scholarly journals Statistical Analysis of Pseudomonas aeruginosa Biofilm Development: Impact of Mutations in Genes Involved in Twitching Motility, Cell-to-Cell Signaling, and Stationary-Phase Sigma Factor Expression

2002 ◽  
Vol 68 (4) ◽  
pp. 2008-2017 ◽  
Author(s):  
Arne Heydorn ◽  
Bjarne Ersbøll ◽  
Junichi Kato ◽  
Morten Hentzer ◽  
Matthew R. Parsek ◽  
...  
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Laser Scanning ◽  
Fluorescent Protein ◽  
Current Model ◽  
Flow Chamber ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Wild Type ◽  
Time Points ◽  
Biofilm Development

ABSTRACT Four strains of Pseudomonas aeruginosa (wild type, ΔpilHIJK mutant, lasI mutant, and rpoS mutant) were genetically tagged with the green fluorescent protein, and the development of flow chamber-grown biofilms by each of them was investigated by confocal laser scanning microscopy. The structural developments of the biofilms were quantified by the computer program COMSTAT (A. Heydorn, A. T. Nielsen, M. Hentzer, C. Sternberg, M. Givskov, B. K. Ersbøll, and S. Molin, Microbiology 146:2395-2407, 2000). Two structural key variables, average thickness and roughness, formed the basis for an analysis of variance model comprising the four P. aeruginosa strains, five time points (55, 98, 146, 242, and 314 h), and three independent rounds of biofilm experiments. The results showed that the wild type, the ΔpilHIJK mutant, and the rpoS mutant display conspicuously different types of temporal biofilm development, whereas the lasI mutant was indistinguishable from the wild type at all time points. The wild type and the lasI mutant formed uniform, densely packed biofilms. The rpoS mutant formed densely packed biofilms that were significantly thicker than those of the wild type, whereas the ΔpilHIJK mutant formed distinct microcolonies that were regularly spaced and almost uniform in size. The results are discussed in relation to the current model of P. aeruginosa biofilm development.

Alginate production affects Pseudomonas aeruginosa biofilm development and architecture, but is not essential for biofilm formation

2004 ◽  
Vol 53 (7) ◽  
pp. 679-690 ◽  
Author(s):  
Andres Plata Stapper ◽  
Giri Narasimhan ◽  
Dennis E. Ohman ◽  
Johnny Barakat ◽  
Morten Hentzer ◽  
...  
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Fluorescent Protein ◽  
Cell System ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Alginate Production ◽  
Green Fluorescent ◽  
Biofilm Development

Extracellular polymers can facilitate the non-specific attachment of bacteria to surfaces and hold together developing biofilms. This study was undertaken to qualitatively and quantitatively compare the architecture of biofilms produced by Pseudomonas aeruginosa strain PAO1 and its alginate-overproducing (mucA22) and alginate-defective (algD) variants in order to discern the role of alginate in biofilm formation. These strains, PAO1, Alg+ PAOmucA22 and Alg− PAOalgD, tagged with green fluorescent protein, were grown in a continuous flow cell system to characterize the developmental cycles of their biofilm formation using confocal laser scanning microscopy. Biofilm Image Processing (bip) and Community Statistics (comstat) software programs were used to provide quantitative measurements of the two-dimensional biofilm images. All three strains formed distinguishable biofilm architectures, indicating that the production of alginate is not critical for biofilm formation. Observation over a period of 5 days indicated a three-stage development pattern consisting of initiation, establishment and maturation. Furthermore, this study showed that phenotypically distinguishable biofilms can be quantitatively differentiated.

scholarly journals Multiple Roles of Biosurfactants in Structural Biofilm Development by Pseudomonas aeruginosa

2007 ◽  
Vol 189 (6) ◽  
pp. 2531-2539 ◽  
Author(s):  
Sünje Johanna Pamp ◽  
Tim Tolker-Nielsen
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Biofilm Formation ◽  
Initial Phase ◽  
Laser Scanning ◽  
Multiple Roles ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Structural Development ◽  
Biofilm Development ◽  
Later Phase

