Effect of Scaling of Blade Row Sectors on the Prediction of Aerodynamic Forcing in a Highly-Loaded Transonic Compressor Stage

2009 ◽  
Author(s):  
Mari´a A. Mayorca ◽  
Jesu´s A. De Andrade ◽  
Damian M. Vogt ◽  
Hans Ma˚rtensson ◽  
Torsten H. Fransson
Keyword(s):  
Second Harmonic ◽  
Harmonic Excitation ◽  
Navier Stokes ◽  
Test Case ◽  
Moderate Amount ◽  
Object A ◽  
Transonic Compressor ◽  
Geometrical Scaling ◽  
Direct Indication ◽  
Generalized Force

An investigation of the sensitivity of a geometrical scaling technique on the blade forcing prediction and mode excitability has been performed. A stage of a transonic compressor is employed as test object. A scaling ratio is defined which indicates the amount of scaling from the original geometry. Different scaling ratios are selected and 3D Navier Stokes unsteady calculations completed for each scaled configuration. A full annulus calculation (non-scaled) is performed serving as reference. The quantity of interest is the generalized force, which gives a direct indication of the mode excitability. In order to capture both up- and downstream excitation effects the mode excitability has been assessed on both rotor and stator blades. The results show that first harmonic excitation can be predicted well for both up- and downstream excitation using moderate amount of scaling. On the other hand, the predictions of second harmonic quantities do show a higher sensitivity to scaling for the investigated test case.

Effect of Scaling of Blade Row Sectors on the Prediction of Aerodynamic Forcing in a Highly Loaded Transonic Compressor Stage

2010 ◽  
Vol 133 (2) ◽  
Author(s):  
María A. Mayorca ◽  
Jesús A. De Andrade ◽  
Damian M. Vogt ◽  
Hans Mårtensson ◽  
Torsten H. Fransson
Keyword(s):  
Second Harmonic ◽  
Harmonic Excitation ◽  
Navier Stokes ◽  
Test Case ◽  
Object A ◽  
Transonic Compressor ◽  
Geometrical Scaling ◽  
Direct Indication ◽  
Generalized Force ◽  
Higher Sensitivity

An investigation of the sensitivity of a geometrical scaling technique on the blade forcing prediction and mode excitability has been performed. A stage of a transonic compressor is employed as a test object. A scaling ratio is defined, which indicates the amount of scaling from the original geometry. Different scaling ratios are selected and 3D Navier–Stokes unsteady calculations completed for each scaled configuration. A full-annulus calculation (nonscaled) is performed serving as reference. The quantity of interest is the generalized force, which gives a direct indication of the mode excitability. In order to capture both up- and downstream excitation effects, the mode excitability has been assessed on both rotor and stator blades. The results show that the first harmonic excitation can be predicted well for both up- and downstream excitations using moderate amounts of scaling. On the other hand, the predictions of second harmonic quantities do show a higher sensitivity to scaling for the investigated test case.

scholarly journals Comparison of ω-Based Turbulence Models for Simulating Separated Flows in Transonic Compressor Cascades

1998 ◽  
Author(s):  
Tom C. Currie
Keyword(s):  
Turbulence Models ◽  
Separated Flow ◽  
Adverse Pressure Gradient ◽  
Reynolds Stress Model ◽  
Separated Flows ◽  
Navier Stokes ◽  
Test Case ◽  
Turbulent Dissipation ◽  
Transonic Compressor ◽  
Scale Variable

Separated flows in the DLR transonic compressor cascades TSG-91-8K and TSG-89-5 are simulated with a quasi-3D Navier-Stokes code using the zonal k-ω/k-ϵ “Shear Stress Transport” two-equation turbulence model of Menter and the multiscale Reynolds stress model of Wilcox. Both of these models use the specific turbulent dissipation rate ω as the length scale variable. The models are also used to simulate the low speed, separated flow, adverse pressure gradient test case of Driver. While both models predict results which are in good agreement with experiment for the latter test case, they yield relatively poor results, particularly for losses, for the cascade test cases, especially TSG-89-5 where separation occurs from both the suction and pressure surfaces. It is known from the cascade test results that the separations are laminar, so some improvement in agreement is achieved by suppressing transition to the separation points in the simulations. The poor accuracy of the models is believed to be related to severe non-equilibrium of turbulence production and dissipation predicted after the shock-induced separations.

