Metal Surface Wettability Manipulation by Nanoparticle Deposition During Nanofluid Boiling

2015 ◽  
Author(s):  
Feini Zhang ◽  
Anthony M. Jacobi
Keyword(s):  
Heat Transfer ◽  
Metal Surface ◽  
Deposition Process ◽  
Surface Wettability ◽  
Thermal Processes ◽  
Nanoparticle Concentration ◽  
Substrate Roughness ◽  
Nanoparticle Suspension ◽  
Nanoparticle Deposition ◽  
The Impact

Surface wettability of materials is important in heat transfer and thermal processes at micro-scale. This paper presents the manipulation of metal surface wettability by nanofluid boiling nanoparticle deposition. As confirmed by microscopy, particles can be deposited on metal surfaces by boiling in nanoparticle suspension, which significantly enhanced the surface wettabiliy relative to that of its original condition. The change in wettability is coupled to boiling conditions, such as nanoparticle concentration, heat flux, boiling duration, substrate roughness and so on. It has been observed that the higher the concentration of nanoparticles in the liquid during the boiling deposition process, the more pronounced the impact on wetting. Hence, surface wettability can be manipulated by controlling the nanoparticle concentration during the nanofluid boiling nanoparticle deposition (NBND) process. Such method can potentially be applied to enhance the heat transfer performance in thermal devices.

scholarly journals Nanofluid Thermal Conductivity and Effective Parameters

2018 ◽  
Vol 9 (1) ◽  
pp. 87 ◽  
Author(s):  
Sarah Simpson ◽  
Austin Schelfhout ◽  
Chris Golden ◽  
Saeid Vafaei
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Nanoparticle Concentration ◽  
Effective Parameters ◽  
Conductivity Enhancement ◽  
Nanoparticle Shape ◽  
Hybrid Nanofluids ◽  
Different Characteristics ◽  
The Impact ◽  
Base Liquid

Due to the more powerful and miniaturized nature of modern devices, conventional heat-transfer working fluids are not capable of meeting the cooling needs of these systems. Therefore, it is necessary to improve the heat-transfer abilities of commonly used cooling fluids. Recently, nanoparticles with different characteristics have been introduced to base liquids to enhance the overall thermal conductivity. This paper studies the influence of various parameters, including base liquid, temperature, nanoparticle concentration, nanoparticle size, nanoparticle shape, nanoparticle material, and the addition of surfactant, on nanofluid thermal conductivity. The mechanisms of thermal conductivity enhancement by different parameters are discussed. The impact of nanoparticles on the enhanced thermal conductivity of nanofluids is clearly shown through plotting the thermal conductivities of nanofluids as a function of temperature and/or nanoparticle concentration on the same graphs as their respective base liquids. Additionally, the thermal conductivity of hybrid nanofluids, and the effects of the addition of carbon nanotubes on nanofluid thermal conductivity, are studied. Finally, modeling of nanofluid thermal conductivity is briefly reviewed.

Interfacial Heat Transfer During Droplet Impact on a Solid Surface: Comparison of High-Resolution Laser Measurements With Finite-Element Simulations

2007 ◽  
Author(s):  
Rajneesh Bhardwaj ◽  
Jon P. Longtin ◽  
Daniel Attinger
Keyword(s):  
Heat Transfer ◽  
Fluid Dynamics ◽  
Finite Element ◽  
High Speed ◽  
Element Model ◽  
Deposition Process ◽  
Interfacial Heat Transfer Coefficient ◽  
Interfacial Heat Transfer ◽  
Laser Measurements ◽  
The Impact

The objective of this work is to understand the coupling of fluid dynamics and heat transfer during the impact of a millimeter-size water droplet on a flat, solid glass substrate. In this work, a finite-element model is presented which simulates the transient fluid dynamics and heat transfer during the droplet deposition process, considering Laplace forces on the liquid-gas boundary, and the dynamics of wetting. A novel, experimental laser-based method is used to measure temperatures at the solid-liquid interface. This method is based on a thermoreflectance technique and provides unprecedented temporal and spatial resolutions of 1 microsecond and 20 micrometer, respectively. Matching between simulations, temperature measurements and high-speed visualization allows the determination of the interfacial heat transfer coefficient.

