The Stent Artery Interaction

Author(s):  
Linxia Gu ◽  
Aswini K. Muttyam

Experimental and clinical evidence indicate that degree of arterial injury after stent implantation is strongly linked with various stent designs. In this study, Computational models are developed to predict stents-induced arterial strain and stress during the stenting procedure. The intramural stresse filed in the stenotic vessel wall is obtained to understand the injuries caused by stent implantation. Circumferential tensile stresses are maximal in the wall near the plaque edge, and the stress values are much higher than the tensile strength of the wall medial. Stress gradient at the interface among the stent, plaque and artery are also high. These results indicate a possibility of the injury near the edge of contact surface. The stress gradient and the vessel injury may be reduced by alternating stent designs.

2013 ◽  
Vol 19 (2) ◽  
pp. 147-152 ◽  
Author(s):  
B. Gory ◽  
D. Bresson ◽  
A. Rouchaud ◽  
C. Yardin ◽  
C. Mounayer

Few animal models have been reported to evaluate and compare mechanical endovascular thrombectomy (MET) devices used to treat human ischemic stroke. These models may contribute to the understanding of arterial injury induced by a MET device and potentially by extrapolation to human intracranial arteries. We have developed a novel swine model for MET that allows visualization of the thrombus/device interaction and characterization of mechanical impact on the vessel wall. Twenty superficial femoral arteries were occluded with radiopaque thrombus, and 20 without thrombus were treated with thrombectomy devices. Acute histopathological changes were evaluated. The swine femoral artery, which is comparable in size to the human middle cerebral artery or basilar artery, may offer a useful animal model for the study of histologic alterations induced by MET.


2016 ◽  
Vol 36 (suppl_1) ◽  
Author(s):  
Phin-Peng Lee ◽  
Anuran Chatterjee ◽  
Bian Wu ◽  
Harald Nuhn ◽  
Tejal Desai ◽  
...  

Introduction: As part of a Vascular Innovation and Therapeutic Advances (VITA) contract from NHLBI, we sought to optimize a nitinol drug eluting stent to deliver a novel bioactive lipid mediator Resolvin D1 (RvD1). Methods: Nitinol stents were secured as the anode in an ethylene glycol-based anodization setup to create nanotubes on the stent surface. Scanning electron microscopy was used to evaluate the quality of the coatings where an iterative process was utilized to optimize anodization conditions (70V, 5min). To ascertain structural integrity of the coatings, stents were observed under SEM after compression in a crimping device followed by self-expansion. Nanotube-coated (NT) and unmodified bare metal (BM) nitinol stents were loaded with RvD1 by dip-coating (with sonication) followed by hanging drop evaporation of RvD1 (in ethanol). Stents were eluted in media and RvD1 levels were analyzed by EIA. An ex vivo model of vascular stent implantation was created using a 3D printer and RvD1 delivery to the vessel wall (segment of rabbit aorta) and circulating flow medium was quantified after 3 hrs of stent implantation. Results: NT stents released significant amounts of RvD1 (1273ng cumulative at day 9), where 1177ng (± 238) of RvD1 was released within 3hr and 0.111ng (± 0.014) of RvD1 was released between day 7 and day 9. Net amount of RvD1 released was 0.2nM - 2000nM, which is physiologically relevant and within the milestone goal. NT stents released much higher levels of RvD1 (9.7 pg/mg vessel; ±1.39) to the vessel wall compared to standard BM stent controls (3.9 pg/mg vessel; ±2.0) and native vessel (1.3 pg/mg vessel; ±0.5). Conclusion: We have developed optimized anodization conditions for creating a uniform coating of titania nanotubes on nitinol stents that is able to survive crimping and self-expansion. NT stents demonstrate improved loading and elution of the lipid mediator RvD1 in an ex-vivo artery flow model.


2017 ◽  
Vol 10 (2) ◽  
pp. 143-149 ◽  
Author(s):  
Ju-Yu Chueh ◽  
Kajo van der Marel ◽  
Matthew J Gounis ◽  
Todd LeMatty ◽  
Truman R Brown ◽  
...  

