Unsteady Modeling of Powdered Activated Carbon Deposition on Collection Electrode of a Lab-Scale Electrostatic Precipitator (ESP)

2012 ◽  
Author(s):  
Yasmin Khakpour ◽  
Herek L. Clack
Keyword(s):  
Activated Carbon ◽  
Particle Deposition ◽  
Electrostatic Precipitator ◽  
Activated Carbons ◽  
Collection Efficiency ◽  
Continuous Phase ◽  
Powdered Activated Carbon ◽  
Computational Domain ◽  
Discrete Phase Model ◽  
Discrete Phase

Particulate sampling in the flue gas at the Electrostatic Precipitator (ESP) outlet during injection of powdered activated carbons (PACs) has provided strong anecdotal evidence indicating that injected PACs can penetrate the ESP in significant concentrations. The low resistivity of PAC is consistent with poor collection efficiency in an ESP and lab-scale testing has revealed significantly different collection behavior of PAC in an ESP as compared to fly ash. The present study illustrates the use of a commercial CFD package — FLUENT — to investigate precipitation of powdered activated carbon (PAC) in the presence and absence of electric field. The computational domain is designed to represent a 2-D wire-plate ESP channel. The governing equations include those covering continuous phase transport, electric potential, air ionization, and particle charging. The particles are tracked using a Lagrangian Discrete Phase Model (DPM). In addition, a custom user-defined function (UDF) uses a deforming boundary condition and a prescribed critical particle velocity to account for particle deposition and dust-cake growth on the electrodes. The effect of Electrohydrodynamics (EHD) induced flow on the ESP collection efficiency under various flow and particle characteristics as well as different ESP configurations are illustrated.

scholarly journals Study on Performance of Mesoscopic Impactor Filters for Aerosol Removal

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Wei Zhang ◽  
Fenglei Niu ◽  
Shiji Wang ◽  
Haonan Wang ◽  
Zhangpeng Guo
Keyword(s):  
Collection Efficiency ◽  
Fluid Dynamic ◽  
Structural Parameters ◽  
Continuous Phase ◽  
Discrete Phase Model ◽  
Discrete Phase ◽  
Small Flow ◽  
Cfd Method ◽  
Working Parameters ◽  
Design And Manufacture

The mesoscopic impactor filter is designed to filtrate aerosols in the containment, which has not only high collection efficiency but also small flow resistance. In this paper, the influence of structural parameters and working parameters of the inertial impactor on collection performance is studied by the computational fluid dynamic (CFD) method. Under the small Reynolds number, the laminar model is used to simulate the continuous phase, and the discrete phase model (DPM) is used to track the trajectory of the particle. Based on the response surface methodology (RSM), the prediction model of collection efficiency and pressure drop is obtained, which will provide a reference for the design and manufacture of the filter in the future.

scholarly journals Effects of Blade Parameters on the Flow Field and Classification Performance of the Vertical Roller Mill via Numerical Investigations

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Chang Liu ◽  
Zuobing Chen ◽  
Weili Zhang ◽  
Chenggang Yang ◽  
Ya Mao ◽  
...  
Keyword(s):  
Flow Field ◽  
Pressure Difference ◽  
Continuous Phase ◽  
Classification Performance ◽  
Field Analysis ◽  
Discrete Phase Model ◽  
Roller Mill ◽  
Discrete Phase ◽  
Vertical Roller ◽  
Classification Efficiency

The vertical roller mill is an important crushing and grading screening device widely used in many industries. Its classification efficiency and the pressure difference determine the entire producing capacity and power consumption, respectively, which makes them the two key indicators describing the mill performance. Based on the DPM (Discrete Phase Model) and continuous phase coupling model, the flow field characteristics in the vertical roller mill including the velocity and pressure fields and the discrete phase distributions had been analyzed. The influence of blade parameters like the shape, number, and rotating speed on the flow field and classification performance had also been comprehensively explored. The numerical simulations showed that there are vortices in many zones in the mill and the blades are of great significance to the mill performance. The blade IV not only results in high classification efficiency but also reduces effectively the pressure difference in the separator and also the whole machine. The conclusions of the flow field analysis and the blade effects on the classification efficiency and the pressure difference could guide designing and optimizing the equipment structure and the milling process, which is of great importance to obtain better overall performance of the vertical roller mill.

