Enhancement of Heat Transfer Coefficient in an Automobile Radiator Using Multi Walled Carbon Nano Tubes (MWCNTS)

2014 ◽  
Author(s):  
Ramgopal Varma Ramaraju ◽  
Manikantan Kota ◽  
Hadi Bin Manap ◽  
Vasudeva Rao Veeredhi
Keyword(s):  
Heat Transfer ◽  
Carbon Nanotubes ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Research Area ◽  
Nano Particles ◽  
Engineering System ◽  
Enhancement Of Heat Transfer ◽  
System Perspective ◽  
Nano Fluid

Enhancement of heat transfer coefficient continues to be an important research area in various fields of engineering ranging from microelectronics to high powered automobiles. The initial effort in the present research study is to enhance the heat transfer coefficient in a vehicle radiator using nanofluids with high thermal conductivity. The world’s most abundant element ‘Carbon’ astoundingly exists in various structures and one such form is tube commonly known as Carbon Nanotubes (CNTs). Heat transfer enhancement in water and coolant based systems with different concentrations of nano particles (carbon nanotubes) have been investigated from an engineering system perspective. One such system considered is a “SUZUKI (800CC) - CAR RADIATOR”, cooling circuit using different nanofluids to replace the conventional engine coolant. In the present study, the effect of nano-fluid heat transfer to enhance in water and coolant based systems with multi walled carbon nanotubes has been investigated. The improvement of heat transfer when compared to water, coolant (water + ethylene glycol 60:40) and water with MWCNTS and coolant with MWCNTS has been studied. It has been observed that there is an enhancement of heat transfer up to 30% when coolant and CNTS are used as a cooling medium.

Enhancement of Heat Transfer Due to Plasma Flow in Material Processing Applications

2005 ◽  
Author(s):  
V. Rajamani ◽  
R. Anand ◽  
G. S. Reddy ◽  
J. Sekhar ◽  
M. A. Jog
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Plasma Flow ◽  
Plasma Heating ◽  
Transient Temperature ◽  
Convective Heating ◽  
Enhancement Of Heat Transfer ◽  
Plasma Device ◽  
Made In

Convective heating is used in materials processing industry for heat treatment and melting applications. Only recently, a new plasma device for convective heating at atmospheric pressure has become commercially available. In this paper, we have investigated heating of an aluminum sprue by conventional convective heating by air and by plasma flow. Transient temperature measurements were made in the sprue interior and the overall heat transfer coefficient was computationally predicted in the two cases. Results show that there is significant enhancement of heat transfer in convective plasma heating compared to heating due to unionized gas under identical flow and temperature conditions. For the cases considered in this study, close to a 60% increase in the heat transfer rate was obtained. The key finding is that even small amount of ionization (~ < 1%) can lead to significant increase in heat transfer coefficient.

Characterization of Al2O3/Water Nanofluid through Shell and Tube Heat Exchangers over Parallel and Counter Flow

2017 ◽  
Vol 45 ◽  
pp. 155-163 ◽  
Author(s):  
S. Nallusamy
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Mass Flow ◽  
Counter Flow ◽  
Overall Heat Transfer Coefficient ◽  
Nano Fluid ◽  
Shell And Tube

Nanotechnology has become one of the fastest growing scientific and engineering disciplines. Nano fluids have been established to possess enhanced thermal and physical properties such as thermal conductivity, thermal diffusivity, viscosity and convective heat transfer coefficients. The aim of this research article is to analyze the overall heat transfer coefficient by doing an experimental investigation on the convective heat transfer and flow characteristics of a nano fluid. In this research, an attempt was made for the nano fluid consisting of water and 1% volume concentration of Al2O3/water Nano fluid flowing in a parallel flow, counter flow in shell and tube heat exchanger under laminar flow condition. The 50nm diameter Al2O3nanoparticles are used in this investigation and was found that the overall heat transfer coefficient and convective heat transfer coefficient of nano fluid to be slightly higher than that of the base liquid at same mass flow rate and inlet temperature. Three samples of dissimilar mass flow rates have been identified for conducting the experiments and their results are continuously monitored and reported. The experimental analysis results were concluded that the heat transfer and overall heat transfer coefficient enhancement is possible with increase in the mass flow rate of fluid and Al2O3/water nano fluid on a comparative basis.

