Noncontact optical metrologies for Young’s modulus measurements of nanoporous low-k dielectric thin films

2013 ◽  
Vol 7 (1) ◽  
pp. 073094 ◽  
Author(s):  
Brian C. Daly ◽  
Sheldon T. Bailey ◽  
Ratnasingham Sooryakumar ◽  
Sean W. King
Keyword(s):  
Thin Films ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Dielectric Thin Films ◽  
Low K

Advances in metrology for the determination of Young's modulus for low-k dielectric thin films

2012 ◽  
Author(s):  
Sean King ◽  
George A. Antonelli ◽  
Gheorghe Stan ◽  
Robert F. Cook ◽  
R. Sooryakumar
Keyword(s):  
Thin Films ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Dielectric Thin Films ◽  
Low K

Micromechanical Characterization of Dielectric Thin Films

1993 ◽  
Vol 308 ◽  
Author(s):  
James M. Grow
Keyword(s):  
Thin Films ◽  
Young’S Modulus ◽  
Deposition Temperature ◽  
Silicon Oxide ◽  
Young's Modulus ◽  
Chemical Vapor ◽  
Silicon Carbonitride ◽  
Dielectric Thin Films ◽  
Micromechanical Characterization

ABSTRACTA nanoindenter has been used to obtain Young's modulus and hardness data for a variety of dielectric thin films including silicon carbide, boron nitride, silicon carbonitride, and silicon oxide. These films, were synthesized by low pressure and plasma enhanced chemical vapor deposition, and had a thickness from 0.25 to a few microns. For the BN films, the modulus and hardness of the films decreased significantly as the deposition temperature increased while the reverse was true for the SiC films. In both cases, these changes were related to variations in the compositions of the deposits due to the onset of different reactions as the temperature is increased. Silicon carbonitride films oxidized slowly when synthesized at temperatures below 200º C and the Young's modulus of these films increased at higher deposition temperatures. For silicon dioxide, there was little change in the composition of the films over the deposition temperature range investigated (375–475º C), thus correspondingly, small variations in the micromechanical properties of the material. However, moisture and hydrogen removal caused by an anneal at 800º C resulted in an significant increase in the modulus and hardness of these films.

Nanoindentation Measurements on Low-k Porous Silica Thin Films Spin Coated on Silicon Substrates

2003 ◽  
Vol 125 (4) ◽  
pp. 361-367 ◽  
Author(s):  
Xiaoqin Huang ◽  
Assimina A. Pelegri
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Mechanical Properties ◽  
Young’S Modulus ◽  
Microelectromechanical Systems ◽  
Young's Modulus ◽  
Porous Silica ◽  
Silicon Substrates ◽  
Silica Thin Films ◽  
Low K

MEMS (MicroElectroMechanical Systems) are composed of thin films and composite nanomaterials. Although the mechanical properties of their constituent materials play an important role in controlling their quality, reliability, and lifetime, they are often found to be different from their bulk counterparts. In this paper, low-k porous silica thin films spin coated on silicon substrates are studied. The roughness of spin-on coated porous silica films is analyzed with in-situ imaging and their mechanical properties are determined using nanoindentation. A Berkovich type nanoindenter, of a 142.3 deg total included angle, is used and continuous measurements of force and displacements are acquired. It is shown, that the measured results of hardness and Young’s modulus of these films depend on penetration depth. Furthermore, the film’s mechanical properties are influenced by the properties of the substrate, and the reproduction of the force versus displacement curves depends on the quality of the thin film. The hardness of the studied low-k spin coated silica thin film is measured as 0.35∼0.41 GPa and the Young’s modulus is determined as 2.74∼2.94 GPa.

Finite-Element Modeling and Quantitative Measurement Using Scanning Microwave Microscopy to Characterize Dielectric Films

2018 ◽  
Author(s):  
K. A. Rubin ◽  
W. Jolley ◽  
Y. Yang
Keyword(s):  
Thin Films ◽  
Dielectric Film ◽  
Dielectric Constants ◽  
Dielectric Films ◽  
Silicon Substrates ◽  
Fem Modeling ◽  
Dielectric Thin Films ◽  
Microwave Microscopy ◽  
Scanning Microwave Microscopy ◽  
Low K