CFD Study on must of Grapes Separation in a Hydrocyclone

2013 ◽  
Vol 837 ◽  
pp. 645-650
Author(s):  
Petru Cârlescu ◽  
Ioan Tenu ◽  
Marius Baetu ◽  
Radu Rosca
Keyword(s):  
Cfd Simulation ◽  
Reynolds Stress Model ◽  
Continuous Phase ◽  
Solid Particles ◽  
Advanced Degree ◽  
Separation And Purification ◽  
Discrete Phase Model ◽  
Flow Rates ◽  
Discrete Phase ◽  
Simulation And Experiment

Abstract. Hydrocyclones are increasingly used in the food industry for various separation and purification. In this paper, an optimization was made to design a hydrocyclone model using CFD (Computational Fluid Dynamics). CFD simulation is performed with FLUENT software by coupling the Reynolds Stress Model (RSM) for must of grapes flow with Discrete Phase Model (DPM) for solid particles trajectory. Coupling of discrete phase (particles) and continuous phase (must of grapes) in the mathematical model is set so that the continuous phase to influence discrete phase. Tracking particles traiectory in this hydrocyclone allows advanced degree is separation so obtained to the maximum particle size approaching the size of a yeast cell 10 μm, without separating them. Hydrocyclone dimensional designed simulation was performed and analyzed on an experimental pilot plant for three different must flow rates supply. Introduced particle flow rates simulation and experiment does not exceed 10% of the must flow rates. The degree of separation obtained is in agreement with experimental data.

scholarly journals The influence of vapor on the particle transport in high humid neighborhood environment

2021 ◽  
Vol 2076 (1) ◽  
pp. 012043
Author(s):  
Dan Mei ◽  
Xuemei Xu
Keyword(s):  
Particle Transport ◽  
Street Canyon ◽  
Saturated Vapor ◽  
Flow Characteristics ◽  
Absolute Humidity ◽  
Neighborhood Environment ◽  
Computational Domain ◽  
Discrete Phase Model ◽  
Discrete Phase ◽  
Velocity Pressure

Abstract The particle transport characteristics have a significant effect on the exposure of residents and pedestrians to traffic pollutants in the street canyon. Around the lakeside environment, the diffusion of water vapor affects the flow characteristics of the gas mixture, which has a considerable influence on particle transport in the street canyon. A computational domain containing water bodies from which droplets were emitted by evaporation, a lakeside avenue and architectural groups were constructed. The RNG k-ε turbulence model and discrete phase model were applied to study the velocity, pressure, density of the airflow and particle transport characteristics in the street canyon with the absolute humidity increase (AHI) of 0, 3.8×10-4 g/kg, 1.7×10-3 g/kg, 3.1×10-3 g/kg. The saturated vapor pressure on the surface of droplets was modified by the pressure correction equation, which can limit the evaporation rate of the droplets. The simulation results demonstrated that, the diffusion of vapor could reduce the airflow velocity and increase the air pressure and density. The particle concentration in the street canyon increased with the AHI. Most of the pathogens in the air are transmitted with the flow of particle, and the study has some guiding significance to prevent the transmission of viruses.

A Numerical Study of Particle Deposition Through Fuel Pebble Bed in HTGR

2018 ◽  
Author(s):  
Qi Sun ◽  
Gang Zhao ◽  
Wei Peng ◽  
Suyuan Yu
Keyword(s):  
Particle Deposition ◽  
Numerical Study ◽  
Three Dimensional ◽  
Intensity Change ◽  
Discrete Phase Model ◽  
Pebble Bed ◽  
Deposition Fraction ◽  
Discrete Phase ◽  
Face Centered ◽  
Fuel Elements

The study on the deposition of graphite dust is significant to the safety of High-Temperature Gas-cooled Reactor (HTGR) due to potential accident such as localized hot-spots and intensity change which is caused by the graphite dust generated by abrasion of fuel elements. Based on the steady flow and three-dimensional face centered structures of fuel pebble bed, the discrete phase model (DPM) were applied to simulate trajectory of graphite dust in conditions of HTGR. To determinate the deposition of particle, the present study introduces a rebound condition with critical velocity by a user defined function. The particle trajectories show most of particle deposition can be summed up as the effect of backflow region, turbulent diffusion and inertial impact. The original trap condition overestimates the deposition fraction especially for large particles compared with involving rebound condition. In addition, the trend of deposition fraction shows as the dimeter of particle increases, deposition fraction decreases first and then increases.

Numerical Simulation of Steam Generator Tube Rupture Sequence in ADS Reactor

2014 ◽  
Author(s):  
Xu Yang ◽  
Tao Zhou ◽  
Daping Lin ◽  
Xiaolu Fang ◽  
Baixu Chen ◽  
...  
Keyword(s):  
Steam Generator ◽  
Continuous Phase ◽  
Discrete Phase Model ◽  
Primary Coolant ◽  
Steam Generator Tube ◽  
Spallation Target ◽  
Steel Material ◽  
Stainless Steel Material ◽  
Discrete Phase ◽  
Secondary Side

In ADS reactor which choose LBE (Lead-Bismuth Eutectic) as coolant and spallation target. While SGTR (Steam Generator Tube Rupture) accident occur, water in secondary side will inject to LBE in primary coolant, and flow with LBE. The code of FLUENT will be used, steam is looked as particle, and standard k-ε model is used to predict turbulence variation of continuous phase in core. The DPM (Discrete Phase Model) will be used to track the trajectory of the particles. The distribution of steam in core will be obtained, which will verify the safety of reactor. The results show that the steam flowing across the core with LBE, might accumulate in some position and cause a surge of power. At the same time, the aggregation of steam at the channel might lead to a steam plug, and hinder the flow of the coolant in core, then core overheating might occur. Last but not least, local accumulation of water vapor may accelerate the corrosion of stainless steel material in core.

