Applications of PTC-51 Gas Turbine Inlet Air Conditioning Equipment

2011 ◽  
Author(s):  
Tina L. Toburen
Keyword(s):  
Gas Turbine ◽  
Air Conditioning ◽  
Performance Test ◽  
Early Spring ◽  
Design Phase ◽  
Ambient Conditions ◽  
Ambient Temperatures ◽  
Summer Peak ◽  
Turbine Inlet ◽  
Conditioning Equipment

The ASME Performance Test Code PTC-51 “Gas Turbine Inlet Air Conditioning Equipment” (PTC-51) [1] is currently in its final editing phase prior to publication. This paper will give a brief introduction to the code and outline some examples of how to apply PTC-51 to actual testing scenarios. Many plants are designed for hot summer peak ambient temperatures, but need to be tested in early spring for substantial completion and commercial contractual requirements. PTC-51 puts limits on the ambient conditions in which you can test inlet air conditioning equipment. Understanding these limits during the contract and design phase is critical if code-level testing will be a requirement for final completion.

Good News About Gas Turbine Standards

2011 ◽  
Author(s):  
Robert Putnam ◽  
George Osolsobe
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Air Conditioning ◽  
Performance Test ◽  
Good News ◽  
Performance Requirements ◽  
Turbine Inlet ◽  
Final Development ◽  
Conditioning Equipment

Performance Test Codes (PTC) for gas turbines are about to experience a happy convergence of revisions to three principal documents. Several aspects of gas turbines are under consideration in ASME PTC 22 Gas Turbines, ASME PTC 36 Gas Turbine Installations Sound Emissions and ASME PTC 51 Gas Turbine Inlet Air Conditioning Equipment, all of which are in various stages of final development. These PTCs can be used to specify equipment and to perform verification testing to ensure conformance to performance requirements. This overview of the three PTCs will address the key concerns driving the development of the standards, the general issues addressed and the application and significance of uncertainties relevant to each.

Guidance on Conducting Tests of Inlet Chiller Systems Installed in GT Inlets

2005 ◽  
Author(s):  
Terry B. Sullivan ◽  
Michael Giampetro
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Air Conditioning ◽  
Performance Testing ◽  
Project Team ◽  
Plant Performance ◽  
Timely Manner ◽  
Turbine Inlet ◽  
Plant Equipment ◽  
Conditioning Equipment

This paper provides comprehensive methodology on testing inlet chiller systems that are used for Gas Turbine Inlet Air Conditioning. It will serve as a guiding document for the Inlet Chiller Project Team formed by PTC 51, “Combustion Turbine Inlet Air Conditioning Equipment” for use in scripting that code’s section on Inlet Chiller Performance Testing. This paper shows the conceptual similarities that can be drawn between inlet chiller and overall plant performance testing, as well as detailing the pertinent test scopes and boundaries, identifying expected test objectives, and listing the applicable test boundary parameters to be used for correction. Addressing an industry need, this paper also offers guidance on testing these components / systems at conditions different than design. Current equipment code committees, such as ASME PTC 22 on Gas Turbines, and ASME PTC 46 on Overall Plant Performance Testing, have concluded that inlet air conditioning equipment must be out of service while testing the major plant equipment. This would require the inlet chilling system to be tested separately. This requirement dictates that a technically-sound method of inlet chiller testing be codified in a timely manner.

Short-Term Optimization of a Combined Cycle Power Plant Integrated With an Inlet Air Conditioning Unit

2020 ◽  
Author(s):  
Weimar Mantilla ◽  
José García ◽  
Rafael Guédez ◽  
Alessandro Sorce
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Air Conditioning ◽  
Combined Cycle ◽  
Plant Performance ◽  
Mixed Integer ◽  
Environmental Load ◽  
Turbine Inlet ◽  
The Impact