scholarly journals ENHANCING HEAT TRANSFER COEFFICIENT AND BREAKDOWN STRENGTH OF MINERAL OIL BY (AL2O3 AND TIO2) NANOPARTICLES

2021 ◽  
Vol 25 (Special) ◽  
pp. 2-33-2-38
Author(s):  
Mohammad M. Ali ◽  
◽  
Amer H. Majeed ◽  
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Thermal Properties ◽  
Transfer Coefficient ◽  
Breakdown Strength ◽  
Dielectric Strength ◽  
Mineral Oil ◽  
Nano Particles ◽  
Paper Study ◽  
Enhancing Heat Transfer

The aims of this paper study the effects of two types of nanoparticle on dielectric strength and heat transfer coefficient within mineral oil used in an electrical transformer. These nanoparticles (NPs) including (semi conductive TiO2 and insulating Al2O3), have been prepared with the same size and surface modification, it is shown that nano-particles enhance insulating and thermal properties of mineral oil as well as the degree of enhancement is dependent on the NPs concentration.

scholarly journals Numerical Simulation of the Performance of Applying Different Nanofluids in a Tube with a 90° Bend at the Center of the Tube

2021 ◽  
Vol 2021 ◽  
pp. 1-19
Author(s):  
Dinesh Kumar ◽  
Gurpreet Singh Sokhal ◽  
Nima Khalilpoor ◽  
AlibekIssakhov ◽  
Babak Mosavati
Keyword(s):  
Heat Transfer ◽  
Carbon Nanotubes ◽  
Reynolds Number ◽  
Heat Transfer Coefficient ◽  
Aluminum Oxide ◽  
Copper Oxide ◽  
Transfer Coefficient ◽  
Volume Concentration ◽  
Multiwalled Carbon ◽  
Flat Tube

This research manuscript addresses the study of the performance of a flat tube having a 90° bend under the flow of three different nanofluids such as copper oxide, multiwalled carbon nanotubes, and aluminum oxide/water nanofluids at different inlet fluid temperatures and Reynolds numbers. The performance of the flat tube is analyzed under the Reynolds number between 5000 and 11000 and a fluid inlet temperature range of 35°C–50°C. The results obtained in this study show that the heat transfer coefficient increases with the increase in volume concentration as well as Reynolds number. The maximum heat transfer coefficient is obtained using multiwalled carbon nanotubes followed by copper oxide and then aluminum oxide. This study also illustrates that the friction factor increases with the increase in volume concentration and decrease in Reynolds number. The results of the numerical study have been validated with the help of an experimental study. The study has proved that the use of nanofluids instead of the conventional fluid can lead to reducing the size of the tube for the same amount of heat transfer which can prove the reduction of the size in heat transfer equipment. Furthermore, it is also observed in this study that the presence of the 90° bend in the flat tube improved the heat transfer performance due to the increased turbulence at the bent section of the tube.

scholarly journals Numerical study of heat transfer in 90° bend tube by AI2O3 nano fluids using fluid injection

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Hadi Mahdizadeh ◽  
Nor Mariah Adam
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Reynolds Number ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Volume Fraction ◽  
Fluid Injection ◽  
Content Type ◽  
Nano Fluid ◽  
The Impact

