Wind Flow Regime Around a 3 Dimensional Helical Structure

2012 ◽  
Author(s):  
Majid Rashidi ◽  
Jaikrishnan R. Kadambi ◽  
David Kerze
Keyword(s):  
Wind Speed ◽  
Three Dimensional ◽  
Helical Structure ◽  
Amplification Coefficient ◽  
Convergence Criterion ◽  
Outer Diameter ◽  
Wind Flow ◽  
Average Wind Speed ◽  
Speed Increase ◽  
Cfd Analyses

A three dimensional heliacal structure is modeled as a wind deflecting structure in this work. The purpose of the structure is to increase the natural wind speed and direct the follow of the wind toward two columns of horizontal-axis rooftop-size wind turbines that are installed in the grooves of the helical structure, diametrically opposed to each other. Computational Fluid Dynamics (CFD) analyses were conducted to determine the influence of the helical structure on the wind speed reaching the turbines. A wind speed amplification coefficient was determined for a helical structure of 6.7 m outer diameter. The velocity profiles of the wind flow around the helical structure were determined under a postulated wind speed of 4.47 m/s. The flow was modeled as turbulent with a Reynolds Number of 2,052,167. Standard “k-ἐ” turbulent model with “near wall treatment” and “standard wall function” were adapted in all analysis. A “y+” value of 50 was held constant in all simulation. The grid-size effects on the accuracy of the results were examined. Convergence criterion was satisfied in each case. This study shows that the helical structure having an outer diameter of 6.7 m results in an average wind speed increase factor of 1.52.

Wind Tower System With a Helical Wind Deflecting Structure, Computational Fluid Dynamics, and Experimental Studies

2013 ◽  
Vol 136 (2) ◽  
Author(s):  
Majid Rashidi ◽  
Jaikrishnan R. Kadambi ◽  
David Kerze
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Speed ◽  
Wind Turbines ◽  
Average Power ◽  
Helical Structure ◽  
Amplification Coefficient ◽  
Convergence Criterion ◽  
Outer Diameter ◽  
Tower System

A wind tower system having a three dimensional heliacal wind deflecting structure is studies in this work. The purpose of the helical structure is to increase the natural wind speed and direct the follow of the wind toward two columns of horizontal-axis rooftop-size wind turbines that are installed in the grooves of the helical structure, diametrically opposed to each other. Computational fluid dynamics analyses were conducted to determine the influence of the helical structure on the wind speed reaching the turbines. A wind speed amplification coefficient was determined for a helical structure of 6.7 m outer diameter. The velocity profiles of the wind flow around the helical structure were determined under a postulated wind speed of 4.47 m/s. The flow was modeled as turbulent with a Reynolds Number of 2,052,167. Standard “k–ε” turbulent model with “near wall treatment” and “standard wall function” were adapted in all analysis. A “y+” value of 50 was held constant in all simulation. The grid-size effects on the accuracy of the results were examined. Convergence criterion was satisfied in each case. This study shows that the helical structure having an outer diameter of 6.7 m results in an average wind speed increase factor of 1.52. An experimental wind tower system was fabricated and installed at an elevation of 40 m above the ground. The wind tower system comprised of four identical rooftop size wind turbines, each having 1.6 KW name-plate-rating. A helical wind deflecting structure of 11 m tall, and 7 m in major diameter was used in fabrication of the tower. An active yaw-control mechanism was used to orient the tower into the prevailing wind. The experimental results show that as the result of the use of the wind deflecting structure, an average power amplification factor of 4.69 was obtained for the tower, in comparison with the standard standalone installation of the four wind turbines.

scholarly journals Method for airborne measurement of the spatial wind speed distribution above complex terrain

2021 ◽  
Vol 6 (2) ◽  
pp. 427-440
Author(s):  
Christian Ingenhorst ◽  
Georg Jacobs ◽  
Laura Stößel ◽  
Ralf Schelenz ◽  
Björn Juretzki
Keyword(s):  
Wind Speed ◽  
Complex Terrain ◽  
Wind Farm ◽  
Three Dimensional ◽  
High Sensitivity ◽  
Spatial And Temporal Variability ◽  
Speed Increase ◽  
Airborne Measurement ◽  
Ultrasonic Anemometer ◽  
Mean Wind Speed

