Modal Analysis on a High Speed Train Based on Forced Excitation From Track

2012 ◽  
Author(s):  
Lara Ma Erviti Calvo ◽  
Gorka Agirre Castellanos ◽  
Igor Alonso Portillo ◽  
Mayi Garcia Prada
Keyword(s):  
Modal Analysis ◽  
High Speed ◽  
Impact Force ◽  
Impact Excitation ◽  
Modal Parameters ◽  
Maximum Speed ◽  
Vibration Modes ◽  
Test Results ◽  
High Speed Train ◽  
Railway Vehicles

The more demanding safety and comfort requirements combined with the increasing maximum speed of trains have lead to a growing concern in aspects such as the determination of the modal parameters of railway vehicles. Until now, the modal parameters of a vehicle have been obtained by EMA (Experimental Modal Analysis) based on the application of an impact force on the vehicle frame. However this kind of test is not optimal for railway vehicles because, due to their large dimensions, an impact force is unable to excite all the points of the structure. Also, with this method only the structural modes can be analyzed. Because of these drawbacks, a new modal analysis methodology is proposed, in which the excitation force comes from a specially designed shaker mounted under a point of a test track. In this manner, real excitation conditions can be simulated and it allows to determine not only the structural modes, but also the vibration modes associated with the suspensions. In first place, a description of the test facilities is presented. Afterwards, we present a test carried out in one of the coaches of a high speed train. The instrumentation employed, test methodology and test results are described. Finally, the test results are compared with the results obtained from a modal test in which impact excitation was used. Also the vibration modes obtained in the test are compared with the theoretical ones, which have been calculated with a combination of a FEM (Finite Element Method) and a MBS (Multi-Body Simulation).

scholarly journals Full-Field Operational Modal Analysis of an Aircraft Composite Panel from the Dynamic Response in Multi-Impact Test

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1602
Author(s):  
Ángel Molina-Viedma ◽  
Elías López-Alba ◽  
Luis Felipe-Sesé ◽  
Francisco Díaz
Keyword(s):  
Modal Analysis ◽  
Energy Absorption ◽  
High Speed ◽  
Operational Modal Analysis ◽  
Modal Identification ◽  
Image Correlation ◽  
Composite Panel ◽  
Impact Excitation ◽  
Full Field ◽  
The Impact

Experimental characterization and validation of skin components in aircraft entails multiple evaluations (structural, aerodynamic, acoustic, etc.) and expensive campaigns. They require different rigs and equipment to perform the necessary tests. Two of the main dynamic characterizations include the energy absorption under impact forcing and the identification of modal parameters through the vibration response under any broadband excitation, which also includes impacts. This work exploits the response of a stiffened aircraft composite panel submitted to a multi-impact excitation, which is intended for impact and energy absorption analysis. Based on the high stiffness of composite materials, the study worked under the assumption that the global response to the multi-impact excitation is linear with small strains, neglecting the nonlinear behavior produced by local damage generation. Then, modal identification could be performed. The vibration after the impact was measured by high-speed 3D digital image correlation and employed for full-field operational modal analysis. Multiple modes were characterized in a wide spectrum, exploiting the advantages of the full-field noninvasive techniques. These results described a consistent modal behavior of the panel along with good indicators of mode separation given by the auto modal assurance criterion (Auto-MAC). Hence, it illustrates the possibility of performing these dynamic characterizations in a single test, offering additional information while reducing time and investment during the validation of these structures.

The Use of Modan 3D in Experimental Modal Analysis

2013 ◽  
Vol 486 ◽  
pp. 36-41 ◽  
Author(s):  
Róbert Huňady ◽  
František Trebuňa ◽  
Martin Hagara ◽  
Martin Schrötter
Keyword(s):  
Modal Analysis ◽  
Vibration Analysis ◽  
High Speed ◽  
Mechanical Vibration ◽  
Steel Sample ◽  
Experimental Modal Analysis ◽  
Image Correlation ◽  
Optical Methods ◽  
Mode Shapes ◽  
Vibration Modes

Experimental modal analysis is a relatively young part of dynamics, which deals with the vibration modes identification of machines or their parts. Its development has started since the beginning of the eighties, when the computers hardware equipment has improved and the fast Fourier transform (FFT) could be used for the results determination. Nowadays it provides an uncountable set of vibration analysis possibilities starting with conventional contact transducers of acceleration and ending with modern noncontact optical methods. In this contribution we mention the use of high-speed digital image correlation by experimental determination of mode shapes and modal frequencies. The aim of our work is to create a program application called Modan 3D enabling the performing of experimental modal analysis and operational modal analysis. In this paper the experimental modal analysis of a thin steel sample performed with Q-450 Dantec Dynamics is described. In Modan 3D the experiment data were processed and the vibration modes were determined. The reached results were verified by PULSE modulus specialized for mechanical vibration analysis.