Flow Boiling Dynamics of Water and Nanofluids in a Single Microchannel at Different Heat Fluxes

2013 ◽  
Author(s):  
Zachary Edel ◽  
Abhijit Mukherjee
Keyword(s):  
Heat Transfer ◽  
Flow Boiling ◽  
Nucleate Boiling ◽  
Bubble Nucleation ◽  
Heat Fluxes ◽  
Forced Flow ◽  
Fluid Temperature ◽  
Nanofluid Flow ◽  
Nanoparticle Suspension ◽  
Nanoparticle Deposition

The preferable cooling solution to the problem of thermal management of modern electronics for increasing power dissipation could be micro heat exchangers based on forced flow boiling. Nanoparticle deposition can affect nucleate boiling heat transfer coefficient via alteration of surface thermal conductivity, roughness, capillary wicking, wettability, and nucleation site density. It can also affect heat transfer by changing bubble departure diameter, bubble departure frequency, and the evaporation of the micro and macrolayer beneath the growing bubbles. In this study, flow boiling was investigated using degassed, deionized water, and 0.001 vol% aluminum oxide nanofluids in a single rectangular brass microchannel for one inlet fluid temperature of 63°C, one flow rate of Re = 100, and two heat fluxes of 130 kW/m2 and 300 kW/m2. High speed images were taken periodically for water and after durations of 25, 75, and 125 minutes of nanofluid flow boiling. The change in regime timing revealed the effect of nanoparticle suspension and nanoparticle deposition on the Onset of Nucelate Boiling (ONB) and the Onset of Bubble Elongation (OBE). Single phase flows at the channel outlet were recorded and compared for different durations of nanofluid flow boiling. The addition of nanoparticles was found to stabilize bubble nucleation and growth and increase heat transfer in the thin film regions of the evaporating menisci.

scholarly journals Wax deposition model of heavy oil in pipeline transportation

2021 ◽  
Vol 260 ◽  
pp. 01003
Author(s):  
Shiming Chen ◽  
Yan Chen ◽  
Junze Jiang ◽  
Bowen Lou ◽  
Jimiao Duan
Keyword(s):  
Heat Transfer ◽  
Heavy Oil ◽  
Deposition Process ◽  
Model Parameters ◽  
Pipeline Transportation ◽  
Wax Deposition ◽  
Flow Shear ◽  
Transportation Process ◽  
Oil Flow ◽  
The Impact

During the transportation process of heavy oil, wax deposition is prone to occur for the low temperature outside the tube and strong heat exchange, which will adversely affect the pipeline transportation of heavy oil. Based on the experimental data of the indoor deposition loop, this paper considered the impact of strong environmental heat transfer and oil flow shear on wax deposition and established a kinetic model of wax deposition for pipeline transportation of heavy oil. Numerical simulation was performed on the flow field and temperature field during the wax deposition process to obtain the model parameters. Through analyzing the deposition rate computed by the model, this paper reveals the effect of oil flow velocity, oil temperature and wall temperature difference on wax deposition.

Experimental Investigation of Nanofluid Flow Boiling in a Single Microchannel

2012 ◽  
Author(s):  
Zachary Edel ◽  
Abhijit Mukherjee
Keyword(s):  
Heat Transfer ◽  
Bubble Growth ◽  
High Speed ◽  
Flow Boiling ◽  
Nucleate Boiling ◽  
Forced Flow ◽  
Nanofluid Flow ◽  
Two Phase ◽  
Nanoparticle Suspension ◽  
Nanoparticle Deposition

