An Evaluation of Wave Impact Indicators

2009 ◽  
Author(s):  
Zhigang Tian
Keyword(s):  
Wave Breaking ◽  
Offshore Structures ◽  
Phase Method ◽  
Impact Loads ◽  
Wave Steepness ◽  
Wave Load ◽  
Wave Impact ◽  
Large Wave ◽  
Impact Indicators ◽  
Local Wave

Wave impact on offshore structures has been the focus of several studies, due to its significant effect on offshore operations. We evaluate several parameters (wave impact indicators) which can be adopted to indicate the possibility of wave impact on offshore structures due to extreme waves. The indicators can be estimated quickly with given sea states, and thus may provide useful information to offshore structure designers at early design phases. Definitions of three wave impact indicators are presented and discussed. The first indicator, Ψ, is proposed by Stansberg (2008). The second one considered is a wave breaking parameter, μ, originally presented by Song and Banner (2002) in their construction of a wave breaking criterion. Finally, we propose a more generalized impact indicator, βn. The subscript n indicates its dependence on local wave steepness. Our study demonstrates that the three indicators are analytically related. To evaluate these indicators numerically, 2nd order random surface waves are generated with random phase method and Two-Dimensional Fast Fourier Transform (2D FFT). Hilbert analysis of the wave signal reveals that all indicators are able to identify steep and energetic waves that may potentially cause large wave impact loads. Further numerical study demonstrates that the quantitative correlation of wave impact loads to μ is less promising than that to Ψ and βn; while βn provides the best relationship to both local wave impact load and global wave load with its dependence on local wave steepness adjusted (i.e. adjusting n). The correlation is independent of sea states. Estimations and recommendations for thresholds of the two impact indicators (i.e. Ψ and βn with n = 1) are made based on model test results. With proper estimation of the thresholds, both indicators can be applied to predict wave impact and wave impact probability in given sea states.

Wave Impact Loads on the Bottom of Flat Decks

2021 ◽  
Author(s):  
Daniel de Oliveira Costa ◽  
Julia Araújo Perim ◽  
Bruno Guedes Camargo ◽  
Joel Sena Sales Junior ◽  
Antonio Carlos Fernandes ◽  
...  
Keyword(s):  
Scale Effects ◽  
Offshore Structures ◽  
Model Tests ◽  
Analytical Models ◽  
Navier Stokes ◽  
Impact Loads ◽  
Wave Impact ◽  
Wave Channel ◽  
Waves And Currents ◽  
The Impact

Abstract Slamming events due to wave impact on the underside of decks might lead to severe and potentially harmful local and/or global loads in offshore structures. The strong nonlinearities during the impact require a robust method for accessing the loads and hinder the use of analytical models. The use of computation fluid dynamics (CFD) is an interesting alternative to estimate the impact loads, but validation through experimental data is still essential. The present work focuses on a flat-bottomed model fixed over the mean free surface level submitted to regular incoming waves. The proposal is to reproduce previous studies through CFD and model tests in a different reduced scale to provide extra validation and to identify possible non-potential scale effects such as air compressibility. Numerical simulations are performed in both experiments’ scales. The numerical analysis is performed with a marine dedicated flow solver, FINE™/Marine from NUMECA, which features an unsteady Reynolds-averaged Navier-Stokes (URANS) solver and a finite volume method to build spatial discretization. The multiphase flow is represented through the Volume of Fluid (VOF) method for incompressible and nonmiscible fluids. The new model tests were performed at the wave channel of the Laboratory of Waves and Currents (LOC/COPPE – UFRJ), at the Federal University of Rio de Janeiro.

Investigation and Prediction of Wave Impact Loads on Ship Appendage Shapes

2007 ◽  
Author(s):  
Anne M. Fullerton ◽  
Thomas C. Fu ◽  
David E. Hess
Keyword(s):  
Wave Height ◽  
Impact Force ◽  
Design Guidelines ◽  
Impact Loads ◽  
Wave Steepness ◽  
Wave Impact ◽  
Ship Structures ◽  
Impact Forces ◽  
Hull Structure ◽  
Horizontal Wave

