Performance Analysis and Modeling of Different Volumetric Expanders for Small-Scale Organic Rankine Cycles

2011 ◽  
Author(s):  
Stefano Clemente ◽  
Diego Micheli ◽  
Mauro Reini ◽  
Rodolfo Taccani
Keyword(s):  
Energy Recovery ◽  
Large Scale ◽  
High Efficiency ◽  
Waste Heat ◽  
Low Cost ◽  
Economic Feasibility ◽  
Small Scale ◽  
Main Research ◽  
Energy Field ◽  
Organic Rankine Cycles

In the last years one of the main research topics in energy field is represented by Organic Rankine Cycles (ORCs), due to their applicability in energy recovery from waste heat and in distributed combined heat and power (CHP) generation, particularly in small and micro scale systems. One of the key devices of the cycle is the expander: it must have a limited cost (like all the other components, in order to ensure the economic feasibility), but also a high efficiency, since the temperature of the heat source is often low and then the cycle efficiency is inherently scarce. In the first part of this paper a literature review on various positive-displacement expanders is presented, in order to outline their performances and their application field. Then, the numerical model of a volumetric reciprocating expander is implemented. This model, and another one previously developed to simulate scroll expanders, is combined with a thermodynamic model of the whole ORC system, so that a comparison between the two technologies can be carried out. The results confirm the possibility of realizing small scale energy recovery and cogeneration (CHP) systems with acceptable electrical efficiency also adopting low-cost components, directly derived from large scale industrial components.

scholarly journals Forecast of International Trade of Lithium Carbonate Products in Importing Countries and Small-Scale Exporting Countries

2021 ◽  
Vol 13 (3) ◽  
pp. 1251
Author(s):  
Yichi Zhang ◽  
Zhiliang Dong ◽  
Sen Liu ◽  
Peixiang Jiang ◽  
Cuizhi Zhang ◽  
...  
Keyword(s):  
International Trade ◽  
Large Scale ◽  
Prediction Method ◽  
Lithium Ion ◽  
Lithium Carbonate ◽  
Raw Material ◽  
Small Scale ◽  
Trade Restrictions ◽  
Energy Field ◽  
Structure Of Trade

As the raw material of lithium-ion batteries, lithium carbonate plays an important role in the development of new energy field. Due to the extremely uneven distribution of lithium resources in the world, the security of supply in countries with less say would be greatly threatened if trade restrictions or other accidents occurred in large-scale exporting countries. It is of great significance to help these countries find new partners based on the existing trade topology. This study uses the link prediction method, based on the perspective of the topological structure of trade networks in various countries and trade rules, and eliminates the influence of large-scale lithium carbonate exporting countries on the lithium carbonate trade of other countries, to find potential lithium carbonate trade links among importing and small-scale exporting countries, and summarizes three trade rules: (1) in potential relationships involving two net importers, a relationship involving either China or the Netherlands is more likely to occur; (2) for all potential relationships, a relationship that actually occurred for more than two years in the period in 2009–2018 is more likely to occur in the future; and (3) potential relationships pairing a net exporter with a net importer are more likely to occur than other country combinations. The results show that over the next five to six years, Denmark and Italy, Netherlands and South Africa, Turkey and USA are most likely to have a lithium carbonate trading relationship, while Slovenia and USA, and Belgium and Thailand are the least likely to trade lithium carbonate. Through this study, we can strengthen the supply security of lithium carbonate resources in international trade, and provide international trade policy recommendations for the governments of importing countries and small-scale exporting countries.

scholarly journals 2D Nanomaterials for Effective Energy Scavenging

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Md Al Mahadi Hasan ◽  
Yuanhao Wang ◽  
Chris R. Bowen ◽  
Ya Yang
Keyword(s):  
Large Scale ◽  
Waste Heat ◽  
Material Selection ◽  
Power Supplies ◽  
Small Scale ◽  
Energy Scavenging ◽  
Power Sources ◽  
Practical Applications ◽  
2D Nanomaterials ◽  
Self Powered

AbstractThe development of a nation is deeply related to its energy consumption. 2D nanomaterials have become a spotlight for energy harvesting applications from the small-scale of low-power electronics to a large-scale for industry-level applications, such as self-powered sensor devices, environmental monitoring, and large-scale power generation. Scientists from around the world are working to utilize their engrossing properties to overcome the challenges in material selection and fabrication technologies for compact energy scavenging devices to replace batteries and traditional power sources. In this review, the variety of techniques for scavenging energies from sustainable sources such as solar, air, waste heat, and surrounding mechanical forces are discussed that exploit the fascinating properties of 2D nanomaterials. In addition, practical applications of these fabricated power generating devices and their performance as an alternative to conventional power supplies are discussed with the future pertinence to solve the energy problems in various fields and applications.