The trends of decrease in size and increase in power dissipation for micro-electronic systems present a significant challenge for thermal management of modern electronics. The preferable cooling solution could be micro heat exchangers based on forced flow boiling. Nanoparticle deposition can affect nucleate boiling heat transfer coefficient via alteration of surface thermal conductivity, roughness, capillary wicking, wettability, and nucleation site density. It can also affect heat transfer by changing bubble departure diameter, bubble departure frequency, and the evaporation of the micro and macrolayer beneath the growing bubbles. In this study, flow boiling was investigated for 0.001 vol% aluminum oxide nanofluids in a brass microchannel and compared to results for regular water. For the case of nanofluid flow boiling, high speed images were taken after boiling durations of 25, 75, 125, and 150 min. Bubble growth rates were measured and compared for each case. Flow regime oscillation was observed and regime duration was split into two periods: single-phase liquid and two-phase. The change in regime timing revealed the effect of nanoparticle suspension and deposition on the Onset of Nucelate Boiling (ONB) and the Onset of Bubble Elongation (OBE). The addition of nanoparticles was shown to stabilize bubble growth as well as the transition of flow regimes between liquid, two-phase, and vapor.

scholarly journals The Impact of Alumina Nanofluids on Pool Boiling Performance on Biphilic Surfaces for Cooling Applications

Energies ◽  
2022 ◽  
Vol 15 (1) ◽  
pp. 372
Author(s):  
Ricardo Santos ◽  
Ana Sofia Moita ◽  
Ana Paula C. Ribeiro ◽  
António Luís N. Moreira
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Pool Boiling ◽  
Triple Line ◽  
Lower Surface ◽  
Time Frame ◽  
Minor Importance ◽  
Nanoparticle Concentration ◽  
Transfer Coefficients ◽  
The Impact

This work aims to study the impact of nanofluids with alumina particles on pool boiling performance. Unlike most studies, which use a trial-and-error approach to improve boiling performance parameters, this study details the possible effects of nanoparticles on the effective mechanisms of boiling and heat transfer. For this purpose, biphilic surfaces (hydrophilic surfaces with superhydrophobic spots) were used, which allow the individual analysis of bubbles. Surfaces with different configurations of superhydrophobic regions were used. The thermophysical properties of fluids only vary slightly with increasing nanoparticle concentration. The evolution of the dissipated heat flux and temperature profiles for a nucleation time frame is independent of the fluid and imposed heat flux. It can be concluded that the optimal concentration of nanoparticles is 3 wt%. Using this nanoparticle concentration leads to lower surface temperature values than those obtained with water, the reference fluid. This is due to the changes in the balance of forces in the triple line, induced by increased wettability as a consequence of the deposited particles. Wherefore, smaller and more frequent bubbles are formed, resulting in higher heat transfer coefficients. This effect, although relevant, is still of minor importance when compared to that of the use of biphilic surfaces.

Computer simulation study about the dependence of amorphous silicon photonic waveguides efficiency on the material quality

2020 ◽  
Vol 90 (3) ◽  
pp. 30502
Author(s):  
Alessandro Fantoni ◽  
João Costa ◽  
Paulo Lourenço ◽  
Manuela Vieira
Keyword(s):  
Amorphous Silicon ◽  
High Throughput Screening ◽  
Simulation Analysis ◽  
Low Cost ◽  
Deposition Process ◽  
Large Area ◽  
Sidewall Roughness ◽  
Sensing Applications ◽  
Fabrication Defects ◽  
The Impact

