scholarly journals Purification and Characterization of an Extracellular Poly(l-Lactic Acid) Depolymerase from a Soil Isolate,Amycolatopsis sp. Strain K104-1

2001 ◽  
Vol 67 (1) ◽  
pp. 345-353 ◽  
Author(s):  
Kohei Nakamura ◽  
Toshio Tomita ◽  
Naoki Abe ◽  
Yoshiyuki Kamio

ABSTRACT Poly(l-lactic acid) (PLA)-degradingAmycolatopsis sp. strains K104-1 and K104-2 were isolated by screening 300 soil samples for the ability to form clear zones on the PLA-emulsified mineral agar plates. Both of the strains assimilated >90% of emulsified 0.1% (wt/vol) PLA within 8 days under aerobic conditions. A novel PLA depolymerase with a molecular weight of 24,000 was purified to homogeneity from the culture supernatant of strain K104-1. The purified enzyme degraded high-molecular-weight PLA in emulsion and in solid film, ultimately forming lactic acid. The optimum pH for the enzyme activity was 9.5, and the optimum temperature was 55 to 60°C. The PLA depolymerase also degraded casein and fibrin but did not hydrolyze collagen type I, triolein, tributyrin, poly(β-hydroxybutyrate), or poly(ε-caprolactone). The PLA-degrading and caseinolytic activities of the enzyme were inhibited by diisopropyl fluorophosphate and phenylmethylsulfonyl fluoride but were not significantly affected by soybean trypsin inhibitor,N-tosyl-l-lysyl chloromethyl ketone,N-tosyl-l-phenylalanyl chloromethyl ketone, and Streptomyces subtilisin inhibitor. Thus, Amycolatopsis sp. strain K104-1 excretes the unique PLA-degrading and fibrinolytic serine enzyme, utilizing extracellular polylactide as a sole carbon source.

2017 ◽  
Vol 872 ◽  
pp. 165-170
Author(s):  
Shi Chao Lu ◽  
Yang Chuan Ke ◽  
Qian Zhou ◽  
Zhao Rui Meng ◽  
Guo Liang Zhang ◽  
...  

The carboxyl terminated poly (L-lactic acid) (PLLA) prepolymers were prepared via polycondensation of L-lactic acid and 1,6-adipic acid (end capping agent) under the catalyst of stannous octoate. The effects of synthetic condition, such as reaction temperature, amount of catalyst, content of the end capping agent, etc, on the molecular weight of PLLA were discussed. Fourier transform infrared and 1H nuclear magnetic resonance were used to characterize the PLLA prepolymers. The results indicated that the polycondensation was performed under an optimum reaction condition as following: the amount of the catalyst was 500 ppm based on the mass of lactic acid, the amount of the end capping agent was 1% (the molar amount of the lactic acid), and the polymerization temperature was 170 °C. The viscosity-average molecular weight of the product reached 2.826×104 at this polymerization temperature and the yield was 73.34%.


2020 ◽  
Vol 35 (Supplement_3) ◽  
Author(s):  
Tianlin He ◽  
Joachim Beige ◽  
Justyna Siwy ◽  
Ralph Wendt ◽  
Agnieszka Latosinska ◽  
...  

Abstract Background and Aims During the last years, with the increase in secondary diseases following obesity the focus on the context of abnormally high body weight and chronic kidney disease (CKD) has changed. While in individual care, CKD along with obesity and improving renal function along with weight loss can be seen frequently and trials on obesity reduction yielded promising renal results, systematic insight into the pathogenesis and epidemiology of nephropathy related to obesity without diabetes (Obesity-related nephropathy, ORN) is rather limited. This work reaches out to investigate impact of BMI on urine peptides and to characterize yet non-specified peptide patterns in urine that may be indicative of ORN and may indicate possible molecular mechanisms of ORN pathophysiology. We used urine samples from earlier projects which could be characterized for presence of diabetes, BMI, eGFR, and age. By defining such urinary peptide patterns, pathophysiology-enlightening hypotheses should be stimulated and pathways suggested to enable specific future characterization of ORN. Method In this study we investigated the association of urinary peptides with body mass index (BMI), and renal function in proteome datasets from 4015 individuals. For this study urinary proteome data stored in the Human Urine Proteome Database obtained by capillary electrophoresis coupled to mass spectrometry (CE-MS) were assessed. Results 365 urinary peptides significantly associated with BMI could be identified. The majority of these peptides were collagen fragments. In addition, most of the peptides also demonstrated a significant concordant association with eGFR in the investigated cohort with diabetes exhibiting no significant association. A classifier based on 150 urine peptides enabled distinguishing non-obese subjects with preserved kidney function from obese, non-diabetic subjects with eGFR>45 mL/min/1.73m in an independent cohort with an area under curve (AUC) of 0.93 (Fig.). The vast majority of significantly associated peptides are specific collagen fragments, most of them from collagen type I, and most of them (in fact all of the 10 most significant ones) are reduced with increasing BMI. Conclusion These analyses in a huge cohort of urine samples from patients with known eGFR, BMI and diabetes status showed a complex multi-level association between peptide fragments with renal risk in obesity. Of particular note, these relationships could be retrieved although the overall cohort inherited an almost negative eGFR – BMI gross correlation, presumably due to the origin of the dataset from a non-obesity-directed approach. Most peptides associated with GFR and BMI belonged to the collagen superfamily and were inversely associated with BMI but directly with eGFR. This concordant observation indicates a reduction of collagen degradation with increasing BMI and/or reduced kidney function. It is tempting to speculate that collagen homeostasis along with body mass on one hand, and kidney function on the other, are substantially interconnected. The very strict association of BMI with collagen fragments was surprising, but also indicates specificity.


