Analysis of the Rotating Arc Spark Plug in a Natural Gas Engine

2005 ◽  
Author(s):  
Jim Tassitano ◽  
James E. Parks
Keyword(s):  
Natural Gas ◽  
Fuel Efficiency ◽  
Cost Effective ◽  
Combustion Stability ◽  
Engine Operation ◽  
Gas Engine ◽  
Natural Gas Engines ◽  
Natural Gas Engine ◽  
Spark Plug ◽  
Rotating Arc

Large natural gas engines are durable and cost-effective generators of power for distributed energy applications. Fuel efficiency is an important aspect of distributed generation since operating costs associated with fuel consumption are the major component of energy cost on a life-cycle basis; furthermore, higher fuel efficiency results in lower CO2 emissions. Leaner operation of natural gas engines can result in improved fuel efficiency; however, engine operation becomes challenging at leaner air-to-fuel ratios due to several factors. One factor in combustion control is ignition. At lean air-fuel mixtures, reliable and repeatable ignition is necessary to maintain consistent power production from the engine, and spark plug quality and durability play an important role in reliability of ignition. Here research of a novel spark plug design for lean natural gas engines is presented. The spark plug is an annular gap spark plug with a permanent magnet that produces a magnetic field that forces the spark to rotate during spark discharge. The rotating arc spark plug (RASP) has the potential to improve ignition system reliability and durability. In the study presented here, the RASP plug was operated in a small natural gas engine, and combustion stability (measured by the coefficient of variation of indicated mean effective pressure (IMEP)) was measured as a function of air-to-fuel ratio to characterize the ignition performance at lean mixtures. Comparisons were made to a standard J-plug spark plug.

Experimental Investigations of Hydrogen-Natural Gas Engines for Maritime Applications

2018 ◽  
Author(s):  
Harsh D. Sapra ◽  
Youri Linden ◽  
Wim van Sluijs ◽  
Milinko Godjevac ◽  
Klaas Visser
Keyword(s):  
Fuel Cell ◽  
Natural Gas ◽  
Combustion Stability ◽  
Experimental Investigations ◽  
Gas Engine ◽  
Natural Gas Engines ◽  
Natural Gas Engine ◽  
Hydrogen Addition ◽  
Ship Propulsion ◽  
Operating Window

A novel ship propulsion concept employs natural gas to reduce ship emissions and improve overall ship propulsion efficiency. This concept proposes a serial integration of Solid Oxide Fuel Cell (SOFC) and a natural gas engine, while anode-off gas (gas at the fuel cell exhaust) is used in the natural gas engine. This study focusses on SOFC-gas engine integration by experimentally analyzing the effects of adding hydrogen, which is the main combustible component of the fuel cell anode-off gas, in marine natural gas engines. The overall challenge is to employ the anode-off gas to improve the performance of marine natural gas engines. To study the effects of anode-off gas combustion in natural gas engines, experiments with hydrogen addition in a marine natural gas engine of 500 kW rated power were performed. Natural gas was replaced with 10 % and 20 % of hydrogen, by volume, without any penalties in terms of output power. We found that the high combustion rate of hydrogen improved combustion stability, which allowed for better air-excess ratio control. Thus allowing leaning to higher air-excess ratios and extending the, otherwise, limited operating window. Hydrogen addition also improved brake thermal efficiency by 1.2 %, while keeping NOx emissions below the maritime emission regulations. The improvement in engine efficiency with a larger operating window may help improve the load-taking capabilities of marine natural gas engines.

Development of an Open Path Laser Ignition System for a Large Bore Natural Gas Engine: Part 2 — Single Cylinder Demonstration

2005 ◽  
Author(s):  
David L. Ahrens ◽  
Daniel B. Olsen ◽  
Azer P. Yalin
Keyword(s):  
Natural Gas ◽  
Combustion Stability ◽  
Electrode Erosion ◽  
Laser Ignition ◽  
Engine Test ◽  
Test Results ◽  
Ignition System ◽  
Gas Engine ◽  
Natural Gas Engine ◽  
Spark Plug

Using a laser, as opposed to a conventional (electrical) spark plug, to create a combustion initiating spark is potentially advantageous for several reasons: flexibility in choosing and optimizing the spark location, in particular to move the spark away from solid heat sinks; production of a more robust spark containing more energy; and obviation of electrode erosion problems. In this paper we present the on-engine test results of the laser ignition system on a large bore natural gas engine. Test results include: mass fraction burn duration, hydrocarbon emissions data, and combustion stability comparisons to the conventional spark plug ignition system. Design and spark location considerations for the laser ignition system were presented in the first paper of this two-paper series.