ABSTRACT Recent studies have indicated that biosurfactants produced by Pseudomonas aeruginosa play a role both in maintaining channels between multicellular structures in biofilms and in dispersal of cells from biofilms. Through the use of flow cell technology and enhanced confocal laser scanning microscopy, we have obtained results which suggest that the biosurfactants produced by P. aeruginosa play additional roles in structural biofilm development. We present genetic evidence that during biofilm development by P. aeruginosa, biosurfactants promote microcolony formation in the initial phase and facilitate migration-dependent structural development in the later phase. P. aeruginosa rhlA mutants, deficient in synthesis of biosurfactants, were not capable of forming microcolonies in the initial phase of biofilm formation. Experiments involving two-color-coded mixed-strain biofilms showed that P. aeruginosa rhlA mutants were defective in migration-dependent development of mushroom-shaped multicellular structures in the later phase of biofilm formation. Experiments involving three-color-coded mixed-strain P. aeruginosa biofilms demonstrated that the wild-type and rhlA and pilA mutant strains formed distinct subpopulations on top of each other dependent on their ability to migrate and produce biosurfactants.

scholarly journals Effect of arsenite on swimming motility delays surface colonization in Herminiimonas arsenicoxydans

Microbiology ◽  
2010 ◽  
Vol 156 (8) ◽  
pp. 2336-2342 ◽  
Author(s):  
M. Marchal ◽  
R. Briandet ◽  
S. Koechler ◽  
B. Kammerer ◽  
P. N. Bertin
Keyword(s):  
Laser Scanning ◽  
Time Course ◽  
Wild Type Strain ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Wild Type ◽  
Arsenite Oxidase ◽  
Swimming Motility ◽  
In The Wild ◽  
Biofilm Development

Herminiimonas arsenicoxydans is a Gram-negative bacterium able to detoxify arsenic-contaminated environments by oxidizing arsenite [As(III)] to arsenate [As(V)] and by scavenging arsenic ions in an extracellular matrix. Its motility and colonization behaviour have been previously suggested to be influenced by arsenite. Using time-course confocal laser scanning microscopy, we investigated its biofilm development in the absence and presence of arsenite. Arsenite was shown to delay biofilm initiation in the wild-type strain; this was partly explained by its toxicity, which caused an increased growth lag time. However, this delayed adhesion step in the presence of arsenite was not observed in either a swimming motility defective fliL mutant or an arsenite oxidase defective aoxB mutant; both strains displayed the wild-type surface properties and growth capacities. We propose that during the biofilm formation process arsenite acts on swimming motility as a result of the arsenite oxidase activity, preventing the switch between planktonic and sessile lifestyles. Our study therefore highlights the existence, under arsenite exposure, of a competition between swimming motility, resulting from arsenite oxidation, and biofilm initiation.

scholarly journals Interactions between Polymorphonuclear Leukocytes and Pseudomonas aeruginosa Biofilms on Silicone ImplantsIn Vivo

2012 ◽  
Vol 80 (8) ◽  
pp. 2601-2607 ◽  
Author(s):  
Maria van Gennip ◽  
Louise Dahl Christensen ◽  
Morten Alhede ◽  
Klaus Qvortrup ◽  
Peter Østrup Jensen ◽  
...  
Keyword(s):  
Immune Response ◽  
Pseudomonas Aeruginosa ◽  
Polymorphonuclear Leukocytes ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Chronic Infections ◽  
Content Type ◽  
Biofilm Development

ABSTRACTChronic infections withPseudomonas aeruginosapersist because the bacterium forms biofilms that are tolerant to antibiotic treatment and the host immune response. Scanning electron microscopy and confocal laser scanning microscopy were used to visualize biofilm developmentin vivofollowing intraperitoneal inoculation of mice with bacteria growing on hollow silicone tubes, as well as to examine the interaction between these bacteria and the host innate immune response. Wild-typeP. aeruginosadeveloped biofilms within 1 day that trapped and caused visible cavities in polymorphonuclear leukocytes (PMNs). In contrast, the number of cells of aP. aeruginosa rhlAmutant that cannot produce rhamnolipids was significantly reduced on the implants by day 1, and the bacteria were actively phagocytosed by infiltrating PMNs. In addition, we identified extracellular wire-like structures around the bacteria and PMNs, which we found to consist of DNA and other polymers. Here we present a novel method to study a pathogen-host interaction in detail. The data presented provide the first direct, high-resolution visualization of the failure of PMNs to protect against bacterial biofilms.

