Force Measurements and Stationarity Analysis on the Flow Around a Single Square Column With Rounded Edges

2019 ◽  
Author(s):  
Dennis Gambarine ◽  
Arjen Koop ◽  
Gustavo Assi ◽  
Fabiano Rampazzo ◽  
Rodolfo T. Gonçalves
Keyword(s):  
Force Measurement ◽  
Offshore Wind ◽  
Column Height ◽  
Force Measurements ◽  
Offshore Wind Turbines ◽  
Hydrodynamic Behaviour ◽  
Floating Offshore Wind Turbines ◽  
Single Column ◽  
Sharp Edges ◽  
Current Incidence

Abstract Studies about the flow around single column are the preliminary way to understand the behaviour of multi-column systems, e.g. semi-submersible platforms and floating offshore wind turbines. The presence of a rounded edge in a square column can include advantages in the constructive phases, on the other hand, can include difficulty in understanding the hydrodynamic behaviour. With this aim this paper presents a 2dof force measurement for a fixed single square column with and without rounded edges. The columns tested have the aspect ratio (H/L) equal to 1.5 representing the typical column height for multi-column platforms. The aim is to investigate the forces between a single square column with rounded edges and sharp edges in different flow incidence. For both edges a total of seven different current incidence angles were performed; 0, 7.5, 15, 22.5, 30, 37.5 and 45. Reynolds number used for the experiment is equal to 40,000. Additional tests were performed to evaluate a quantitative analysis of the uncertainties due to the repeatability and time length of the experiments. This procedure is necessary for the VV studies of CFD codes, and due to this, the database can be utilized for benchmarking.

Pitch Angle Control of Floating Offshore Wind Turbines by H∞ Control

2014 ◽  
Vol 134 (8) ◽  
pp. 1096-1103 ◽  
Author(s):  
Sho Tsujimoto ◽  
Ségolène Dessort ◽  
Naoyuki Hara ◽  
Keiji Konishi
Keyword(s):  
Wind Turbines ◽  
Pitch Angle ◽  
Offshore Wind ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines

scholarly journals Effect of Roughness of Mussels on Cylinder Forces from a Realistic Shape Modelling

2021 ◽  
Vol 9 (6) ◽  
pp. 598
Author(s):  
Antoine Marty ◽  
Franck Schoefs ◽  
Thomas Soulard ◽  
Christian Berhault ◽  
Jean-Valery Facq ◽  
...  
Keyword(s):  
Marine Species ◽  
Offshore Structures ◽  
Offshore Wind ◽  
Mooring Lines ◽  
Shape Modelling ◽  
Offshore Wind Turbines ◽  
Specific Effects ◽  
Hydrodynamic Loading ◽  
Floating Offshore Wind Turbines ◽  
Realistic Shape

After a few weeks, underwater components of offshore structures are colonized by marine species and after few years this marine growth can be significant. It has been shown that it affects the hydrodynamic loading of cylinder components such as legs and braces for jackets, risers and mooring lines for floating units. Over a decade, the development of Floating Offshore Wind Turbines highlighted specific effects due to the smaller size of their components. The effect of the roughness of hard marine growth on cylinders with smaller diameter increased and the shape should be representative of a real pattern. This paper first describes the two realistic shapes of a mature colonization by mussels and then presents the tests of these roughnesses in a hydrodynamic tank where three conditions are analyzed: current, wave and current with wave. Results are compared to the literature with a similar roughness and other shapes. The results highlight the fact that, for these realistic roughnesses, the behavior of the rough cylinders is mainly governed by the flow and not by their motions.

scholarly journals Impact of Typhoons on Floating Offshore Wind Turbines: A Case Study of Typhoon Mangkhut

2021 ◽  
Vol 9 (5) ◽  
pp. 543
Author(s):  
Jiawen Li ◽  
Jingyu Bian ◽  
Yuxiang Ma ◽  
Yichen Jiang
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Safety Evaluation ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Motion Response ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Coupling Motion

A typhoon is a restrictive factor in the development of floating wind power in China. However, the influences of multistage typhoon wind and waves on offshore wind turbines have not yet been studied. Based on Typhoon Mangkhut, in this study, the characteristics of the motion response and structural loads of an offshore wind turbine are investigated during the travel process. For this purpose, a framework is established and verified for investigating the typhoon-induced effects of offshore wind turbines, including a multistage typhoon wave field and a coupled dynamic model of offshore wind turbines. On this basis, the motion response and structural loads of different stages are calculated and analyzed systematically. The results show that the maximum response does not exactly correspond to the maximum wave or wind stage. Considering only the maximum wave height or wind speed may underestimate the motion response during the traveling process of the typhoon, which has problems in guiding the anti-typhoon design of offshore wind turbines. In addition, the coupling motion between the floating foundation and turbine should be considered in the safety evaluation of the floating offshore wind turbine under typhoon conditions.

scholarly journals Performance Analysis on the Use of Oscillating Water Column in Barge-Based Floating Offshore Wind Turbines

Mathematics ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 475
Author(s):  
Payam Aboutalebi ◽  
Fares M’zoughi ◽  
Izaskun Garrido ◽  
Aitor J. Garrido
Keyword(s):  
Wind Turbines ◽  
Positive Impact ◽  
Offshore Wind ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Water Columns ◽  
Numerical Tools ◽  
Oscillating Water Columns ◽  
The Given ◽  
The Waves