Background and purposeCurrently, there is neither a standard protocol for vessel wall MR imaging of intracranial atherosclerotic disease (ICAD) nor a gold standard phantom to compare MR sequences. In this study, a plaque phantom is developed and characterized that provides a platform for establishing a uniform imaging approach for ICAD.Materials and methodsA patient specific injection mold was 3D printed to construct a geometrically accurate ICAD phantom. Polyvinyl alcohol hydrogel was infused into the core shell mold to form the stenotic artery. The ICAD phantom incorporated materials mimicking a stenotic vessel and plaque components, including fibrous cap and lipid core. Two phantoms were scanned using high resolution cone beam CT and compared with four different 3 T MRI systems across eight different sites over a period of 18 months. Inter-phantom variability was assessed by lumen dimensions and contrast to noise ratio (CNR).ResultsQuantitative evaluation of the minimum lumen radius in the stenosis showed that the radius was on average 0.80 mm (95% CI 0.77 to 0.82 mm) in model 1 and 0.77 mm (95% CI 0.74 to 0.81 mm) in model 2. The highest CNRs were observed for comparisons between lipid and vessel wall. To evaluate manufacturing reproducibility, the CNR variability between the two models had an average absolute difference of 4.31 (95% CI 3.82 to 5.78). Variation in CNR between the images from the same scanner separated by 7 months was 2.5–6.2, showing reproducible phantom durability.ConclusionsA plaque phantom composed of a stenotic vessel wall and plaque components was successfully constructed for multicenter high resolution MRI standardization.


2017 ◽  
Vol 65 (6) ◽  
pp. 193S
Author(s):  
Linnea Eriksson ◽  
Samuel Röhl ◽  
Robert Saxelin ◽  
Kenneth Caidahl ◽  
Claes-Göran Östenson ◽  
...  

Author(s):  
Evelyne van Dam ◽  
Marcel Rutten ◽  
Frans van de Vosse

Rupture risk of abdominal aortic aneurysms (AAA) based on wall stress analysis may be superior to the currently used diameter-based rupture risk prediction [4; 5; 6; 7]. In patient specific computational models for wall stress analysis, the geometry of the aneurysm is obtained from CT or MR images. The wall thickness and mechanical properties are mostly assumed to be homogeneous. The pathological AAA vessel wall may contain collageneous areas, but also calcifications, cholesterol crystals and large amounts of fat cells. No research has yet focused yet on the differences in mechanical properties of the components present within the degrading AAA vessel wall.


2006 ◽  
Vol 26 (01) ◽  
pp. 42-47
Author(s):  
A. J. Reininger

SummaryPlatelets constantly patrol the inner surface of blood vessels searching leaks to be sealed, in order to prevent blood loss. When they detect a vessel injury their action can be divided into three phases. Adhesion: The platelets adhere to the injured blood vessel wall via their receptors glycoprotein (GP) Ib and integrin α2bβ3 (GPIIb/IIIa) mediated by the ligands von Willebrand factor (VWF), fibrinogen and others. Aggregation: Platelets stick to each other through fibrinogen bridging integrin α2bβ3 (GPIIb/IIIa) on adjacent platelets. Secretion: During activation the content of platelet granules is released by exocytosis, thus augmenting and propagating formation of a haemostatic plug or thrombus.Laboratory tests mimic one or several aspects of these three phases to obtain reliable data on a patients platelet function. In this overview assays, test principles, and pitfalls are presented.


1987 ◽  
Author(s):  
V Fusler ◽  
L Badimon ◽  
V Turitto ◽  
JJ Badimon ◽  
PC Adams ◽  
...  