Abstract Under new scenarios with high shares of variable renewable electricity, combined cycle gas turbines (CCGT) are required to improve their flexibility, in terms of ramping capabilities and part-load efficiency, to help balance the power system. Simultaneously, liberalization of electricity markets and the complexity of its hourly price dynamics are affecting the CCGT profitability, leading the need for optimizing its operation. Among the different possibilities to enhance the power plant performance, an inlet air conditioning unit (ICU) offers the benefit of power augmentation and “minimum environmental load” (MEL) reduction by controlling the gas turbine inlet temperature using cold thermal energy storage and a heat pump. Consequently, an evaluation of a CCGT integrated with this inlet conditioning unit including a day-ahead optimized operation strategy was developed in this study. To establish the hourly dispatch of the power plant and the operation mode of the inlet conditioning unit to either cool down or heat up the gas turbine inlet air, a mixed-integer linear optimization (MILP) was formulated using MATLAB, aiming to maximize the operational profit of the plant within a 24-hours horizon. To assess the impact of the proposed unit operating under this dispatch strategy, historical data of electricity and natural gas prices, as well as meteorological data and CO2 emission allowances price, have been used to perform annual simulations of a reference power plant located in Turin, Italy. Furthermore, different equipment capacities and parameters have been investigated to identify trends of the power plant performance. Lastly, a sensitivity analysis on market conditions to test the control strategy response was also considered. Results indicate that the inlet conditioning unit, together with the dispatch optimization, increases the power plant’s operational profit by achieving a wider operational range, particularly important during peak and off-peak periods. For the specific case study, it is estimated that the net present value of the CCGT integrated with the ICU is 0.5% higher than the power plant without the unit. In terms of technical performance, results show that the unit reduces the minimum environmental load by approximately 1.34% and can increase the net power output by 0.17% annually.

Effects of Intake Air Cooling Performance Improvement on a Two-Shaft Laboratory-Scale Gas Turbine Unit

2007 ◽  
Author(s):  
Hussain Al-Madani ◽  
Teoman Ayhan ◽  
Omar Al-Abbasi
Keyword(s):  
Gas Turbine ◽  
Power Output ◽  
Thermal Efficiency ◽  
Performance Test ◽  
Second Law ◽  
Inlet Temperature ◽  
Air Cooling ◽  
Ambient Conditions ◽  
Proposed Model ◽  
Compressor Inlet

The present study deals with the thermodynamically modelled two-shaft gas turbine system consisting of a cooling unit at the compressor inlet. The system is used to investigate the generated power, thermal efficiency and second law efficiency. The parametric study using this model shows effect of ambient conditions, compressor inlet temperature, and pressure ratios on power output, thermal efficiency and second law efficiency. Theoretical results using the proposed model show that when the compressor inlet temperature is decreased by some kind of cooling systems, the net power output and thermal efficiency increases up to 30% and 23%, respectively. Also, the second law efficiency of the proposed system increases in compression to the specified reference state. It shows that the proposed model is thermodynamically viable. A comparison of the performance test results of the model and the experimental results are in good agreement. The results provide valuable information regarding the gas turbine system and will be useful for designers.

Uncertainty Reduction in Gas Turbine Performance Diagnostics by Accounting for Humidity Effects

2001 ◽  
Author(s):  
K. Mathioudakis ◽  
A. Tsalavoutas
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Ambient Conditions ◽  
Ambient Temperatures ◽  
Turbine Performance ◽  
Industrial Gas Turbines ◽  
Industrial Gas Turbine ◽  
The Impact ◽  
Performance Diagnostics ◽  
Health Parameters

The paper presents an analysis of the effect of ambient humidity on the performance of industrial gas turbines and examines the impact of humidity on methods used for engine condition assessment and fault diagnostics. First, the way of incorporating the effect of humidity into a computer model of gas turbine performance is described. The model is then used to derive parameters indicative of the “health” of a gas turbine and thus diagnose the presence of deterioration or faults. The impact of humidity magnitude on the values of these health parameters is studied and the uncertainty introduced, if humidity is not taken into account, is assessed. It is shown that the magnitude of the effect of humidity depends on ambient conditions and is more severe for higher ambient temperatures. Data from an industrial gas turbine are presented to demonstrate these effects and to show that if humidity is appropriately taken into account, the uncertainty in the estimation of health parameters is reduced

scholarly journals Fog and Overspray Cooling for Gas Turbine Systems With Low Calorific Value Fuels

