Performance Comparisons of Solar Desalination Devices and Processes

2012 ◽  
Author(s):  
Masoud Modaresifar ◽  
Mansour Zenouzi ◽  
Gregory J. Kowalski
Keyword(s):  
Numerical Simulation ◽  
Water Vapor ◽  
Numerical Analysis ◽  
Mass Balance ◽  
Common Assumption ◽  
Solar Desalination ◽  
Passive Solar ◽  
Physical Components ◽  
Performance Comparisons

Numerical analysis of two passive solar desalination designs, the traditional pool evaporation design and the proposed tray design are performed. The significance of common assumption for the pool evaporation design that neglect the mass balance and psychrometric relationships for the air-water vapor volume were investigated and found that neglecting this component results in over predicting the freshwater production by 32.6% and 19.5% for the summer and winter design day, respectively. It was also found that the tray design produced 31.3 % and 7% more freshwater per summer and winter design day, respectively. These results support the need to include all physical components in the numerical simulation. The results also support the tray design as producing significantly more freshwater for the same input.

scholarly journals Numerical Analysis of Thermal Performances for a Novel Cascade Solar Desalination Still Design

2019 ◽  
Vol 157 ◽  
pp. 1071-1082 ◽  
Author(s):  
M. Bouzaid ◽  
O. Ansari ◽  
M. Taha-Janan ◽  
N. Mouhsin ◽  
M. Oubrek
Keyword(s):  
Numerical Analysis ◽  
Solar Desalination

Simulation of a Free Standing Riser Model and Validation With Experimental Results

2014 ◽  
Author(s):  
Marcio Yamamoto ◽  
Sotaro Masanobu ◽  
Satoru Takano ◽  
Shigeo Kanada ◽  
Tomo Fujiwara ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Numerical Analysis ◽  
Previous Experiment ◽  
Numerical Results ◽  
Experimental Results ◽  
Previous Article ◽  
Scale Model ◽  
Analysis Software ◽  
Free Standing ◽  
Reduced Scale

In this article, we present the numerical analysis of a Free Standing Riser. The numerical simulation was carried out using a commercial riser analysis software suit. The numerical model’s dimensions were the same of a 1/70 reduced scale model deployed in a previous experiment. The numerical results were compared with experimental results presented in a previous article [1]. Discussion about the model and limitations of the numerical analysis is included.

Vibro-Stone Column Reinforcement Mechanism and Numerical Analysis

2012 ◽  
Vol 446-449 ◽  
pp. 1940-1943
Author(s):  
Yang Liu ◽  
Hong Xiang Yan
Keyword(s):  
Numerical Simulation ◽  
Numerical Analysis ◽  
Pore Pressure ◽  
Numerical Procedure ◽  
Numerical Results ◽  
Excess Pore Pressure ◽  
Stone Column ◽  
Reinforcement Mechanism ◽  
Consolidation Theory ◽  
Excess Pore

Numerical simulation of vibro-stone column is taken to simulate the installation of vibro-stone column. A relationship based on test is adopted to calculate the excess pore pressure induced by vibratory energy during the installation of vibro-stone column. A numerical procedure is developed based on the formula and Terzaghi-Renduric consolidation theory. Finally numerical results of composite stone column are compared single stone column.

On Numerical Simulation of the Stepped Soil-Nail Wall

2013 ◽  
Vol 353-356 ◽  
pp. 692-695
Author(s):  
Chang Zhi Zhu ◽  
Quan Chen Gao
Keyword(s):  
Numerical Simulation ◽  
Numerical Analysis ◽  
Internal Force ◽  
Numerical Results ◽  
Analysis Model ◽  
Foundation Pit ◽  
Soil Nails ◽  
Soil Nail ◽  
Soil Nail Wall ◽  
Design And Construction

Based on an Engineering Example which was supported by the stepped soil-nail wall, a numerical analysis model was established by FLAC3D,and the process of the excavation and supporting was simulated, and the numerical results of the soil nails internal force and foundation pit deformation were obtained. The simulated result was consistent with the measured results. It shows that the method of FLAC3D numerical analysis can be used to the numerical analysis of foundation pit excavation and supporting, and it will provide the basis for the design and construction of practice project.