1-D Model Analysis of Tesla Turbine for Small Scale Organic Rankine Cycle (ORC) System

2017 ◽  
Author(s):  
Jian Song ◽  
Chun-wei Gu
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Organic Rankine Cycle ◽  
Axial Flow ◽  
Rankine Cycle ◽  
Expansion Ratio ◽  
Working Fluid ◽  
Small Scale ◽  
Low Grade ◽  
D Model

Energy shortage and environmental deterioration are two crucial issues that the developing world has to face. In order to solve these problems, conversion of low grade energy is attracting broad attention. Among all of the existing technologies, Organic Rankine Cycle (ORC) has been proven to be one of the most effective methods for the utilization of low grade heat sources. Turbine is a key component in ORC system and it plays an important role in system performance. Traditional turbine expanders, the axial flow turbine and the radial inflow turbine are typically selected in large scale ORC systems. However, in small and micro scale systems, traditional turbine expanders are not suitable due to large flow loss and high rotation speed. In this case, Tesla turbine allows a low-cost and reliable design for the organic expander that could be an attractive option for small scale ORC systems. A 1-D model of Tesla turbine is presented in this paper, which mainly focuses on the flow characteristics and the momentum transfer. This study improves the 1-D model, taking the nozzle limit expansion ratio into consideration, which is related to the installation angle of the nozzle and the specific heat ratio of the working fluid. The improved model is used to analyze Tesla turbine performance and predict turbine efficiency. Thermodynamic analysis is conducted for a small scale ORC system. The simulation results reveal that the ORC system can generate a considerable net power output. Therefore, Tesla turbine can be regarded as a potential choice to be applied in small scale ORC systems.

scholarly journals Large-Scale Additive Manufacturing for Low Cost Small-Scale Wind Turbine Manufacturing

2020 ◽  
Author(s):  
Brian Post ◽  
Phillip Chesser ◽  
Alex Roschli ◽  
Lonnie Love ◽  
Katherine Gaul
Keyword(s):  
Additive Manufacturing ◽  
Wind Turbine ◽  
Large Scale ◽  
Low Cost ◽  
Small Scale

scholarly journals Variational data assimilation with superparameterization

2015 ◽  
Vol 2 (2) ◽  
pp. 513-536 ◽  
Author(s):  
I. Grooms ◽  
Y. Lee
Keyword(s):  
Data Assimilation ◽  
Large Scale ◽  
Climate Models ◽  
Low Cost ◽  
Ocean Model ◽  
Variational Data Assimilation ◽  
Scale Model ◽  
Small Scale ◽  
New Applications ◽  
Lorenz 96

Abstract. Superparameterization (SP) is a multiscale computational approach wherein a large scale atmosphere or ocean model is coupled to an array of simulations of small scale dynamics on periodic domains embedded into the computational grid of the large scale model. SP has been successfully developed in global atmosphere and climate models, and is a promising approach for new applications. The authors develop a 3D-Var variational data assimilation framework for use with SP; the relatively low cost and simplicity of 3D-Var in comparison with ensemble approaches makes it a natural fit for relatively expensive multiscale SP models. To demonstrate the assimilation framework in a simple model, the authors develop a new system of ordinary differential equations similar to the two-scale Lorenz-'96 model. The system has one set of variables denoted {Yi}, with large and small scale parts, and the SP approximation to the system is straightforward. With the new assimilation framework the SP model approximates the large scale dynamics of the true system accurately.

scholarly journals Low-cost Large Scale Vermicompost Unit

2021 ◽  
Vol 2115 (1) ◽  
pp. 012026
Author(s):  
Sonam Solanki ◽  
Gunendra Mahore
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Small Scale ◽  
Scale Production ◽  
Key Innovation ◽  
Main Challenge ◽  
Long Run ◽  
Large Scale Production ◽  
Term Maintenance

Abstract In the current process of producing vermicompost on a large-scale, the main challenge is to keep the worms alive. This is achieved by maintaining temperature and moisture in their living medium. It is a difficult task to maintain these parameters throughout the process. Currently, this is achieved by building infrastructure but this method requires a large initial investment and long-run maintenance. Also, these methods are limited to small-scale production. For large-scale production, a unit is developed which utilises natural airflow with water and automation. The main aim of this unit is to provide favourable conditions to worms in large-scale production with very low investment and minimum maintenance in long term. The key innovation of this research is that the technology used in the unit should be practical and easy to adopt by small farmers. For long-term maintenance of the technology lesser number of parts are used.

