The Age of Gold Mineralization in the Yana–Kolyma Metallogenic Belt, Northeastern Russia: First Data of Re–Os Isotope Geochronology of Native Gold

2021 ◽  
Vol 15 (4) ◽  
pp. 293-306
Author(s):  
V. Yu. Fridovsky ◽  
N. A. Goryachev ◽  
R. Sh. Krymsky ◽  
M. V. Kudrin ◽  
B. V. Belyatsky ◽  
...  
2021 ◽  
Vol 40 (4) ◽  
pp. 18-32
Author(s):  
V.Yu. Fridovsky ◽  
◽  
N.А. Goryachev ◽  
R.Sh. Krymsky ◽  
M.V. Kudrin ◽  
...  

Presented are the first results of studying the Re-Os isotope system of native gold from the orogenic Malo-Taryny, Khangalas, and Bazovsky deposits located in the central part of the Yana-Kolyma metallogenic belt. Re concentration in the sampled gold varies from 0.168 to 6.997 mg/t while that of Os changes from 0.068 to 1.443 mg/t. The data obtained enabled calculation of the isochrone age which is consistent, within the limits of error, with 40Ar-39Ar and К-Аr dates of sericite from the above deposits. The results obtained indicate that gold deposits under study were formed in the interv of 147.8–137.1 Ma synchronously with Late Jurassic – Early Cretaceous orogenic processes in the Yana-Kolyma metallogenic belt and the eastern margin of the Siberian continent. The initial Os isotope ratios ((187Os/188Os)i= 0.1844–0.2475) in the studied samples and fractions of gold from the Malo-Tarynsky, Khangalas and Bazovsky deposits suggest a significant role of a non-radiogenic component, normally associated with mantle sources.


Minerals ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 448 ◽  
Author(s):  
Shun-Da Li ◽  
Zhi-Gao Wang ◽  
Ke-Yong Wang ◽  
Wen-Yan Cai ◽  
Da-Wei Peng ◽  
...  

The Jinchang gold deposit is located in the eastern Yanji–Dongning Metallogenic Belt in Northeast China. The orebodies of the deposit are hosted within granite, diorite, and granodiorite, and are associated with gold-mineralized breccia pipes, disseminated gold in ores, and fault-controlled gold-bearing veins. Three paragenetic stages were identified: (1) early quartz–pyrite–arsenopyrite (stage 1); (2) quartz–pyrite–chalcopyrite (stage 2); and (3) late quartz–pyrite–galena–sphalerite (stage 3). Gold is hosted predominantly within pyrite. Pyrite separated from quartz–pyrite–arsenopyrite cement within the breccia-hosted ores (Py1) yield a Re–Os isochron age of 102.9 ± 2.7 Ma (MSWD = 0.17). Pyrite crystals from the quartz–pyrite–chalcopyrite veinlets (Py2) yield a Re–Os isochron age of 102.0 ± 3.4 Ma (MSWD = 0.2). Pyrite separated from quartz–pyrite–galena–sphalerite veins (Py3) yield a Re–Os isochron age of 100.9 ± 3.1 Ma (MSWD = 0.019). Re–Os isotopic analyses of the three types of auriferous pyrite suggest that gold mineralization in the Jinchang Deposit occurred at 105.6–97.8 Ma (includes uncertainty). The initial 187Os/188Os values of the pyrites range between 0.04 and 0.60, suggesting that Os in the pyrite crystals was derived from both crust and mantle sources.


Minerals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 451
Author(s):  
Galina Palyanova ◽  
Valery Murzin ◽  
Andrey Borovikov ◽  
Nikolay Karmanov ◽  
Sergei Kuznetsov