Ignition System Designed to Extend the Plug Life, and the Lean Limit in a Natural Gas Engine

2003 ◽  
Author(s):  
A. K. Chan ◽  
S. H. Waters
Keyword(s):  
Natural Gas ◽  
Engine Performance ◽  
Ignition System ◽  
Gas Engine ◽  
Natural Gas Engine ◽  
Dc System ◽  
Spark Plug ◽  
Long Duration ◽  
Discharge Duration ◽  
Lean Limit

An ignition system that is based on the alternating (AC) rather than the traditional direct (DC) current in the spark plug discharge has been developed at the Caterpillar Technical Center. This system can generate a long duration discharge with controllable power. It is believed that such an ignition system can provide both a leaner operating limit and a longer spark plug life than a traditional DC system due to the long discharge duration and the low discharge power. The AC ignition system has successfully been tested on a Caterpillar single cylinder G3500 natural gas engine to determine the effects on the engine performance, combustion characteristics and emissions. The test results indicate that while the AC ignition system has only a small impact on engine performance (with respect to a traditional DC system), it does extend the lean limit with lower NOx emissions. Evidences also show the potential of reduce spark plug electrode erosions from the low breakdown and sustaining discharge powers from the AC ignition system. This paper summarizes the prototype design and engine demonstration results of the AC ignition system.

Railplug Design Optimization to Improve Large-Bore Natural Gas Engine Performance

2005 ◽  
Author(s):  
Hongxun Gao ◽  
Matt J. Hall ◽  
Ofodike A. Ezekoye ◽  
Ron D. Matthews
Keyword(s):  
Natural Gas ◽  
High Energy ◽  
Parameter Study ◽  
Transfer Model ◽  
High Speed Photography ◽  
Discharge Process ◽  
Ignition System ◽  
Gas Engine ◽  
Natural Gas Engines ◽  
Natural Gas Engine

It is a very challenging problem to reliably ignite extremely lean mixtures, especially for the low speed, high load conditions of stationary large-bore natural gas engines. If these engines are to be used for the distributed power generation market, it will require operation with higher boost pressures and even leaner mixtures. Both place greater demands on the ignition system. The railplug is a very promising ignition system for lean burn natural gas engines with its high-energy deposition and high velocity plasma jet. High-speed photography was used to study the discharge process. A heat transfer model is proposed to aid the railplug design. A parameter study was performed both in a constant volume bomb and in an operating natural gas engine to improve and optimize the railplug designs. The engine test results show that the newly designed railplugs can ensure the ignition of very lean natural gas mixtures and extend the lean stability limit significantly. The new railplug designs also improve durability.

Evaluation of Spark Plug and Timing Configurations on the Fuel Consumption, Combustion Stability, and Emissions of a Large-Bore, Two-Stroke, Natural Gas Engine

2016 ◽  
Author(s):  
Derek Johnson ◽  
Marc Besch ◽  
Nathaniel Fowler ◽  
Robert Heltzel ◽  
April Covington
Keyword(s):  
Natural Gas ◽  
Fuel Consumption ◽  
Combustion Engine ◽  
Engine Performance ◽  
Combustion Stability ◽  
Oxides Of Nitrogen ◽  
Natural Gas Engines ◽  
Fuel Delivery ◽  
Spark Plug ◽  
Trade Offs