Multiscale Partially Averaged Navier Stokes Approach for the Prediction of Flow in Linear Compressor Cascade With Moving Casing

2011 ◽  
Author(s):  
Domenico Borello ◽  
Giovanni Delibra ◽  
Franco Rispoli
Keyword(s):  
Turbulence Models ◽  
Navier Stokes ◽  
Test Case ◽  
Compressor Cascade ◽  
Preliminary Assessment ◽  
Linear Compressor ◽  
Tip Leakage ◽  
Experimental Campaign ◽  
Elliptic Relaxation ◽  
Linear Compressor Cascade

In this paper we present an innovative Partially Averaged Navier Stokes (PANS) approach for the simulation of turbomachinery flows. The elliptic relaxation k-ε-ζ-f model was used as baseline Unsteady Reynolds Averaged Navier Stokes (URANS) model for the derivation of the PANS formulation. The well established T-FlowS unstructured finite volume in-house code was used for the computations. A preliminary assessment of the developed formulation was carried out on a 2D hill flow that represents a very demanding test case for turbulence models. The turbomachinery flow here investigated reproduces the experimental campaign carried out at Virginia Tech on a linear compressor cascade with tip leakage. Their measurements were used for comparisons with numerical results. The predictive capabilities of the model were assessed through the analysis of the flow field. Then an investigation of the blade passage, where experiments were not available, was carried out to detect the main loss sources.

URANS Studies of Effect of Eccentricity on Ship–Lock Interactions

2016 ◽  
Vol 13 (04) ◽  
pp. 1641012
Author(s):  
Qingjie Meng ◽  
Decheng Wan
Keyword(s):  
Viscous Flow ◽  
Hydrodynamic Interaction ◽  
Vertical Displacement ◽  
Navier Stokes ◽  
Test Case ◽  
The Third ◽  
Surface Pressure Distribution ◽  
Sst Turbulence Model ◽  
Unsteady Viscous Flow ◽  
Ship Lock

The unsteady viscous flow around a 12000TEU ship model entering the Third Set of Panama Locks with different eccentricity is simulated by solving the unsteady Reynolds averaged Navier–Stokes (RANS) equations in combination with the [Formula: see text]SST turbulence model. Overset grid technology is utilized to maintain grid orthogonality and the effects of the free surface are taken into account. The hydrodynamic forces, vertical displacement as well as surface pressure distribution are predicted and analyzed. First, a benchmark test case is designed to validate the capability of the present methods in the prediction of the viscous flow around the ship when maneuvering into the lock. The accumulation of water in front of the ship during entry into a lock is noticed. A set of systematic computations with different eccentricity are then carried out to examine the effect of eccentricity on the ship–lock hydrodynamic interaction.

Flow Field Unsteadiness in the Tip Region of a Transonic Compressor Rotor

1997 ◽  
Vol 119 (1) ◽  
pp. 122-128 ◽  
Author(s):  
S. L. Puterbaugh ◽  
W. W. Copenhaver
Keyword(s):  
Flow Field ◽  
High Performance ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Vortex Interaction ◽  
Tip Leakage Vortex ◽  
Tip Leakage ◽  
Transonic Compressor ◽  
Compressor Rotor ◽  
Operating Points