Undesired motions in Floating Offshore Wind Turbines (FOWT) lead to reduction of system efficiency, the system’s lifespan, wind and wave energy mitigation and increment of stress on the system and maintenance costs. In this article, a new barge platform structure for a FOWT has been proposed with the objective of reducing these undesired platform motions. The newly proposed barge structure aims to reduce the tower displacements and platform’s oscillations, particularly in rotational movements. This is achieved by installing Oscillating Water Columns (OWC) within the barge to oppose the oscillatory motion of the waves. Response Amplitude Operator (RAO) is used to predict the motions of the system exposed to different wave frequencies. From the RAOs analysis, the system’s performance has been evaluated for representative regular wave periods. Simulations using numerical tools show the positive impact of the added OWCs on the system’s stability. The results prove that the proposed platform presents better performance by decreasing the oscillations for the given range of wave frequencies, compared to the traditional barge platform.

scholarly journals Switching Control Strategy for Oscillating Water Columns Based on Response Amplitude Operators for Floating Offshore Wind Turbines Stabilization

2021 ◽  
Vol 11 (11) ◽  
pp. 5249
Author(s):  
Payam Aboutalebi ◽  
Fares M’zoughi ◽  
Itziar Martija ◽  
Izaskun Garrido ◽  
Aitor J. Garrido
Keyword(s):  
Switching Control ◽  
Response Amplitude ◽  
Offshore Wind ◽  
Oscillating Water Column ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Water Columns ◽  
Switching Control Strategy ◽  
Response Amplitude Operators ◽  
Oscillating Water Columns

In this article, a new strategy for switching control has been proposed with the aim of reducing oscillations in floating offshore wind turbines. Such oscillations lead to a shortage in the system’s efficiency, lifespan and harvesting capability of wind and wave energies. In order to study the decreasing of undesired oscillations in the system, particularly in pitch and top tower fore-aft movements, a square-shaped platform barge equipped with four symmetric oscillating water columns has been considered. The oscillating water columns’ air flux valves allow to operate the air columns so that to control the barge movements caused by oscillatory motion of the waves. In order to design the control scheme, response amplitude operators have been used to evaluate the performance of the system for a range of wave frequency profiles. These response amplitude operators analysis makes it possible to implement a switching control strategy to adequately regulate the valves opening/closing transition. The obtained results show that the proposed controlled oscillating water column-based barge present a better performance compared to the traditional barge one. In the case study with the period of 10 s, the results indicate the significant oscillation reduction for the controlled oscillating water column-based system compared to the standard barge system by 30.8% in pitch angle and 25% in fore-aft displacement.

Open-Loop Control Co-Design of Floating Offshore Wind Turbines Using Linear Parameter-Varying Models

2021 ◽  
Author(s):  
Athul K. Sundarrajan ◽  
Yong Hoon Lee ◽  
James T. Allison ◽  
Daniel R. Herber
Keyword(s):  
Wind Turbines ◽  
Open Loop ◽  
Offshore Wind ◽  
Linear Parameter ◽  
Design Decisions ◽  
Linear Parameter Varying ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Parameter Varying ◽  
And Control

Abstract This paper discusses a framework to design elements of the plant and control systems for floating offshore wind turbines (FOWTs) in an integrated manner using linear parameter-varying models. Multiple linearized models derived from high-fidelity software are used to model the system in different operating regions characterized by the incoming wind speed. The combined model is then used to generate open-loop optimal control trajectories as part of a nested control co-design strategy that explores the system’s stability and power production in the context of crucial plant and control design decisions. A cost model is developed for the FOWT system, and the effect of plant decisions and subsequent power and stability response of the FOWT is quantified in terms of the levelized cost of energy (LCOE) for that system. The results show that the stability constraints and the plant design decisions affect the turbine’s power and, subsequently, LCOE of the system. The results indicate that a lighter plant in terms of mass can produce the same power for a lower LCOE while still satisfying the constraints.

Software-in-the-Loop Combined Machine Learning for Dynamic Responses Analysis of Floating Offshore Wind Turbines

2021 ◽  
Author(s):  
Peng Chen ◽  
Changhong Hu ◽  
Zhiqiang Hu
Keyword(s):  
Machine Learning ◽  
Experimental Data ◽  
Wind Turbines ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Learning Technology ◽  
Mean Values ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Brute Force Method

Abstract Artificial intelligence (AI) brings a new solution to overcome the challenges of Floating offshore wind turbines (FOWTs) to better predict the dynamic responses with intelligent strategies. A new AI-based software-in-the-loop method, named SADA is introduced in this paper for the prediction of dynamic responses of FOWTs, which is proposed based on an in-house programme DARwind. DARwind is a coupled aero-hydro-servo-elastic in-house program for FOWTs, and a reinforcement learning method with exhaust algorithm and deep deterministic policy gradient (DDPG) are embedded in DARwind as an AI module. Firstly, the methodology is introduced with the selection of Key Disciplinary Parameters (KDPs). Secondly, Brute-force Method and DDPG algorithms are adopted to changes the KDPs’ values according to the feedback of 6DOF motions of Hywind Spar-type platform through comparing the DARwind simulation results and those of basin experimental data. Therefore, many other dynamic responses that cannot be measured in basin experiment can be predicted in good accuracy with SADA method. Finally, the case study of SADA method was conducted and the results demonstrated that the mean values of the platform’s motions can be predicted with higher accuracy. This proposed SADA method takes advantage of numerical-experimental method, basin experimental data and the machine learning technology, which brings a new and promising solution for overcoming the handicap impeding direct use of conventional basin experimental way to analyze FOWT’s dynamic responses during the design phase.

Sign in / Sign up

Export Citation Format

Share Document