2006 ◽  
Author(s):  
Jobaidur Rahman Khan ◽  
Ting Wang
Keyword(s):  
Gas Turbine ◽  
Output Power ◽  
Power Output ◽  
Thermal Efficiency ◽  
Gas Turbines ◽  
Alternative Fuels ◽  
Calorific Value ◽  
Ambient Conditions ◽  
Turbine Inlet ◽  
Compressor Power

During the summer, power output and the efficiency of gas turbines deteriorate significantly. Gas turbine inlet air fog cooling is considered a simple and cost-effective method to increase power output as well as, sometimes, thermal efficiency. During fog cooling, water is atomized to micro-scaled droplets and introduced into the inlet airflow. In addition to cooling the inlet air, overspray can further enhance output power by intercooling the compressor. With continued increase of volatility of natural gas prices and concerns regarding national energy security, alternative fuels such as low calorific value (LCV) synthetic gases (syngas) derived from gasification of coal, petroleum coke, or biomass are considered as important common fuels in the future. The effect of fogging/overspray on LCV fuel fired gas turbine systems is not clear. This paper specifically investigates this issue by developing a wet compression thermodynamic model that considers additional water and LCV fuel mass flows, non-stoichiometric combustion, and the auxiliary fuel compressor power. An in-house computational program, FogGT, has been developed to study the theoretical gas turbine performance by fixing the pressure ratio and turbine inlet temperature (TIT) assuming the gas turbine has been designed or modified to take in the additional mass flow rates from overspray and LCV fuels. Two LCV fuels of approximately 8% and 15% of the NG heating values, are considered respectively. Parametric studies have been performed to consider different ambient conditions and various overspray ratios with fuels of different low heating values. The results show, when LCV fuels are burned, the fuel compressor consumes about 10–18% of the turbine output power in comparison with 2% when NG is burned. LCV fueled GT is about 10–16% less efficient than NG fueled GT and produces 10–24% of net output power even though LCV fuels significantly increase fuel compressor power. When LCV fuels are burned, saturated fogging can achieve a net output power increases approximately 1–2%, while 2% overspray can achieve 20% net output enhancement. As the ambient temperature or relative humidity increases, the net output power decreases. Fog/overspray could either slightly increase or decrease the thermal efficiency depending on the ambient conditions.

scholarly journals Gas Turbine Inlet Air Cooling System With Liquid Air

1998 ◽  
Author(s):  
T. Tanaka ◽  
A. Ishikawa ◽  
K. Aoyama ◽  
K. Kishimoto ◽  
Y. Yoshida ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Performance Test ◽  
Cooling System ◽  
Ambient Air ◽  
Air Cooling ◽  
Test Results ◽  
Turbine Inlet ◽  
Compressor Inlet ◽  
Air Cooling System ◽  
Turbine Capacity

Gas turbine performance, especially power output and efficiency, is strongly dependent on ambient air temperature. Gas Turbine Inlet Air Cooling (GTIAC) has the effect of enhancing gas turbine capacity during peak hours in summer season. This paper presents an unique GTIAC system with liquid air, which will produce and store liquid air during off peak periods and spray it directly into the compressor inlet during peak hours. In the summer of 1996, an experimental study using a 150MW base load gas turbine was successfully performed on Chita Power Station to prove this new GTIAC performance. Test results show that the new GTIAC has a big advantage of increasing gas turbine capacity flexibly and economically for peak demands or emergencies.

Thermo-Economic Analysis of Inlet Air Conditioning Methods of a Cogeneration Gas Turbine Plant

2002 ◽  
Author(s):  
M. Nixdorf ◽  
A. Prelipceanu ◽  
D. Hein
Keyword(s):  
Gas Turbine ◽  
Air Conditioning ◽  
Thermal Power ◽  
Evaporative Cooling ◽  
Ambient Air ◽  
Air Cooling ◽  
Ambient Conditions ◽  
Reference Case ◽  
Turbine Plant ◽  
Gas Turbine Plant