scholarly journals Differential Lipopolysaccharide Core Capping Leads to Quantitative and Correlated Modifications of Mechanical and Structural Properties in Pseudomonas aeruginosa Biofilms

2009 ◽  
Vol 191 (21) ◽  
pp. 6618-6631 ◽  
Author(s):  
Peter C. Y. Lau ◽  
Theresa Lindhout ◽  
Terry J. Beveridge ◽  
John R. Dutcher ◽  
Joseph S. Lam
Keyword(s):  
Mechanical Properties ◽  
Pseudomonas Aeruginosa ◽  
Laser Scanning ◽  
Structural Changes ◽  
Early Stage ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Bacterial Biofilms ◽  
Microbial Infections ◽  
Biofilm Development

ABSTRACT Bacterial biofilms are responsible for the majority of all microbial infections and have profound impact on industrial and geochemical processes. While many studies documented phenotypic differentiation and gene regulation of biofilms, the importance of their structural and mechanical properties is poorly understood. Here we investigate how changes in lipopolysaccharide (LPS) core capping in Pseudomonas aeruginosa affect biofilm structure through modification of adhesive, cohesive, and viscoelastic properties at an early stage of biofilm development. Microbead force spectroscopy and atomic force microscopy were used to characterize P. aeruginosa biofilm interactions with either glass substrata or bacterial lawns. Using isogenic migA, wapR, and rmlC mutants with defined LPS characteristics, we observed significant changes in cell mechanical properties among these strains compared to wild-type strain PAO1. Specifically, truncation of core oligosaccharides enhanced both adhesive and cohesive forces by up to 10-fold, whereas changes in instantaneous elasticity were correlated with the presence of O antigen. Using confocal laser scanning microscopy to quantify biofilm structural changes with respect to differences in LPS core capping, we observed that textural parameters varied with adhesion or the inverse of cohesion, while areal and volumetric parameters were linked to adhesion, cohesion, or the balance between them. In conclusion, this report demonstrated for the first time that changes in LPS expression resulted in quantifiable cellular mechanical changes that were correlated with structural changes in bacterial biofilms. Thus, the interplay between architectural and functional properties may be an important contributor to bacterial community survival.

Confocal and SEM imaging to demonstrate food pathogen- biofilm biocontrol by pyocyanin from Pseudomonas aeruginosa BTRY1

2016 ◽  
Vol 6 (01) ◽  
pp. 5218
Author(s):  
Laxmi Mohandas ◽  
Anju T. R. ◽  
Sarita G. Bhat*
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Antibiofilm Activity ◽  
Opportunistic Pathogens ◽  
Redox Active ◽  
Sem Imaging ◽  
The Impact

An assortment of redox-active phenazine compounds like pyocyanin with their characteristic blue-green colour are synthesized by Pseudomonas aeruginosa, Gram-negative opportunistic pathogens, which are also considered one of the most commercially valuable microorganisms. In this study, pyocyanin from Pseudomonas aeruginosa BTRY1 from food sample was assessed for its antibiofilm activity by micro titer plate assay against strong biofilm producers belonging to the genera Bacillus, Staphylococcus, Brevibacterium and Micrococcus. Pyocyanin inhibited biofilm activity in very minute concentrations. This was also confirmed by Scanning Electron Microscopy (SEM) and Confocal Laser Scanning Microscopy (CLSM). Both SEM and CLSM helped to visualize the biocontrol of biofilm formation by eight pathogens. The imaging and quantification by CLSM also established the impact of pyocyanin on biofilm-biocontrol mainly in the food industry.

scholarly journals Cephalosporin nitric oxide-donor prodrug DEA-C3D disperses biofilms formed by clinical cystic fibrosis isolates of Pseudomonas aeruginosa

2019 ◽  
Vol 75 (1) ◽  
pp. 117-125 ◽  
Author(s):  
Odel Soren ◽  
Ardeshir Rineh ◽  
Diogo G Silva ◽  
Yuming Cai ◽  
Robert P Howlin ◽  
...  
Keyword(s):  
Nitric Oxide ◽  
Cystic Fibrosis ◽  
Pseudomonas Aeruginosa ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Clinical Isolates ◽  
Nitric Oxide Donor ◽  
Confocal Laser ◽  
Broth Microdilution Method