Navy fleet problems with damage to hatches and other appendages after operation in high sea states suggest that wave impact loads may be greater than the current design guidelines of 1000 pounds per square foot (48 kilopascal) (Ship Specification Section 100, General Requirements for Hull Structure and Guidance Manual for Temporary Alterations, NAVSEA S9070-AA-MME-010/SSN, SSBN). These large impact forces not only cause damage to ships and ship structures, they can also endanger the ship’s crew. To design robust marine structures, accurate estimates of all encountered loads are necessary, including the wave impact forces, which are complex and involve wave breaking, making them difficult to estimate numerically. An experiment to investigate wave impact loads was performed at the Naval Surface Warfare Center, Carderock Division in 2005. During this experiment, the horizontal and vertical loads of regular, non-breaking waves on a 12 inch (0.305 m) square plate and a 19.75 inch (0.5 m) diameter horizontal cylinder were measured while varying incident wave height, wavelength, wave steepness, plate angle and immersion level of the plate and cylinder. Wave heights of up to 1.5 feet (0.46 m) were tested, with wavelenghs of up to 30 feet (9.1 m). In all cases, the horizontal wave impact force increased with wave steepness. For some angles, the horizontal wave impact force increased with greater submergence. A feed-forward neural network (FFNN) developed by Applied Simulation Technologies was used to predict the horizontal forces measured during the experiment based on the values of wave height, wavelength, wave steepness, plate angle and immersion level of the plate and cyclinder. A FFNN is a computational method used to develop nonlinear equation systems that use input variables to predict output variables. Predictions of forces from the FFNN compare well with the experimental data, and may be useful in future design of ships and ship structures.

Transducer Qualification for Wave Impact Load Measurements Using Wedge Drop Tests

2015 ◽  
Author(s):  
Zhenjia (Jerry) Huang ◽  
Robert Oberlies ◽  
Don Spencer ◽  
Jang Kim
Keyword(s):  
Impact Load ◽  
Research Work ◽  
Offshore Structures ◽  
Model Tests ◽  
Impact Loads ◽  
Dynamic Impact ◽  
Wave Impact ◽  
Impact Forces ◽  
Industry Practice ◽  
Drop Tests

For the design of offshore structures in harsh wave environments, it is essential to accurately determine the wave impact loads on the structure. To date, robust numerical prediction methods / algorithms for determining wave impact forces on offshore structures do not exist. Model testing continues to be the industry practice for determining wave impact forces on offshore structures. Accurate measurements of wave impact loads in model tests have been challenging for several decades. Transducers require the ability to capture the short duration, dynamic nature and high magnitude of impact loads. In order to qualify transducers for these types of measurements, we need to develop a way to physically impose dynamic impact loads on the transducers and to establish benchmark values that can be used to check the effectiveness of their measurements. In this paper, we present our recent research work on transducer qualification for wave impact load measurements, including their development, numerical analysis and wedge drop model tests. Our findings show that wedge drop tests can be used to impose dynamic impact loads for transducer qualification, and that the Wagner solution and / or validated computational fluid dynamics (CFD) simulations that include the effects of viscosity, compressibility and hydroelasticity can provide the appropriate benchmarking values. Numerical simulation results, model test measurements and findings on transducer qualification are presented and discussed in the paper.

An Approach to Calculate the Probability of Wave Impact on an FPSO Bow

2006 ◽  
Vol 129 (2) ◽  
pp. 73-80 ◽  
Author(s):  
C. Guedes Soares ◽  
R. Pascoal ◽  
E. M. Antão ◽  
A. J. Voogt ◽  
B. Buchner
Keyword(s):  
Free Surface ◽  
Vertical Velocity ◽  
Second Order ◽  
Surface Velocity ◽  
Experimental Program ◽  
Ship Motions ◽  
Wave Steepness ◽  
Wave Impact ◽  
Local Wave ◽  
The Impact

This work aims at characterizing the probability of wave impact and determining the position of impact on an FPSO (floating production storage and offloading platform) bow geometry. In order to determine the instants when impact occurs, an experimental program was performed on a specific bow shape. The bow was instrumented with pressure transducers and the test program, also making use of video recordings, was designed such that it was possible to determine the correlation between undisturbed wave shape and the impact pressure time traces. It has been found that the wave impact at the bow is highly correlated with the local wave steepness, which for very high waves has at least second-order effects. A comparison between the probability distributions of local wave steepness of the experimental undisturbed wave time trace and numerical simulations of second-order wave theory is provided and it confirmed that the latter is very adequate for calculations. The experimental results were further used to determine how the probability of impact varies with free surface vertical velocity. It was found that the significant wave height of the sea state itself does not have significant influence on the result and a regression model was derived for the bow type in the experiments. The proposed model for determining the probability of having an impact is based on combining distributions, adjusted a priori to the numerically generated second-order free surface vertical velocity, and the experimental probability of impact of a known certain seastate and free surface velocity. The analytical description makes it fast and easy to expand to other cases of interest and some example calculations are shown to demonstrate the relative ease of the procedure proposed. The position of the impact is determined by the nonlinear wave crests and the ship motions. The ship motions can be determined based on a linear response to the nonlinear waves considered.