Abstract. Wind farm sites in complex terrain are subject to local wind phenomena, which have a relevant impact on a wind turbine's annual energy production. To reduce investment risk, an extensive site evaluation is therefore mandatory. Stationary long-term measurements are supplemented by computational fluid dynamics (CFD) simulations, which are a commonly used tool to analyse and understand the three-dimensional wind flow above complex terrain. Though under intensive research, such simulations still show a high sensitivity to various input parameters like terrain, atmosphere and numerical setup. In this paper, a different approach aims to measure instead of simulate wind speed deviations above complex terrain by using a flexible, airborne measurement system. An unmanned aerial vehicle is equipped with a standard ultrasonic anemometer. The uncertainty in the system is evaluated against stationary anemometer data at different heights and shows very good agreement, especially in mean wind speed (< 0.12 m s−1) and mean direction (< 2.4∘) estimation. A test measurement was conducted above a forested and hilly site to analyse the spatial and temporal variability in the wind situation. A position-dependent difference in wind speed increase of up to 30 % compared to a stationary anemometer is detected.

Volumetric Three-Dimensional Wind Measurement Using a Single Mobile-Based LiDAR

2015 ◽  
Vol 138 (1) ◽  
Author(s):  
M. Zendehbad ◽  
N. Chokani ◽  
R. S. Abhari
Keyword(s):  
Wind Speed ◽  
Flow Field ◽  
Measurement Technique ◽  
Complex Terrain ◽  
Wind Farm ◽  
Three Dimensional ◽  
Wind Flow ◽  
Lidar System ◽  
Scanning Lidar ◽  
Utility Scale

A novel approach to measure the wind flow field in a utility-scale wind farm is described. The measurement technique uses a mobile, three-dimensional scanning LiDAR system to make successive measurements of the line-of-sight (LOS) wind speed from three different positions; from these measurements, the time-averaged three-dimensional wind velocity vectors are reconstructed. The scanning LiDAR system is installed in a custom-built vehicle in order to enable measurements of the three-dimensional wind flow field over a footprint that is larger than with a stationary scanning LiDAR system. At a given location, multiple series of plan position indicator (PPI) and velocity azimuthal display scans are made to average out turbulent fluctuations; this series is repeated at different locations across the wind farm. The limited duration of the total measurement time period yields measurements of the three-dimensional wind flow field that are unaffected by diurnal events. The approach of this novel measurement technique is first validated by comparisons to a meteorological mast and SODAR at a meteorological observatory. Then, the measurement technique is used to characterize the wake flows in two utility-scale wind farms: one in complex terrain and the other in flat terrain. The three-dimensional characteristics of the wakes are described in the measurements, and it is observed that in complex terrain the wake has a shorter downstream extent than in flat terrain. A maximum deficit in the wind speed of 20–25% is observed in the wake. The location of the maximum deficit migrates upward as the wake evolves; this upward migration is associated with an upward pitching of the wake flow. A comparison of the measurements to a semi-empirical wake model illustrates how the measurements, at full-scale Reynolds numbers, can support further development of wake models.

scholarly journals Stabilization of unmanned aerial vehicle on trajectory in high wind conditions

2021 ◽  
pp. 55-63
Author(s):  
Vitalii Burnashev
Keyword(s):  
Wind Speed ◽  
Unmanned Aerial Vehicle ◽  
Three Dimensional ◽  
Landing Site ◽  
Flight Simulation ◽  
Vertical Shear ◽  
Average Wind Speed ◽  
Control Laws ◽  
Starting Point ◽  
Aerial Vehicle

Stationary proportional control laws have been synthesized to ensure stable motion of an unmanned aerial vehicle along a trajectory under the action of a storm wind. We give the values of the regulator coefficients for all sections of the trajectory from the starting point to the landing. Shown are the realizations of wind disturbances and the parameters of the controlled motion of the aircraft under their action. We consider the accuracy of altitude control and the error of the coordinates of the landing site. The control laws use the values of constant coefficients obtained at five points of the trajectory. Three points are used for the climb phase and one for level flight and one for descent. We took into account the wind speed as the sum of the three-dimensional turbulent component, the average horizontal component, considering the vertical shear, and discrete vertical gusts. The parameters of the Dryden shaping filters, as well as the vertical shear, are calculated for an average wind speed at a height of 6 m equal to 23.15 m / s. The speed of discrete upward gusts is 40 m/s, and downward -25 m / s. In such conditions, the unmanned aerial vehicle successfully passes the specified trajectory from the launch to the landing. For thirty realizations of flight simulation, the standard deviation of the landing site error from the wind acting was calculated.