Abstract Objectives The cephalosporin nitric oxide (NO)-donor prodrug DEA-C3D (‘DiEthylAmin-Cephalosporin-3′-Diazeniumdiolate’) has been shown to initiate the dispersal of biofilms formed by the Pseudomonas aeruginosa laboratory strain PAO1. In this study, we investigated whether DEA-C3D disperses biofilms formed by clinical cystic fibrosis (CF) isolates of P. aeruginosa and its effect in combination with two antipseudomonal antibiotics, tobramycin and colistin, in vitro. Methods β-Lactamase-triggered release of NO from DEA-C3D was confirmed using a gas-phase chemiluminescence detector. MICs for P. aeruginosa clinical isolates were determined using the broth microdilution method. A crystal violet staining technique and confocal laser scanning microscopy were used to evaluate the effects of DEA-C3D on P. aeruginosa biofilms alone and in combination with tobramycin and colistin. Results DEA-C3D was confirmed to selectively release NO in response to contact with bacterial β-lactamase. Despite lacking direct, cephalosporin/β-lactam-based antibacterial activity, DEA-C3D was able to disperse biofilms formed by three P. aeruginosa clinical isolates. Confocal microscopy revealed that DEA-C3D in combination with tobramycin produces similar reductions in biofilm to DEA-C3D alone, whereas the combination with colistin causes near complete eradication of P. aeruginosa biofilms in vitro. Conclusions DEA-C3D is effective in dispersing biofilms formed by multiple clinical isolates of P. aeruginosa and could hold promise as a new adjunctive therapy to patients with CF.

scholarly journals The PTS Components in Klebsiella pneumoniae Affect Bacterial Capsular Polysaccharide Production and Macrophage Phagocytosis Resistance

2021 ◽  
Vol 9 (2) ◽  
pp. 335
Author(s):  
Novaria Sari Dewi Panjaitan ◽  
Yu-Tze Horng ◽  
Chih-Ching Chien ◽  
Hung-Chi Yang ◽  
Ren-In You ◽  
...  
Keyword(s):  
Survival Rate ◽  
Klebsiella Pneumoniae ◽  
Laser Scanning ◽  
Bacterial Resistance ◽  
Capsular Polysaccharide ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Intracellular Bacteria ◽  
Wild Type ◽  
Macrophage Phagocytosis

Capsular polysaccharide (CPS) is a crucial virulence factor for Klebsiella pneumoniae infection. We demonstrated an association of CPS production with two phosphoenolpyruvate:carbohydrate phosphotransferase systems (PTSs). Deficiency of crr, encoding enzyme IIA of PTS, in K. pneumoniae enhanced the transcriptional activities of galF, wzi and gnd, which are in the cps gene cluster, leading to high CPS production. A crr mutant exhibited a higher survival rate in 1% hydrogen peroxide than the wild-type. The crr mutant showed less sensitivity to engulfment by macrophage (RAW 264.7) than the wild-type by observing the intracellular bacteria using confocal laser scanning microscopy (CLSM) and by calculating the colony-forming units (CFU) of intracellular bacteria. After long-term incubation, the survival rate of the intracellular crr mutant was higher than that of the wild-type. Deficiency of crr enhanced the transcriptional activities of etcABC which encodes another putative enzyme II complex of a PTS. Deletion of etcABC in the crr mutant reduced CPS production and the transcriptional activities of galF compared to those of the crr mutant. These results indicated that one PTS component, Crr, represses CPS production by repressing another PTS component, EtcABC, in K. pneumoniae. In addition, PTS plays a role in bacterial resistance to macrophage phagocytosis.

scholarly journals Importance of Initial Interfacial Steps during Chalcopyrite Bioleaching by a Thermoacidophilic Archaeon

2020 ◽  
Vol 8 (7) ◽  
pp. 1009
Author(s):  
Camila Safar ◽  
Camila Castro ◽  
Edgardo Donati
Keyword(s):  
High Temperatures ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Copper Recovery ◽  
Confocal Laser ◽  
Mineral Surface ◽  
Thermophilic Microorganisms ◽  
Valuable Metals ◽  
Refractory Mineral ◽  
Biofilm Development

