Coupled Modelling of a “Flow-Piping” System in Dynamic Analysis

2006 ◽  
Author(s):  
Peter S. Vasilyev
Keyword(s):  
Finite Element ◽  
Seismic Analysis ◽  
Response Spectrum ◽  
Time History ◽  
Mode Shapes ◽  
Coupled Analysis ◽  
Feed Water ◽  
Piping System ◽  
Coupled Modelling ◽  
Basic Fluid

The paper considers the problem of simultaneous modeling of structure and flow in a piping system. It takes a middle road between full coupled analysis on the one hand, and the simplified case of treating the liquid as a rigid mass. The suggested method allows the use of standard beam and rod elements for the analysis. Two approaches to the problem of dynamic interaction between pipe and medium are compared in the given paper: 1) The first one treats medium as mass rigidly connected to the pipe finite-element model’s nodes. 2) In the second one medium is modeled by the finite-element system of rod-elements. In this case the basic fluid-structure interaction (FSI) effects are taken into account. The main techniques for FE modeling of some pipeline elements are presented in the paper. The second approach can be implemented by the use of general purpose FE programs. A model of a feed water pipeline of VVER-440 type NPP has been developed to study how the FSI affects on pipeline response. The results of the analysis which allow estimation of inaccuracy arising from medium dynamics neglecting are as follows: • calculation of eigen frequency and mode shapes; • seismic analysis using the response-spectrum method; • accidental blast impact assessment with the use of time history analysis; • operating vibration assessment on the basis of harmonic analysis. It has become apparent that the way of medium modeling has an essential influence on the dynamic behavior of pipelines.

A Parametric Study of Independent Support Motion Method for the Steam Supply Piping Connected to the HP Turbine of APR 1400

2013 ◽  
Author(s):  
Dae Soo Kim ◽  
Joon Ho Lee ◽  
In Yeung Kim
Keyword(s):  
High Pressure ◽  
Power Plant ◽  
Support Groups ◽  
Seismic Analysis ◽  
Response Spectrum ◽  
Time History ◽  
Nuclear Industry ◽  
Combination Method ◽  
Piping System ◽  
Support Motion

The steam supply piping connected to the high pressure (HP) turbine of APR1400 (Korea’s advanced power plant 1400 MW-class) is a typical example of multi-supported piping system, and it is routed from the Containment building to the Turbine building via the Main Steam Isolation Valve House in the Auxiliary building. In the seismic analysis of this piping system, using the Enveloped Response Spectrum (ERS) method, a commonly used methodology for seismic analysis of nuclear power plant piping in industry circles, generates overly conservative analysis results. Therefore, Time History Method (THM) which applies excitation characteristic of each support attached to individual building was used to eliminate unnecessary conservatism. However, it was noticed that the Time History Method requires considerable amount of labor and time in generating combined time history equivalent to the spectrum applied for each support although it is regarded as the most exact and realistic method for seismic analysis. The nuclear industry has been making lots of efforts in finding out the mathematic logicality and practical applicability to resolve this issue. This paper deals with parametric research on combination effects of responses between support groups, damping effects, and modal combination method with close modes in applying the Independent Support Motion (ISM) method to the analysis model of the steam supply piping connected to the high pressure turbine of APR1400. Quantitative assessment and comparison with the analysis results of the ERS method and THM were also carried out. As a result, it is shown that the analysis results of the ISM method together with the SRSS combination between support groups, 4% damping with ±15% spectrum peak broadening and grouping of modal combination are remarkably similar to those of THM.

Sensitivity of the Effective Seismic Support Damping in a Class I Piping System to Analysis Parameters

2009 ◽  
Author(s):  
Nima Zobeiry
Keyword(s):  
Seismic Analysis ◽  
Response Spectrum ◽  
Time History ◽  
Class I ◽  
Piping System ◽  
Frequency Content ◽  
Response Spectrum Analysis ◽  
History Analysis ◽  
The Coefficient Of Friction ◽  
Seismic Damping

It is understood that the level of seismic damping in a piping system is strongly influenced by the supports. Put differently, the supports contribute to an effective damping that can be considered in the seismic analysis of the piping system. This paper investigates the issue for the feeder pipes of a CANDU™ reactor. Feeders are numerous class I pipes in parallel, which are separated by frictional spacer elements. The results of a time history analysis, taking into account different damping mechanisms, are compared to those from a response spectrum analysis to deduce the effective damping in the system. The sensitivity of the effective damping to different parameters, such as the coefficient of friction and the input frequency content, is investigated.