An Approach to Calculate the Probability of Wave Impact on an FPSO Bow

2004 ◽  
Author(s):  
C. Guedes Soares ◽  
R. Pascoal ◽  
E. M. Anta˜o ◽  
A. J. Voogt ◽  
B. Buchner
Keyword(s):  
Impact Load ◽  
Second Order ◽  
Experimental Program ◽  
Ship Motions ◽  
Linear Wave ◽  
Wave Steepness ◽  
Wave Impact ◽  
Non Linear ◽  
Local Wave ◽  
The Impact

This work aims at characterizing the probability of wave impact and expected impact load on the bow geometry of an FPSO. In order to determine the instants when impact occurs, an experimental program was performed on a specific bow shape. The bow was instrumented with pressure transducers and the test program, also making use of video recordings, was designed such that it was possible to determine the correlation between undisturbed wave shape and the impact pressure time traces. It has been found that wave impact at the bow is highly correlated with the local wave steepness, which for very high waves has at least second order effects. A comparison between the probability distributions of local wave steepness of the experimental undisturbed wave time trace and numerical simulations of second order wave theory is provided and it confirmed that the latter is very adequate for calculations. The experimental results were further used to determine how the probability of impact varies with free surface vertical velocity. It was found that the significant wave height of the sea state itself does not have significant influence on the result and a regression model is derived for that type of bow. The proposed model for determining the probability of impact load is based on combining both models. The analytical nature makes it fast and easy to expand to other cases of interest and some example calculations are shown to demonstrate the relative ease of the procedure proposed. The position of the impact is determined by the non-linear wave crests and the ship motions. The ship motions can be determined based on a linear response to the non-linear waves considered.

scholarly journals SPH-FE-Based Numerical Simulation on Dynamic Characteristics of Structure under Water Waves

2020 ◽  
Vol 8 (9) ◽  
pp. 630 ◽  
Author(s):  
Yilin Yang ◽  
Jinzhao Li
Keyword(s):  
Water Column ◽  
Dynamic Characteristics ◽  
Water Waves ◽  
Offshore Structures ◽  
Column Height ◽  
Wave Load ◽  
Fe Method ◽  
Large Wave ◽  
Particle Spacing ◽  
Particle Hydrodynamics

Offshore structures are prone to produce a dynamic response under the effect of large wave load. In this paper, the smoothed particle hydrodynamics coupled with finite element (SPH-FE) method is used to investigate the dynamic characteristics of structure induced by the water waves. The dam break model is assumed to generate water wave. Firstly, the parameter of particle spacing included in the SPH method is examined and the appropriate value is proposed. Subsequently, the present numerical model is validated by comparing with the available results from the literature. Furthermore, the influence of several parameters on the wave load of the structure and the induced dynamic characteristics is studied, including the water column height, the distance between the water column and structure, and the structure stiffness. The results show that the amplification of the wave load on the bottom of structure is greater than that on the upper part of the structure. The increase of structure stiffness results in a decrease in the displacement at the top of structure, but an increase in the hydrodynamic force at the bottom of structure.

On the Distribution of Wave Impact Loads on Offshore Structures

2017 ◽  
Author(s):  
Thomas B. Johannessen ◽  
Øystein Lande ◽  
Øistein Hagen
Keyword(s):  
Model Test ◽  
Load Distribution ◽  
Impact Load ◽  
Peak Load ◽  
Offshore Structures ◽  
Impact Loads ◽  
Test Results ◽  
Wave Impact ◽  
The Impact ◽  
Crest Height

For offshore structures in harsh environments, horizontal wave impact loads should be taken into account in design. Shafts on GBS structures, and columns on semisubmersibles and TLPs are exposed to impact loads. Furthermore, if the crest height exceeds the available freeboard, the deck may also be exposed to wave impact loads. Horizontal loads due to waves impacting on the structure are difficult to quantify. The loads are highly intermittent, difficult to reproduce in model tests, have a very short duration and can be very large. It is difficult to calculate these loads accurately and the statistical challenges associated with estimating a value with a prescribed annual probability of occurrence are formidable. Although the accurate calculation of crest elevation in front of the structure is a significant challenge, industry has considerable experience in handling this problem and the analysis results are usually in good agreement with model test results. The present paper presents a statistical model for the distribution of horizontal slamming pressures conditional on the incident crest height upwave of the structure. The impact load distribution is found empirically from a large database of model test results where the wave impact load was measured simultaneously at a large number of panels together with the incident crest elevation. The model test was carried out on a circular surface piercing column using long simulations of longcrested, irregular waves with a variety of seastate parameters. By analyzing the physics of the process and using the measured crest elevation and the seastate parameters, the impact load distribution model is made seastate independent. The impact model separates the wave impact problem in three parts: – Given an incident crest in a specified seastate, calculate the probability of the crest giving a wave impact load above a threshold. – Given a wave impact event above a threshold, calculate the distribution of the resulting peak load. – Given a peak load, calculate the distribution of slamming pressures at one spatial location. The development of the statistical model is described and it is shown that the model is appropriate for fixed and floating structures and for wave impact with both columns and the deck box.