Composition of native gold and minerals in intergrowth with rhyolites of the Chudnoe Au-Pd-REE deposit (Subpolar Urals, Russia) was studied using optical microscopy, scanning electron microscopy, and electron microprobe analysis. Five varieties of native gold have been identified, based on the set of impurity elements and their quantities, and on intergrown minerals. Native gold in rhyolites from the Ludnaya ore zone is homogeneous and contains only Ag (fineness 720‰, type I). It is in intergrowth with fuchsite or allanite and mertieite-II. In rhyolites from the Slavnaya ore zone, native gold is heterogeneous, has a higher fineness, different sets and contents of elements: Ag, Cu, 840–860‰ (type II); Ag, Cu, Pd, 830–890‰ (III); Ag, Pd, Cu, Hg, 840–870‰ (IV). It occurs in intergrowth with fuchsite, albite, and mertieite-II (type II), or albite, quartz, and atheneite (III), or quartz, albite, K-feldspar, and mertieite-II (IV). High fineness gold (930–1000‰, type V) with low contents of Ag, Cu, and Pd or their absence occurs in the form as microveins, fringes and microinclusions in native gold II–IV. Tetra-auricupride (AuCu) is presented as isometric inclusions in gold II and platelets in the decay structures in gold III and IV. The preliminary data of a fluid inclusions study showed that gold mineralization at the Chudnoe deposit could have been formed by chloride fluids of low and medium salinity at temperatures from 105 to 230 °C and pressures from 5 to 115 MPa. The formation of native gold I is probably related to fuchsitization and allanitization of rhyolites. The formation of native gold II-V is also associated with the same processes, but it is more complicated and occurred later with a significant role of Na-, Si-, and K-metasomatism. The presence of Pd and Cu in the ores and Cr in fuchsite indicates the important role of mafic-ultramafic magmatism.


2008 ◽  
Vol 72 (4) ◽  
pp. 953-970 ◽  
Author(s):  
T. Oberthür ◽  
T. W. Weiser

AbstractGold mineralization at the Viceroy Mine is hosted in extensional veins in steep shear zones that transect metabasalts of the Archaean Arcturus Formation. The gold mineralization is generally made up of banded or massive quartz carrying abundant coarse arsenopyrite. However, most striking is a distinct suite of Au-Bi-Te-S minerals, namely joseite-A (Bi4TeS2), joseite-B (Bi4Te2S), hedleyite (Bi7Te3), ikunolite (Bi4S3), ‘protojoseite’ (Bi3TeS), an unnamed mineral (Bi6Te2S), bismuthinite (Bi2S3), native Bi, native gold, maldonite (Au2Bi), and jonassonite (AuBi5S4). The majority of the Bi-Te-S phases is characterized by Bi/(Se+Te) ratios of >1. Accordingly, this assemblage formed at reduced conditions at relatively low fS2 and fTe2. Fluid-inclusion thermometry indicates depositional temperatures of the main stage of mineralization of up to 342°C, in the normal range of mesothermal, orogenic gold deposits worldwide. However, melting temperatures of Au-Bi-Te phases down to at least 235°C (assemblage (Au2Bi + Bi + Bi7Te3)) imply that the Au-Bi-Te phases have been present as liquids or melt droplets. Furthermore, the close association of native gold, native bismuth and other Bi-Te-S phases suggests that gold was scavenged from the hydrothermal fluids by Bi-Te-S liquids or melts. It is concluded that a liquid/melt-collecting mechanism was probably active at Viceroy Mine, where the distinct Au-Bi-Te-S assemblage either formed late as part of the main, arsenopyrite-dominated mineralization, or it represents a different mineralization event, related to rejuvenation of the shear system. In either case, some of the gold may have been extracted from pre-existing, gold-bearing arsenopyrite by Bi-Te-S melts, thus leading to an upgrade of the gold ores at Viceroy. The Au-Bi-Te-S assemblage represents an epithermal-style mineralization overprinted on an otherwise mesothermal (orogenic) gold mineralization.


Minerals ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 281
Author(s):  
Boris Gerasimov ◽  
Vasily Beryozkin ◽  
Alexander Kravchenko