SHAPING OF AN AUTONOMOUS POWER SYSTEM FOR GUARANTEED POWER SUPPLY WITH THE PREDOMINANCE WIND ENERGY

2018 ◽  
pp. 28-50
Author(s):  
S. G. Ignatiev ◽  
S. V. Kiseleva
Keyword(s):  
Energy Storage ◽  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Energy Demand ◽  
Diesel Generator ◽  
Average Wind Speed ◽  
Wind Speeds ◽  
Average Wind

Optimization of the autonomous wind-diesel plants composition and of their power for guaranteed energy supply, despite the long history of research, the diversity of approaches and methods, is an urgent problem. In this paper, a detailed analysis of the wind energy characteristics is proposed to shape an autonomous power system for a guaranteed power supply with predominance wind energy. The analysis was carried out on the basis of wind speed measurements in the south of the European part of Russia during 8 months at different heights with a discreteness of 10 minutes. As a result, we have obtained a sequence of average daily wind speeds and the sequences constructed by arbitrary variations in the distribution of average daily wind speeds in this interval. These sequences have been used to calculate energy balances in systems (wind turbines + diesel generator + consumer with constant and limited daily energy demand) and (wind turbines + diesel generator + consumer with constant and limited daily energy demand + energy storage). In order to maximize the use of wind energy, the wind turbine integrally for the period in question is assumed to produce the required amount of energy. For the generality of consideration, we have introduced the relative values of the required energy, relative energy produced by the wind turbine and the diesel generator and relative storage capacity by normalizing them to the swept area of the wind wheel. The paper shows the effect of the average wind speed over the period on the energy characteristics of the system (wind turbine + diesel generator + consumer). It was found that the wind turbine energy produced, wind turbine energy used by the consumer, fuel consumption, and fuel economy depend (close to cubic dependence) upon the specified average wind speed. It was found that, for the same system with a limited amount of required energy and high average wind speed over the period, the wind turbines with lower generator power and smaller wind wheel radius use wind energy more efficiently than the wind turbines with higher generator power and larger wind wheel radius at less average wind speed. For the system (wind turbine + diesel generator + energy storage + consumer) with increasing average speed for a given amount of energy required, which in general is covered by the energy production of wind turbines for the period, the maximum size capacity of the storage device decreases. With decreasing the energy storage capacity, the influence of the random nature of the change in wind speed decreases, and at some values of the relative capacity, it can be neglected.

Increase Power Efficientand Reliability of Electrosupply of Consumers of Low Power

GIS Business ◽  
2019 ◽  
Vol 14 (4) ◽  
pp. 42-52
Author(s):  
Sadullayev Nasillo Nematovich ◽  
Safarov Alisher Bekmurodovich ◽  
Nematov Shuhrat Nasilloyevich ◽  
Mamedov Rasul Akif- Ogli
Keyword(s):  
Wind Speed ◽  
Probability Distribution ◽  
Low Power ◽  
Electric Power ◽  
Energy Sources ◽  
Wind Flow ◽  
Wind Rose ◽  
Energy Potential ◽  
Wind Power Installation ◽  
Wind Energy Potential

This article assesses the wind speed data and wind energy potential in the Bukhara region of Uzbekistan. In article it is stated a principle construction "hybrid" a source of the electric power consisting from wind power installation with mechanical store of energy, the solar panel with аккумулятор in common working with an electric network. The speed and direction of the wind measured at a height of 10 m were analyzed by the Weibull probability distribution functionTo determine the direction of wind flow (wind rose), a graph in Matlab environment was constructed. The method of an estimation energy of efficiency of the objects eating from several energy sources is offered. It is proved efficiency of application of such source of the electric power low power consumers

scholarly journals Second sacral sacralalar‐iliac (S2AI) screw placement in adult degenerative scoliosis (ADS) patients: an imaging study

BMC Surgery ◽  
2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Bing Wu ◽  
Kai Song ◽  
Junyao Cheng ◽  
Pengfei Chi ◽  
Zhaohan Wang ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Imaging Study ◽  
Outer Diameter ◽  
Degenerative Scoliosis ◽  
Female Patients ◽  
Lateral Angle ◽  
Adult Degenerative Scoliosis ◽  
Imaging Characteristics ◽  
Starting Point ◽  
Trajectory Length