Amorphous silicon PECVD photonic integrated devices are promising candidates for low cost sensing applications. This manuscript reports a simulation analysis about the impact on the overall efficiency caused by the lithography imperfections in the deposition process. The tolerance to the fabrication defects of a photonic sensor based on surface plasmonic resonance is analysed. The simulations are performed with FDTD and BPM algorithms. The device is a plasmonic interferometer composed by an a-Si:H waveguide covered by a thin gold layer. The sensing analysis is performed by equally splitting the input light into two arms, allowing the sensor to be calibrated by its reference arm. Two different 1 × 2 power splitter configurations are presented: a directional coupler and a multimode interference splitter. The waveguide sidewall roughness is considered as the major negative effect caused by deposition imperfections. The simulation results show that plasmonic effects can be excited in the interferometric waveguide structure, allowing a sensing device with enough sensitivity to support the functioning of a bio sensor for high throughput screening. In addition, the good tolerance to the waveguide wall roughness, points out the PECVD deposition technique as reliable method for the overall sensor system to be produced in a low-cost system. The large area deposition of photonics structures, allowed by the PECVD method, can be explored to design a multiplexed system for analysis of multiple biomarkers to further increase the tolerance to fabrication defects.

Experimental study of thermohydraulic characteristics and irreversibility analysis of novel axial corrugated tube with spring tape inserts

2020 ◽  
Vol 92 (3) ◽  
pp. 30901
Author(s):  
Suvanjan Bhattacharyya ◽  
Debraj Sarkar ◽  
Ulavathi Shettar Mahabaleshwar ◽  
Manoj K. Soni ◽  
M. Mohanraj
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Thermal Performance ◽  
Working Fluid ◽  
The Novel ◽  
Heat Exchanger Tube ◽  
Heat Transfer Augmentation ◽  
Corrugated Tube ◽  
The Impact ◽  
Exchanger Tube

The current study experimentally investigates the heat transfer augmentation on the novel axial corrugated heat exchanger tube in which the spring tape is introduced. Air (Pr = 0.707) is used as a working fluid. In order to augment the thermohydraulic performance, a corrugated tube with inserts is offered. The experimental study is further extended by varying the important parameters like spring ratio (y = 1.5, 2.0, 2.5) and Reynolds number (Re = 10 000–52 000). The angular pitch between the two neighboring corrugations and the angle of the corrugation is kept constant through the experiments at β = 1200 and α = 600 respectively, while two different corrugations heights (h) are analyzed. While increasing the corrugation height and decreasing the spring ratio, the impact of the swirling effect improves the thermal performance of the system. The maximum thermal performance is obtained when the corrugation height is h = 0.2 and spring ratio y = 1.5. Eventually, correlations for predicting friction factor (f) and Nusselt number (Nu) are developed.

INFLUENCE OF HEAT TREATMENT OF MOUNTAIN MASSIVE ON TEMPERATURE MODE OF GEOTHERMAL CIRCULATION SYSTEM

2018 ◽  
pp. 44-50
Author(s):  
Yu. P. Morozov
Keyword(s):  
Heat Transfer ◽  
Operating Time ◽  
Fluid Motion ◽  
Coolant Temperature ◽  
Circulation System ◽  
Thermal Processes ◽  
Temperature Mode ◽  
Heat Influx ◽  
Stationary Heat Transfer

Based on the solution of the problem of non-stationary heat transfer during fluid motion in underground permeable layers, dependence was obtained to determine the operating time of the geothermal circulation system in the regime of constant and falling temperatures. It has been established that for a thickness of the layer H <4 m, the influence of heat influxes at = 0.99 and = 0.5 is practically the same, but for a thickness of the layer H> 5 m, the influence of heat inflows depends significantly on temperature. At a thickness of the permeable formation H> 20 m, the heat transfer at = 0.99 has virtually no effect on the thermal processes in the permeable formation, but at = 0.5 the heat influx, depending on the speed of movement, can be from 50 to 90%. Only at H> 50 m, the effect of heat influx significantly decreases and amounts, depending on the filtration rate, from 50 to 10%. The thermal effect of the rock mass with its thickness of more than 10 m, the distance between the discharge circuit and operation, as well as the speed of the coolant have almost no effect on the determination of the operating time of the GCS in constant temperature mode. During operation of the GCS at a dimensionless coolant temperature = 0.5, the velocity of the coolant is significant. With an increase in the speed of the coolant in two times, the error changes by 1.5 times.

Sign in / Sign up

Export Citation Format

Share Document