Studies of thermophilic microorganisms have shown that they have a considerable biotechnological potential due to their optimum growth and metabolism at high temperatures. Thermophilic archaea have unique characteristics with important biotechnological applications; many of these species could be used in bioleaching processes to recover valuable metals from mineral ores. Particularly, bioleaching at high temperatures using thermoacidophilic microorganisms can greatly improve metal solubilization from refractory mineral species such as chalcopyrite (CuFeS2), one of the most abundant and widespread copper-bearing minerals. Interfacial processes such as early cell adhesion, biofilm development, and the formation of passive layers on the mineral surface play important roles in the initial steps of bioleaching processes. The present work focused on the investigation of different bioleaching conditions using the thermoacidophilic archaeon Acidianus copahuensis DSM 29038 to elucidate which steps are pivotal during the chalcopyrite bioleaching. Fluorescent in situ hybridization (FISH) and confocal laser scanning microscopy (CLSM) were used to visualize the microorganism–mineral interaction. Results showed that up to 85% of copper recovery from chalcopyrite could be achieved using A. copahuensis. Improvements in these yields are intimately related to an early contact between cells and the mineral surface. On the other hand, surface coverage by inactivated cells as well as precipitates significantly reduced copper recoveries.

scholarly journals Bacterial lipopolysaccharides variably modulate in vitro biofilm formation of Candida species

2010 ◽  
Vol 59 (10) ◽  
pp. 1225-1234 ◽  
Author(s):  
H. M. H. N. Bandara ◽  
O. L. T. Lam ◽  
R. M. Watt ◽  
L. J. Jin ◽  
L. P. Samaranayake
Keyword(s):  
Biofilm Formation ◽  
Laser Scanning ◽  
Significant Inhibition ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Dependent Manner ◽  
Bacterial Lipopolysaccharides ◽  
Species Specific ◽  
Biofilm Development

The objective of this study was to evaluate the effect of the bacterial endotoxin LPS on Candida biofilm formation in vitro. The effect of the LPS of Pseudomonas aeruginosa, Klebsiella pneumoniae, Serratia marcescens and Salmonella typhimurium on six different species of Candida, comprising Candida albicans ATCC 90028, Candida glabrata ATCC 90030, Candida krusei ATCC 6258, Candida tropicalis ATCC 13803, Candida parapsilosis ATCC 22019 and Candida dubliniensis MYA 646, was studied using a standard biofilm assay. The metabolic activity of in vitro Candida biofilms treated with LPS at 90 min, 24 h and 48 h was quantified by XTT reduction assay. Viable biofilm-forming cells were qualitatively analysed using confocal laser scanning microscopy (CLSM), while scanning electron microscopy (SEM) was employed to visualize the biofilm structure. Initially, adhesion of C. albicans was significantly stimulated by Pseudomonas and Klebsiella LPS. A significant inhibition of Candida adhesion was noted for the following combinations: C. glabrata with Pseudomonas LPS, C. tropicalis with Serratia LPS, and C. glabrata, C. parapsilosis or C. dubliniensis with Salmonella LPS (P<0.05). After 24 h of incubation, a significant stimulation of initial colonization was noted for the following combinations: C. albicans/C. glabrata with Klebsiella LPS, C. glabrata/C. tropicalis/C. krusei with Salmonella LPS. In contrast, a significant inhibition of biofilm formation was observed in C. glabrata/C. dubliniensis/C. krusei with Pseudomonas LPS, C. krusei with Serratia LPS, C. dubliniensis with Klebsiella LPS and C. parapsilosis/C. dubliniensis /C. krusei with Salmonella LPS (P<0.05). On further incubation for 48 h, a significant enhancement of biofilm maturation was noted for the following combinations: C. glabrata/C. tropicalis with Serratia LPS, C. dubliniensis with Klebsiella LPS and C. glabrata with Salmonella LPS, and a significant retardation was noted for C. parapsilosis/C. dubliniensis/C. krusei with Pseudomonas LPS, C. tropicalis with Serratia LPS, C. glabrata/C. parapsilosis/C. dubliniensis with Klebsiella LPS and C. dubliniensis with Salmonella LPS (P<0.05). These findings were confirmed by SEM and CLSM analyses. In general, the inhibition of the biofilm development of LPS-treated Candida spp. was accompanied by a scanty architecture with a reduced numbers of cells compared with the profuse and densely colonized control biofilms. These data are indicative that bacterial LPSs modulate in vitro Candida biofilm formation in a species-specific and time-dependent manner. The clinical and the biological relevance of these findings have yet to be explored.

Sign in / Sign up

Export Citation Format

Share Document