Wave Impact Experiment of a GBS Model in Large Waves

2017 ◽  
Author(s):  
Zhenjia (Jerry) Huang ◽  
Don Spencer ◽  
Robert Oberlies ◽  
Gracie Watts ◽  
Wenting Xiao
Keyword(s):  
Structural Model ◽  
Probability Distributions ◽  
Offshore Structures ◽  
Model Tests ◽  
Wave Crest ◽  
Maximum Pressure ◽  
Impact Loads ◽  
Wave Impact ◽  
Wave Basin ◽  
The Impact

For the design of offshore structures in harsh wave environments, model testing continues to be the recommended industry practice for determining wave impact forces on offshore structures. Accurate measurements of wave impacts in model tests have been a challenge for several decades. Transducers are required to accurately capture the short duration, high magnitude, and dynamic nature of impact loads. The structural model, transducers, and the transducer mountings need to be designed such that mechanical vibrations in the integrated transducer-mounting-structural model system do not contaminate the wave impact measurements. In this work, the dynamic oscillations in the measurements were controlled through the design and fabrication of transducers, their mounting and the GBS model. Wave crest probability distributions were developed that included fully nonlinear effects. These distributions were used as a benchmark to qualify the waves in the wave calibration tests. The highly stochastic nature of impact loads makes it challenging to obtain converged probability distributions of the maximum impact loads (i.e. forces or pressures) from model tests. To increase the confidence in the statistical values of wave impact loads, a large number of realizations were used for a given sea state. Variability of the maximum pressure due to wave basin effects (such as wait-time between tests) was examined with fifteen repeat tests using the same wave maker control signal. These tests provided insights into the random behavior of the impact loads.

Determination of Wave Impact Loads for the Hebron Gravity Based Structure (GBS)

2014 ◽  
Author(s):  
Robert Oberlies ◽  
Jameel Khalifa ◽  
Jerry Huang ◽  
Steinar Hetland ◽  
Adel Younan ◽  
...  
Keyword(s):  
Newfoundland And Labrador ◽  
Impact Load ◽  
Impact Loads ◽  
Eastern Canada ◽  
Wave Impact ◽  
Planning And Design ◽  
Local Wave ◽  
Design Loads ◽  
Incident Waves

ExxonMobil Canada Properties and its co-venturers are building a gravity based structure (GBS) in Newfoundland and Labrador to be installed on the Hebron Field offshore Eastern Canada. This area is characterized by harsh storms with large waves and high winds. The geometry of the Hebron GBS has an effect on the behavior of the incident waves with regards to their likelihood of breaking onto the shaft. Model tests of the structure in storm waves were executed to provide local wave impact load data on the shaft of the GBS. These tests required significant planning and design of the model, environment, and instrumentation in order to properly satisfy the test objectives. The results of the test showed that the measured wave impact loads on the structure were highly variable, requiring a long-term, response based method to quantify the design loads on an annual exceedance basis. In this paper, we discuss the salient aspects of the model testing effort and the long-term analysis approach which was utilized to define the wave impact loads that were incorporated into the Hebron GBS structural design.

scholarly journals On kinematics of very steep waves

2013 ◽  
Vol 1 (2) ◽  
pp. 1487-1506
Author(s):  
L. Shemer
Keyword(s):  
Wave Breaking ◽  
Wide Spectrum ◽  
Wave Train ◽  
Vertical Acceleration ◽  
Wave Group ◽  
Wave Steepness ◽  
Large Wave ◽  
Wave Parameters ◽  
Steep Waves ◽  
Group Velocities

Abstract. Experiments on extremely steep waves generated in a large wave tank by focusing of a broad-banded wave train serve as a motivation for the theoretical analysis of the conditions leading to wave breaking. Particular attention is given to the crest of the steepest wave where both the horizontal velocity and the vertical acceleration attain their maxima. Analysis is carried out up to the 3rd order in wave steepness. The apparent, Eulerian and Lagrangian accelerations are computed for wave parameters observed in experiments. It is demonstrated that for a wave group with a wide spectrum, the crest propagation velocity differs significantly from both the phase and the group velocities of the peak wave. Conclusions are drawn regarding the applicability of various criteria for wave breaking.

Sign in / Sign up

Export Citation Format

Share Document