scholarly journals An appraisal of proportional integral control strategies for small scale waste heat to power conversion units based on Organic Rankine Cycles

Energy ◽  
2018 ◽  
Vol 163 ◽  
pp. 1062-1076 ◽  
Author(s):  
Matteo Marchionni ◽  
Giuseppe Bianchi ◽  
Apostolos Karvountzis-Kontakiotis ◽  
Apostolos Pesyridis ◽  
Savvas A. Tassou
Keyword(s):  
Waste Heat ◽  
Control Strategies ◽  
Power Conversion ◽  
Small Scale ◽  
Integral Control ◽  
Proportional Integral ◽  
Organic Rankine Cycles ◽  
Proportional Integral Control

Solar Upgrading of Fuels for Generation of Electricity

2001 ◽  
Vol 123 (2) ◽  
pp. 160-163 ◽  
Author(s):  
Rainer Tamme ◽  
Reiner Buck ◽  
Michael Epstein ◽  
Uriyel Fisher ◽  
Chemi Sugarmen
Keyword(s):  
Gas Turbines ◽  
Large Scale ◽  
Fossil Fuels ◽  
High Efficiency ◽  
Combined Cycle ◽  
Test Facility ◽  
Small Scale ◽  
Start Up ◽  
Efficiency Conversion ◽  
Solar Field

This paper presents a novel process comprising solar upgrading of hydrocarbons by steam reforming in solar specific receiver-reactors and utilizing the upgraded, hydrogen-rich fuel in high efficiency conversion systems, such as gas turbines or fuel cells. In comparison to conventionally heated processes about 30% of fuel can be saved with respect to the same specific output. Such processes can be used in small scale as a stand-alone system for off-grid markets as well as in large scale to be operated in connection with conventional combined-cycle plants. The complete reforming process will be demonstrated in the SOLASYS project, supported by the European Commission in the JOULE/THERMIE framework. The project has been started in June 1998. The SOLASYS plant is designed for 300 kWel output, it consists of the solar field, the solar reformer and a gas turbine, adjusted to operate with the reformed gas. The SOLASYS plant will be operated at the experimental solar test facility of the Weizmann Institute of Science in Israel. Start-up of the pilot plant is scheduled in April 2001. The midterm goal is to replace fossil fuels by renewable or non-conventional feedstock in order to increase the share of renewable energy and to establish processes with only minor or no CO2 emission. Examples might be upgrading of bio-gas from municipal solid waste as well as upgrading of weak gas resources.

Conversion of Syngas From Biomass in Solid Oxide Fuel Cells

2006 ◽  
Author(s):  
Ju¨rgen Karl ◽  
Nadine Frank ◽  
Sotiris Karellas ◽  
Mathilde Saule ◽  
Ulrich Hohenwarter
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Liquid Metal ◽  
Waste Heat ◽  
Heat Pipes ◽  
Economic Feasibility ◽  
Small Scale ◽  
Cell Systems ◽  
Exhaust Heat ◽  
Integrated Gasification

Conversion of biomass in syngas by means of indirect gasification offers the option to improve the economic situation of any fuel cell systems due to lower costs for feedstock and higher power revenues in many European countries. The coupling of an indirect gasification of biomass and residues with highly efficient SOFC systems is therefore a promising technology for reaching economic feasibility of small decentralized combined heat and power production (CHP). The predicted efficiency of common high temperature fuel cell systems with integrated gasification of solid feedstock is usually significantly lower than the efficiency of fuel cells operated with hydrogen or methane. Additional system components like the gasifier, as well as the gas cleaning reduce this efficiency. Hence common fuel cell systems with integrated gasification of biomass will hardly reach electrical efficiencies above 30 percent. An extraordinary efficient combination is achieved in case that the fuel cells waste heat is used in an indirect gasification system. A simple combination of a SOFC and an allothermal gasifier enables then electrical efficiencies above 50%. But this systems requires an innovative cooling concept for the fuel cell stack. Another significant question is the influence of impurities on the fuel cells degradation. The European Research Project ‘BioCellus’ focuses on both questions — the influence of the biogenious syngas on the fuel cells and an innovative cooling concept based on liquid metal heat pipes. First experiments showed that in particular higher hydrocarbons — the so-called tars — do not have an significant influence on the performance of SOFC membranes. The innovative concept of the TopCycle comprises to heat an indirect gasifier with the exhaust heat of the fuel cell by means of liquid metal heat pipes. Internal cooling of the stack and the recirculation of waste heat increases the system efficiency significantly. This concept promises electrical efficiencies of above 50 percent even for small-scale systems without any combined processes.

Sign in / Sign up

Export Citation Format

Share Document