Further development of an imaging inspection system for layered surfaces

Author(s):  
Cornelius F. Hahlweg ◽  
Janine Brennförder
Sensors ◽  
2021 ◽  
Vol 21 (22) ◽  
pp. 7531
Author(s):  
Jaromír Klarák ◽  
Ivan Kuric ◽  
Ivan Zajačko ◽  
Vladimír Bulej ◽  
Vladimír Tlach ◽  
...  

Inspection systems are currently an evolving field in the industry. The main goal is to provide a picture of the quality of intermediates and products in the production process. The most widespread sensory system is camera equipment. This article describes the implementation of camera devices for checking the location of the upper on the shoe last. The next part of the article deals with the analysis of the application of laser sensors in this task. The results point to the clear advantages of laser sensors in the inspection task of placing the uppers on the shoe’s last. The proposed method defined the resolution of laser scanners according to the type of scanned surface, where the resolution of point cloud ranged from 0.16 to 0.5 mm per point based on equations representing specific points approximated to polynomial regression in specific places, which are defined in this article. Next, two inspection systems were described, where one included further development in the field of automation and industry 4.0 and with a high perspective of development into the future. The main aim of this work is to conduct analyses of sensory systems for inspection systems and their possibilities for further work mainly based on the resolution and quality of obtained data. For instance, dependency on scanning complex surfaces and the achieved resolution of scanned surfaces.


Author(s):  
Jinwu Qian ◽  
Yanan Zhang ◽  
Weiming Cheng ◽  
Linyong Shen ◽  
Jianliang Su ◽  
...  

Automated probing and inspection inside small pipelines have become a hot topic among the micro-robot researchers in both universities and companies worldwide. The reason for that is the potential applications in nuclear power plants (PWR), civil engineering (gas and water) and in chemical plants and so on. This paper outlines the R & D activities on robotic inspection systems for 20mm-diameter pipelines conducted at Shanghai University in collaboration with NDT Center for Nuclear Industry. The locomotion mechanism comparison and synthesis are covered first. Several robotic inspection systems and different locomotion mechanisms are presented. Further development goals underway are briefly discussed.


Author(s):  
B. J. Hockey

Ceramics, such as Al2O3 and SiC have numerous current and potential uses in applications where high temperature strength, hardness, and wear resistance are required often in corrosive environments. These materials are, however, highly anisotropic and brittle, so that their mechanical behavior is often unpredictable. The further development of these materials will require a better understanding of the basic mechanisms controlling deformation, wear, and fracture.The purpose of this talk is to describe applications of TEM to the study of the deformation, wear, and fracture of Al2O3. Similar studies are currently being conducted on SiC and the techniques involved should be applicable to a wide range of hard, brittle materials.


Author(s):  
Y. Feng ◽  
X. Y. Cai ◽  
R. J. Kelley ◽  
D. C. Larbalestier

The issue of strong flux pinning is crucial to the further development of high critical current density Bi-Sr-Ca-Cu-O (BSCCO) superconductors in conductor-like applications, yet the pinning mechanisms are still much debated. Anomalous peaks in the M-H (magnetization vs. magnetic field) loops are commonly observed in Bi2Sr2CaCu2Oy (Bi-2212) single crystals. Oxygen vacancies may be effective flux pinning centers in BSCCO, as has been found in YBCO. However, it has also been proposed that basal-plane dislocation networks also act as effective pinning centers. Yang et al. proposed that the characteristic scale of the basal-plane dislocation networksmay strongly depend on oxygen content and the anomalous peak in the M-H loop at ˜20-30K may be due tothe flux pinning of decoupled two-dimensional pancake vortices by the dislocation networks. In light of this, we have performed an insitu observation on the dislocation networks precisely at the same region before and after annealing in air, vacuumand oxygen, in order to verify whether the dislocation networks change with varying oxygen content Inall cases, we have not found any noticeable changes in dislocation structure, regardless of the drastic changes in Tc and the anomalous magnetization. Therefore, it does not appear that the anomalous peak in the M-H loops is controlled by the basal-plane dislocation networks.


GeroPsych ◽  
2011 ◽  
Vol 24 (3) ◽  
pp. 143-154 ◽  
Author(s):  
Elmar Gräßel ◽  
Raffaela Adabbo

The burden of caregivers has been intensively researched for the past 30 years and has resulted in a multitude of individual findings. This review illustrates the significance of the hypothetical construct of perceived burden for the further development and design of the homecare situation. Following explanations regarding the term informal caregiver, we derive the construct burden from its conceptual association with the transactional stress model of Lazarus and Folkman. Once the extent and characteristics of burden have been set forth, we then present the impact of perceived burden as the care situation. The question of predictors of burden will lead into the last section from which implications can be derived for homecare and relief of caregivers.


2013 ◽  
Vol 21 (1) ◽  
pp. 24-33 ◽  
Author(s):  
Anne Eschen ◽  
Franzisca Zehnder ◽  
Mike Martin

This article introduces Cognitive Health Counseling 40+ (CH.CO40+), an individualized intervention that is conceptually based on the orchestration model of quality-of-life management ( Martin & Kliegel, 2010 ) and aims at improving satisfaction with cognitive health in adults aged 40 years and older. We describe the theoretically deduced characteristics of CH.CO40+, its target group, its multifactorial nature, its individualization, the application of subjective and objective measures, the role of participants as agents of change, and the rationale for choosing participants’ satisfaction with their cognitive health as main outcome variable. A pilot phase with 15 middle-aged and six older adults suggests that CH.CO40+ attracts, and may be particularly suitable for, subjective memory complainers. Implications of the pilot data for the further development of the intervention are discussed.


Sign in / Sign up

Export Citation Format

Share Document