Modeling of an Electrostatic Micromotor Based on a Levitated Rotor

2007 ◽  
Author(s):  
Xi Chen ◽  
Fengtian Han ◽  
Yunfeng Liu
Keyword(s):  
Mathematical Model ◽  
Rotational Speed ◽  
Degrees Of Freedom ◽  
Nonlinear Models ◽  
Electrostatic Force ◽  
Element Model ◽  
Micro Electro Mechanical Systems ◽  
Position Sensing ◽  
And Control ◽  
The Mathematical Model

This paper presents a mathematical model developed for an electrostatically levitated micromotor in which the ring-shaped rotor is levitated by electrostatic force in five degrees of freedom (DOFs). A glass/silicon/glass sandwich structure is utilized in this electrostatic micromotor, which is based on the technology of micro-electro-mechanical systems (MEMS). In the center of ring-shaped cavity formed by ICP between the top and bottom glass plates, the rotor is levitated by the five DOFs position servo system and driven by speed control system. In this paper, the mathematical model for the motion control of the rotor in five DOFs is developed. This model describes the capacitances and electrostatic forces between the rotor and associated electrodes, and moments of two rotations about the x, y-axis. The rotational torque model governing the rotor’s rotational speed is also described. In order to obtain the analytical nonlinear models for error analysis, these integral equations are expanded using the Taylor’s series. Moreover the finite element model and its simulation results are obtained by using ANSYS. In terms of comparison between the simulated results and the nonlinear models, the modeling accuracy of the micromotor can be evaluated. Furthermore, the error characteristics of the linearized models via rotor displacement are analyzed. Thus, position sensing and control of both the rotor’s motion, and the rotational speed, can be achieved based on these linearized models of electrostatically levitated micromotors.

scholarly journals Set-membership identifiability of nonlinear models and related parameter estimation properties

2016 ◽  
Vol 26 (4) ◽  
pp. 803-813 ◽  
Author(s):  
Carine Jauberthie ◽  
Louise Travé-MassuyèEs ◽  
Nathalie Verdière
Keyword(s):  
Mathematical Model ◽  
Parameter Estimation ◽  
Dynamic System ◽  
Nonlinear Models ◽  
Differential Algebra ◽  
Related Parameter ◽  
Set Membership ◽  
Estimation Problems ◽  
The Mathematical Model

Abstract Identifiability guarantees that the mathematical model of a dynamic system is well defined in the sense that it maps unambiguously its parameters to the output trajectories. This paper casts identifiability in a set-membership (SM) framework and relates recently introduced properties, namely, SM-identifiability, μ-SM-identifiability, and ε-SM-identifiability, to the properties of parameter estimation problems. Soundness and ε-consistency are proposed to characterize these problems and the solution returned by the algorithm used to solve them. This paper also contributes by carefully motivating and comparing SM-identifiability, μ-SM-identifiability and ε-SM-identifiability with related properties found in the literature, and by providing a method based on differential algebra to check these properties.

scholarly journals A Pot-Like Vibrational Microfluidic Rotational Motor

Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 177
Author(s):  
Suzana Uran ◽  
Matjaž Malok ◽  
Božidar Bratina ◽  
Riko Šafarič
Keyword(s):  
Mathematical Model ◽  
Rotational Speed ◽  
Mechanical Energy ◽  
Real Life ◽  
Frequency Region ◽  
Theoretical Research ◽  
Practical Challenge ◽  
The Mathematical Model ◽  
Motor Structure ◽  
Proper Balance

Constructing a micro-sized microfluidic motor always involves the problem of how to transfer the mechanical energy out of the motor. The paper presents several experiments with pot-like microfluidic rotational motor structures driven by two perpendicular sine and cosine vibrations with amplitudes around 10 μm in the frequency region from 200 Hz to 500 Hz. The extensive theoretical research based on the mathematical model of the liquid streaming in a pot-like structure was the base for the successful real-life laboratory application of a microfluidic rotational motor. The final microfluidic motor structure allowed transferring the rotational mechanical energy out of the motor with a central axis. The main practical challenge of the research was to find the proper balance between the torque, due to friction in the bearings and the motor’s maximal torque. The presented motor, with sizes 1 mm by 0.6 mm, reached the maximal rotational speed in both directions between −15 rad/s to +14 rad/s, with the estimated maximal torque of 0.1 pNm. The measured frequency characteristics of vibration amplitudes and phase angle between the directions of both vibrational amplitudes and rotational speed of the motor rotor against frequency of vibrations, allowed us to understand how to build the pot-like microfluidic rotational motor.

