GENESIS AND METAMORPHISM OF THE TUTING-TIDDING SUTURE ZONE OPHIOLITES, NORTHEAST HIMALAYA IN AN ANCIENT SUBDUCTION ZONE: CONSTRAINTS FROM GEOCHEMISTRY AND P-T MODELLING

2019 ◽  
Author(s):  
Amrita Dutt ◽  
◽  
Athokapm K. Singh
Keyword(s):  
1989 ◽  
Vol 26 (10) ◽  
pp. 2145-2158 ◽  
Author(s):  
P. K. Sims ◽  
W. R. Van Schmus ◽  
K. J. Schulz ◽  
Z. E. Peterman

The Early Proterozoic Penokean Orogen developed along the southern margin of the Archean Superior craton. The orogen consists of a northern deformed continental margin prism overlying an Archean basement and a southern assemblage of oceanic arcs, the Wisconsin magmatic terranes. The south-dipping Niagara fault (suture) zone separates the south-facing continental margin from the accreted arc terranes. The suture zone contains a dismembered ophiolite.The Wisconsin magmatic terranes consist of two terranes that are distinguished on the basis of lithology and structure. The northern Pembine–Wausau terrane contains a major succession of tholeiitic and calc-alkaline volcanic rocks deposited in the interval 1860–1889 Ma and a more restricted succession of calc-alkaline volcanic rocks deposited about 1835 – 1845 Ma. Granitoid rocks ranging in age from about 1870 to 1760 Ma intrude the volcanic rocks. The older succession was generated as island arcs and (or) closed back-arc basins above the south-dipping subduction zone (Niagara fault zone), whereas the younger one developed as island arcs above a north-dipping subduction zone, the Eau Pleine shear zone. The northward subduction followed deformation related to arc–continent collision at the Niagara suture at about 1860 Ma. The southern Marshfield terrane contains remnants of mafic to felsic volcanic rocks about 1860 Ma that were deposited on Archean gneiss basement, foliated tonalite to granite bodies ranging in age from about 1890 to 1870 Ma, and younger undated granite plutons. Following amalgamation of the two arc terranes along the Eau Pleine suture at about 1840 Ma, intraplate magmatism (1835 Ma) produced rhyolite and anorogenic alkali-feldspar granite that straddled the internal suture.


2010 ◽  
Vol 147 (5) ◽  
pp. 777-788 ◽  
Author(s):  
M. SANTOSH ◽  
V. J. RAJESH ◽  
T. TSUNOGAE ◽  
S. ARAI

AbstractWe report the occurrence and characteristics of diopsidite dykes and veins from the Palghat-Cauvery Suture Zone (PCSZ) marking the boundary between the Archaean Dharwar craton to the north and the Proterozoic Madurai Block to the south, which is considered as a trace of the Cambrian Gondwana suture zone in southern India. The diopsidites are composed predominantly of coarse crystals of diopside [Mg no. (100 Mg/(Mg+Fetot)) up to 89] surrounded by retrograde calcic amphibole, plagioclase and phlogopite with accessory titanite and calcite. The major, trace and rare earth element characteristics of the diopside crystals suggest their formation in a subduction zone setting. We correlate the petrogenesis of the diopsidites with the tectonics associated with the subduction and closure of the Neoproterozoic Mozambique Ocean prior to the final collisional assembly of the Gondwana supercontinent in Cambrian.


2021 ◽  
Author(s):  
István Bozsó ◽  
Ylona van Dinther ◽  
Liviu Matenco ◽  
Attila Balázs ◽  
István Kovács

<p>The Carpathians subduction system evolved similarly to many Mediterranean systems where extensional back-arc basins and separate large sag basins develop in the overriding plate. The evolution of such basins can be explained in the context of roll-back of narrow oceanic slabs. Their evolution is linked to extensional and sag back-arc basins, retreating orogenic systems and slab detachment. A recent example of slab detachment can be studied by the Vrancea slab beneath the SE Carpathians.<br>Significant effort has been dedicated to modelling such Mediterranean-style subduction systems, and in most cases the model was set up with a narrow oceanic domain, which has an increased difficulty to create rollback due to reduced buoyancy of the slab.<br>Our approach is to use a two-dimensional thermo-mechanical numerical model that introduces an inherited oceanic domain, which adds to the younger, narrow ocean developed in the later stages.<br>Our model can produce sustained subduction of the oceanic slab associated with roll-back and slab detachment. In most of our models a retro-arc sag basin develops, which can be interpreted as the Transylvanian Basin. This sag basin is one of the most consistent features of our model. At larger distances from the subduction zone, the extensional back-arc of the Pannonian basin can be modelled by introducing an lithospheric weakness zone, which represents a suture zone inherited from a previous orogenic evolution. Such a suture zone is compatible with the overall orogenic evolution of the Alps-Carpathians-Dinarides system. We furthermore discuss the limitations of our 2D modeling in the overall 3D settings of the Carpathians system and possibilities of future integration.</p>