Precambrian shields and outcropped Precambrian rock complexes in the Arctic may serve as the most important sources of various types of mineral raw materials, including gold. The gold potential of the Anabar shield in the territory of Siberia has, thus far, been poorly studied. A number of primary and placer gold occurrences have been discovered there, but criteria for the prediction of and search for gold mineralization remain unclear. The main purpose of this paper was to study the typomorphic features of placer gold in the central part of the Billyakh tectonic mélange zone in the Anabar shield and to compare them to mineralization from primary sources. To achieve this, we utilized common methods for mineralogical, petrographic, and mineragraphic analyses. Additionally, geochemical data were used. As a result of this investigation, important prospecting guides were identified, and essential criteria for the prediction of and search for gold deposits were elucidated. The characteristics of the studied placer gold were specific for gold derived from a proximal provenance. These characteristics included the poor roundness of the native gold grains, a cloddy–angular and dendritic form, an uneven surface, and a high content of coarse-fraction native gold (0.5–2 mm), which was as high as 24% of the volume of analyzed native gold. In addition, we conducted a study on the mineralogical features of the gold-sulfide mineralization that was disseminated throughout a small exposure area of paleo-Proterozoic para- and orthogneisses in the Anabar shield basement. A comparison of mineral inclusions in the coarse-fraction native gold and mineral assemblages in the ore deposits showed that one of the possible primary sources for placer gold might be small bodies of metasomatically altered orthogneisses associated with large granitoid plutons.


2012 ◽  
Vol 49 (10) ◽  
pp. 1154-1176
Author(s):  
Martin Aucoin ◽  
Georges Beaudoin ◽  
Robert A. Creaser ◽  
Paul Archer

The Corvet Est gold deposit is hosted by Archean rocks of the Superior Province in the James Bay region, northern Quebec, Canada. The Marco zone is hosted by amphibolite-grade, strongly foliated volcanic rocks and consists of disseminated gold, with an apparent thickness ranging from 1.8 to 39.5 m and gold grades up to 23 g·t–1 over 1 m, that is continuous along strike for ∼1.3 km. The lithotectonic sequence comprises footwall basaltic andesite amphibolite overlain by a lenticular unit of metadacite and then by hanging-wall basaltic andesite amphibolite, all intruded by quartz–feldspar porphyry dikes. Dacite, basaltic andesite amphibolite, and quartz–feldspar porphyry show a calc-alkaline to transitional affinity and plot in the plate margin arc basalt field, with typical volcanic arc trace element patterns. Mineralization consists of pyrite, arsenopyrite, pyrrhotite, chalcopyrite, and gold, disseminated in deformed dacite, in andesite amphibolite, and in quartz–feldspar porphyry dikes. Dacite and andesite display weak alteration characterized by silicification. Native gold forms inclusions in metamorphic quartz, garnet, feldspar, arsenopyrite, and pyrite or free grains interstitial to quartz, feldspar, pyrite, chalcopyrite, and arsenopyrite. Free gold in late quartz veins cut the sericitized metamorphic fabric. Inclusion and interstitial native gold within minerals annealed during metamorphism shows that gold mineralization is pre- to syn-metamorphic, with some gold remobilized in later veins. Rhenium–osmium dating of arsenopyrite yields an isochron age of 2663 ± 13 Ma for mineralization and a weighted average model age of 2632 ± 7 Ma for arsenopyrite formed during peak metamorphism. The ∼2663 Ma arsenopyrite has a low initial 187Os/188Os of 0.19 ± 0.10, suggesting a juvenile crust or a mantle Os source. The sulfur isotope composition of Marco zone pyrite and arsenopyrite shows that sulfur could have been leached from its volcanic host rocks or from reduction of Archean seawater. The Corvet Est deposit is interpreted to be an orogenic gold deposit (2663 Ma) deformed and recrystallized during amphibolite-grade metamorphism (2632 Ma).