A prey–predator model and control of a nematodes pest using control in banana: Mathematical modeling and qualitative analysis

2021 ◽  
pp. 2150089
Author(s):  
Sudhakar Yadav ◽  
Vivek Kumar
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Local Stability ◽  
Detection Method ◽  
Initial Release ◽  
Pest Detection ◽  
Predator Model ◽  
And Control ◽  
The Mathematical Model ◽  
Theoretical Results

This study develops a mathematical model for describing the dynamics of the banana-nematodes and its pest detection method to help banana farmers. Two criteria: the mathematical model and the type of nematodes pest control system are discussed. The sensitivity analysis, local stability, global stability, and the dynamic behavior of the mathematical model are performed. Further, we also develop and discuss the optimal control mathematical model. This mathematical model represents various modes of management, including the initial release of infected predators as well as the destroying of nematodes. The theoretical results are shown and verified by numerical simulations.

scholarly journals Mathematical modeling and harmonic analysis of SISFCL

2017 ◽  
Vol 36 (1) ◽  
pp. 258-270
Author(s):  
Debraj Sarkar ◽  
Debabrata Roy ◽  
Amalendu Bikash Choudhury ◽  
Sotoshi Yamada
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Harmonic Analysis ◽  
Voltage Drop ◽  
Element Model ◽  
Iron Core ◽  
Content Type ◽  
Hysteresis Characteristic ◽  
The Core ◽  
The Mathematical Model

Purpose A saturated iron core superconducting fault current limiter (SISFCL) has an important role to play in the present-day power system, providing effective protection against electrical faults and thus ensuring an uninterrupted supply of electricity to the consumers. Previous mathematical models developed to describe the SISFCL use a simple flux density-magnetic field intensity curve representing the ferromagnetic core. As the magnetic state of the core affects the efficient working of the device, this paper aims to present a novel approach in the mathematical modeling of the device with the inclusion of hysteresis. Design/methodology/approach The Jiles–Atherton’s hysteresis model is utilized to develop the mathematical model of the limiter. The model is numerically solved using MATLAB. To support the validity of model, finite element model (FEM) with similar specifications was simulated. Findings Response of the limiter based on the developed mathematical model is in close agreement with the FEM simulations. To illustrate the effect of the hysteresis, the responses are compared by using three different hysteresis characteristics. Harmonic analysis is performed and comparison is carried out utilizing fast Fourier transform and continuous wavelet transform. It is observed that the core with narrower hysteresis characteristic not only produces a better current suppression but also creates a higher voltage drop across the DC source. It also injects more harmonics in the system under fault condition. Originality/value Inclusion of hysteresis in the mathematical model presents a more realistic approach in the transient analysis of the device. The paper provides an essential insight into the effect of the core hysteresis characteristic on the device performance.

Аpplication of the mathematical model of human torso for modeling abbreval influence in wound ballistics

2020 ◽  
Vol 22 (3) ◽  
pp. 132-139
Author(s):  
A. V. Denisov ◽  
M. D. Stepanov ◽  
N. A. Haraldin ◽  
A. V. Stepanov ◽  
A. I. Borovkov ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Element Model ◽  
Mechanical Action ◽  
Calculation Model ◽  
Calculation Results ◽  
Automated Processing ◽  
Original Calculation ◽  
Using Data ◽  
The Mathematical Model ◽  
Selection Of

Abstract. In the work, a review of scientific articles on the behavior of tissues and organs of the human body under local mechanical effects on it, as well as a description of the physico-mechanical properties of biological materials. The selection of mechanical behavior for each biological material as part of a mathematical model of the human torso was carried out, its finite element model was created, validation experiments were modeled using data presented in the literature. An original calculation model of a human torso with a tuned interaction of organs with each other was developed. Contact interaction parameters are determined. The developed computational model of a human torso was verified based on data from open sources for an experiment with mechanical action by a cylindrical impactor. An algorithm for processing pressure and acceleration graphs has been implemented in order to obtain tolerance curves. A specialized modular program has been created for the automated processing of calculation results and the output of the main results. 42 numerical tests were carried out simulating the entry of a steel ball into each of 21 zones for power engineers of 40 and 80 J. According to the results of the tests for each organ, pressure and acceleration tolerance curves were obtained, animations of the behavior of organs under shock were created, visualization of the pressure field propagation in organs was obtained torso.