Evaluation of Motorized Rotating Pancake Coil Probe Signals Simulated by Numerical Analysis in Steam Generator Tubes

2006 ◽  
Vol 321-323 ◽  
pp. 451-454
Author(s):  
Joo Young Yoo ◽  
Sung Jin Song ◽  
Chang Hwan Kim ◽  
Hee Jun Jung ◽  
Young Hwan Choi ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Numerical Analysis ◽  
Steam Generator ◽  
Integral Method ◽  
Volume Integral ◽  
Analysis Software ◽  
Steam Generator Tubes ◽  
Calibration Tool ◽  
High Possibility ◽  
Good Agreement

In the present study, the synthetic signals from the combo tube are simulated by using commercial electromagnetic numerical analysis software which has been developed based on a volume integral method. A comparison of the simulated signals to the experiments is made for the verification of accuracy, and then evaluation of five deliberated single circumferential indication signals is performed to explore a possibility of using a numerical simulation as a practical calibration tool. The good agreement between the evaluation results for two cases (calibration done by experiments and calibration made by simulation) demonstrates such a high possibility.

Numerical Analysis for Bolt Length Based on the Stress Response of Anchorage Surrounding Rock

2012 ◽  
Vol 204-208 ◽  
pp. 4481-4485
Author(s):  
Bin Wang ◽  
Fu Jun Zhao ◽  
Wen Bin Peng
Keyword(s):  
Numerical Simulation ◽  
Stress Response ◽  
Numerical Analysis ◽  
Bearing Capacity ◽  
Distribution Curve ◽  
Surrounding Rock ◽  
Effective Length ◽  
Plastic Failure ◽  
Deep Rock ◽  
Peak Value

The current researches on bolt length are rarely concerned with self-bearing characteristics of anchorage surrounding rock，its stress response is seldom used to analyze the bolt effective length. Tangential stress σθ of surrounding rock is sensitive to mechanical variation of surrounding rock plastic failure fields. When surrounding rock bolted, the distribution curve of σθ presents internal and external peak values from the surface rock to the deep rock, which is verified by numerical simulation. Internal peak value of σθ curve increases with the bolt length, which means the bearing capacity of surrounding rock in plastic failure division is improved, correspondingly, external peak value decreases which shows the supporting behavior of the deep rock is weakened. The results of numerical simulations prove that there exists an effective value of bolt length. If bolt length beyond it, the bearing capacity of anchorage surrounding rock cannot be improved obviously.

Numerical Analysis of Shockwave Propagation in Urban Underpass

2012 ◽  
Vol 13 (2) ◽  
pp. 201-207
Author(s):  
Xin Li ◽  
Zhihua Wang ◽  
Guiying Wu
Keyword(s):  
Numerical Simulation ◽  
Numerical Analysis ◽  
Traffic Congestion ◽  
Traffic Accidents ◽  
Peak Pressure ◽  
Near Field ◽  
Horizontal Direction ◽  
Pressure Distributions ◽  
Blast Effects ◽  
Potential Damage

Abstract As an indispensable part of transportation system, urban underpass can alleviate traffic congestion and reduce traffic accidents effectively. In order to acquaint the hydrodynamics of shockwave in underpass and assess the potential damage and risk of bombing accidents, a numerical simulation was established to calculate the blast effects originating from the 13Kg TNT. Based on the location of detonation point, the shape of corridor section and the exit's cover, peak pressure distributions were predicted. The results indicate that the propagation of shockwave in horizontal direction switches to the inclined top of ground in a near-field due to the ground reflection and the set of exit's cover increases the risk of explosion to the structure and the users.

Sign in / Sign up

Export Citation Format

Share Document