Floor Response Spectrum Method of Multiply Supported Piping System Assisted by Time History Analysis

2020 ◽  
Author(s):  
Yoshihiro Takayama ◽  
Ayaka Yoshida ◽  
Iriki Nobuyoshi ◽  
Eiichi Maeda
Keyword(s):  
Seismic Analysis ◽  
Response Spectrum ◽  
Time History ◽  
Correlation Coefficients ◽  
Time History Analysis ◽  
Piping System ◽  
Response Spectrum Method ◽  
Sum Rule ◽  
Spectrum Method ◽  
History Analysis

Abstract The independent support motion response spectrum method (ISM) is currently used for seismic analysis to calculate the response of multiply supported piping with independent inputs of support excitations. This approach may derive considerable overestimation in the combination of group responses under the absolute sum rule of NUREG-1061 [1]. Then authors have developed an advanced method of the ISM approach named SATH (Spectrum Method Assisted by Time History Analysis). In the SATH method, both of floor response spectra and time histories of floor acceleration are used as independent inputs of support excitations. The group responses are summed with correlation coefficients which are calculated by considering each time history of modal response by independent inputs of support excitations. In this paper, the necessity of taking the effects of correlation coefficients for the group responses into account in the ISM approach is examined. The SATH method has advantage to derive a more realistic sum rule of the group responses and applicability for the actual design.

Structural design and seismic qualification of extra high voltage disconnect switch

1986 ◽  
Vol 13 (4) ◽  
pp. 485-497
Author(s):  
R. Kar
Keyword(s):  
Finite Element ◽  
High Voltage ◽  
Structural Design ◽  
Response Spectrum ◽  
Time History ◽  
Element Model ◽  
Mode Shapes ◽  
Element Analysis ◽  
Extra High Voltage ◽  
Disconnect Switch

This paper describes the structural design approach and the method of seismic qualification for an extra high voltage disconnect switch, a vital component in the substations of a power system network. Shaping and sizing of porcelain members of the frame received special attention to enhance their resistance to earthquake. A carefully developed finite element model, on analysis by response spectrum and time-history methods, showed acceptable seismic performance and an adequate margin of safety. Shake table tests for seismic qualification, called for by the specification, were not feasible owing to the large dimensions of the complete assembly. The alternative approach was to perform in situ modal tests. By exciting the structure with a random force through a portable hydraulic exciter and using accelerometers to record the structural response, the dynamic characteristics of the equipment — the frequencies, mode shapes, and damping — were determined. Correlation between the results of finite element analysis and experimental modal analysis confirmed the validity of the analytical model. Application of combined analysis and testing for seismic qualification is demonstrated by a case study on an 800 kV disconnect switch.

Seismic Analysis of a High Rise Antique-Style Pagoda with Steel Reinforced Concrete Composite Structure

2016 ◽  
Vol 851 ◽  
pp. 733-738
Author(s):  
Zi Chun Zhou ◽  
Hong Gang Lei
Keyword(s):  
Finite Element ◽  
Seismic Analysis ◽  
Response Spectrum ◽  
Time History ◽  
Analysis Method ◽  
Response Spectrum Analysis ◽  
Steel Reinforced Concrete ◽  
High Rise ◽  
Finite Element Software ◽  
History Analysis

In this paper, we analyze the dynamic and seismic performance of a high rise antique-style pagoda by using the response spectrum analysis and the time history analysis method, which are implemented in finite element software. The result of our system can provide a reference to the structural designer to ensure the structure of such architecture meets the seismic fortification requirements.

Design Applicability of the Advanced Spectrum Method Assisted by Time History Analysis for Multiply Supported Piping System

2020 ◽  
Author(s):  
Ayaka Yoshida ◽  
Yoshihiro Takayama ◽  
Hiromichi Shudo
Keyword(s):  
Seismic Analysis ◽  
Response Spectrum ◽  
Time History ◽  
Response Spectra ◽  
Time History Analysis ◽  
Piping System ◽  
Acceleration Time ◽  
Spectrum Method ◽  
History Analysis ◽  
Acceleration Time Histories

Abstract The independent support motion response spectrum method (ISM) is currently used for seismic analysis to calculate the response of multiply supported piping system with independent inputs of support excitations. This approach may derive considerable overestimation in the combination of group responses under the absolute sum rule of NUREG-1061. To reduce the excessive overestimation, an advanced method named “Spectrum Method Assisted by Time History Analysis (SATH)” has been proposed. In the SATH method, modal responses by multiple excitations are combined with correlation coefficients which are calculated from the covariances and the standard deviations of time history responses of the oscillators having each of modal frequencies of piping system by each of the floor acceleration time history excitations. In this paper, the applicability of the SATH method to actual design which uses broadened Floor Response Spectra (FRS) was examined. Conservativeness of the SATH method is also discussed with presenting that responses derived from the SATH method tend to exceed responses by the time history analysis even when many different time intervals of acceleration time histories are used within the range of the FRS broadening.

Measured natural periods of concrete shear wall buildings: insights for the design of Canadian buildings

2012 ◽  
Vol 39 (8) ◽  
pp. 867-877 ◽  
Author(s):  
Damien Gilles ◽  
Ghyslaine McClure
Keyword(s):  
Seismic Analysis ◽  
Dynamic Properties ◽  
Response Spectrum ◽  
Shear Wall ◽  
Mode Shapes ◽  
Design Stage ◽  
Base Shear ◽  
Period Equation ◽  
Input Load ◽  
Structural Engineers