The purpose of this work is to investigate the benefits of some different ambient air conditioning methods for reducing the gas turbine intake air temperature in order to enhance the gas turbine power. As a reference case the combined heat and power plant of the campus area of the Technische Universita¨t Mu¨nchen in Garching is considered, which is equipped with an Allison KH501 Cheng Cycle gas turbine. Three novel technical possibilities of ambient air cooling and power augmentation are shown in detail (desiccant dehumidification and evaporative cooling, absorption chiller unit with air cooler, evaporative cooling at increased inlet air pressure). Based on site ambient conditions and measured yearly load lines for heat and electrical power connected with actual cost functions, the potential economic savings are worked out for the different technical modifications using ambient air cooling for power augmentation of the gas turbine plant. The economic operation lines for power and heat, supplied by the modified gas turbine plant, are calculated by a cost optimization system. The results are compared based on investment costs and economic savings by the extended annual electrical and thermal power production of the modified gas turbine plant.

scholarly journals Activity Patterns of Cave-Dwelling Bat Species During Pre-Hibernation Swarming and Post-Hibernation Emergence in the Central Appalachians

Diversity ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 159
Author(s):  
Muthersbaugh ◽  
Ford ◽  
Silvis ◽  
Powers
Keyword(s):  
Activity Patterns ◽  
Total Activity ◽  
Early Spring ◽  
Ambient Conditions ◽  
Zero Crossing ◽  
Ambient Temperatures ◽  
Bat Activity ◽  
Spatio Temporal ◽  
Generalized Linear Mixed Effects ◽  
Patterns And Processes

In North America, bat research efforts largely have focused on summer maternity colonies and winter hibernacula, leaving the immediate pre- and post-hibernation ecology for many species unstudied. Understanding these patterns and processes is critical for addressing potential additive impacts to White-nose Syndrome (WNS)-affected bats, as autumn is a time of vital weight gain and fat resources are largely depleted in early spring in surviving individuals. Our study sought to examine autumn and spring bat activity patterns in the central Appalachian Mountains around three hibernacula to better understand spatio-temporal patterns during staging for hibernation and post-hibernation migration in the post-WNS environment. From early September through November 2015 and 2016, and from early March through April 2016 and 2017, we assessed the effects of distance to hibernacula and ambient conditions on nightly bat activity for Myotis spp. and big brown bats (Eptesicus fuscus) using zero-crossing frequency division bat detectors near cave entrances and 1 km, 2 km, and 3 km distant from caves. Following identification of echolocation calls, we used generalized linear mixed effects models to examine patterns of activity across the landscape over time and relative to weather. Overall bat activity was low at all sample sites during autumn and spring periods except at sites closest to hibernacula. Best-supported models describing bat activity varied, but date and ambient temperatures generally appeared to be major drivers of activity in both seasons. Total activity for all species had largely ceased by mid-November. Spring bat activity was variable across the sampling season, however, some activity was observed as early as mid-March, almost a month earlier than the historically accepted emergence time regionally. Current timing of restrictions on forest management activities that potentially remove day-roosts near hibernacula when bats are active on the landscape may be mismatched with actual spring post-hibernation emergence. Adjustments to the timing of these restrictions during the spring may help to avoid potentially additive negative impacts on WNS-impacted bat species.

Uncertainty Reduction in Gas Turbine Performance Diagnostics by Accounting for Humidity Effects

2002 ◽  
Vol 124 (4) ◽  
pp. 801-808 ◽  
Author(s):  
K. Mathioudakis ◽  
T. Tsalavoutas
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Ambient Conditions ◽  
Ambient Temperatures ◽  
Turbine Performance ◽  
Industrial Gas Turbines ◽  
Industrial Gas Turbine ◽  
The Impact ◽  
Performance Diagnostics ◽  
Health Parameters

The paper presents an analysis of the effect of ambient humidity on the performance of industrial gas turbines and examines the impact of humidity on methods used for engine condition assessment and fault diagnostics. First, the way of incorporating the effect of humidity into a computer model of gas turbine performance is described. The model is then used to derive parameters indicative of the “health” of a gas turbine and thus diagnose the presence of deterioration or faults. The impact of humidity magnitude on the values of these health parameters is studied and the uncertainty introduced, if humidity is not taken into account, is assessed. It is shown that the magnitude of the effect of humidity depends on ambient conditions and is more severe for higher ambient temperatures. Data from an industrial gas turbine are presented to demonstrate these effects and to show that if humidity is appropriately taken into account, the uncertainty in the estimation of health parameters is reduced.

Sign in / Sign up

Export Citation Format

Share Document