Dynamic Modeling and Control Techniques for a Quadrotor

2019 ◽  
pp. 20-66
Author(s):  
Heba Elkholy ◽  
Maki K. Habib
Keyword(s):  
Pid Controller ◽  
Degrees Of Freedom ◽  
Sliding Mode ◽  
Dynamic Performance ◽  
Simulation Environment ◽  
Modeling And Control ◽  
Controller Gain ◽  
Aerial Vehicle ◽  
And Control ◽  
The Mathematical Model

This chapter presents the detailed dynamic model of a Vertical Take-Off and Landing (VTOL) type Unmanned Aerial Vehicle (UAV) known as the quadrotor. The mathematical model is derived based on Newton Euler formalism. This is followed by the development of a simulation environment on which the developed model is verified. Four control algorithms are developed to control the quadrotor's degrees of freedom: a linear PID controller, Gain Scheduling-based PID controller, nonlinear Sliding Mode, and Backstepping controllers. The performances of these controllers are compared through the developed simulation environment in terms of their dynamic performance, stability, and the effect of possible disturbances.

Study of Topology and Control Strategy of the Bidirectional Energy Storage Converter Based on Three-Level

2013 ◽  
Vol 397-400 ◽  
pp. 1169-1173
Author(s):  
Hong Wei Tang ◽  
Xi Kun Chen ◽  
Yan Xia Gao
Keyword(s):  
Mathematical Model ◽  
Energy Storage ◽  
Control Strategy ◽  
Lithium Battery ◽  
Decoupling Control ◽  
Midpoint Potential ◽  
Simulation Results ◽  
And Control ◽  
The Mathematical Model ◽  
Battery Module

To adapt to the requirements of the charging and discharging of the lithium battery, the paper presents a three-level based bidirectional energy storage converter topology.It has strong adaptability and can manage the charge and discharge of multi-series and parallel battery module. The mathematical model of the converter is analyzed, and the two operation modes of the converter control strategy are studied; Analysis the feed-forward decoupling control of three-level rectifier, and the variable scale factor is used to control midpoint potential. The simulation results demonstrate the feasibility of the design.

Optimal Design of Dynamic Secondary Cooling of Continuous Casting

2012 ◽  
Vol 472-475 ◽  
pp. 1907-1910
Author(s):  
Yi Wang ◽  
Xin Jian Ma
Keyword(s):  
Numerical Simulation ◽  
Mathematical Model ◽  
Finite Element ◽  
Continuous Casting ◽  
Cooling System ◽  
Solidification Process ◽  
Element Model ◽  
Secondary Cooling ◽  
The Mathematical Model ◽  
The Finite Element Model

Numerical simulation of the secondary cooling is applied to the design of continuous casting. The mathematical model for solidification process of the strand under air-mist was established and calculated with the finite element model. The model is used to calculate the feasible operating range of the continuous casting machines. The dynamic secondary cooling system has been analyzed with consideration of the thermo mechanical principles and numerical model. The adequacy of the model has been confirmed with experimental results.

Improved Positioning of Pneumatic Cylinder by Using Flexible Coupling between the Piston and Rod

1992 ◽  
Vol 206 (6) ◽  
pp. 431-435 ◽  
Author(s):  
G V Krejnin ◽  
I L Krivz ◽  
L A Smelov
Keyword(s):  
Mathematical Model ◽  
Computer Simulation ◽  
Parameter Optimization ◽  
Degrees Of Freedom ◽  
Control Parameter ◽  
Pneumatic Cylinder ◽  
Output Link ◽  
Positioning Accuracy ◽  
Flexible Coupling ◽  
And Control

Positioning accuracy of a pneumatic piston drive with flexible coupling between the piston and rod is considered. Improved positioning was expected due to the fact that the rod friction is usually considerably less than the piston friction. When the piston stops under the action of its friction force the rod continues the motion, providing the precision positioning of the output link. A mathematical model of a positioning pneumatic piston drive with two degrees of freedom was generated. Computer simulation of the performance of short and long strokes showed the feasibility of the improved positioning which provided design and control parameter optimization.

A Control System on Soil Temperature

2014 ◽  
Vol 599-601 ◽  
pp. 673-679
Author(s):  
Shi Guo Chen ◽  
Li Hua Hu ◽  
Dong Sheng Wu ◽  
Xue Yong Chen
Keyword(s):  
Mathematical Model ◽  
Control System ◽  
Soil Temperature ◽  
Control Algorithm ◽  
Soil Ecology ◽  
Control Soil ◽  
Pid Algorithm ◽  
And Control ◽  
The Mathematical Model

The soil’s temperature plays an important role of soil ecology research. In order to gain and control soil’ temperature. A control system is proposed for soil’s temperature. And a new control algorithm which is based on the PID algorithm is designed in the control system to handle the complex change of the soil’s temperature. It does not need to know the mathematical model of soil’s temperature. At last, the control result is analyzed in this paper. The result shows that the soil’s temperature is controlled ideal by this control system which is accurate to 0.5°C.

Sign in / Sign up

Export Citation Format

Share Document