axis turbine for tidal stream energy' conversion was investigated using a computational fluid dynamics tool solving the Reynolds-Averaged Navier-Stokes equations. The geometry' of the turbine blade section was NACA653-01S airfoil. The computational analysis was done at several different angles of attack and the results were compared with the corresponding experimental data for validation and calibration. Simulations were then carried out for the two-dimensional cross section of a vertical axis turbine. The simulation results demonstrated the usefulness of the method for the typical unsteady flows around vertical axis turbines. The optimum turbine efficiency was achieved for carefully selected combinations of the number of blades and tip speed ratios.

CFD in the Loop: Ensemble Kalman Filtering With Underwater Mobile Sensor Networks

2014 ◽  
Author(s):  
Axel Hackbarth ◽  
Edwin Kreuzer ◽  
Thorben Schröder
Keyword(s):  
Flow Field ◽  
Stokes Equations ◽  
Fluid Dynamic ◽  
Navier Stokes ◽  
Mobile Sensor ◽  
Dynamic Simulations ◽  
Navier Stokes Equations ◽  
Time Flow ◽  
Strong Current ◽  
Predictive Controller

In marine environments, sparse in-situ measurements can be used for the estimation of the fluid dynamic field. To make best use of a mobile sensor network in an environment whose dynamics can be described by the Navier-Stokes equations, we developed a framework for data assimilation with motion-constrained underwater vehicles, that takes the physical field properties into account while sampling. Our algorithm uses an ensemble Kalman filter that propagates hundreds of slightly varied coarse fluid dynamic simulations through time. Flow and scalar measurements from the mobile sensors are integrated into all ensemble members. We implemented a model predictive controller to calculate covariance minimizing paths from the estimated flow field and motion primitives of the vehicles, which are affected by a strong current. Thereby, we were able to indirectly track dynamically changing wall temperatures through measurements of flow field variables.

Studies on Aerodynamic Characteristics of Dump Diffusers for Modern Aircraft Engines

2012 ◽  
Vol 232 ◽  
pp. 246-251 ◽  
Author(s):  
P. Sathyan ◽  
S. Srikanth ◽  
I. Dheepan ◽  
M. Arun ◽  
C. Aswin ◽  
...  
Keyword(s):  
Stokes Equations ◽  
Numerical Study ◽  
Fluid Dynamic ◽  
Aerodynamic Characteristics ◽  
Navier Stokes ◽  
Finite Volume Scheme ◽  
Aircraft Engines ◽  
Navier Stokes Equations ◽  
Dynamic Constraints ◽  
Fully Implicit

The geometrical optimization of dump diffusers are extremely demanding as the flow fields and stress fields are very complex and must be well understood to achieve the required design efficiencies. In this paper parametric analytical studies have been carried out for examining the aerodynamics characteristics of different dump diffusers for modern aircraft engines. Numerical studies have been carried out using SST K- ω turbulence model. This code solves SST k- ω turbulence equations using the coupled second order implicit unsteady formulation. In the numerical study, a fully implicit finite volume scheme of the compressible, Reynolds-Averaged, Navier-Stokes equations is employed. We concluded that in addition to the dump gap ratio, the aerodynamic shape of the flame tube case and the other geometric variables are also need to be optimized judiciously after considering the fluid dynamic constraints for controlling the pressure recovery and the losses.

Unsteady flow past a rotating circular cylinder at Reynolds numbers 103 and 104

1990 ◽  
Vol 220 ◽  
pp. 459-484 ◽  
Author(s):  
H. M. Badr ◽  
M. Coutanceau ◽  
S. C. R. Dennis ◽  
C. Ménard
Keyword(s):  
Reynolds Number ◽  
Circular Cylinder ◽  
Unsteady Flow ◽  
Rotation Rate ◽  
Stokes Equations ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Number Range ◽  
Flow Past