Structural engineers routinely use rational dynamic analysis methods for the seismic analysis of buildings. In linear analysis based on modal superposition or response spectrum approaches, the overall response of a structure (for instance, base shear or inter-storey drift) is obtained by combining the responses in several vibration modes. These modal responses depend on the input load, but also on the dynamic characteristics of the building, such as its natural periods, mode shapes, and damping. At the design stage, engineers can only predict the natural periods using eigenvalue analysis of structural models or empirical equations provided in building codes. However, once a building is constructed, it is possible to measure more precisely its dynamic properties using a variety of in situ dynamic tests. In this paper, we use ambient motions recorded in 27 reinforced concrete shear wall (RCSW) buildings in Montréal to examine how various empirical models to predict the natural periods of RCSW buildings compare to the periods measured in actual buildings under ambient loading conditions. We show that a model in which the fundamental period of RCSW buildings varies linearly with building height would be a significant improvement over the period equation proposed in the 2010 National Building Code of Canada. Models to predict the natural periods of the first two torsion modes and second sway modes are also presented, along with their uncertainty.

scholarly journals Approach for Selection of Rayleigh Damping Parameters Used for Time History Analysis

2012 ◽  
Vol 134 (6) ◽  
Author(s):  
R. E. Spears ◽  
S. R. Jensen
Keyword(s):  
Seismic Analysis ◽  
Time History ◽  
System Response ◽  
Piping System ◽  
Nuclear Facilities ◽  
Rayleigh Damping ◽  
Modal Damping ◽  
American Society ◽  
Selection Of ◽  
Civil Engineers

Nonlinearities, whether geometric or material, need to be addressed in seismic analysis. One good analysis method that can address these nonlinearities is direct time integration with Rayleigh damping. Modal damping is the damping typically specified in seismic analysis Codes and Standards (ASCE 4-98, 1998, “Seismic Analysis of Safety-Related Nuclear Structures and Commentary,” American Society of Civil Engineers, Reston, Virginia and ASCE/SEI 43-05, 2005, “Seismic Design Criteria for Structures, Systems, and Components in Nuclear Facilities,” American Society of Civil Engineers, Reston, Virginia.). Modal damping is constant for all frequencies where Rayleigh damping varies with frequency. An approach is proposed here for selection of Rayleigh damping coefficients to be used in seismic analyses that is consistent with given modal damping. The approach uses the difference between the modal damping response and the Rayleigh damping response along with effective mass properties of the model being evaluated to match overall system response levels. This paper provides a simple example problem to demonstrate the approach. It also provides results for a finite element model representing an existing piping system. Displacement, acceleration, and stress results are compared from model runs using modal damping and model runs using Rayleigh damping with coefficients selected using the proposed method.

scholarly journals Review on Seismic Analysis of Multistoried Building in Hilly Region

2021 ◽  
Vol 9 (12) ◽  
pp. 73-79
Author(s):  
Harsh Joshi
Keyword(s):  
Seismic Analysis ◽  
Response Spectrum ◽  
Center Of Mass ◽  
Time History ◽  
Lateral Loads ◽  
Base Shear ◽  
Building Frames ◽  
Building Frame ◽  
History Analysis ◽  
Hilly Region

Abstract: Due to sloping land and high seismically active zones, designing and construction of multistory buildings in hilly regions is always a challenge for structural engineers. This review paper focuses to establish a review study on the Possible Types of building frame configuration in the hilly region and he behavior of Such building frames under seismic loading conditions, and (3) The recent research and developments to make such frames less vulnerable to earthquakes. This paper concludes that the dynamics characteristics of such buildings are significantly different in both horizontal and vertical directions, resulting in the center of mass and center of stiffness having eccentricity at point of action and not vertically aligned for different floors. When such frames are subjected to lateral loads, due to eccentricity it generates torsion in the frame. Most of the studies agree that the buildings resting on slanting ground have higher displacement and base shear compared to buildings resting on plain ground and the shorter column attracts more forces and undergoes damage when subjected to earthquake. Keywords: Building frame configuration, Seismic behavior, Dynamic characteristics, Response spectrum analysis, time history analysis.

Investigation on Effect of Analysis Variables on Structural Integrity of the Nuclear Piping Under Beyond Design Basis Earthquake

2017 ◽  
Author(s):  
Jong-Sung Kim ◽  
Suk-Hyun Lee ◽  
Hyeong Do Kweon
Keyword(s):  
Finite Element ◽  
Structural Integrity ◽  
Seismic Analysis ◽  
Time History ◽  
Time History Analysis ◽  
Design Basis ◽  
History Analysis ◽  
Study Results ◽  
Transition Length ◽  
Dynamic Time

In this study, effect of analysis variables on structural integrity of nuclear piping under beyond design basis earthquake was investigated via performing dynamic time history seismic analysis. A finite element model of the piping system such as shut-down cooling line was developed combining solid and beam elements. Dynamic time history analysis was performed via finite element elastic plastic stress analysis. Validity of the dynamic time history analysis procedure was verified via comparing with the previous study results. Finally, the effect of analysis variables such as finite element characteristics, transition length between elbow and straight line, fluid effect, etc. was investigated via performing parametric dynamic time history seismic analysis. As a result, it was found that use of the 1st incompatible element is recommended, the transition length is the same as curvature of the elbow, and fluid has to be considered.

Sign in / Sign up

Export Citation Format

Share Document