Preliminary study on optimization of the stationary inverse-geometry digital tomosynthesis: x-ray source array

Author(s):  
Burnyoung Kim ◽  
Jisoo Eom ◽  
Wonhyung Kim ◽  
Seungwan Lee
2015 ◽  
Vol 44 (9) ◽  
pp. 20150098 ◽  
Author(s):  
J Shan ◽  
A W Tucker ◽  
L R Gaalaas ◽  
G Wu ◽  
E Platin ◽  
...  

2014 ◽  
Vol 59 (5) ◽  
pp. 1189-1202 ◽  
Author(s):  
Jongduk Baek ◽  
Bruno De Man ◽  
Jorge Uribe ◽  
Randy Longtin ◽  
Daniel Harrison ◽  
...  

2021 ◽  
Vol 186 (Supplement_1) ◽  
pp. 745-750
Author(s):  
Christina R Inscoe ◽  
Yueh Lee ◽  
Alex J Billingsley ◽  
Connor Puett ◽  
Daniel Nissman ◽  
...  

ABSTRACT Introduction Musculoskeletal injury to extremities is a common issue for both stateside and deployed military personnel, as well as the general public. Superposition of anatomy can make diagnosis difficult using standard clinical techniques. There is a need for increased diagnostic accuracy at the point-of-care for military personnel in both training and operational environments, as well as assessment during follow-up treatment to optimize care and expedite return to service. Orthopedic tomosynthesis is rapidly emerging as an alternative to digital radiography (DR), exhibiting an increase in sensitivity for some clinical tasks, including diagnosis and follow-up of fracture and arthritis. Commercially available digital tomosynthesis systems are large complex devices. A compact device for extremity tomosynthesis (TomoE) was previously demonstrated using carbon nanotube X-ray source array technology. The purpose of this study was to prepare and evaluate the prototype device for an Institutional Review Board-approved patient wrist imaging study and provide initial patient imaging results. Materials and Methods A benchtop device was constructed using a carbon nanotube X-ray source array and a flat panel digital detector. Twenty-one X-ray projection images of cadaveric specimens and human subjects were acquired at incident angles from −20 to +20 degrees in various clinical orientations, with entrance dose calibrated to commercial digital tomosynthesis wrist scans. The projection images were processed with an iterative reconstruction algorithm in 1 mm slices. Reconstruction slice images were evaluated by a radiologist for feature conspicuity and diagnostic accuracy. Results The TomoE image quality was found to provide more diagnostic information than DR, with reconstruction slices exhibiting delineation of joint space, visual conspicuity of trabecular bone, bone erosions, fractures, and clear depiction of normal anatomical features. The scan time was 15 seconds and the skin entrance dose was verified to be 0.2 mGy. Conclusions The TomoE device image quality has been evaluated using cadaveric specimens. Dose was calibrated for a patient imaging study. Initial patient images depict a high level of anatomical detail and an increase in diagnostic value compared to DR.


Coatings ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 37
Author(s):  
Yan Liu ◽  
Taoling Dong ◽  
Kun Zhang ◽  
Fuwei Yang ◽  
Liqin Wang

Targeting cleaning of the artificial gypsum layer on white marble was studied. It was conducted by means of the specific depletion of the calcium and sulfate ions by the barium carbonate scavenger, which led to the continuous dissolution and clearance of gypsum layer. The cleaning effect was evaluated by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX), X-ray diffraction (XRD), capillary suction, and color difference measurement. By this method, only the gypsum layer was cleared away and the carbonate substrate of marble was left intact at the same time. This method will be highly useful for the conservation of marble relics from surface weathering.


2019 ◽  
Vol 964 ◽  
pp. 240-245 ◽  
Author(s):  
Amaliya Rasyida ◽  
Thalyta Rizkha Pradipta ◽  
Sigit Tri Wicaksono ◽  
Vania Mitha Pratiwi ◽  
Yeny Widya Rakhmawati

Utilization of brown algae especially in Madura, where it’s close to Surabaya, only limited for food. This become a reference for developing and increasing the potential of this algae by extracting one of the ingredients, namely alginate. This paper deals with the characterization of sodium alginate extracted from sargassum sp. using modified-purified calcium routes. The extracted sodium alginate will be further used as composite hydrogel materials and compared with commercial sodium alginate. Hereafter, the synthesized composite is expected to be bio-ink for 3d printer. Chemical composition analysis were analyzed using X-Ray Fluorosense (XRF) followed by Fourier-transform infrared spectroscopy (FTIR) analysis to identify the functional group of composite and X-Ray Diffraction (XRD). Furthermore, viscosity bath is performed to compare the viscosity of extracted and commercial one. The result shows that modified-purified calcium routes in the extraction process of sodium alginate is desirable for improving their properties. Interestingly enough, with the goal of using it as bio-ink in 3d printed fabrication, the synthesized composite shows viscosity, 300 cSt, which meets the criteria for bio-ink in 3d printer.


2010 ◽  
Vol 12 (4) ◽  
pp. 53-57 ◽  
Author(s):  
Agata Markowska-Szczupak ◽  
Krzysztof Ulfig ◽  
Barbara Grzmil ◽  
Antoni Morawski

A preliminary study on antifungal effect of TiO2-based paints in natural indoor light The antifungal activity of four commercial photocatalytic paints (KEIM Ecosil ME, Titanium FA, Photo Silicate and Silicate D) in natural indoor light was investigated. The paints contained TiO2 in rutile and anatase crystalline forms as evidenced by means of the X-ray diffraction analysis. In most cases the paints inhibited growth of fungi viz. Trichoderma viride, Aspergillus niger, Coonemeria crustacea, Eurotium herbariorum, and Dactylomyces sp. The KEIM Ecosil ME paint displayed the highest antifungal effect in the light, which could be explained with the highest anatase content. The paint antifungal activity and the fungal sensitivity to the TiO2-mediated photocatalytic reaction both decreased in the following orders: KEIM Ecosil ME > Titanium FA > Photo Silicate > Silicate D and T. viride > Dactylomyces sp. > A. niger > E. herbariorum.


1993 ◽  
Vol 34 (4) ◽  
pp. 346-350 ◽  
Author(s):  
S. Sone ◽  
T. Kasuga ◽  
F. Sakai ◽  
H. Hirano ◽  
K. Kubo ◽  
...  

Dual-energy subtraction digital tomosynthesis with pulsed X-ray and rapid kV switching was used to examine calcifications in pulmonary lesions. The digital tomosynthesis system used included a conventional fluororadiographic TV unit with linear tomographic capabilities, a high resolution videocamera, and an image processing unit. Low-voltage, high-voltage, and soft tissue subtracted or bone subtracted tomograms of any desired layer height were reconstructed from the image data acquired during a single tomographic swing. Calcifications, as well as their characteristics and distribution in pulmonary lesions, were clearly shown. The images also permitted discrimination of calcifications from dense fibrotic lesions. This technique was effective in demonstrating calcifications together with a solitary mass or disseminated nodules.


Sign in / Sign up

Export Citation Format

Share Document