1983 ◽  
Vol 73 (4) ◽  
pp. 205-219 ◽  
Author(s):  
M. P. Searle

ABSTRACTThe Tibetan–Tethys zone of the Zanskar Himalaya shows a complete Mesozoic shelf carbonate sequence overlying metamorphic basement of the Central crystalline complex and Palaeozoic sedimentary rocks. Continental rifting in the Permian produced the alkaline and basaltic Panjal volcanic rocks and by Triassic time a small ocean basin was developed in the Indus-Tsangpo zone. Stable sedimentation continued until the Middle-Late Cretaceous when a thick sequence of tholeiitic to andesitic island arc lavas (Dras arc) were erupted in the basin above a N-dipping subduction zone. The Spontang ophiolite was emplaced southwards onto the Zanskar shelf edge during latest Cretaceous or earliest Tertiary times.Following emplacement of the Spontang ophiolite, deep-sea sedimentation ended abruptly with initial collision between the Indian plate and the Dras island arc. Emplacement of the massive Ladakh (Trans-Himalayan) batholith along the southern margin of Tibet in late Cretaceous-Eocene time occurred by crustal melting as a result of northward subduction of Mesozoic oceanic crust along the Indus subduction zone. Southward-directed thrusting in both Zanskar and Indus zones accompanied ocean closure during the late Cretaceous–Eocene. Late Tertiary compression caused intense folding, overturning and a phase of northward-directed thrusting along the Indus suture zone and the northern margin of the Tibetan–Tethys zone, resulting in a large amount of crustal shortening.


2018 ◽  
Vol 61 (9) ◽  
pp. 1204-1220 ◽  
Author(s):  
Hanpu Fu ◽  
Xiumian Hu ◽  
Erica M. Crouch ◽  
Wei An ◽  
Jiangang Wang ◽  
...  

1993 ◽  
Vol 30 (8) ◽  
pp. 1650-1659 ◽  
Author(s):  
Wen-Ji Bai ◽  
Mei-Fu Zhou ◽  
Paul T. Robinson

The Luobusa ophiolite of the Yarlung–Zangbo (southern Tibet) suture zone and the Donqiao ophiolite of the Bangong–Nujiang (northern Tibet) suture zone are allochthonous bodies that contain possibly diamond-bearing mantle peridotites and podiform chromitites. The mantle sections in both massifs consist chiefly of harzburgite and diopside-bearing harzburgite with abundant lenses of dunite and chromitite. These ultramafic rocks are more strongly depleted than typical abyssal peridotites and their whole-rock and mineral chemistries suggest formation above a subduction zone. An unusual mineral association (diamond, SiC, graphite, native chromium, Ni–Fe alloy, Cr2+-bearing chromite), indicating a high-pressure, reducing environment, occurs in both the peridotites and chromitites. We suggest that these ophiolites were generated originally in a suprasubduction zone environment and were later carried deep into the mantle along a second subduction zone, at which time the diamonds and other high-pressure minerals were formed. It is not yet clear whether the diamonds formed by high-pressure metamorphism of the oceanic crust or by crystallization from mantle melts, but their occurrence in chromitites and harzburgites suggests a metamorphic origin. During the collision of India with the Eurasian plate, the mantle sections were tectonically emplaced at shallow crustal levels rapidly enough to preserve the diamonds.


2018 ◽  
Vol 156 (5) ◽  
pp. 772-800 ◽  
Author(s):  
FATEMEH NOURI ◽  
YOSHIHIRO ASAHARA ◽  
HOSSEIN AZIZI ◽  
MOTOHIRO TSUBOI

AbstractThe Harsin–Sahneh serpentinized peridotites are widely exposed along the Zagros suture zone in the western region of Iran and are considered to represent remnants of Neo-Tethys oceanic lithosphere at the junction of the Arabian and Iran Plates. These rocks are characterized by low contents of SiO2 (38.8–43.5 wt%), Al2O3 (0.1–3.8 wt%), CaO (0.2–8.2 wt%) and TiO2 (< 1 wt%) and high MgO contents (31.1–46.0 wt%). Their enrichments of large ion lithophile elements and light rare earth elements, with high 87Sr/86Sr(i) values (0.7036–0.7109) and relatively high variations in their εNd(t) (–7.5 to +7.8) values, indicate that the Harsin–Sahneh peridotites were metasomatized by flux released from the oceanic subducting slab in an active margin. The chemical compositions and isotopic ratios of these rocks suggest that they were formed as residue of mid-oceanic ridge basalt in the lithosphere that was then subsequently re-melted and metasomatized in a supra-subduction zone system. The occurrence of both mid-oceanic ridge and supra-subduction zone-type peridotites suggests that the heterogeneity of the upper mantle may have occurred due to the different ratios of partial melting and melt–rock reaction processes in different tectonic settings within the Neo-Tethys realm. The Harsin–Sahneh peridotites provide a good explanation of multistage melt extraction as well as melt–rock and metasomatic reactions in the mantle sequence of the Zagros ophiolite complex.


Sign in / Sign up

Export Citation Format

Share Document