Simulating Fine Particle Deposition in Coolant Channel of Fast Reactor

2017 ◽  
Author(s):  
Yaoxin Wang ◽  
Tao Zhou ◽  
Bing Li
Keyword(s):  
Fuel Assembly ◽  
Fast Reactor ◽  
Particle Deposition ◽  
Fluid Phase ◽  
Fixed Time ◽  
Mitigation Measures ◽  
Fuel Cladding ◽  
Discrete Phase Model ◽  
Discrete Phase ◽  
Fluent Software

When fast reactor is operation, because of scouring by high pressure liquid coolant in fuel assembly, there are a lot of products in coolant channel. Using FLUENT software simulate deposition of insoluble particle in fast reactor. Using standard k-ε model predict flow field and turbulence intensity of fluid phase. Using discrete phase model track the trajectory of insoluble particle. The following are simulation results. Fuel cladding deposits lots of insoluble particle, but the concentration of insoluble particle is lower at the central of coolant; Entrance section of the insoluble particle concentration is higher than exit section; Dot deposition of insoluble particle at outlet of fuel cladding will lead to pitting phenomenon, pitting will cause deterioration of heat transfer and destroy the integrity of cladding. In view of deposition law of insoluble particle and characteristic of fuel assembly, mitigation measures of cleaning insoluble particle at fixed time and fixed position are being proposed.

Aerodynamic Characteristics of NACA 23015 Landing Configuration with 20o Flap in Simulated Rain

2014 ◽  
Vol 555 ◽  
pp. 108-112
Author(s):  
Shahid Latif ◽  
Zhou Hong ◽  
Muhammad Ismail
Keyword(s):  
Heavy Rain ◽  
Aerodynamic Characteristics ◽  
Continuous Phase ◽  
Phase Flow ◽  
Discrete Phase Model ◽  
Two Phase ◽  
Discrete Phase Modeling ◽  
Wall Film ◽  
Discrete Phase ◽  
Simulated Rain

In our numerical simulation the heavy rain effects have been studied on the aerodynamic performance of 2D cambered NACA 23015 airfoil landing configuration with 20o. We have used preprocessing software gridgen for creation of the landing configuration of the airfoil and then creating mesh around it. Fluent is used to solve the conservation equations. We have used discrete phase modeling (DPM) in Fluent to simulate the rain phenomenon in continuous phase flow by using two phase flow approach. In our study the coupling between the discrete and the continuous phase has been activated. In discrete phase model (DPM), we used the wall film model for the interaction of the continuous and discrete phase. The airfoil landing configuration exhibited significant decrease in lift and increase in drag for a given lift conditions in simulated rain. Post processing software like MATLAB, Tec plot and Origin are used to see the effects of the heavy rain and then results obtained are compared with the experimental results. Our numerical results in most of cases show similar trends with the experiments.

scholarly journals Strategies for recovering inhibition caused by phenolic compounds in a short-cut nitrogen removal reactor treating coal gasification wastewater

2015 ◽  
Vol 5 (4) ◽  
pp. 569-578 ◽  
Author(s):  
Qian Zhao ◽  
Hongjun Han ◽  
Fang Fang ◽  
Haifeng Zhuang ◽  
Dexin Wang ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Phenolic Compounds ◽  
Nitrogen Removal ◽  
Coal Gasification ◽  
Activated Carbons ◽  
Powdered Activated Carbon ◽  
Nitrifying Bacteria ◽  
Quick Recovery ◽  
Coal Gasification Wastewater ◽  
Biological Nitrogen

Different strategies, including extension of hydraulic retention time (HRT), dilution, and addition of powdered activated carbon (PAC) and super-powdered activated carbon (S-PAC), were investigated for the quick recovery of nitrifying bacteria activity from the inhibition of coal gasification wastewater (CGW). A laboratory-scale short-cut biological nitrogen removal (SBNR) reactor treating CGW, achieving high levels (90%) of nitrogen removal, was used. After a shock of phenolic compounds (around 250 mg/L) and a failed performance, the results of the batch recovery tests indicated that the PAC and S-PAC addition were the best recovery strategies. In the SBNR reactor, the addition of 1 g/L PAC and S-PAC shortened the recovery time from the natural recovery of 32 days to 13 days and 10 days, respectively. Fluorescence in situ hybridization (FISH) assay and the adsorption isotherms revealed that activated carbons absorbed phenolic compounds, reducing the toxicity and allowing for the quick recovery of SBNRs treating CGW. S-PAC showed greater adsorption capacity for phenol than PAC.

Sign in / Sign up

Export Citation Format

Share Document