A Study on Speed Elevation Possibility at the Connection between High Speed Lines and Conventional Lines with Korean High Speed Train

2006 ◽  
Vol 326-328 ◽  
pp. 635-638 ◽  
Author(s):  
Young Sam Ham ◽  
Jai Sung Hong
Keyword(s):  
Contact Force ◽  
High Speed ◽  
Integrated System ◽  
Communication Line ◽  
Mass Transportation ◽  
Test Results ◽  
High Speed Train ◽  
Safety Standards ◽  
Derailment Coefficient ◽  
Train Speed

Railways are a mass transportation system with high safety and punctuality. These strengths have been well proved by tests and evaluations. Railways are an integrated system with cars, power, signal, communication, line structures and operation. Among many safety standards of these systems, contact force between wheels and lines can be chosen since a derailment coefficient evaluated by contract force is the most important fact that decides the safety of railways. Especially regarding express trains, since they run twice faster than conventional ones, the evaluation of a derailment coefficient is more important than any other criteria. Currently, Korean express trains between Seoul and Pusan use the same stations as conventional trains in Daejeon and Dong-Daegu; therefore, express trains run on conventional lines from express lines. This paper describes test results acquired by increasing the train speed where express lines and conventional lines are connected. Test results tell that it is safe with under 0.8 derailment coefficient and running time is reduced by 10~30 seconds in each section.

Measurement and Analysis of Adhesion Phenomena in High Speed Train

2008 ◽  
Author(s):  
Masanobu Nankyo ◽  
Shin-Ichi Nakazawa
Keyword(s):  
Measurement Technique ◽  
High Speed ◽  
Evaluation Method ◽  
Adhesion Force ◽  
Rolling Speed ◽  
High Speed Train ◽  
Adhesion Coefficient ◽  
Railway Vehicles ◽  
Measurement And Analysis ◽  
Water Lubricant

Performance of acceleration or deceleration of railway vehicles is limited to adhesion force. It is well known that adhesion coefficient between wheel and rail tread has some difficult characteristics; one of them is its descending tendency with the ascent of rolling speed particularly under water lubricant condition. We need to know these characteristics as quantitative descriptions, and arrange them to an easy-to-use way for design of running gear such as powering or braking devices. In this paper, a measurement technique on operating train and an advanced evaluation method of the adhesion coefficients are introduced.

Deformation and Energy Absorption of Steel Square Tubes With Optimized Shape Design

2019 ◽  
Author(s):  
Xiaofang Liu ◽  
Ziwen Fang ◽  
Haifeng Hong ◽  
Jianran Wang ◽  
Yanwen Liu ◽  
...  
Keyword(s):  
Impact Force ◽  
Longitudinal Direction ◽  
Axial Direction ◽  
Shape Design ◽  
Test Results ◽  
Element Analysis ◽  
Railway Vehicles ◽  
Side Walls ◽  
Energy Absorbers ◽  
Energy Absorbing

Abstract Square crush tubes have been widely used as impact energy absorbers in automotive and railway vehicles. In this paper, a square tube with vertical plates and dents has been designed to increase the controllability and stability of crash performance. Vertical plates are welded perpendicularly to the side walls of the tube, which increase the transverse stiffness and ensure the tube crashes in longitudinal direction under impact not in ideal axial direction. Dents have been put on the side walls near the front end of the tube to ensure the collapse always start from the front and progress gradually to the end. To validate the design, finite element analysis (FEA) and various experiments has been conducted and evaluated. Firstly, the numerical simulations were carried out using the software LS-DYNA. Then, four specimens were manufactured and tested. The crash velocity, tube deformation and impact force showed great agreement between the simulations and test results. The number of tubes, tube wall thickness, cross-section, trigger plates and dents arrangement can be adjusted to meet the requirements of different applications. In one application, the energy absorbing device with four crush tubes provided progressive controlled collapse with energy absorbing capacity of 1.22MJ and impact force less than 4450kN. This robust crush tube design has been successfully applied in multiple railway vehicles and also has the potential to be applied in other industries such as automotive vehicles.

Application of Operational Modal Analysis on Railway Vehicles Using on Track Measurements

2013 ◽  
Author(s):  
Lara Mª Erviti Calvo ◽  
Gorka Agirre Castellanos ◽  
Igor Alonso Portillo
Keyword(s):  
Modal Analysis ◽  
Operational Modal Analysis ◽  
Modal Parameters ◽  
Railway Vehicle ◽  
Correct Identification ◽  
Static Test ◽  
Railway Vehicles ◽  
Analysis Techniques ◽  
Behavior Design ◽  
Nonlinear Components