Abstract Background The imaging characteristics of sacral sacralalar-iliac (S2AI) screw trajectory in adult degenerative scoliosis (ADS) patients will be determined. Methods S2AI screw trajectories were mapped on three-dimensional computed tomography (3DCT) reconstructions of 40 ADS patients. The starting point, placement plane, screw template, and a circle centered at the lowest point of the ilium inner cortex were set on these images. A tangent line from the starting point to the outer diameter of the circle was selected as the axis of the screw trajectory. The related parameters in different populations were analyzed and compared. Results The trajectory length of S2AI screws in ADS patients was 12.00 ± 0.99 cm, the lateral angle was 41.24 ± 3.92°, the caudal angle was 27.73 ± 6.45°, the distance from the axis of the screw trajectory to the iliosciatic notch was 1.05 ± 0.81 cm, the distance from the axis of the screw trajectory to the upper edge of the acetabulum was 1.85 ± 0.33 cm, and the iliac width was 2.12 ± 1.65 cm. Compared with females, the lateral angle of male ADS patients was decreased, but the trajectory length was increased (P < 0.05). Compared to patients without ADS in previous studies, the lateral angle of male patients was larger, the lateral angle of female patients was increased, and the caudal angle was decreased (P < 0.05). Conclusions There is an ideal trajectory of S2AI screws in ADS patients. A different direction should be noticed in the placement of S2AI screws, especially in female patients.

scholarly journals Analysis of Performance of the Wind-Driven Pulverizing Aerator Based on Average Wind Speeds in the Conditions of Góreckie Lake

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2796
Author(s):  
Andrzej Osuch ◽  
Ewa Osuch ◽  
Stanisław Podsiadłowski ◽  
Piotr Rybacki
Keyword(s):  
Mathematical Model ◽  
Wind Speed ◽  
Water Pump ◽  
Average Wind Speed ◽  
Flow Rates ◽  
Wind Speeds ◽  
Average Wind ◽  
Flow Through ◽  
Analysis Of Performance ◽  
Research Period

In the introduction to this paper, the characteristics of Góreckie lake and the construction and operation of the wind-driven pulverizing aerator are presented. The purpose of this manuscript is to determine the efficiency of the pulverizing aerator unit in the windy conditions of Góreckie Lake. The efficiency of the pulverization aerator depends on the wind conditions at the lake. It was necessary to conduct thorough research to determine the efficiency of water flow through the pulverization segment (water pump). It was necessary to determine the rotational speed of the paddle wheel, which depended on the average wind speed. Throughout the research period, measurements of hourly average wind speed were carried out. It was possible to determine the efficiency of the machine by developing a dedicated mathematical model. The latest method was used in the research, consisting of determining the theoretical volumetric flow rates of water in the pulverizing aerator unit, based on average hourly wind speeds. Pulverization efficiency under the conditions of Góreckie Lake was determined based on 6600 average wind speeds for spring, summer and autumn, 2018. Based on the model, the theoretical efficiency of the machine was calculated, which, under the conditions of Góreckie Lake, amounted to 75,000 m3 per year.

Investigation on dust dispersion during support movement in a fully mechanized mining face and the technology with support frame enclosure dust control

2021 ◽  
pp. 095440892110311
Author(s):  
Jinming Mo ◽  
Wei Ma ◽  
Dandan Li ◽  
Sheji Zhang
Keyword(s):  
Wind Speed ◽  
Field Application ◽  
Dust Concentration ◽  
Dust Control ◽  
Average Wind Speed ◽  
Dust Source ◽  
Air Inlet ◽  
Support Frame ◽  
Site Field ◽  
Mining Face

A fully mechanized mining face is characterized by serious dust pollution and dust is a major cause of pneumoconiosis that haunts numerous miners. For a fully mechanized face having large mining heights, the main dust source in the pavement area is produced by the moving support frame. To reduce the amount of dust during support's movement, the distribution and dissipation of dust in this process were studied by combining numerical simulations with underground measurements. The results showed that with an increase of the distance from the air inlet, the wind speed of the sidewalk in the fully mechanized face first increased, then decreased, and finally increased again. At the position of the coal cutter, the highest wind speed was 1.78 m/s and the average wind speed of the roadway was about 0.8 m/s. The dust concentration at the dust source was >1000 mg/m3. An area with a high dust concentration and having a length of 15 m was formed on the rooftop, together with a 50 m long dust belt with a dust concentration of 300 to 450 mg/m3 in the pavement area of 10 m from the dust source. Beyond the 45 m radius from the dust source, the dust concentration was stable at about 250 mg/m3. Based on the dust production characteristics of the support frame, an enclosed dust-guiding device was designed and structure-optimized. Based on the on-site field application test results, it was found that the device has a satisfactory dust-guiding effect during support movement and the dust suppression rate near the dust source reached 94.8%.

Sign in / Sign up

Export Citation Format

Share Document