Emissions compliance is a driving factor for internal combustion engine research pertaining to both new and old technologies. New standards and compliance requirements for off-road spark ignited engines are currently under review and include greenhouse gases. To continue operation of legacy natural gas engines, research is required to increase or maintain engine efficiency, while reducing emissions of carbon monoxide, oxides of nitrogen, and volatile organic compounds such as formaldehyde. A variety of technologies can be found on legacy, large-bore natural gas engines that allow them to meet current emissions standards — these include exhaust after-treatment, advanced ignition technologies, and fuel delivery methods. The natural gas industry uses a variety of spark plugs and tuning methods to improve engine performance or decrease emissions of existing engines. The focus of this study was to examine the effects of various spark plug configurations along with spark timing to examine any potential benefits. Spark plugs with varied electrode diameter, number of ground electrodes, and heat ranges were evaluated against efficiency and exhaust emissions. Combustion analyses were also conducted to examine peak firing pressure, location of peak firing pressure, and indicated mean effective pressure. The test platform was an AJAX-E42 engine. The engine has a bore and stroke of 0.216 × 0.254 meters (m), respectively. The engine displacement was 9.29 liters (L) with a compression ratio of 6:1. The engine was modified to include electronic spark plug timing capabilities along with a mass flow controller to ensure accurate fuel delivery. Each spark plug configuration was examined at ignition timings of 17, 14, 11, 8, and 5 crank angle degrees before top dead center. The various configurations were examined to identify optimal conditions for each plug comparing trade-offs among brake specific fuel consumption, oxides of nitrogen, methane, formaldehyde, and combustion stability.

Experimental study of combustion strategy for jet ignition on a natural gas engine

2020 ◽  
pp. 146808742097775
Author(s):  
Ziqing Zhao ◽  
Zhi Wang ◽  
Yunliang Qi ◽  
Kaiyuan Cai ◽  
Fubai Li
Keyword(s):  
Experimental Study ◽  
Natural Gas ◽  
Efficient Points ◽  
Lean Burn ◽  
Gas Engine ◽  
Absolute Value ◽  
Natural Gas Engines ◽  
Natural Gas Engine ◽  
Excess Air ◽  
Lean Limit

To explore a suitable combustion strategy for natural gas engines using jet ignition, lean burn with air dilution, stoichiometric burn with EGR dilution and lean burn with EGR dilution were investigated in a single-cylinder natural gas engine, and the performances of two kinds of jet ignition technology, passive jet ignition (PJI) and active jet ignition (AJI), were compared. In the study of lean burn with air dilution strategy, the results showed that AJI could extend the lean limit of excess air ratio (λ) to 2.1, which was significantly higher than PJI’s 1.6. In addition, the highest indicated thermal efficiency (ITE) of AJI was shown 2% (in absolute value) more than that of PJI. Although a decrease of NOx emission was observed with increasing λ in the air dilution strategy, THC and CO emissions increased. Stoichiometric burn with EGR was proved to be less effective, which can only be applied in a limited operation range and had less flexibility. However, in contrast to the strategy of stoichiometric burn with EGR, the strategy of lean burn with EGR showed a much better applicability, and the highest ITE could achieve 45%, which was even higher than that of lean burn with air dilution. Compared with the most efficient points of lean burn with pure air dilution, the lean burn with EGR dilution could reduce 78% THC under IMEP = 1.2 MPa and 12% CO under IMEP = 0.4 MPa. From an overall view of the combustion and emission performances under both low and high loads, the optimum λ would be from 1.4 to 1.6 for the strategy of lean burn with EGR dilution.

Development of an Open Path Laser Ignition System for a Large Bore Natural Gas Engine: Part 1 — System Design

2005 ◽  
Author(s):  
David L. Ahrens ◽  
Azer P. Yalin ◽  
Daniel B. Olsen ◽  
Gi-Heon Kim
Keyword(s):  
Natural Gas ◽  
Pollutant Emissions ◽  
Electrode Erosion ◽  
Laser Ignition ◽  
Ignition System ◽  
Gas Engine ◽  
Natural Gas Engine ◽  
Spark Plug ◽  
Engine Part ◽  
Beam Delivery

Using a laser, as opposed to a conventional (electrical) spark plug, to create a combustion initiating spark is potentially advantageous for several reasons: flexibility in choosing and optimizing the spark location, in particular to move the spark away from solid heat sinks; production of a more robust spark containing more energy; and obviation of electrode erosion problems. These advantages may lead to an extension of the lean limit, an increase in engine thermal efficiency, and the concomitant benefits of reduced pollutant emissions. This paper presents the design of a laser ignition system appropriate for a large bore natural gas engine. Design considerations include: optimization of spark location, design of beam delivery system and optical plug, and mitigation of vibration and thermal effects. Engine test results will be presented in the second paper of this two-paper series.

Sign in / Sign up

Export Citation Format

Share Document