Purpose This paper aims to investigate increasing heat transfer in bend tube 90° by fluid injection using nano fluid flow that was performed by expending varying Reynolds number. This paper studies the increased heat transfer in the bent tube that used some parameters to examine the effects of volume fraction, nanoparticle diameter, fluid injection, Reynolds number on heat transfer and flow in a bend pipe. Design/methodology/approach Designing curved tubes increases the thermal conductivity amount between fluid and wall. It is used the finite volume method and simple algorithms to solve the conservation equations of mass, momentum and energy. The results showed that the nanoparticles used in bent tube transfusion increase the heat transfer performance by increasing the volume fraction; it has a direct impact on enhancing the heat transfer coefficient. Findings Heat transfer coefficient enhanced 1.5% when volume fraction increased from 2 % to 6%, the. It is due to the impact of nanoparticles on the thermal conductivity of the fluid. The fluid is injected into the boundary layer flow due to jamming that enhances heat transfer. Curved lines used create a centrifugal force due to the bending and lack of development that increase the heat transfer. Originality/value This study has investigated the effect of injection of water into a 90° bend before and after the bend. Specific objectives are to analyze effect of injection on heat transfer of bend tube and pressure drop, evaluate best performance of mixing injection and bend in different positions and analyze effect of nano fluid volume fraction on injection.

Pool boiling performance of oxide nanofluid on a downward-facing heating surface

Kerntechnik ◽  
2022 ◽  
Vol 0 (0) ◽  
Author(s):  
Zhibo Zhang ◽  
Huai-En Hsieh ◽  
Yuan Gao ◽  
Shiqi Wang ◽  
Jia Gao ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Surface Roughness ◽  
Stainless Steel ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Critical Heat Flux ◽  
Pool Boiling ◽  
Heating Surface ◽  
Nano Particles

Abstract In this study, the pool boiling performance of oxide nanofluid was investigated, the heating surface is a 5 × 30 mm stainless steel heating surface. Three kinds of nanofluids were selected to explore their critical heat flux (CHF) and heat transfer coefficient (HTC), which were TiO2, SiO2, Al2O3. We observed that these nanofluids enhanced CHF compared to R·O water, and Al2O3 case has the most significant enhancement (up to 66.7%), furthermore, the HTC was also enhanced. The number of bubbles in nanofluid case was relatively less than that in R·O water case, but the bubbles were much larger. The heating surface was characterized and it was found that there were nano-particles deposited, and surface roughness decreased. The wettability also decreased with the increase in CHF.

Characterization of Thermal Properties and Heat Transfer Behavior of Microencapsulated Phase Change Material Slurry and Multiwall Carbon Nanotubes in Aqueous Suspension

2007 ◽  
Author(s):  
Jorge L. Alvarado ◽  
Charles Marsh ◽  
Curt Thies ◽  
Guillermo Soriano ◽  
Paritosh Garg
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Heat Transfer Coefficient ◽  
Phase Change ◽  
Transfer Coefficient ◽  
Effective Thermal Conductivity ◽  
Phase Change Material ◽  
Microencapsulated Phase Change Material ◽  
Change Material

In the last decade, microencapsulated phase change material (MPCM) slurries have been proposed and studied as novel coolants for heat transfer applications. Such applications include electronics cooling, and secondary coolants in air conditioning systems among others. Experiments have shown that MPCM’s increase the overall thermal capacity of thermal systems by taking advantage of the phase change material’s latent heat of fusion. However, research has also shown that the overall heat transfer coefficient is diminished due to a reduction in the effective thermal conductivity and increased viscosity of the slurry. For this reason, there is an urgent need to modify the content of microcapsules containing phase change material to increase their effective thermal conductivity and the overall heat transport process. Our solution consists of increasing the thermal conductivity of MPCM by adding carbon nanotubes to the shell and core of the microcapsules. Carbon nanotubes have shown to increase the thermal conductivity of liquids by 40% or more in recent experiments. In this paper, MPCM slurry containing octadecane as phase change material and multi-wall carbon nanotubes (MWCNTs) embedded in the capsule material and core are compared with pure water as heat transfer fluid. Thermal and physical properties of MPCM slurry containing carbon nanotubes were determined using a differential scanning calorimeter and concentric viscometer, respectively. Experimental convective heat transfer coefficient data for MWCNT aqueous suspensions under laminar flow and constant heat flux were determined using a bench-top heat transfer loop. Experimental heat transfer results are presented.

Sign in / Sign up

Export Citation Format

Share Document