Angiography in patients with unstable angina or myocardial infarction with subtotal coronary occlusions reveals eccentric stenoses with irregularborders suggesting ruptured atherosclerotic plaques. In addition, the closer the angiogram is to the time of chest pain the higher is the likelihoodof observing a thrombotic filling defect distal to the stenotic region. Thus, we: 1) have investigated the relationship among platelet-vessel wall interaction, rheology, andthrombogenicsubstrate and 2) propose a hypothesisaccounting for thrombosis in the acute coronary syndromes.1) Platelet Vessel Wall Interactions, Rheology and Substrate - We have studied substrate and rheology in both an 'ex vivo' perfusion chamber and 'in vivo'swine model. Qur results, combinedwith those of others, show the following:-Platelet Vessel Wall Interaction and Thrombus Formation - a) In superficial arterial injury plateletsadherevia platelet membrane glycoprotein (GP) lb to the vessel wall to form a monolayer. Von Willebrand Factor (vWF), a high molecular weight glycoprotein found in plasma, platelets, and endothelial cells, binds GPIb and supports platelet adhesion. Platelet derived growth factors(PDGF) from these adherent platelets may contribute to atherogenesis. b) In deep arterial injury, plateletsare stimulated by three pathways -arachidonate, ADP and the "third pathway" -leading to exposure of platelet receptors (GPIIb/IIIa), and subsequent aggregation. Fibrinogenand vWF participate in aggregation bybinding to GPIIb/IIIa. Simultaneously, thrombin stimulates aggregation andthe formation of fibrin that stabilizes platelet aggregates, c) Both a platelet monolayer and aggregation with thrombosis, produce vasoconstriction due to release of platelet products (serotonin, thromboxane A2,and PDGF).- Rheology - a) Stenotic lesions produce a high local shear rate, whichenhances platelet-vessel wall interaction and, in the presence of acute rupture, platelet deposition and subsequent thrombus formation, b) Platelet deposition and thrombosis are particularly favored if the site of rupture includes the stenosis with its high shear rate,while the stasis in the post-stenotic region favors proprogationof thrombus.- Substrate - a) Plaque rupture produces a rough surface and exposes collagen and fat to flowing blood. Thisstimulates mural thrombosis, b) Such thrombus is either fixed or labile depending on the degree of plaque rupture or damage.2) Acute and Subacute Coronary Syndromes - The above observations in the swine model, coupled with recent clinical and pathological observations support the following:-Unstable Angina - Mild or restricted plaque rupture with or without activated mural thrombus, by increasingthe stenosis, explains the increase in exertional angina; subsequent labile thrombosis with platelet-related vasoconstriction explains the resting angina.-Q Wave Myocardial Infarction - The thrombus is occlusive and fixed or persistent because the damage to the vessel wall or to the plaque is more severe or extensive than in unstable angina.-Non-Q Wave Myocardial Infarction -In this syndrome, intermediate between unstable angina and Q wave myocardial infarction, the occlusive thrombus is more transient than in Q wave infarction because of less substrate exposure or damage.


1981 ◽  
Author(s):  
P D Winocour ◽  
M Cattaneo ◽  
R L Kinlough-Rathbone ◽  
J F Mustard

In vascular disease it is unclear whether shortened platelet survival (PS) primarily reflects vessel injury or thrombosis. In rabbits and rats (4-6 animals per group) we examined the relations among experimental thrombosis, vessel wall injury and platelet survival and turnover. In rabbits preinjected with autologous 51Cr-platelets, a 20 cm intra-aortic-catheter in situ for 4 days resulted in a thrombus (mean wt. 23.4 mg). A significant amount of 51Cr was associated with the aorta (0.53 ± 0.13% of total 51cr circulating before surgery). PS was reduced (no catheter 62.4 ± 8.8; catheter 37.0 ± 5.6 hr, p<0.05). With a 10 cm catheter, thrombus wt. was similar (mean 24.0 mg). 51cr associated with the aorta was 0.25% ± 0.06% but PS was unaffected (no catheter 55.4 ± 6.8; catheter 53.8 ± 3.6 hr). In other experiments, sham-operated controls were compared with rabbits with 20 cm catheters. Mean thrombus wt. was 30.2 mg and 0.53 ± 0.11% of the 51cr was associated with the aorta. PS was significantly shorter in the catheter rabbits (36.7 ± 2.8 hr) vs sham-operated controls (68.0 ± 10.4 hr, pp<0.02); platelet turnover was significantly increased (14,500 ± 970 vs 9,950 ± 1,020 per mm3/hr, pp<0.01). Three groups of rats preinjected with homologous 51Icr- platelets were studied: a) sham-operated, b) aortic catheter 7.5 cm, c) aortic catheter 12.5 cm. No macroscopic thrombi were observed at any time during the 4 days that catheters were in situ. Mean PS was: a) 97.7 ± 2.4, b) 88.5 ± 2.6 and c) 63.7 ± 5.1 hr (pp<0.001, a vs c). Platelet turnover was a) 8,400 ± 720, b) 8,900 ± 870 and c) 11,000 ± 1,150 per mm3/hr. 51Cr associated with the aortae was a) 0.004 ± 0.001, b) 0.013 ± 0.006 and c) 0.027 ± 0.011% of total (pp<0.05, a vs c). Thus in rats, catheters shorten PS without thrombosis. Therefore, with catheter-induced vessel injury PS appears directly related to length of catheter and extent of injury. Shortened PS can occur without thrombus formation and thrombus formation can occur without changing PS or platelet turnover.


Sign in / Sign up

Export Citation Format

Share Document