The unsteady flow past a circular cylinder which starts translating and rotating impulsively from rest in a viscous fluid is investigated both theoretically and experimentally in the Reynolds number range 103 [les ] R [les ] 104 and for rotational to translational surface speed ratios between 0.5 and 3. The theoretical study is based on numerical solutions of the two-dimensional unsteady Navier–Stokes equations while the experimental investigation is based on visualization of the flow using very fine suspended particles. The object of the study is to examine the effect of increase of rotation on the flow structure. There is excellent agreement between the numerical and experimental results for all speed ratios considered, except in the case of the highest rotation rate. Here three-dimensional effects become more pronounced in the experiments and the laminar flow breaks down, while the calculated flow starts to approach a steady state. For lower rotation rates a periodic structure of vortex evolution and shedding develops in the calculations which is repeated exactly as time advances. Another feature of the calculations is the discrepancy in the lift and drag forces at high Reynolds numbers resulting from solving the boundary-layer limit of the equations of motion rather than the full Navier–Stokes equations. Typical results are given for selected values of the Reynolds number and rotation rate.

scholarly journals Numerical and Analytical Study of Fluid Dynamic Forces in Seals and Bearings

1988 ◽  
Vol 110 (3) ◽  
pp. 315-325 ◽  
Author(s):  
L. T. Tam ◽  
A. J. Przekwas ◽  
A. Muszynska ◽  
R. C. Hendricks ◽  
M. J. Braun ◽  
...  
Keyword(s):  
Flow Field ◽  
Stokes Equations ◽  
Fluid Dynamic ◽  
Three Dimensional ◽  
Circumferential Velocity ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Lumped Model ◽  
Destabilizing Factors ◽  
Recirculation Zones

A numerical model based on a transformed, conservative form of the three-dimensional Navier-Stokes equations and an analytical model based on “lumped” fluid parameters are presented and compared with studies of modeled rotor/bearing/seal systems. The rotor destabilizing factors are related to the rotative character of the flow field. It is shown that these destabilizing factors can be reduced through a descrease in the fluid average circumferential velocity. However, the rotative character of the flow field is a complex three-dimensional system with bifurcated secondary flow patterns that significantly alter the fluid circumferential velocity. By transforming the Navier-Stokes equations to those for a rotating observer and using the numerical code PHOENICS-84 with a nonorthogonal body fitted grid, several numerical experiments were carried out to demonstrate the character of this complex flow field. In general, fluid injection and/or preswirl of the flow field opposing the shaft rotation significantly intensified these secondary recirculation zones and thus reduced the average circumferential velocity, while injection or preswirl in the direction of rotation significantly weakened these zones. A decrease in average circumferential velocity was related to an increase in the strength of the recirculation zones and thereby promoted stability. The influence of the axial flow was analyzed. The lumped model of fluid dynamic force based on the average circumferential velocity ratio (as opposed to the bearing/seal coefficient model) well described the obtained results for relatively large but limited ranges of parameters. This lumped model is extremely useful in rotor/bearing/seal system dynamic analysis and should be widely recommended. Fluid dynamic forces and leakage rates were calculated and compared with seal data where the working fluid was bromotrifluoromethane (CBrF3). The radial and tangential force predictions were in reasonable agreement with selected experimental data. Nonsynchronous perturbation provided meaningful information for system lumped parameter identification from numerical experiment data.

Improved κ-ɛ Modelling of Impeller Flow Performance of a Mixed-Flow Pump under off-Design Operating States

1993 ◽  
Vol 207 (4) ◽  
pp. 219-229 ◽  
Author(s):  
S M Fraser ◽  
Y Zhang
Keyword(s):  
Stokes Equations ◽  
Three Dimensional ◽  
Careful Analysis ◽  
Navier Stokes ◽  
Mean Flow ◽  
Mixed Flow ◽  
Navier Stokes Equations ◽  
Flow Through ◽  
The Mean ◽  
Flow Pump

Three-dimensional turbulent flow through the impeller passage of a model mixed-flow pump has been simulated by solving the Navier-Stokes equations with an improved κ-ɛ model. The standard κ-ɛ model was found to be unsatisfactory for solving the off-design impeller flow and a converged solution could not be obtained at 49 per cent design flowrate. After careful analysis, it was decided to modify the standard κ-ɛ model by including the extra rates of strain due to the acceleration of impeller rotation and geometrical curvature and removing the mathematical ill-posedness between the mean flow turbulence modelling and the logarithmic wall function.

Sign in / Sign up

Export Citation Format

Share Document