Author(s):  
Z. Huang ◽  
J. Zheng

Hydrothermal alteration is an important content in the study of epithermal deposit, and its deep part is often accompanied by porphyry mineralization. The objective of research is to mapping the alteration minerals for mineral exploration using mixture tuned matched filtering (MTMF) approach based on airborne hyperspectral data CASI and SASI in Wuyi metallogenic belt, China, which has complex geological structure and excellent mineralization conditions and high regional forest coverage rate. Gold mineralization is closely related to the Yanshan period epithermal intrusive rocks, and often exists in external contact zone of allgovite, monzomite porphyrite, granite porphyry, quarz porphyry, et al.. The main mineral alteration types include silicification (quartz), sericitization (sericite, illite), pyritization (pyrite), chloritization (chlorite), and partial calcitization (calcite). The alteration minerals extraction based on integrated CASI_SASI reflectance data were processed by MTMF algorithm with the input imagery which was pre-processed by MNF and the input endmember spectra measured by SVC spectrometer to performs MF and add an infeasibility image. The MTMF results provide an estimate to mineral subpixel fractions leading to the abundances of alteration minerals at each pixel and alteration minerals distribution. The accuracy of alteration mineral extraction refers to the extent which it agrees with a set of reference data measured in the field reconnaissance. So the CASI_SASI airborne hyperspectral image provides the efficient way to map the detailed alteration minerals distribution for mineral exploration in high forest coverage area.


Minerals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1293
Author(s):  
Yulin Zheng ◽  
Changqing Zhang ◽  
Fudong Jia ◽  
Huan Liu ◽  
Qinggao Yan

The Yao’an gold deposit is located in the middle of the Jinshajiang-Ailaoshan alkali-rich metallogenic belt, and this belt hosts many porphyry-type Cu-Au-Mo deposits formed at 46–33 Ma. Yao’an porphyry gold-mineralization is intimately associated with biotite syenite porphyry, whereas the contemporaneous quartz syenite porphyry is barren. In this study, we compared the major and trace elements of apatite and zircon and isotopic compositions of zircon from the biotite syenite porphyry and quartz syenite porphyry, to explore their geochemical differences that may affect their mineralization potential. The results show that both porphyries were derived from the partial melting of the thickened lower crust, which has been modified by slab-derived fluids, but has different mineral crystallization sequences, magma fluid activities, and magma oxidation states, respectively. REE contents in apatite and zircon can be used to reveal the crystallization sequence of minerals. A rapid decrease of (La/Yb)N ratio in apatite from both porphyries may be caused by the crystallization of allanite. Large variation of Cl contents and negative correlation between F/Cl and (La/Yb)N in apatite from fertile porphyry indicate that it has experienced the exsolution of Cl-bearing hydrothermal fluid. Higher Y/Ho and lower Zr/Hf in zircon from fertile porphyry indicate a stronger fluid activity than barren porphyry. The high S, V, As contents, δEu, low δCe in apatite, as well as high Ce4+/Ce3+ and log(fO2) estimated from zircon geochemistry from fertile porphyry, indicate high a oxidation state of fertile porphyry, similar to other fertile porphyries in this metallogenic belt. High fluid activity and fluid exsolution are conducive to the migration and enrichment of metal elements, which are very important for mineralization. High oxygen fugacity inhibits the precipitation of metal in the form of sulfide, thereby enhancing the mineralization potential of rock. Therefore, the exsolution of Cl-bearing hydrothermal fluid and high oxygen fugacity are the key factors promoting mineralization in Yao’an area.


Minerals ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 229
Author(s):  
Ruoyu Wu ◽  
Jianli Chen ◽  
Jiangnan Zhao ◽  
Jinduo Chen ◽  
Shouyu Chen

The Laowan deposit is a typical gold deposit in the Qinling-Dabie metallogenic belt, which produces the most gold resources in Central China. After being explored for decades, follow-up exploration requires additional theoretical support. In this study, the factor analysis (FA) and spectrum–area (S–A) multifractal model were used to process multi-element geochemical data from 369 samples collected in the study area for identifying the geochemical anomalies associated with gold mineralization. The results showed that: (1) the mean Au content in this region is up to 1000 times higher than the Au background values of the upper crust of the South Qinling unit; (2) the factor analysis revealed that Au, Ag, Cu, As, Sb, and S can be used as direct ore-prospecting criteria; (3) the observed elemental zonation is consistent with the zonation of metallic elements in the magmatic–hydrothermal system. This supports the magmatic–hydrothermal origin of the Laowan deposit; (4) the spectrum–area fractal model can help to decompose the geochemical patterns in a complex geological setting. The decomposed geochemical anomaly map obtained by the S–A multifractal model indicated that highly anomalous areas have a great relationship with the Au occurrence and can be a guidance for further exploration in the study area.


Sign in / Sign up

Export Citation Format

Share Document