Nowadays the application of experimental modal analysis techniques on railway vehicles is gaining importance. A correct identification of modal characteristics allows improving the dynamic behavior design of the vehicle and so reaching higher running speeds and accomplishing better comfort levels. So far, in the railway sector only conventional modal analysis techniques have been used. With these techniques, the modal parameters are determined during a static test by measuring the responses of the system to one or multiple known forces. This paper presents the application of the Operational Modal Analysis (OMA) technique on a railway vehicle. This technique determines the modal parameters employing only the responses of the system to an unknown excitation. In this way, the data to be used can be acquired during on track test which presents three main advantages. The first one is that the nonlinear components of the suspensions are working in their normal operating condition which is difficult to achieve during a static test. The second one is that the wheel spinning effect is taken into account. Finally, the test can be combined with other type of track tests, reducing the period of time before delivery of the vehicle to the client. In the case under study, the OMA technique is applied by means of commercial software to measurements performed on a passengers train. The modal parameters obtained for the carbody and one of the bogies are presented.

scholarly journals Dynamic Analysis of an Existing Arch Railway Bridge According to Eurocodes

2016 ◽  
Vol 62 (4) ◽  
pp. 99-118 ◽  
Author(s):  
R. Oleszek ◽  
W. Radomski
Keyword(s):  
Dynamic Analysis ◽  
Modal Analysis ◽  
Structural Dynamics ◽  
High Speed ◽  
Bending Moments ◽  
Railway Bridge ◽  
High Speed Train ◽  
Arch Bridge ◽  
Railway Bridges ◽  
Structural Solutions

AbstractModern regulations concerning railway bridges are based on the approach of structural dynamics, which is described in PN-EN standards. This paper presents the results of theoretical dynamic analysis of the HSLM-A train set loading on the structure of a pre-stressed concrete arch bridge - the first railway bridge of its type which was built in Poland (completed in 1959). The recommendations of PN-EN have been followed and modal analysis was carried out to define the sensitivity of the structure to chosen eigenforms. Additionally the paper presents a course of calculations and the conclusions obtained from the analysis of displacements, accelerations, and bending moments induced in the structure through a simulated passage of a high-speed train in the context of the requirements of PN-EN Standards. The conclusions from the current calculations can be used for dynamic analysis of bridges of similar structural solutions.

The Experimental Modal Analysis of High Speed Machining Tool System Based on Integral Polynomial Recognition Method

2012 ◽  
Vol 723 ◽  
pp. 159-163 ◽  
Author(s):  
Fei Xiao ◽  
Xian Li Liu ◽  
Yan Xin Wang ◽  
Li Jia Liu ◽  
Da Qu
Keyword(s):  
Modal Analysis ◽  
High Speed ◽  
Simulation Method ◽  
Experimental Modal Analysis ◽  
Modal Parameters ◽  
High Speed Machining ◽  
Analysis Method ◽  
Recognition Method ◽  
Element Simulation ◽  
Integral Polynomial

According to the principle of the experimental modal analysis, this study is based on tool system of the MIKRON UCP 710 numerical control machining center as test object for experimental modal analysis. Using the integral polynomial recognition method to identify the modal parameters (natural frequency, structural damping, and modal shape), and finally matching the results with the vector analysis method and the finite element simulation method. The results show that integral polynomial recognition method has higher precision than the vector analysis method to identify the multi-degree of freedom system; the experimental modal analysis can also obtain better modal parameters of the structure system, and a higher precision than the finite element simulation method. Obtained the MIKRON UCP 710 high-speed milling center tool system accurate modal parameters provides the necessary theoretical and experimental basis for the further study of the stability properties in the cutting processing of the high speed machining tool system.

Analysis of the effects of vibration modes on fatigue damage in high-speed train bogie frames

2018 ◽  
Vol 89 ◽  
pp. 222-241 ◽  
Author(s):  
Yaohui Lu ◽  
Penglin Xiang ◽  
P. Dong ◽  
Xing Zhang ◽  
Jing Zeng
Keyword(s):  
Fatigue Damage ◽  
High Speed ◽  
Vibration Modes ◽  
High Speed Train

The Study on Experimental Modal Analysis of High-Speed Rotational Shaft

2012 ◽  
Vol 605-607 ◽  
pp. 1253-1256
Author(s):  
Jun Zhao ◽  
Jian Chang Yuan
Keyword(s):  
Modal Analysis ◽  
High Speed ◽  
Excitation Frequency ◽  
Dominant Frequency ◽  
Experimental Modal Analysis ◽  
Vibration Modes ◽  
Response Signal ◽  
Modal Frequency ◽  
Frequency Components ◽  
Vibration Problems

Centering on the chuck shaft vibration problems in high speed operation of the high-speed winder, experimental modal analysis was used to identify the modal frequency and vibration modes of the chuck shaft different cross-section in the constraint, found out the sensitive point of the response signal ,and the excitation point was found by Relationship between the modal frequency and the input excitation frequency, the results show determined dominant frequency components in the response signal can provide a reliable basis for determining the vibration characteristics of the chuck shaft, analysis of distinguishing the output response signal and selecting response signal point.

Sign in / Sign up

Export Citation Format

Share Document