An experimental investigation concerning tip flow field unsteadiness was performed for a high-performance, state-of-the-art transonic compressor rotor. Casing-mounted high frequency response pressure transducers were used to indicate both the ensemble averaged and time varying flow structure present in the tip region of the rotor at four different operating points at design speed. The ensemble averaged information revealed the shock structure as it evolved from a dual shock system at open throttle to an attached shock at peak efficiency to a detached orientation at near stall. Steady three-dimensional Navier Stokes analysis reveals the dominant flow structures in the tip region in support of the ensemble averaged measurements. A tip leakage vortex is evident at all operating points as regions of low static pressure and appears in the same location as the vortex found in the numerical solution. An unsteadiness parameter was calculated to quantify the unsteadiness in the tip cascade plane. In general, regions of peak unsteadiness appear near shocks and in the area interpreted as the shock-tip leakage vortex interaction. Local peaks of unsteadiness appear in mid-passage downstream of the shock-vortex interaction. Flow field features not evident in the ensemble averaged data are examined via a Navier-Stokes solution obtained at the near stall operating point.

The Extension of a Solution-Adaptive Three-Dimensional Navier–Stokes Solver Toward Geometries of Arbitrary Complexity

1993 ◽  
Vol 115 (2) ◽  
pp. 283-295 ◽  
Author(s):  
W. N. Dawes
Keyword(s):  
Guide Vane ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Centrifugal Impeller ◽  
Transonic Compressor ◽  
Compressor Rotor ◽  
Wide Range ◽  
Nozzle Guide Vane ◽  
Recent Developments ◽  
Nozzle Guide

This paper describes recent developments to a three-dimensional, unstructured mesh, solution-adaptive Navier–Stokes solver. By adopting a simple, pragmatic but systematic approach to mesh generation, the range of simulations that can be attempted is extended toward arbitrary geometries. The combined benefits of the approach result in a powerful analytical ability. Solutions for a wide range of flows are presented, including a transonic compressor rotor, a centrifugal impeller, a steam turbine nozzle guide vane with casing extraction belt, the internal coolant passage of a radial inflow turbine, and a turbine disk cavity flow.

Longitudinal Aerodynamics of a Canard Guided Spin Stabilized Projectile

2012 ◽  
Vol 443-444 ◽  
pp. 719-723
Author(s):  
Xiu Ling Ji ◽  
Hai Peng Wang ◽  
Shi Ming Zeng ◽  
Chen Yang Jia
Keyword(s):  
Normal Force ◽  
Navier Stokes ◽  
Test Case ◽  
Aerodynamic Coefficients ◽  
Number Range ◽  
Detailed Understanding ◽  
Pitch Moment ◽  
Spinning Projectile ◽  
Mach 3 ◽  
Viable Approach

Navier–Stokes simulation is performed on a canard guided spinning projectile for different attack angles and circumferential position angles of canard over the Mach number range of 1.8–2.2. The computational Magnus moment coefficients of test case are validated with available experimental data of a Secant-Ogive-Cylinder-Boattail (SOCBT) configuration at Mach 3, demonstrating that the method can provide an accurate and viable approach for this problem. The aim of the present study is to provide a detailed understanding of the effects of canard with different circumferential position angles on longitudinal aerodynamic coefficients at three supersonic speeds and various angles of attack. And the results show that normal force coefficients and pitch moment coefficients vary periodically with the circumferential position angles of canard.

Aerodynamic Design Optimization of an Axial Flow Compressor Rotor

2002 ◽  
Author(s):  
Chan-Sol Ahn ◽  
Kwang-Yong Kim
Keyword(s):  
Design Optimization ◽  
Response Surface ◽  
Computing Time ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Axial Flow ◽  
Navier Stokes ◽  
Transonic Compressor ◽  
Compressor Rotor ◽  
Design Variables

Design optimization of a transonic compressor rotor (NASA rotor 37) using the response surface method and three-dimensional Navier-Stokes analysis has been carried out in this work. The Baldwin-Lomax turbulence model was used in the flow analysis. Three design variables were selected to optimize the stacking line of the blade. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, adiabatic efficiency was successfully improved. It was found that the optimization process provides reliable design of a turbomachinery blade with reasonable computing time.