2012 ◽  
Vol 114 (5) ◽  
pp. S160-S166 ◽  
Author(s):  
Matthias C. Schulz ◽  
Anja Lode ◽  
Sabine Wittig ◽  
Bernd Stadlinger ◽  
Eberhard Kuhlisch ◽  
...  

2018 ◽  
Vol 9 ◽  
pp. 204173141878982 ◽  
Author(s):  
Elisa Costa ◽  
Cristina González-García ◽  
José Luis Gómez Ribelles ◽  
Manuel Salmerón-Sánchez

Articular chondrocytes are difficult to grow, as they lose their characteristic phenotype following expansion on standard tissue culture plates. Here, we show that culturing them on surfaces of poly(L-lactic acid) of well-defined microtopography allows expansion and maintenance of characteristic chondrogenic markers. We investigated the dynamics of human chondrocyte dedifferentiation on the different poly(L-lactic acid) microtopographies by the expression of collagen type I, collagen type II and aggrecan at different culture times. When seeded on poly(L-lactic acid), chondrocytes maintained their characteristic hyaline phenotype up to 7 days, which allowed to expand the initial cell population approximately six times without cell dedifferentiation. Maintenance of cell phenotype was afterwards correlated to cell adhesion on the different substrates. Chondrocytes adhesion occurs via the α5 β1 integrin on poly(L-lactic acid), suggesting cell–fibronectin interactions. However, α2 β1 integrin is mainly expressed on the control substrate after 1 day of culture, and the characteristic chondrocytic markers are lost (collagen type II expression is overcome by the synthesis of collagen type I). Expanding chondrocytes on poly(L-lactic acid) might be an effective solution to prevent dedifferentiation and improving the number of cells needed for autologous chondrocyte transplantation.


2019 ◽  
Vol 9 (12) ◽  
pp. 1653-1661
Author(s):  
Tiandong Cao ◽  
Fangrui Dong ◽  
Pengfei Zhang ◽  
Jingying Liu ◽  
Zhe Xing ◽  
...  

3D poly(glycerol-sebacate)/poly(L-lactic-acid) (PGS/PLLA) scaffolds, produced by thermally induced phase separation (TIPS) method were treated with oxygen plasma in order to reduce the hydrophobicity of the PGS/PLLA membranes. After the oxygen plasma treatment, the pore size of scaffolds became uniform as well as an increasing in the roughness of the surface. No influence on chemical characteristics such as composition and bond types of PLLA was detected after the treatment. However, the change in the ratio of the scaffold elements before and after the oxygen plasma treatment was detected. Oxygen plasma treatment reduced the average of water contact angle of the TIPS film from 103.7± 10.1 to 64.7± 12.6 at the maximum exposure time (970 s) and power (100 W). The results showed that the goat temporomandibular joint (TMJ) cells attached well to the surface of the oxygen plasma modified scaffold. Furthermore, this modification significantly enhanced cell viability, increased cell proliferation and expression of related genes (Collagen type I mRNA and Collagen type II mRNA). The results demonstrated that it is a promising modification method to promote applications of PGS/PLLA based scaffolds to the regeneration of TMJ discs.


2021 ◽  
Vol 26 (3) ◽  
pp. 319-327
Author(s):  
Gita Syahputra ◽  
Hariyatun Hariyatun ◽  
Muhammad Firdaus ◽  
Pugoh Santoso

Sand sea cucumber (Holothuria scabra) is an aquatic product that belongs to Echinodermata, a habitant in almost all Indonesian seas. The main component of the sea cucumber is protein, one of which is collagen. This study aimed to extract and characterize collagen from the species using the acid-base extraction method. The characterization of sea cucumber collagen includes molecular weight, amino acid components, Fourier transform infrared spectrophotometry, and scanning electron microscopy analysis. This study has successfully extracted collagen from the sample using an extraction system: NaOH 0.1 M; CH3COOH 0.1 M; and distilled water under 45°C treatments, gave 6% yield. The collagen has a molecular weight 110-130 kDa. Based on the infrared spectra, the specific functional groups of the collagen are amide A (3379.29 cm-1), amide B (2924.09 cm-1), amide I (1681.93 cm-1), amide II (1560.41 cm-1), and amide III (1249.87 cm-1). The collagen falls into type I. We suggest an alternative resource of collagen from sand sea cucumber, other than poultry and mammals.   Keywords: characterization, collagen, extraction, fishery, sand sea cucumber


2016 ◽  
Vol 17 (10) ◽  
pp. 3145-3152 ◽  
Author(s):  
Nelda Vázquez-Portalatı́n ◽  
Claire E. Kilmer ◽  
Alyssa Panitch ◽  
Julie C. Liu

2013 ◽  
Vol 440 ◽  
pp. 19-24 ◽  
Author(s):  
Jun Yan Yao ◽  
Loogn Tak Lim ◽  
Yu Jie Li

A feasible and effective method of thermal hydrolysis to prepare poly (lactic acid) (PLA) oligomers with different controlled molecular weight from PLA is presented in this paper. The thermal hydrolytic reaction was carried out by immerging PLA resin pellets in boiling distilled water for a certain period of time. Ester groups in PLA chains are hydrolytically degraded in the presence of water and thermal, so PLA oligomers with different molecular weight were prepared. The structures and properties of PLA oligomers were characterized by FT-IR, GPC, DSC, etc. The results showed that thermal hydrolytic reaction could effectively reduce the molecular weight of PLA, which declines with the increase of the thermal hydrolytic reaction time. Meanwhile, the content of terminal hydroxyl group, glass transition temperature, melting point of PLA oligomers prepared from thermal hydrolytic reactions exhibit gradual changes with the extension of the thermal hydrolytic time.


Sign in / Sign up

Export Citation Format

Share Document