Abstract Scanning Microwave Impedance Microscopy (sMIM) can be used to characterize dielectric thin films and to quantitatively discern film thickness differences. FEM modeling of the sMIM response provides understanding of how to connect the measured sMIM signals to the underlying properties of the dielectric film and its substrate. Modeling shows that sMIM can be used to characterize a range of dielectric film thicknesses spanning both low-k and medium-k dielectric constants. A model system consisting of SiO2 thin films of various thickness on silicon substrates is used to illustrate the technique experimentally.

scholarly journals Out-of-Plane Thermal Expansion Coefficient and Biaxial Young’s Modulus of Sputtered ITO Thin Films

Coatings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 153
Author(s):  
Chuen-Lin Tien ◽  
Tsai-Wei Lin
Keyword(s):  
Thin Films ◽  
Thermal Expansion ◽  
Thermal Stress ◽  
Young’S Modulus ◽  
Thermal Expansion Coefficient ◽  
Expansion Coefficient ◽  
Young's Modulus ◽  
Heating Temperature ◽  
Glass Substrates ◽  
Ito Thin Films

This paper proposes a measuring apparatus and method for simultaneous determination of the thermal expansion coefficient and biaxial Young’s modulus of indium tin oxide (ITO) thin films. ITO thin films simultaneously coated on N-BK7 and S-TIM35 glass substrates were prepared by direct current (DC) magnetron sputtering deposition. The thermo-mechanical parameters of ITO thin films were investigated experimentally. Thermal stress in sputtered ITO films was evaluated by an improved Twyman–Green interferometer associated with wavelet transform at different temperatures. When the heating temperature increased from 30 °C to 100 °C, the tensile thermal stress of ITO thin films increased. The increase in substrate temperature led to the decrease of total residual stress deposited on two glass substrates. A linear relationship between the thermal stress and substrate heating temperature was found. The thermal expansion coefficient and biaxial Young’s modulus of the films were measured by the double substrate method. The results show that the out of plane thermal expansion coefficient and biaxial Young’s modulus of the ITO film were 5.81 × 10−6 °C−1 and 475 GPa.

Studies of the Coefficient of Thermal Expansion of Low-k ILD Materials by X-Ray Reflectivity

2006 ◽  
Vol 914 ◽  
Author(s):  
George Andrew Antonelli ◽  
Tran M. Phung ◽  
Clay D. Mortensen ◽  
David Johnson ◽  
Michael D. Goodner ◽  
...  
Keyword(s):  
Thin Films ◽  
Thermal Expansion ◽  
Coefficient Of Thermal Expansion ◽  
Chemical Vapor ◽  
Dielectric Materials ◽  
Free Standing ◽  
Dielectric Thin Films ◽  
X Ray ◽  
Chemical Vapor Deposited ◽  
Low K

AbstractThe electrical and mechanical properties of low-k dielectric materials have received a great deal of attention in recent years; however, measurements of thermal properties such as the coefficient of thermal expansion remain minimal. This absence of data is due in part to the limited number of experimental techniques capable of measuring this parameter. Even when data does exist, it has generally not been collected on samples of a thickness relevant to current and future integrated processes. We present a procedure for using x-ray reflectivity to measure the coefficient of thermal expansion of sub-micron dielectric thin films. In particular, we elucidate the thin film mechanics required to extract this parameter for a supported film as opposed to a free-standing film. Results of measurements for a series of plasma-enhanced chemical vapor deposited and spin-on low-k dielectric thin films will be provided and compared.

Microbridge Testing of Thin Films Under Small Deformation

1999 ◽  
Vol 594 ◽  
Author(s):  
T. Y. Zhang ◽  
Y. J. Su ◽  
C. F. Qian ◽  
M. H. Zhao ◽  
L. Q. Chen
Keyword(s):  
Thin Films ◽  
Residual Stress ◽  
Silicon Nitride ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Chemical Vapor ◽  
Small Deformation ◽  
Nitride Film ◽  
Silicon Nitride Film ◽  
Pressure Chemical

AbstractThe present work proposes a novel microbridge testing method to simultaneously evaluate the Young's modulus, residual stress of thin films under small deformation. Theoretic analysis and finite element calculation are conducted on microbridge deformation to provide a closed formula of deflection versus load, considering both substrate deformation and residual stress in the film. Silicon nitride films fabricated by low pressure chemical vapor deposition on silicon substrates are tested to demonstrate the proposed method. The results show that the Young's modulus and residual stress for the annealed silicon nitride film are respectively 202 GPa and 334.9 MPa.

Sign in / Sign up

Export Citation Format

Share Document