Influencing Parameters of Tip Blowing Interacting With Rotor Tip Flow

2016 ◽  
Vol 139 (2) ◽  
Author(s):  
Cyril Guinet ◽  
André Inzenhofer ◽  
Volker Gümmer
Keyword(s):  
Geometric Model ◽  
Axial Compressor ◽  
Axial Flow ◽  
Navier Stokes ◽  
Axial Position ◽  
Design Parameters ◽  
Stall Margin ◽  
Casing Treatment ◽  
Transonic Compressor ◽  
Casing Treatments

The design space of axial-flow compressors is restricted by stability issues. Different axial-type casing treatments (CTs) have shown their ability to enhance compressor stability and to influence efficiency. Casing treatments have proven to be effective, but there still is need for more detailed investigations and gain of understanding for the underlying flow mechanism. Casing treatments are known to have a multitude of effects on the near-casing 3D flow field. For transonic compressor rotors, these are more complex, as super- and subsonic flow regions alternate while interacting with the casing treatment. To derive design rules, it is important to quantify the influence of the casing treatment on the different tip flow phenomena. Designing a casing treatment in a way that it antagonizes only the deteriorating secondary flow effects can be seen as a method to enhance stability while increasing efficiency. The numerical studies are carried out on a tip-critical rotor of a 1.5-stage transonic axial compressor. The examined recirculating tip blowing casing treatment (TBCT) consists of a recirculating channel with an air off-take above the rotor and an injection nozzle in front of the rotor. The design and functioning of the casing treatment are influenced by various parameters. A variation of the geometry of the tip blowing, more specifically the nozzle aspect ratio, the axial position, or the tangential orientation of the injection port, was carried out to identify key levers. The tip blowing casing treatment is defined as a parameterized geometric model and is automatically meshed. A sensitivity analysis of the respective design parameters of the tip blowing is carried out on a single rotor row. Their impact on overall efficiency and their ability to improve stall margin are evaluated. The study is carried out using unsteady Reynolds-averaged Navier–Stokes (URANS) simulations.

CFD Computation of Fan Interaction Noise

2007 ◽  
Author(s):  
Sheryl M. Grace ◽  
Douglas L. Sondak ◽  
Daniel J. Dorney ◽  
Michaela Logue
Keyword(s):  
Surface Pressure ◽  
Second Harmonic ◽  
Guide Vane ◽  
Power Level ◽  
Broadband Noise ◽  
Rotor Blades ◽  
Navier Stokes ◽  
Fan Noise ◽  
Guide Vanes ◽  
Blade Passage

In this study, a 3-D, unsteady, Reynolds-averaged Navier-Stokes (RANS) CFD code coupled to an acoustic calculation is used to predict the contribution of the exit guide vanes to tonal fan noise downstream. The configuration investigated is that corresponding to the NASA Source Diagnostic Test (SDT) 22-in fan rig. One configuration from the SDT matrix is considered here: the approach condition, and outlet guide vane count designed for cut-off of the blade passage frequency. In this chosen configuration, there are 22 rotor blades and 54 stator blades. The stators are located 2.5 tip chords downstream of the rotor trailing edge. The RANS computations are used to obtain the spectra of the unsteady surface pressure on the exit guide vanes. The surface pressure at the blade passage frequency and its second harmonic are then integrated together with the Green’s function for an annular duct to obtain the pressure at locations in the duct. Comparison of the computed sound power level at the exhaust plane with experiment show good agreement at the cut-on circumferential mode. The results from this investigation validate the use of the CFD code along with the acoustic model for downstream fan noise predictions. This validation enables future investigations such as the effect of duct variation on the exhaust tonal power level and the validity of using this method for predicting broadband noise levels.

Sign in / Sign up

Export Citation Format

Share Document